Hey everyone,
Since rooting my Kindle (v 6.3), I was hoping I could be all fancy and have the Android Market - or Google Play if you will - but it seems my Fire doesn't agree with this. I've tried downloading and installing two separate versions of the Market - each launched but then came back with a force close error.
I've tried running the processes in KFU a few times but nothing seems to have changed.
Anyone have any ideas on how I would go abouts getting get working?
Thanks a lot in advance
BIGboy! said:
Hey everyone,
Since rooting my Kindle (v 6.3), I was hoping I could be all fancy and have the Android Market - or Google Play if you will - but it seems my Fire doesn't agree with this. I've tried downloading and installing two separate versions of the Market - each launched but then came back with a force close error.
I've tried running the processes in KFU a few times but nothing seems to have changed.
Anyone have any ideas on how I would go abouts getting get working?
Thanks a lot in advance
Click to expand...
Click to collapse
Same here... you're not alone.
In fact, I've been having all kinds of issues this morning. I've even tried flashing other roms to see if I can get Gapps there, but Hellfire didn't have Market. No idea why... I'm flashing the stock update.zip right now. I'm just going to wait this one out.
You can't just install the market apk... there's other things that are needed for it to work.. just Google gapps.zip and flash them in recovery... and Hellfire rom dose have market you have to follow thee directions in the OP
Sent from my HellfireKindle using Tapatalk 2
I had the same problem. This is how I fixed it.
Follow these instructions given by ndpete. Follow the first set of steps then use option 2.
Remember to give ndpete a thumbs up.
That works, or you can just root, mount rw, add the googleservicesframework and vending apk 's to /system/app, mount ro, and reboot. Then run market in go launcher and on the second or third run it will update to google play and you're set.
I too am having a seemingly impossible time getting Android Market (Play) to work. I'm kind of a newb so don't totally understand the directions in this thread.
KFU 0.9.5 was supposed to add the market, but it didn't in my case. In fact, it didn't put the Superuser utility on my Fire either, although all other steps seemed to work fine so I assume I am rooted.
Any help is appreciated.
Flash MoDaCo Gr8. Its the stock 6.3 ROM rooted and tweaked with GApps preloaded. I've been running it for a few days now and it works flawlessly. It still uses the Amazon launcher, and you can still do prime videos with OTA rootkeeper. Look in the dev thread.
Sent from my Kindle Fire using XDA
Thanks a lot to everyone
Fix
Going off of what other's said here:
Great big thanks to Vashypooh for helping me out on IRC, and a giant thanks (though I can't find the buttom for it) to ChodaBoyUSA's post on "6th April 2012, 05:49 PM".
Was trying to get Play on my wife's new Kindle and couldn't get it to recognise. Deleting the drivers and reinstalling (like ChodaBoyUSA states) was the trick. From there I still had some issues with installing the Gapps, and a good friend of mine (don't think he's on here) pointed me to this:
Unfortunately, I can't post URLs yet, so just google for this package.
"gapps-ics- 20120317-signed.zip"
Using the delete drivers trick, and this package worked. Up and running now.
Thanks so much, ndpete's solution totally worked! I'd give him and his posts a thumbs up if I could but I dunno how, so thanks!
Related
Ok so after succesful GB install every things going fine until this:
every time I install a new or already paid for ap (like re-installing old ap I paid for like TI.backup pro) after it says dl'd it goes to "installing" and then...reboot
every time. any one experience this or have any solutions?
Everything else works perfect: wi-fi , out/incoming calls, internet,3g, etc.
I can get into market np and I can DL, but the minute it goes to install....bam!
reboot.
I expierenced the same thing on a custom gingerbread rom. Thats because I messed some stuff up though. I would say just SBF it back to stock, and if you want to reinstall the gingerbread update then you can.
Also did you wipe your phone before you installed gingerbread?
