Database Users

Galaxy S APK Unlock Problem, urgent.

Hi guys, this is my first post and I just made the biggest error ever.
My S2 was (well, still) locked and I tried to unlock it using the Helroz Galaxy S unlock apk, I made the EFS backup, and then tried to unlock it, my phone rebooted and now I have no signal, no gsm, no NOTHING, my sim is completly blocked, I did *#06# and NO imei found. I still have the EFS backup nv_data.bin etc but when I try to apply the BACKUP from the apk it says the backup or EFS folder is not found.
I have no idea on what to do.. my phone works and wifi works, but 0% signal from sim card.
Urgent help is needed, please guys, I beg you.
Sorry for my bad english

Jonstefad said:
Hi guys, this is my first post and I just made the biggest error ever.
My S2 was (well, still) locked and I tried to unlock it using the Helroz Galaxy S unlock apk, I made the EFS backup, and then tried to unlock it, my phone rebooted and now I have no signal, no gsm, no NOTHING, my sim is completly blocked, I did *#06# and NO imei found. I still have the EFS backup nv_data.bin etc but when I try to apply the BACKUP from the apk it says the backup or EFS folder is not found.
I have no idea on what to do.. my phone works and wifi works, but 0% signal from sim card.
Urgent help is needed, please guys, I beg you.
Sorry for my bad english
Click to expand...
Click to collapse
Download the country specific csc file from here
http://forum.xda-developers.com/showthread.php?t=1075278
Flash it using odin.. Hope it solves.
Report back.
Btw, where r u from?
Sent from my GT-I9100 using XDA Premium App

Im from Paraguay (South America) my "carrier?" is Claro Paraguay..

I dont know if it has something to do with but my phone is rooted, im using Simple & Clean 2.3 ROM with SiyahKernel..

Try this thread.. Ask if you have any queries aftet reading it..
http://forum.xda-developers.com/showthread.php?t=1264021
Sent from my GT-I9100 using XDA Premium App

Went into About Phone and Baseband version says "Unknown" imei is blank too
This is getting worse. damn
Wich one should I donwload from here? http://forum.xda-developers.com/showthread.php?t=1113928
No paraguay in claro section

Athavan said:
Try this thread.. Ask if you have any queries aftet reading it..
http://forum.xda-developers.com/showthread.php?t=1264021
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Ok, I will try that.

PS: I restored my phone's firmware to it's original PDA, Phone and CSC, rooted it with CF-Root, and then done this procedures below
Ok Im stuck, where do I get all of those? OH my god.

Jonstefad said:
PS: I restored my phone's firmware to it's original PDA, Phone and CSC, rooted it with CF-Root, and then done this procedures below
Ok Im stuck, where do I get all of those? OH my god.
Click to expand...
Click to collapse
You can get stock
k fw and csc here
http://forum.xda-developers.com/showthread.php?t=1075278
Ensure that your model no is i9100.
Search xda for cf thread.. Simple
Sent from my GT-I9100 using XDA Premium App

Athavan said:
You can get stock
k fw and csc here
http://forum.xda-developers.com/showthread.php?t=1075278
Ensure that your model no is i9100.
Search xda for cf thread.. Simple
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Yes, I can see, but there is no "Paraguay" ?

@ OP
If you havent tried, copy the EFS folder manually to the root directory and reboot.

bala_gamer said:
@ OP
If you havent tried, copy the EFS folder manually to the root directory and reboot.
Click to expand...
Click to collapse
@op have you tried this??
Sent from my GT-I9100 using XDA Premium App

How can I know wich CF to download? I have no baseband info on my phone, it says Uknown

bala_gamer said:
@ OP
If you havent tried, copy the EFS folder manually to the root directory and reboot.
Click to expand...
Click to collapse
Yes, I have tried that, I rebooted but still nothing.

Op repoting again.
I sent the phone to my carrier and they are going to replace my phone with a new S2.. =/ getting the new one tommorow.
Thanks for those who tried to help .

