HDPI CM9 - Huawei Ideos X5 U8800

Does anyone know the best CM9 nightly with hdpi to port? Because i would like to port cm9 with a linux guide, because it's a aosp rom.
Sent from my SGH-T989 using xda premium

alex1301 said:
Does anyone know the best CM9 nightly with hdpi to port? Because i would like to port cm9 with a linux guide, because it's a aosp rom.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Yes, i was hoping for that too... I've tried porting one I found in xda, over Aurora, but it always crashed after booting, so I gave up... any help would be nice
Sent from my U8800

From which device are you porting?
Sent from my SGH-T989 using xda premium

alex1301 said:
From which device are you porting?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I don't even remember :S I gave up... I'm a noob in porting roms, I read somewhere it was a matter of replacing a few folders and stuff... Can you post a link to a good tutorial?

I am only on my touchpad, so i haven't all of my bookmarks. But do you know a hdpi device?
Sent from my SGH-T989 using xda premium

alex1301 said:
I am only on my touchpad, so i haven't all of my bookmarks. But do you know a hdpi device?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
http://www.motorolatriumphhacks.com/
Here's one for a 480x800 device...

Thx i will have a look at it.
Sent from my SGH-T989 using xda premium

There's one here also, seems more recent:
http://knowmydroid.com/blog/download-alpha-build-of-cm9-for-galaxy-w

Do you know if there is a official supported hdpi nightly?
Sent from my SGH-T989 using xda premium

For u8800? No, I think there isn't one... I know someone on the forum was trying to port CM9 but never heard again about it...

fjsferreira said:
For u8800? No, I think there isn't one... I know someone on the forum was trying to port CM9 but never heard again about it...
Click to expand...
Click to collapse
You mean this?
http://forum.xda-developers.com/showthread.php?t=1386995
Sent from my u8800-aurora-ICS using tapa 2-5

everything we port is typically from the desire z. it is really similar to our phone.
http://forum.xda-developers.com/showthread.php?t=1492461
cm9 port.
---------- Post added at 07:19 AM ---------- Previous post was at 07:16 AM ----------
Geno also has something on his sourceforge, who knows what it is though.
http://sourceforge.net/projects/genoandroid/files/

no, i only need a hdpi device to port from

I still am, but I am porting from source. Give me 1 month.
Sent from my U8800 using Tapatalk 2 Beta-5

alex1301 said:
no, i only need a hdpi device to port from
Click to expand...
Click to collapse
desire z is hdpi...

I will do a new port from desire z, because desire z has the same libs as the x5. But i need the mkbootimg for the x5 and someone who can sign the zip then
Sent from my SGH-T989 using xda premium

i have only one problem. the guide says the Easiest way to replace the kernel is to take a kernel update zip for your device, un-zip it and rename the zImage file to "boot.img-kernel" and copy and replace the file of the same name in your directory.
but when i take the boot.img-kernel from the unpacked aurora boot.img, it has 2,6 mb, but when i rename the packed boot.img from aurora to boot.img-kernel it has 3.0 mb. which one should i take?

Im trying to port CM9 too, don't forget that u8800 hasn't the same system space as the desire z (friendly advice)
Im gonna post it as soon as i finish it..
FYI: mine is booting okay, i have other problems though.. trying to fix them..

yes, i know, but which file should i take?

I dont understand your problem, you decompile the boot.img change the .rc and then want to compile it? (and don't know what boot.img to use)?