Download and run Market Fix, reboot and everything should be sweet.
silverfang77 said:
Download and run Market Fix, reboot and everything should be sweet.
Click to expand...
Click to collapse
I was under the impression that the market fix only makes certain apps capable of showing up. Does it fix other things too?
silverfang77 said:
Download and run Market Fix, reboot and everything should be sweet.
Click to expand...
Click to collapse
not my issue also in the op thread I dont see how this is going to help me.
For me when it comes to modding phones DL something "just to see" seems like a good way to brick your phone, and not having enough knowledge to fix bricks I dont want to take a chance.
How will a factory reset affect me? I have never FR. Everything else is running perfectly, I cant believe there is no way to fix this, its has to be a missing file/permission?
anyone?
Edit may 4 2011: so.... I ended up sbf phone back to stock, rerooting and decided Ill wait for the real GB release. Not sure why this bizaare shizzle happened but better to play it safe. too many people with issues with this gb hack, to many peeps BL'd. I still think it was interesting I was able to load the bootstrap from my ap "mini task" yet it would not load from the ap screen itself.
Just read there is a new update for stock Nooks... basically gives more comic-reading options.
I currently have a rooted Nook color and don't really see any real reason to want the latest Nook update, but did want to ask: What would happen if i did update? Would I need to root again afterwards?
I know there's guides on previous versions of Nook, but was wondering if anyone had experience yet w/ the latest update.
I just downloaded it to look at it. It is a complete reflash of your ROM. So my guess is it will undo root. And this from B&N:
The NOOK Color Ver1.4.3 update contains new features and enhancements, including:
• Zoom view in comics and graphic novels
• 2-Page mode in landscape for viewing PagePerfect™ and PDF documents
• Other minor system enhancements
Sent from my Nook Color running ICS and Tapatalk
Thanks for the reply, very helpful!
Mine just automatically updated to 1.4.3. When I boot up it asks if I want to go to the normal home or the rooted home. I can go to the rooted home and my apps are there but I can't launch Google Play. Also, if I select the N button and then Home it just goes back to the default Nook home and I can't switch back to the rooted home. I have to restart the Nook to get back.
I'm going to try nooting it again to see if that corrects the issue.
thegraak said:
Mine just automatically updated to 1.4.3. When I boot up it asks if I want to go to the normal home or the rooted home. I can go to the rooted home and my apps are there but I can't launch Google Play. Also, if I select the N button and then Home it just goes back to the default Nook home and I can't switch back to the rooted home. I have to restart the Nook to get back.
I'm going to try nooting it again to see if that corrects the issue.
Click to expand...
Click to collapse
I'm in the same state. One of my two Nook Colors auto-updated to 1.4.3 and I'm having the exact same symptoms. The other hasn't yet updated and still works fine. Please share your results
Update:
I used clockworkmod 3.2.0.1 and manualnooter 5.02.19. I reinstalled manualnooter without wiping the Nook and I am back in business on both of them
"back in business on both of them"
Including the google app marketplace? Super cool - the market (and gapps in general) require some things to be in /system to hook into to handshake with the Google servers.
I threw together a super minimal "install su and busybox" rooting tool that lets all of my apps run as I prefer but doesn't include the Market. Nice to know I'll be able to get the Market back as soon as I like.
thegraak said:
Mine just automatically updated to 1.4.3. When I boot up it asks if I want to go to the normal home or the rooted home. I can go to the rooted home and my apps are there but I can't launch Google Play. Also, if I select the N button and then Home it just goes back to the default Nook home and I can't switch back to the rooted home. I have to restart the Nook to get back.
I'm going to try nooting it again to see if that corrects the issue.
Click to expand...
Click to collapse
This is why you're supposed to disable OTA updates when you Root a Device. Otherwise your device will update without your permission or foreknowledge. Usually it'll reset everything in System so you'll loose things like Root and Gapps.