Jonstefad said:
Op repoting again.
I sent the phone to my carrier and they are going to replace my phone with a new S2.. =/ getting the new one tommorow.
Thanks for those who tried to help .
Click to expand...
Click to collapse
Got the new one? Conclude the thread...
Sent from my GT-I9100 using XDA Premium App

[TOOL] EFS Pro - Advanced '/efs' Backup, Restore, Repair!

I created a tool a while back for Galaxy S II owners to backup and restore the '/efs' partition and perform basic NV Repair on their devices.
This proved so popular that I recently updated the application which now includes a feature to automatically detect the mount point of the '/efs' partition. This allows any supported device to be used with EFS Pro and also adds support for future devices.
Check out the link below for more info and download:
http://forum.xda-developers.com/showthread.php?p=18524176
Enjoy!
Sent from my GT-I9100 using Tapatalk 2

Many thanks lyriquidperfection for providing what is a very under rated tool Your tool once saved my old SGS2 and so this was one of the first things I used on my shiny new SGS3.
Greetings from Eastwood fellow Midlander

ty all for your help guys!

I keep getting an "Installation Aborted" message. I tried on the internal and external SD cards and toggled the signature verification but still get the same. What could cause this?

slonn said:
I keep getting an "Installation Aborted" message. I tried on the internal and external SD cards and toggled the signature verification but still get the same. What could cause this?
Click to expand...
Click to collapse
EFS Pro is a Windows Application.
Sent from my GT-I9100 using Tapatalk 2

D'oh!! Thanks for that...

Improtant Info regarding the use of EFS Pro with Galaxy S III
http://forum.xda-developers.com/showthread.php?p=27298292
Sent from my GT-I9100 using Tapatalk 2

Update!
EFS Pro v1.6.8 update has now been released!!!!
Now includes FULL support for SGS III.
Enjoy!

EFS Pro v1.7.13 is out!
Sent from my GT-I9100 using Tapatalk 2

EFS Pro v1.8.6 is now out! Improved device support and bug fixes.
Sent from my GT-I9100 using Tapatalk 2

Got a question for ya : lyriquidperfection
If you check out this picture its of the root of my EFS folder on my International SG3.
Now before i used your program i flashed a custom rom and made the backup with that as i didnt know about your program when i rooted to use it first before flashing custom.
Now in the root of my efs folder can you tell me what files i can delete in there as there are a lot of files that where probably put there by custom rom.
i just want to know what a stock efs folder looks like so i know what files to keep and what to delete.
cheers.

ViRuS3k said:
Got a question for ya : lyriquidperfection
If you check out this picture its of the root of my EFS folder on my International SG3.
Now before i used your program i flashed a custom rom and made the backup with that as i didnt know about your program when i rooted to use it first before flashing custom.
Now in the root of my efs folder can you tell me what files i can delete in there as there are a lot of files that where probably put there by custom rom.
i just want to know what a stock efs folder looks like so i know what files to keep and what to delete.
cheers.
Click to expand...
Click to collapse
Hi mate, I own a GS2 and I know the efs folder layout is quite different on the GS3. You could try asking the guys in the GS3 forums to shed some light but I would say as long as you have a working efs folder and its been backed up then you will be fine.
Sent from my GT-I9100 using Tapatalk 2

lyriquidperfection said:
Hi mate, I own a GS2 and I know the efs folder layout is quite different on the GS3. You could try asking the guys in the GS3 forums to shed some light but I would say as long as you have a working efs folder and its been backed up then you will be fine.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Yeah everything is working and backed up i just wanted to find out what the stock efs g3 international efs folder looked like and what files where in there.
and fyi i thought i was already in the GS3 forums
: QUESTION for all that own the GS3 International and have backed up there efs folder just after they rooted on there stock rom ect what is the file structure and names of the folders and files please.. would appre****e a file tree of some sort.
cheers.

bump to my question, any international gs3 users please answer ta.

