need help to flash rom (htc explorer) - Android Software Development

hi
my htc explorer hang on only htc logo.try to reset hard reset but no luck.
i have to decide to flash with originol rom.but iam new.how to flash it?
where i can get originol rom?
please guide me.

Related

Athena Advantage X7500 dead after AthenaUnlock.

Hello, I need some help from local guru`s please.
I tried to unlock X7500 with AthenaUnlocker by Olipro, from sticky.
In step2 (unlock radio) i had an communication error, probably I didnt cheked my battery, and the procces stopped in the middlle.
Now I got black screen, cannot sync with activesync, phone not start-up(((( at all.
Tryed hardreset, try to repeat the proccess in boot-mode, but no succes.
Unfortunatly I cant flash new Rom, cause this one is uniqe from operator with hebrew build-in. There is some other solution I can try? Maybe some repair tool?
Pls, any help will be useful. Tnx in advance!
br
Try to take out you memory card and sim card.then go to booloader mode a try to flash official ROM.
Yeah, i guess i can repair phone by flashing rom, but i asking if there is solution without flashing? Cause there is no oficcial rom by cellcom_il.. (((
Thanx anyway.
PS. sir, can u pls give me link where i can find oficcial roms? tnx
I used the wrong bootloader upgrade tool the first time and had the same problem - only the bootloader would come up and I thought I had bricked it. I had to re-flash with the stock ROM (available here: http://www.htcamerica.net/support/advantage7501/software-downloads.html ). Then used the bootloader upgrader ( http://forum.xda-developers.com/showthread.php?t=316846 ). Then you can upgrade the radio to 1.57.

rom flashing problem

I recently flashed my hd with maryone cooked rom,but when i try to flash with other rom,it dosent flash my hd.RUU(with .nbh file) says image version 1.59 to flash with '1.00 blackstone' . after hitting update my hd shows same maryone rom.i dont know what happens with my hd?.
i need a urgent help,please experts tell how to get a rid of this problem?.
First off, did you follow <<THIS>> guide.
But the device in bootloader (soft reset and hold vol. down) and try it again.
or
You can flash via SD Method <<HERE>>.
mangesh hotkar said:
I recently flashed my hd with maryone cooked rom,but when i try to flash with other rom,it dosent flash my hd.RUU(with .nbh file) says image version 1.59 to flash with '1.00 blackstone' . after hitting update my hd shows same maryone rom.i dont know what happens with my hd?.
i need a urgent help,please experts tell how to get a rid of this problem?.
Click to expand...
Click to collapse
with hard-spl u can flash any wwe rom anytime u like... but my question to u is did u get an error message at anytime u were adding the new rom

help my hero

hi guys.
at first i should say:excuse-me for my bad English
1:i root my hero successfully
2:i flash the froyo2.2 rom version 1.2.1 successfully
i install an app and then i restart my hero
and now problem is starting...my hero cant boot itself
i hard-reset it/but this way cant help my hero to boot itself/
what should i do now with my hero?
plz help.
Flash a different (or newer version) of a custom rom. Sounds like something went wrong.
in this situation can i flash another rom?
anybody suggest any way?whit flashing new rom it will be done?
Yeah, what BTDAG said.
Turn it off,... Turn back on into recovery (HOLD HOME + POWER) then flash a new ROM.
It may have been that your download corrupted, you could just try downloading the same ROM again or try another.
Worry not,...
tnx bro...
i fix my hero with ur help

[Q] help please!!!!!

can someone help me please I was messing with my phone trying to install andriod on it. I have installed VBNDroid-Reloaded2Alt-24634-Oct13 on the phone it works fine put i would like to go back to the original win 6.5 but i can't I have even tried a hard reset it won't work. I hope someone can help.........
Flash a stock rom. The same way you did VBN.
Thanks it worked..

BLOCKED STAGE Can't flash any rom...

blocked hd2, here what happened, i had artemis v17 and wanted to go back to the official htc rom but flashing wasn't completely succesful, basically now i have in my hd2 some part of the official rom and some part of the artemis but it's not working at all, i can't succesfully flash no one of the two roms and no roms at all
active sync isn't working so i can only operate by sd card i tried and searched a lot but no solution yet...hope of a good advice....
solai said:
blocked hd2, here what happened, i had artemis v17 and wanted to go back to the official htc rom but flashing wasn't completely succesful, basically now i have in my hd2 some part of the official rom and some part of the artemis but it's not working at all, i can't succesfully flash no one of the two roms and no roms at all
active sync isn't working so i can only operate by sd card i tried and searched a lot but no solution yet...hope of a good advice....
Click to expand...
Click to collapse
Extract the rom to get the nbh file. Rename that nbh to LEOIMG.nbh. Copy it to your SDcard, and flash in bootload mode.
NOTE: You will have to reflash HSPL if you want to flash any custom rom at a later stage and this can only be done from computer!
yes i tried it but the flashing of the original htc stops because there is part of the artemis that prevents from flashing orginal roms in the phone
aaaaaaaaaahhhhhh i can t buy new phone how can i solve it i've been trying for days!!!!
and i can't connect the hd2 to the pc since there's no working rom in it.
solai said:
and i can't connect the hd2 to the pc since there's no working rom in it.
Click to expand...
Click to collapse
Get the hd2 toolkit.
shanman-2 said:
Get the hd2 toolkit.
Click to expand...
Click to collapse
but shanman tell me, with this kit do i need active sync working?
i have no working rom in my hd2 so i guess i somehow have to restore the hd2 to factory settings and factory rom without having to use activesync, or anyway flash any rom and then be able to flash win 6.5!
I REALLY DON'T WANT TO BURY MY HD2 IT'S STILL GREAAAAAAT, please i'm searching all over but cant find a solution so far
if you can enter bootloader you should be able to flash via USB if PC drivers are correct & no Hardware issue present on HD2.

Categories

Resources