Personally I just run CM9 off my 16gb class 10 SDcard. No OTAs to worry about and I get pure Android, all without modifying any of the Nook's Internal Memory.
roustabout said:
"back in business on both of them"
Including the google app marketplace? Super cool - the market (and gapps in general) require some things to be in /system to hook into to handshake with the Google servers.
I threw together a super minimal "install su and busybox" rooting tool that lets all of my apps run as I prefer but doesn't include the Market. Nice to know I'll be able to get the Market back as soon as I like.
Click to expand...
Click to collapse
Yup, everything works fine. I was able to install a new app after the update from the Play store
I've been out of the loop for awhile but need to restore my NC to stock to sell it. What's the easiest way to do it? I'm currently running an older version of ICS from cyanogen. Help?
eyecrispy said:
I've been out of the loop for awhile but need to restore my NC to stock to sell it. What's the easiest way to do it? I'm currently running an older version of ICS from cyanogen. Help?
Click to expand...
Click to collapse
Download the latest update from B&N, download the CWM 3.2.0.1 SD Card Image from here, create a CWM uSD Bootable using Win32 Image Writer, link here, load the downloaded Update file from B&N into the uSD, turn on/reboot NC, clear System, Data, Cache, install the update.
thewaywardgeek013 said:
Download the latest update from B&N, download the CWM 3.2.0.1 SD Card Image from here, create a CWM uSD Bootable using Win32 Image Writer, link here, load the downloaded Update file from B&N into the uSD, turn on/reboot NC, clear System, Data, Cache, install the update.
Click to expand...
Click to collapse
You forgot a very important part... follow the first portion of the Customize ROMs thread in my signature... B&N stock is not CWM flashable until the first edit in that thread is made.
DizzyDen said:
You forgot a very important part... follow the first portion of the Customize ROMs thread in my signature... B&N stock is not CWM flashable until the first edit in that thread is made.
Click to expand...
Click to collapse
Thanks for correcting me there, thought that it was possible already to install it thru CWM…
bigdweeb said:
Update:
I used clockworkmod 3.2.0.1 and manualnooter 5.02.19. I reinstalled manualnooter without wiping the Nook and I am back in business on both of them
Click to expand...
Click to collapse
I tried this and I cannot access the market. I had a stock unrooted 1.4.2 and then rooted using mn 5.02.19 on CWM 3.2.0.1
My device is rooted but the Market will not download apps. I have followed the guides to clearing the Vending.apk cache and Google Framework Services here: http://forum.xda-developers.com/showthread.php?t=1494901 but Market is not updating and I cannot install apps.
Even after flashing the two files here: http://bookclubs.barnesandnoble.com...tock/m-p/1356004/message-uid/1356004#U1356004 and then re-flashing MN 5.02.19 I just have root.
Currently I have the standard/stock build.prop. I can push files to /system/app and /data/app but that is getting old. And so far no combination of checking or unchecking the NookTools toolbox is letting me install apps via Market.
Any help would be greatly appreciated!
tigger2u said:
I tried this and I cannot access the market. I had a stock unrooted 1.4.2 and then rooted using mn 5.02.19 on CWM 3.2.0.1
My device is rooted but the Market will not download apps. I have followed the guides to clearing the Vending.apk cache and Google Framework Services here: http://forum.xda-developers.com/showthread.php?t=1494901 but Market is not updating and I cannot install apps.
Even after flashing the two files here: http://bookclubs.barnesandnoble.com...tock/m-p/1356004/message-uid/1356004#U1356004 and then re-flashing MN 5.02.19 I just have root.
Currently I have the standard/stock build.prop. I can push files to /system/app and /data/app but that is getting old. And so far no combination of checking or unchecking the NookTools toolbox is letting me install apps via Market.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
Under the "Let's get started:' section in the MN 5.2.19 OP thread, perform step #14, let Market update by waiting patiently for some time.
Check comment #216 in that thread from reebz which he resolved a problem like yours.