This tool is for?

UnwiredDroid said:
This tool is for?
Click to expand...
Click to collapse
Backing up imei on international samsung devices.
Sent from my GT-I9100 using Tapatalk 2

does USB Debugging have to be enabled?
EDIT: NVM, ran the program and saw that it has to be. Should maybe post this in your thread since I didn't want to start the app without knowing if it must be enabled, and the app only tells you after you start it Vicious cycle.

EFS Professional v2.0.9 has now been released!
http://forum.xda-developers.com/showthread.php?t=1308546
Sent from my GT-I9305 using Tapatalk 2

lyriquidperfection said:
EFS Professional v2.0.9 has now been released!
http://forum.xda-developers.com/showthread.php?t=1308546
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
Hey.. Got a question on this.. If we have an unlocked G3..do we need to do this?
In that what service would it provide?
Understanding it backs up an important partition incase of corruption.. But if you are not locked into a carrier then is it necessary to keep a backup of this information..?
I think I have the answer.. thanks to Mskip..
Q. Why do I need to back up my IMEI/EFS and how do I do it?
There well protected section of your device that is virtually immune to any kind of flashing and manipulation (unless of course you know how to access it). This part of the device contains information such as IMEI (or MEID and ESN in the case of CDMA devices), programming parameters for the device such as your account information (phone number, etc), data provisioning parameters, and a whole bunch of other things that, when not handled properly, can render a device completely useless. All of these are contained in the infamous \EFS folder. If anything messes with your EFS folder, unlike flashing a device (which could potentially lead to bricks as well) it could render your device completely useless as it will no longer be recognized by your carrier. If you are not planning on flashing anything to your device and want to stay on pure Stock then you may never have any problems but it is still advisable to backup this information just in case (better to be safe than sorry). If you have a GT-I9300 GSM Model then you can do this from the Toolkit but if you have an LTE device then it isn't soo easy to do. If you have an LTE device you should go to *THIS* thread by lyriquidperfection and follow the information to save your IMEI/NV Data so that you are covered if anything should happen.
Click to expand...
Click to collapse
Sent from my GT-I9300 using Tapatalk 2Ed

It says my device isn't perm rooted but it is.

HELP!!! lost mi IMEI and I don't have a EFS Backup

Hello, I was trying to unlock my galaxy tab P7500, and for some reason I lost the efs backup, or it got overwritten or something, base line, I don't have the backup, now the IMEI is 004999010640000 and the serial number is 00000000000, obviously, it does not connect to the network, I've tried every post I found that states I can restore my IMEI, flashed older firmware, flashed the original one and many other things, but none seems to work, so now I really don't know what else to do, I know my IMEI number and my serial because is still in the sticker on the back of the tab, and is in the sticker on the box, and is on the purchase receipt.
So any ideas what should I do?
GT-P7500 from movistar venezuela, now on Official ICS LQ8 ITV

Do u still have the imei number that on the back of ur tab? If u do I advise to you is going over to t-mobile gs 3 dev section. They have a tool call nv and imei injection and give it a shot.
Sent from my SGH-T999 using xda app-developers app

tructo said:
Do u still have the imei number that on the back of ur tab? If u do I advise to you is going over to t-mobile gs 3 dev section. They have a tool call nv and imei injection and give it a shot.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
thanks!, is that a web site? or a office? I'm currently in Bogotá, Colombia, so if your advice needs me to take the tab to a t-mob office I think is not going to be possible.

francescopp said:
thanks!, is that a web site? or a office? I'm currently in Bogotá, Colombia, so if your advice needs me to take the tab to a t-mob office I think is not going to be possible.
Click to expand...
Click to collapse
ok, now I got what you ment!! yes i've been trying that way too, but i get stuck because i can seem to find the drivers once is iin modem service mode

Download kies. That should help u hook to pc and remeber to use the original cable. Hope that help
Sent from my SGH-T999 using xda app-developers app

tructo said:
Download kies. That should help u hook to pc and remeber to use the original cable. Hope that help
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
thanks, but I already have kies drivers installed, the drivers I'm missing are the ones needed for the modem service mode, in the device manager it appears as 7 CDCs, and those are the ones I can't find

so?? any more ideas??