Related

Latest ICS for Defy not working on Bravo

http://forum.xda-developers.com/showthread.php?p=20056083#post20056083
It's sad I think it's because it runs on 2.3.4+ kernel version. The older one was 2.2. What can we do?
Why can't we change our kernel
Sent from my MB520 using XDA App
Motorola locked it. We can't unlock it without there signiture.
Sent from my MB520 using XDA App
What we need is that developer who is working with it now, to create a rom without the new kernel, I think walter79 is working them, I'll asking him.
If I'm not mistaken the green lense defy still has to use the froyo kernel
Sent from my MB520 using XDA App
marquae11 said:
If I'm not mistaken the green lense defy still has to use the froyo kernel
Sent from my MB520 using XDA App
Click to expand...
Click to collapse
walter79 told that we need to compile ICS with froyo kernel, but how can we do that?
He sent this: https://github.com/Quarx2k
in the ics thread there is something how to do it!!
Compiling ics is ridicolous amount of ram needed. 20gigs I think... bravomotorola... check your pm
Sent from my GT-I9100 using xda premium
Since we really have no true devs we are going to have to look for one with knowledge of code. We may have to donate some money to someone to get them a bravo unless there's someone with an extra that is willing to let someone use it. That's our true problem is that the defy, Atrix, galaxy s, and other phones have support from cm and alot of experienced devs that have been developing since the magic and hero days.
Sent from my MB520 using XDA App
I pmed motobravo to try and copy over ONLY. App and framework folder FROM the new release over the OLD release.... I no longer have bravo but a thrill and a sgs2... as you can tell by sig so can't try it out.... but got a pm about this
Sent from my GT-I9100 using xda premium
How's the sgs2 going? I'm thinking about n buying one MisStep
Sent from my MB520 using XDA App
marquae11 said:
How's the sgs2 going? I'm thinking about n buying one MisStep
Sent from my MB520 using XDA App
Click to expand...
Click to collapse
It is blazing fast... if you get one... get the new skyrocket... I have the regular one.... replying from my ported rom of superosr gb .
Sent from my GT-I9100 using xda premium
I'm sure they have an ics port working on galaxy s 2 lol
Sent from my MB520 using XDA App
rdannar said:
I pmed motobravo to try and copy over ONLY. App and framework folder FROM the new release over the OLD release.... I no longer have bravo but a thrill and a sgs2... as you can tell by sig so can't try it out.... but got a pm about this
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
rdannar is with us
Hey there.
Are you gonna help us with something about ICS?
Well I think we need first a fully working 2.3, then we can go to the next step.
Thanks everything
Bravomoti will post his results.. gave him some tips
Sent from my GT-I9100 using xda premium
rdannar said:
Bravomoti will post his results.. gave him some tips
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes, the results from the excellent tip: Well first I moved over the framework and apps like rdanner said, and it worked! Then I moved over the ect folder for working gps and better working wifi and such, and it also worked and booted! It runs pretty well, but the only problem is 3D (egl libs) don't work with the 2.2 kernel (this is a guess kind of, I'm guessing it needs the 2.3 kernel). Any time I move over newer libs from the newer build I get stuck at the moto screen. I still suggest people to try it out though, I don't have the signal working yet I don't think unless it already works...maybe try playing with the baseband switcher. The build is pretty smooth and wifi and orientation both work good...
Try it here
ICS gapps here
After install wipe data/factory reset and cache and dalvic cache maybe... I would boot it up first and do gapps after it's booted. Have fun, and thanks again rdanner!
You cannot usually mix gb libs with froyo libs..
Sent from my GT-I9100 using xda premium
rdannar said:
You cannot usually mix gb libs with froyo libs..
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
So there is no way to get the gingerbread kernel on the Bravo?
The kernel... probably not... you need a factory gb kernel source Wich the bravo does not have...
Sent from my GT-I9100 using xda premium
rdannar said:
The kernel... probably not... you need a factory gb kernel source Wich the bravo does not have...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Is that why you get that bootloader error when trying to flash it?
EDIT:
LOL!! I quote Epsylon's thread under to do list:
2.2 kernels :
Fix Google maps, no errors but no layer drawed (working only with defy+ kernel and gl libs)
Fix 3D (galery, opengl etc...) working with only defy+ kernel and gl libs
Click to expand...
Click to collapse
Looks like he might get 3D working for our 2.2 kernels!!
BravoMotorola said:
Is that why you get that bootloader error when trying to flash it?
EDIT:
LOL!! I quote Epsylon's thread under to do list:
Looks like he might get 3D working for our 2.2 kernels!!
Click to expand...
Click to collapse
Lets hope he gets it!!
I really i'd like that we get the same defy owners are getting!