8GB 1.4.3 Nook Tablet Root?
So I am really new to this whole idea of rooting but I was wondering if anyone has found a reliable way to root the new (1.4.3) nook tablet? PLEASE!
Error message
DizzyDen said:
You forgot a very important part... follow the first portion of the Customize ROMs thread in my signature... B&N stock is not CWM flashable until the first edit in that thread is made.
Click to expand...
Click to collapse
I have downloaded the update twice from B&N and copied it to the sd card root. Keep getting a message when I try to install the update, using your instructions, that it can't open the archive (bad).
I am trying your method because I can't get the Nook to update normally. I even followed the default NookColor reset instructions then tried to install the update. The update would never even start. Currently sitting at 1.3.0. So I decided to try this CW mod route. More problems...
This update process is getting so frustrating...... I must assume at this point that the archive is bad again. Tried using both IE and Firefox (heard FF causes problems). The CW boot process worked fine so that's not it.
Not sure what more I can do.
Psyphurr said:
I have downloaded the update twice from B&N and copied it to the sd card root. Keep getting a message when I try to install the update, using your instructions, that it can't open the archive (bad).
I am trying your method because I can't get the Nook to update normally. I even followed the default NookColor reset instructions then tried to install the update. The update would never even start. Currently sitting at 1.3.0. So I decided to try this CW mod route. More problems...
This update process is getting so frustrating...... I must assume at this point that the archive is bad again. Tried using both IE and Firefox (heard FF causes problems). The CW boot process worked fine so that's not it.
Not sure what more I can do.
Click to expand...
Click to collapse
You can't edit the zip with archive software. You must entirely extract it, then edit the files, then rezip and re-sign the zip.
To save you the effort, I made a version of 1.4.3 that is CWM flashable and posted it. See my tips thread linked in my signature. See item A12.
I'm using CM10 internally. Do I need to update to firmware v1.43 or not needed anymore?
carlo.edmon said:
I'm using CM10 internally. Do I need to update to firmware v1.43 or not needed anymore?
Click to expand...
Click to collapse
Not needed.
I have just installed the most recent CyanogenMod 10 release (11/24/12 as of this writing) on my Nook Color. CM 10 itself works fine, but the most recent Google Apps package that I could find (10/11/12) won't install correctly. In clockwork recovery, I can install it and it says that it was installed fine, but when I actually boot into CM, there are no google apps.
I upgraded from CM 7 where there seemed to be a similar problem: You needed to install Google Apps with a specific version of CM and then upgrade to the newest version. Is something like that happening with CM 10? Is it something else? Is there a newer version of Google Apps that I missed?
All help is appreciated,
Sky
Skyology said:
I have just installed the most recent CyanogenMod 10 release (11/24/12 as of this writing) on my Nook Color. CM 10 itself works fine, but the most recent Google Apps package that I could find (10/11/12) won't install correctly. In clockwork recovery, I can install it and it says that it was installed fine, but when I actually boot into CM, there are no google apps.
I upgraded from CM 7 where there seemed to be a similar problem: You needed to install Google Apps with a specific version of CM and then upgrade to the newest version. Is something like that happening with CM 10? Is it something else? Is there a newer version of Google Apps that I missed?
All help is appreciated,
Sky
Click to expand...
Click to collapse
The version you have is right.
Sometimes the Google apps will not show unless you have logged into at least one of them. Look for talk or Gmail or play store or some other gapps and see if they show. If so, try to log in.
Sent from my Nook HD+ using Tapatalk
leapinlar said:
The version you have is right.
Sometimes the Google apps will not show unless you have logged into at least one of them. Look for talk or Gmail or play store or some other gapps and see if they show. If so, try to log in.
Sent from my Nook HD+ using Tapatalk
Click to expand...
Click to collapse
I don't have any of those apps. Should I try and find an apk for one of them online and then log into that?