Wifi won't work after trying to root. Help!

So I posted a thread here asking for help (the phone was functional at this point) and one user suggested a root method to try out in the comments there http://forum.xda-developers.com/showthread.php?t=2379833
After running this root method my wifi is now dead. It's killing me! Someone please help me out here.
My phone model is a Japanese Softbank 201 M with the 4.1.2 update. It's not rooted but is unlocked. The phone is the developer edition if that helps any.
System version
9.3.102.201M.SBM.en.JP
Model No
201M
Android version
4.1.2
Baseband
SM_T_BP_1539.000.35.03P
Kernel Version
3.0.42-g721d60d
Build Number
9.8.2Q-34_SMJ-102

HBogard said:
So I posted a thread here asking for help (the phone was functional at this point) and one user suggested a root method to try out in the comments there http://forum.xda-developers.com/showthread.php?t=2379833
After running this root method my wifi is now dead. It's killing me! Someone please help me out here.
My phone model is a Japanese Softbank 201 M with the 4.1.2 update. It's not rooted but is unlocked. The phone is the developer edition if that helps any.
System version
9.3.102.201M.SBM.en.JP
Model No
201M
Android version
4.1.2
Baseband
SM_T_BP_1539.000.35.03P
Kernel Version
3.0.42-g721d60d
Build Number
9.8.2Q-34_SMJ-102
Click to expand...
Click to collapse
Ouch. Your WiFi is broken because he told you to flash a US VZW (XT-907) firmware.
Okay. First, you should try to find a 201M restore file. That will get your WiFi back. Next, since you've got a Dev edition, you can bootloader unlock and install a custom recovery, then flash a root zip
EDIT: Found it
http://sbf.droid-developers.org/scorpion_mini_xt902/list.php
Use one of those to restore your WiFi
Sent from my Nexus 7 using Tapatalk 4

sloosecannon said:
Ouch. Your WiFi is broken because he told you to flash a US VZW (XT-907) firmware.
Okay. First, you should try to find a 201M restore file. That will get your WiFi back. Next, since you've got a Dev edition, you can bootloader unlock and install a custom recovery, then flash a root zip
EDIT: Found it
http://sbf.droid-developers.org/scorpion_mini_xt902/list.php
Use one of those to restore your WiFi
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
While the link I gave him was unidentified as to warnings to non vzw users (now fixed) , the flashing of vzw sw comes in step 8 clearly he would have had to have pulled it from a xml himself if he even got that far. And if he did it would have been from reading the rzr op. As the bare motochopper has no vzw sw inside.

aviwdoowks said:
While the link I gave him was unidentified as to warnings to non vzw users (now fixed) , the flashing of vzw sw comes in step 8 clearly he would have had to have pulled it from a xml himself if he even got that far. And if he did it would have been from reading the rzr op. As the bare motochopper has no vzw sw inside.
Click to expand...
Click to collapse
Oh my bad. Thought you sent him to your other post... Still I suspect he got to step 8 and pulled the vz firmware.
OP: Download one of those restore files for the 201M and flash it. That should repair any damage done...
Sent from my Nexus 7 using Tapatalk 4

sloosecannon said:
Oh my bad. Thought you sent him to your other post... Still I suspect he got to step 8 and pulled the vz firmware.
OP: Download one of those restore files for the 201M and flash it. That should repair any damage done...
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I didn't get the system img at all. I just wanted to flash the superuser files to /data which I thought would set me up to flash the whole thing with Rom manager.
Anyway, thank you for the help. I am downloading the firmware you linked to now. This guide tells me to edit the XML file and remove the getvar text from it, should this apply here as well? (Edit: Cant post outside links, but I think you get my point)
I'm going to use RSD 6.1.4 to restore the firmware. Any further instructions would be appreciated as I have never done this before.

