I have problem with power button. when push pwr button dont,t off pda, but when hold pwr then lights off.
Power is never shut off in PDAs, thats the way PDAs have been designed.
I have the same problem, he is not talking about a full power down. If you hit the power button quickly the phone does nothing. However if you hold the power button down for about 2-3 seconds the lcd light turns off as it should.
Because of this I have to wait 1 minute for the unit to suspend before putting it back in the holster.
Does anybody have any idea as to why this might be happening. Im not new at this so hard reset, soft reset.. new rom... new radio...turning up side down while chanting. It does not change......
It will do it right one or twice in a week.
Maybe somebody that understands the signal that the unit receives upon pressing the power button might be able to shed some light on this.... Again the button does seem to operate just not suspend when pressed normally (1 second or less)
I have done some more research and this seems to be a common problem for some with BAs but nobody has found out why. There must be some kind of common hardware fault.. Does the power button send only one signal or is it a multi signal device.
afbcamaro said:
I have the same problem, he is not talking about a full power down. If you hit the power button quickly the phone does nothing. However if you hold the power button down for about 2-3 seconds the lcd light turns off as it should.
Because of this I have to wait 1 minute for the unit to suspend before putting it back in the holster.
Does anybody have any idea as to why this might be happening. Im not new at this so hard reset, soft reset.. new rom... new radio...turning up side down while chanting. It does not change......
It will do it right one or twice in a week.
Maybe somebody that understands the signal that the unit receives upon pressing the power button might be able to shed some light on this.... Again the button does seem to operate just not suspend when pressed normally (1 second or less)
I have done some more research and this seems to be a common problem for some with BAs but nobody has found out why. There must be some kind of common hardware fault.. Does the power button send only one signal or is it a multi signal device.
Click to expand...
Click to collapse
Do you have a problem with turning on? First, we need to know whether it is hardware issue or not...
What you can do in the mean time with the turning off problem is by installing a poweroff app like shutdownme, psshutxp, etc etc...
Absolutely no problem with turning on from standby... Right now i just lock the phone before placing it back in the holster.
To make it clearer if you HOLD the power button down the backlight will turn off only. It will still show the display image and keys will still function (it dims)
Well, I had the same issue with the latest WM5 ROM. I thought I was too stupid to press the button, then I thought the button was broke, then I thought, I'll have to live with it.
Now that I have flashed to WM6, no problems at all! Never even came to my mind that this problem once existed. So I guess that some ROMs just have this particular bug?
Stefan
I have tried all the roms as well as 2003 and have the same issue in all of them. And im not alone.
Power off Problem
I'm in same condition.
Had the same problem when using WM2003 second Ed.
Now I've installed WM6 but nothing changed:
I cannot power-off/suspend but can turn off backlight if press and hold power button.
When in standby the button works fine to turn on the device.
Also, sometimes volume turns up continously with "noisy" beep ...
Anybody solved this problems?
Thanks,
Ruben
(WM 6 - 5.60.00 build 18125.0.4.2
radio 1.12.00 )
Power button has two modes:
1. Click mode: Click it once for a short duration. This turns off backlight and can be resumed by pressing it again or by pressing OK button
2. Press and Hold mode: Press and hold for few seconds and release. This mode will dim the backlight and no other button will bring it back. This is some kind of deep sleep in battery mode. To resume the original setting, press and hold Power button again for few more seconds.
(p.s.: I am not sure if this behavior is true for all the BA models)
April 1,
I know these modes...
It seems that "mode 1" doesn't work at all...
I would activate "Button Lock" (settings-->button--> Lock(tab)--> "lock all buttons except power button") to turn-off backlight and "lock all buttons except power button" but I cannnot...
You solved this problem?
I have had this issue of not being able to power off. One way I always got out of it was by clearing the registry hive. Unfortunately this brings the PDA back to the basic ROM. At this point the power button worked without any issues. Upon reloading the software the problem may come back. I believe the issue is related to some programs. I can't recall which program it was that seemed to cause the issue. One other thing I think that also worked was just entering the registry and getting back out and doing a hard reset.
I had the same problem with my 6600. the message button also didn't work. Believe it or not, to fix it. I banged the lower half (4-way area) on my desk a few times. Not hard enough to break the screen. But prolly hard enough to free what was prolly a sticky key. And now everything is working.
i am too
the same ...
when i press the power quickly , nothing happen
when i press the power for 2 sec. the backlight turns off
i tried every thing .... including formatting my BA
any one solve it ???
I have this same problem, my power button does`t work. i tried installing different roms but without any chance to fix it. maybe its an mechanic issue. i will change pwr button, i hope this work.
Look at one of my previous posts. I fixed it, twice, and other users have used the same metod to fix it. I think the problem is "hung bit" hardware related because you can also send it in for service, and they will change a chip, but i never had to.
I got a strange problem here.
Since I got my HTC Desire, I dont really use my G1 anymore. So I decided to sell it. While setting it up I noticed a really strange bug:
When I try to hold the Power button to get into the Power Menu, the phone changes in to standby-mode or changes to lookscreen (like i would only press the Power button without holding it).
Sometimes I can reach the Power Menu, but phone is changing to standby or lockscreen immediately.
I tried 2 different radios and 3 different roms
Does anyone have an idea?
Hi,
i have a htc touch hd with energy rom installed, i have read about the volume problem with this rom but i would like to make sure this is software related before i got any further, anyway heres my problem - as soon as i switch the phone on, everything loads then the volume up button presses itself constantly, causing the phone to constantly beep, if i then restart the phone, it vibrates 3 times and fails to come on, i have to remove the battery for a minute or so to get the phone back on then the same happens again.
so i installed the latest version of energy rom and it still happens except the volume control screen has been removed so now whenever im in a menu or drop box, it constantly changes the selected item to the option above (as if im physically pressing the volume up button).
is this software related or is the volume button physically broken.
the reason i ask before trying the patch is because the phone will need reflashin to be able to install the patch (because it will not work with the vol button stuck) and if i reflash with a stuck volume button it might crash and brick the phone. if its a hardware fault i am capable of fixing it myself.
Hi all,
since I upgraded to Android 4.3 (and still now with the 4.4), I'm experiencing a problem with the power button.
In particular, when the screen is off and I press the power button:
1) Sometimes it works
2) Sometimes the screen keeps off and I have to press again
3) Sometimes the screen powers on and immediately powers off... and I have to try again.
The same happens when the screen is on...
I had CM10.2 with Franco kernel and I thought it was a rom/kernel issue... but now I flashed the stock factory image of Kitkat and the problem is still there. Anyone with the same issue? I hope it is not an hardware issue...
Thank you.
giaomnitel1 said:
Hi all,
since I upgraded to Android 4.3 (and still now with the 4.4), I'm experiencing a problem with the power button.
In particular, when the screen is off and I press the power button:
1) Sometimes it works
2) Sometimes the screen keeps off and I have to press again
3) Sometimes the screen powers on and immediately powers off... and I have to try again.
The same happens when the screen is on...
I had CM10.2 with Franco kernel and I thought it was a rom/kernel issue... but now I flashed the stock factory image of Kitkat and the problem is still there. Anyone with the same issue? I hope it is not an hardware issue...
Thank you.
Click to expand...
Click to collapse
but it looks like a hardware issue!
Since i've been using viperOS i noticed that sometimes when i press the button to turn the screen on nothing happens, it seems to be random. The button is not the problem, i can turn the screen off without any problem, it only happens sometimes when i try to turn on the tablet screen. It also happens when i use the volume buttons to try to turn on the screen and the home button. Maybe its a RAM related problem?