Skyology said:
I don't have any of those apps. Should I try and find an apk for one of them online and then log into that?
Click to expand...
Click to collapse
Try Gmail.
I'm just going to mention this - are you connected to wifi? For me it's only the play store/market that shows up and then it's only when I'm connected to wifi.
Sent from my SGH-T999 using xda premium
leapinlar said:
Try Gmail.
Click to expand...
Click to collapse
Where can I find a download for this? I tried looking for an apk, but the one I found just automatically closed itself for some reason whenever I opened it. I also don't know how recent that version was.
k8108 said:
I'm just going to mention this - are you connected to wifi? For me it's only the play store/market that shows up and then it's only when I'm connected to wifi.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I am connected to wifi.
Also, I am going to bed right now. I will not be around ~12 hours (enjoying the extra sleep time the weekend provides :3). Sorry.
EDIT: Awake now. No more replies?
Skyology said:
Where can I find a download for this? I tried looking for an apk, but the one I found just automatically closed itself for some reason whenever I opened it. I also don't know how recent that version was.
I am connected to wifi.
Also, I am going to bed right now. I will not be around ~12 hours (enjoying the extra sleep time the weekend provides :3). Sorry.
EDIT: Awake now. No more replies?
Click to expand...
Click to collapse
When you updated from CM7, did you do a full wipe first?
leapinlar said:
When you updated from CM7, did you do a full wipe first?
Click to expand...
Click to collapse
I have this same problem and I did a full wipe and cleared the Dalvic. I have been reading all day. I think the problem may be the recovery. I have TWRP 2.3.1.0. I read it is best to downgrade to TWRP 2.2 but I don't know how to remove 2.3.1.0 and downgrade to 2.2. OAN: Paranoid Android is quite a nice rom and I use goomanager to simplify my downloads. If someone can tell me how to replace twrp with the other I am willing to test my theory. Thanks in advance.
hookedonnook said:
I have this same problem and I did a full wipe and cleared the Dalvic. I have been reading all day. I think the problem may be the recovery. I have TWRP 2.3.1.0. I read it is best to downgrade to TWRP 2.2 but I don't know how to remove 2.3.1.0 and downgrade to 2.2. OAN: Paranoid Android is quite a nice rom and I use goomanager to simplify my downloads. If someone can tell me how to replace twrp with the other I am willing to test my theory. Thanks in advance.
Click to expand...
Click to collapse
You can downgrade just by flashing the older version over the top of the newer one. If you can't find a 2.2 version to flash, you can get a 2.1 version here:
http://forum.xda-developers.com/showthread.php?p=21932561
Sent from my Nook HD+ using Tapatalk
Great, care to walk me through flashing the twrp 2.1.1 or twrp 2.2 over the newest one. I tried through terminal emulator and apparently I don't know what I'm doing. I tried to use twrp 2.3.1.0 to flash the aforementioned versions but it was not having it. Please point me in the right direction...it's my mother's NC, personally I use the NT which is a bit different to work with. Thanks 1001x
hookedonnook said:
Great, care to walk me through flashing the twrp 2.1.1 or twrp 2.2 over the newest one. I tried through terminal emulator and apparently I don't know what I'm doing. I tried to use twrp 2.3.1.0 to flash the aforementioned versions but it was not having it. Please point me in the right direction...it's my mother's NC, personally I use the NT which is a bit different to work with. Thanks 1001x
Click to expand...
Click to collapse
Well, you need to flash it with a recovery. And you said you tried TWRP 2.3.1.0. That should have worked. What do you mean, it was not having it? If it was failing to flash, maybe that was the problem you were having with that version. If that version is not working, you have no choice but to boot to a bootable recovery SD. I have CWM on a bootable SD on my tips threads linked in my signature. Go to item A10. You can use that to flash a different TWRP to your internal memory.
Sent from my Nook HD+ using Tapatalk
Thanks a million. No, TWRP 2.3.1.0 would not flash the older recovery. I willfollow your advice.