HBogard said:
I didn't get the system img at all. I just wanted to flash the superuser files to /data which I thought would set me up to flash the whole thing with Rom manager.
Anyway, thank you for the help. I am downloading the firmware you linked to now. This guide tells me to edit the XML file and remove the getvar text from it, should this apply here as well? (Edit: Cant post outside links, but I think you get my point)
I'm going to use RSD 6.1.4 to restore the firmware. Any further instructions would be appreciated as I have never done this before.
Click to expand...
Click to collapse
Don't think you'll need to since it's designed for your device. You can try without the edit and do it if it doesn't work. I'll try to find a guide for RSDLite (been a while since I used it myself - fastboot is usually what I use now...
Sent from my Nexus 7 using Tapatalk 4

sloosecannon said:
Don't think you'll need to since it's designed for your device. You can try without the edit and do it if it doesn't work. I'll try to find a guide for RSDLite (been a while since I used it myself - fastboot is usually what I use now...
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Dear sir,
I'd like you to buy a ticket to Karachi right now because I'd run all the way to the airport to KISS YOU until the police dragged me away.
The process worked. My wifi just turned back on. Thank you very much for the weekend stress relief!
I think I'm gonna give up on the idea of rooting this thing until there's a more reliable method available. Also, if anyone has the same issue then take note: I did remove the getvar commands when using RSD.

HBogard said:
.....
Click to expand...
Click to collapse
I am glad SC took care of you & I am sorry I lead you in that direction.
Please fill in some details for others?
How do you have a path to the newer sw? Is it your carriers ota? If you can obtain the same in the xml form there is an easy root using a modded ver w/ unlocked phone. The ota.zip could also be useful if you take it while you have root. It resides in /cache.
Thank you

aviwdoowks said:
I am glad SC took care of you & I am sorry I lead you in that direction.
Please fill in some details for others?
How do you have a path to the newer sw? Is it your carriers ota? If you can obtain the same in the xml form there is an easy root using a modded ver w/ unlocked phone. The ota.zip could also be useful if you take it while you have root. It resides in /cache.
Thank you
Click to expand...
Click to collapse
It wasn't your fault for trying to help, so it's ok. I'm glad a solution existed.
I'm more than willing to answer the questions, but I am a layman here so please explain some things for me: What do you mean by SW? I just installed the update by going into about phone -> system update on Wifi. The carriers here don't even support 3G, much less 4G (So now you know why Wifi was important for me).
The phone came unlocked day one when I bought it from a friend's friend. I don't know if he did it that way or if it comes unlocked because it is the developer edition.
I installed CW Recovery using Fastboot. I installed the incorrect superuser file using Motofail which wrote the superuser file but failed at all other steps. I was then unable to either access or remove this superuser apk file.
Since I am back on 4.0.4. now, what's the easy way to get root access and superuser permissions that you mention? I wish other XT902 owners would post here too, generating interest would really help in getting development support for this phone.

HBogard said:
Dear sir,
I'd like you to buy a ticket to Karachi right now because I'd run all the way to the airport to KISS YOU until the police dragged me away.
The process worked. My wifi just turned back on. Thank you very much for the weekend stress relief!
I think I'm gonna give up on the idea of rooting this thing until there's a more reliable method available. Also, if anyone has the same issue then take note: I did remove the getvar commands when using RSD.
Click to expand...
Click to collapse
Lol no problem, glad to know it worked. Getting root is actually really simple since you're unlocked. All you need to do is flash a custom recovery and flash a root .zip from there... No exploits required
I can try to write up a guide to that if you want
Sent from my XT907 using Tapatalk 4

sloosecannon said:
Lol no problem, glad to know it worked. Getting root is actually really simple since you're unlocked. All you need to do is flash a custom recovery and flash a root .zip from there... No exploits required
I can try to write up a guide to that if you want
Sent from my XT907 using Tapatalk 4
Click to expand...
Click to collapse
I tried that, and while it did install superuser, it seemed to have no effect. I couldn't get permissions for any app and using ROM manager's functions would just freeze up that particular application. Any ideas?

HBogard said:
It.
Click to expand...
Click to collapse
Once you root on 404 you can grab your update.zip & copy it to your sd . Any rooting exploit would evolve from that Or the newest xml ver of the 404 you just flashed from rsd. You may be able to request it from your carrier.
---------- Post added at 01:21 PM ---------- Previous post was at 12:40 PM ----------
You can paste the mods from my vzw restore (no vzw software will be used) into the 404 xml & obtain root from a preinstalled cwmr! Then maintain root with voodoo for your ota.
I will help you just read the op. Link is in my signature.

HBogard said:
I tried that, and while it did install superuser, it seemed to have no effect. I couldn't get permissions for any app and using ROM manager's functions would just freeze up that particular application. Any ideas?
Click to expand...
Click to collapse
Hmm... Which zip did you use?
Sent from my XT907 using Tapatalk 4

sloosecannon said:
Hmm... Which zip did you use?
Sent from my XT907 using Tapatalk 4
Click to expand...
Click to collapse
http://www.aosp.us/wp-content/files/Root.zip <- This one.

HBogard said:
http://www.aosp.us/wp-content/files/Root.zip <- This one.
Click to expand...
Click to collapse
I am making a xml to gain root. Which of the two xmls did you flash? & why.
the smj-165 must be newer.

aviwdoowks said:
I am making a xml to gain root. Which of the two xmls did you flash? & why.
the smj-165 must be newer.
Click to expand...
Click to collapse
7.7.1Q-164_SMJ-143_SCORPION_MINI_SBM_SIGNED_CFC
I used this one. Why? I saw them posted somewhere else as while while doing a little research on using RSD and saw that the mirrors on that other link mentioned JP in the file name - I have the Japanese softbank model so I figured this was the one specific to my phone. Turned out to be right.

HBogard said:
http://www.aosp.us/wp-content/files/Root.zip <- This one.
Click to expand...
Click to collapse
Try this. Which recovery are you using? ClockworkMod or TWRP?
Sent from my Nexus 7 using Tapatalk 4

sloosecannon said:
Try this. Which recovery are you using? ClockworkMod or TWRP?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I did use this one. It didn't work for me. Clockwork mod always gave an error for writing superuser.apk or something.

HBogard said:
I did use this one. It didn't work for me. Clockwork mod always gave an error for writing superuser.apk or something.
Click to expand...
Click to collapse
I'm an idiot and forgot the link...
http://forum.xda-developers.com/showthread.php?t=1538053
Sent from my Nexus 7 using Tapatalk 4

HBogard said:
7.7.1Q-164_SMJ-143_SCORPION_MINI_SBM_SIGNED_CFC
I used this one. Why? I saw them posted somewhere else as while while doing a little research on using RSD and saw that the mirrors on that other link mentioned JP in the file name - I have the Japanese softbank model so I figured this was the one specific to my phone. Turned out to be right.
Click to expand...
Click to collapse
Can you upload the xml only ~ 1kb

[System Pull] [LG-H901BK_V10c] T-Mobile LG V10

Hope this helps out. This was after I unlocked bootloader and re-setup my phone (so there are some apps installed). Total unpacked size is 3.26GB, zip is 1.52GB.
Folder - https://drive.google.com/folderview?id=0B5fMrmukgO0NeG12S1U1TlJNX1U&usp=sharing
Full Pull Zip - https://drive.google.com/file/d/0B5fMrmukgO0NOE0zRGZBenNVSDQ/view?usp=sharing

Sorry for the seemingly noob question, but I've unlocked, rooted, installed ROMs, and modded system directories for many years but am unfamiliar with system pulls. What is the purpose of this and how can it be used on the new T-Mobile V10? Thanks.
Sent from my Nexus 6 using Tapatalk

branedamig said:
Sorry for the seemingly noob question, but I've unlocked, rooted, installed ROMs, and modded system directories for many years but am unfamiliar with system pulls. What is the purpose of this and how can it be used on the new T-Mobile V10? Thanks.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
It can't. It's just a dump of the system partition. Usually benefits people with other devices looking for something off this device. Maybe an updated app or lib.