This is my FINAL VERSION of my Idiots Guide for the HP Touchpad. Now that a stable enough version of CM10 is available, I finally created a guide for you.
Here are links to the files you will need:
CM10 03/04/2012 Build
GAPPS 10/11/2012
ACMEInstaller3
Moboot 3.8
Anything else that you might need, you'll find on http://www.reverendkyle.com
Thanks for the video. It came just in time as I just purchased a used TP that had an older version of android ICS already on it and I wanted to upgrade but seeing as how this is the first device I have sort of inherited already rooted, it is hard to just jump in and know everything that I would have learned from the beginning like i did with my previous phones.
Anyways, I did everything you said except I used the newest AOKP rom. But my tp is still booting to the older version of android that I had on it. Any ideas? Feel free to pm me if you prefer that.
aujbman said:
Thanks for the video. It came just in time as I just purchased a used TP that had an older version of android ICS already on it and I wanted to upgrade but seeing as how this is the first device I have sort of inherited already rooted, it is hard to just jump in and know everything that I would have learned from the beginning like i did with my previous phones.
Anyways, I did everything you said except I used the newest AOKP rom. But my tp is still booting to the older version of android that I had on it. Any ideas? Feel free to pm me if you prefer that.
Click to expand...
Click to collapse
If the AOKP ROM is using a unique uImage file, then you may see two different entries on your moboot screen for two different Android builds.
What does your moboot menu have in it?
Maybe your install failed. Try downloading and flashing it again. If you're trying AOKP JB, you should wipe both /data and dalvik cache to avoid a boot loop!
If using AcmeInstaller3 remember to rename the ROM with ”update-” at the beginning so that it looks like update-AOKPJB_UnOfficial.zip
Sent from my SAMSUNG-SGH-T989 using xda premium
-SGA- said:
Maybe your install failed. Try downloading and flashing it again. If you're trying AOKP JB, you should wipe both /data and dalvik cache to avoid a boot loop!
If using AcmeInstaller3 remember to rename the ROM with ”update-” at the beginning so that it looks like update-AOKPJB_UnOfficial.zip
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
I believe it was the "update-" thing that was keeping it from updating. I followed another video tutorial which provided files that had the "update" in front of them and it worked.
I haven't tried yet but now that it worked will the regular method of wiping and flashing through recovery work? (Like, if I want to try out different JB Roms) Are there any files that need to be in a particular place for the recovery method to work? I tried that method first and it would never take, would always revert back to the original version. Don't know if, because I just jumped in and haven't been here from the beginning, I am just missing a necessary step that is hardly even talked about anymore.
Love your work Rev! Thank you again for everything that you do!
Update went like clockwork, unfortunately I can't seem to get the camera to work (not a terrible loss, but I was sorta excited to see it actually working with this release).
Jubmasterflex said:
Love your work Rev! Thank you again for everything that you do!
Update went like clockwork, unfortunately I can't seem to get the camera to work (not a terrible loss, but I was sorta excited to see it actually working with this release).
Click to expand...
Click to collapse
I can attest to the improved battery life on this cm10 build. Amazingly, it holds battery life when it's sleeping now.
Thank you so much for taking the time in making the video for us. Your instructions are easy to follow, hard for anyone to mess up.
(The hosting site for the files is not working, not sure if you were aware)
Hi, I have CM9 running on my TP. With the latest release, the camera works great. But before updating it to CM10, I'd like to know about the issues currently in this build.
Thanks.
Where does one go when the goo.im site appears down, to get the needed files? Mirror somewhere?
ljderm said:
Where does one go when the goo.im site appears down, to get the needed files? Mirror somewhere?
Click to expand...
Click to collapse
Don't go for external mirrors unless some recognized developer suggests them. Best will be to wait for goo.im to come up again, being a prime site, it won't be down for long.
The goo servers do appear to go down on occasion. They always come back up a bit later.