As soon as @TheJesus and I can get online at the same time we might be able to come up with something...

You guys are quick. Just got mine on JoD, but don't want to do too much until we have a way to return to 100% stock.
Very cool!
Sent from my LG-H901 using Tapatalk

KAsp3rd said:
As soon as @TheJesus and I can get online at the same time we might be able to come up with something...
Click to expand...
Click to collapse
If there is anything you guys need from me, LMK.

mikeyinid said:
If there is anything you guys need from me, LMK.
Click to expand...
Click to collapse
what is the sku # for this device?

Rydah805 said:
what is the sku # for this device?
Click to expand...
Click to collapse
Sku #?

rydah805 said:
what is the sku # for this device?
Click to expand...
Click to collapse
sku #: 610214643872

TheJesus said:
sku #: 610214643872
Click to expand...
Click to collapse
I looked and couldn't find it lol. Where did you get it for future reference?

mikeyinid said:
I looked and couldn't find it lol. Where did you get it for future reference?
Click to expand...
Click to collapse
On the box, lol
Sent from my LG-H901 using Tapatalk

TheJesus said:
On the box, lol
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
Bahaha, that was the first place I looked

If someone could modify this to be able to prompt me for an unlock code when I enter a different SIM card, I would be very, very happy. Apparently T-Mobile does something to stop the prompt from coming up, and I want to be able to unlock it almost immediately. I'm on my way to get the phone now, but I don't want to come home with a useless paperweight.
Apparently a similar stock ROM was created for the LG G4 as it had the same problem. I would love to see a ROM for this once TWRP is publicly released for the V10!

TheJesus said:
On the box, lol
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
mikeyinid said:
Bahaha, that was the first place I looked
Click to expand...
Click to collapse
lol thanks guys

ubergeek77 said:
If someone could modify this to be able to prompt me for an unlock code when I enter a different SIM card, I would be very, very happy. Apparently T-Mobile does something to stop the prompt from coming up, and I want to be able to unlock it almost immediately. I'm on my way to get the phone now, but I don't want to come home with a useless paperweight.
Apparently a similar stock ROM was created for the LG G4 as it had the same problem. I would love to see a ROM for this once TWRP is publicly released for the V10!
Click to expand...
Click to collapse
i thought you had to wait at least 15 days since you been using the device to qualify for sim unlocking your phone. tmobile told me that on the phone before.

TheJesus said:
Hope this helps out. This was after I unlocked bootloader and re-setup my phone (so there are some apps installed). Total unpacked size is 3.26GB, zip is 1.52GB.
Folder - https://drive.google.com/folderview?id=0B5fMrmukgO0NeG12S1U1TlJNX1U&usp=sharing
Full Pull Zip - https://drive.google.com/file/d/0B5fMrmukgO0NOE0zRGZBenNVSDQ/view?usp=sharing
Click to expand...
Click to collapse
How do you do a system.img pull if you dont mind me asking through adb?

TheJesus said:
Hope this helps out. This was after I unlocked bootloader and re-setup my phone (so there are some apps installed). Total unpacked size is 3.26GB, zip is 1.52GB.
Folder - https://drive.google.com/folderview?id=0B5fMrmukgO0NeG12S1U1TlJNX1U&usp=sharing
Full Pull Zip - https://drive.google.com/file/d/0B5fMrmukgO0NOE0zRGZBenNVSDQ/view?usp=sharing
Click to expand...
Click to collapse
I have 1 question, is it possible to make a custom rom with the full .zip you uploaded?