Problem with installing GAPPS using ACMEInstaller3
Excellent tutorial for an idiot like me. Thanks for again for the guide! Question:
I followed the instructions step by step and was able to get CM10 installed successfully. However, I wasn't able to get GAPPS installed using this method. From researching I understand sometimes there is a problem installing GAPPS through ACMEInstaller3 and one can simply get GAPPS installed through CWM Recovery. However, I would like to use/have TWRP instead so is there a way to get GAPPS installed properly through ACMEInstaller3 and then I can install TWRP through GooManager?
Alternatively, is there a way to install GAPPS without using CWM Recovery?
Or, I guess I can install CWM Recovery first, then install TWRP Recovery, then remove CWM Recovery while keeping TWRP and not go back to the stock Recovery? I tried to search the forums and wasn't able to find instructions on removing CWM Recovery WHILE still keeping CM10 and not go back to the Stock recovery.
Any help would be much appreciated. Thanks in advance for your help.
@reverendkjr - appreciate your videos. they're awesome. definitely helped me (and several other friends) many times and saved a ton of time. super easy to follow.
Yes you can install TWRP normally, flash gapps in CWM then install goomanager app, open and click the 3 dot menu and install custom recovery script then it will install it
Now using a root file manager go to the directory called boot and delete uimage.cwm.img (this is from memory but still should be correct
Sent from my cm_tenderloin using XDA Premium HD app
waynekirby said:
Yes you can install TWRP normally, flash gapps in CWM then install goomanager app, open and click the 3 dot menu and install custom recovery script then it will install it
Now using a root file manager go to the directory called boot and delete uimage.cwm.img (this is from memory but still should be correct
Sent from my cm_tenderloin using XDA Premium HD app
Click to expand...
Click to collapse
Dumb question. I had dual boot installed with moboot and one day my dumbarse clicked erase SD card.well it did...EVERYTHING accept twrp. I successfully reinstalled webos and installed preware. Its actually pretty cool.its like a fledgling play store for webos. Now....where should i go from here.i no longer think twrp is on it. All i have is webos with preware.sorry if this is newbie
Sent from my Galaxy Nexus using xda premium
Crwolv said:
Dumb question. I had dual boot installed with moboot and one day my dumbarse clicked erase SD card.well it did...EVERYTHING accept twrp. I successfully reinstalled webos and installed preware. Its actually pretty cool.its like a fledgling play store for webos. Now....where should i go from here.i no longer think twrp is on it. All i have is webos with preware.sorry if this is newbie
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
My goodness you have forgotten everything, you will need to install acmeuninstaller 3, moboot, CMW and the rom you want along with the relevant gapps. Sounds complicated this thread will make it easy
http://forum.xda-developers.com/showthread.php?t=2147284 and has all the necessary links. Have fun.
Sent from my Transformer Prime TF201 using Tapatalk 2
Heck ya i did lol. That refreshed my memory instead of a long video. Thank yo very much
Awesome!
Sent from my cm_tenderloin using xda app-developers app
Great vid!! Finally got CM10 on my Touchpad.
Hi all, hope I have posted this in the right place
Tried to root my Nexus 7 2012 using this guide
teknovenus .com/wordpress/speed-up-nexus-7-f2fs-slimkat/
(Wouldnt let me post link, it's a guide to rooting slimkat using NRT)
After all seemed to go well, when I fired up the tablet I got asked for a password to unencrypt the tablet. I googled the problem and its seems to be fairly common.
The problem I have now is I can't get anything to work. I tried to flash a Pac man ROM after wiping everything off the tablet (using teamwin recovery), but it just loops. I left it for some time.
I am pretty inexperienced at this stuff, so just looking to see if anyone knows how I can get the thing going again? I have no data backed up, I just want a snappy Rom that will allow me to use the kindle app, play books and a few basic games for the kids.
Any help would be appreciated.