[ROM] AtiCM

New thread:
http://forum.xda-developers.com/showthread.php?t=1424472
Good, but you posted the thread in the wrong section
_Sparks said:
Good, but you posted the thread in the wrong section
Click to expand...
Click to collapse
Yes, i know. But I can't post in development thread.
use which version of nAa kernel?
anyway,whats odex n non odex? i been wondering for quite some time now
Sent from my E15i using xda premium
maliceomalice said:
use which version of nAa kernel?
anyway,whats odex n non odex? i been wondering for quite some time now
Sent from my E15i using xda premium
Click to expand...
Click to collapse
It's work with 7 and 6 too.
The unodex apps are slowlier because it have to extract the dex files to dalvik-cache, but if you modify anything in the framework in odex version, the apps may stop. So who change theme many times, they have to use unodex version.
I hope you understand it, It's hard for me, in english.
Ok,let's try and will report a bug
Sent from my E15i using XDA App
it dont work when i try using nAa v07. it shows until the cm7 bootanimation,then in stuck at the middle while led flash red. i havent tried with nAa v06..maybe later
Sent from my E15i using xda premium
I use it with nAa7 and it's working.
Did you do full wipe?
Sent from my E15i using XDA App

Help with boot.img

I am trying to port an aosp 3.0 boot.img from the desire z and I need some help as this is my first kernel port?
Sent from my Mytouch 4g using xda premium
...Awesome... has already ported it. It's on his Dev-Host. It has the same problems as the kernels we haven now.
invasion2 said:
...Awesome... has already ported it. It's on his Dev-Host. It has the same problems as the kernels we haven now.
Click to expand...
Click to collapse
Thanks I didn't know that.
Sent from my HTC Mytouch 4g using xda premium
I searched dev host and couldn't find the kernel.
Sent from my HTC Mytouch 4g using xda premium
Please post the boot.img if you can port it cnote I did not see it in awesome's dev host. I would love to try this guy out.
mrmytouch said:
Please post the boot.img if you can port it cnote I did not see it in awesome's dev host. I would love to try this guy out.
Click to expand...
Click to collapse
I couldn't get it to boot up
Sent from my myTouch 4g using xda premium
cnote74 said:
I couldn't get it to boot up
Sent from my myTouch 4g using xda premium
Click to expand...
Click to collapse
Can you post it anyways? Did you port it or is it awesome's? Did you try this with ics or jelly bean? Or was this boot.img from the jelly bean port posted?
mrmytouch said:
Can you post it anyways? Did you port it or is it awesome's? Did you try this with ics or jelly bean? Or was this boot.img from the jelly bean port posted?
Click to expand...
Click to collapse
It was from a desire z rom I tried it on lcecoldsandwich and my paranoidandroid port.
Sent from my myTouch 4g using xda premium
cnote74 said:
It was from a desire z rom I tried it on lcecoldsandwich and my paranoidandroid port.
Sent from my myTouch 4g using xda premium
Click to expand...
Click to collapse
Wait so you tried porting the kernel or just tried using it on your roms...? I don't get what you're trying to do. From what I understand you are trying to port their kernel through boot.img? I dont think you can do that as idk if there's a way to decompile a zImage.
invasion2 said:
...Awesome... has already ported it. It's on his Dev-Host. It has the same problems as the kernels we haven now.
Click to expand...
Click to collapse
And what did Awesome already port...? The desire z kernel...? As far as I know the source has yet to be released for it (unless awesome did some convincing) and as I stated before; idk if kernels can be ported like that... I thought the adjustments made to them had to be from source... Hence, why devs like nexx, elginsk8r, and others who worked (are working) on a 3.0 kernel are doing so from source.
It's impossible to decompile zimage
Sent from my HTC Glacier using xda app-developers app
I was trying to port the boot.img I changed a couple of things in ram disc but it wouldn't boot up.
Sent from my myTouch 4g using xda premium
cnote74 said:
I was trying to port the boot.img I changed a couple of things in ram disc but it wouldn't boot up.
Sent from my myTouch 4g using xda premium
Click to expand...
Click to collapse
Found it. It does not want to boot for me either on paranoid. Thanks for trying :good:

CustoNexus ROM testbuilds thread

Hi there,
A friend of mine asked me to compile my custom rom from source CustoNexus for his Arc, he isn't rooted yet, so he's quite careful with it haha.
Since i've built it anyways, I was thinking about releasing it in the forums, but I don't have an Arc to test on.
Before i release this into the wild development section, i'd like to ask to test you guys if you want to test THIS ROM on your arc/arc S and tell me how its like.
CustoNexus is a ROM based on CM&PA sources with our own custom overlay such as custom apps, ringtones, a kernel built with linaro, our own setup wizard and many more to come.
I built it with the 'anzu' device tree from FXP.
RESULTS:
Arc: untested yet
Arc S: untested yet
Thanks in advance,
djpbx.
PS. you're flashing this on your own risk, blah blah blah you know the deal with experimental roms.
Bump
Sent from my Desire S using xda app-developers app
djpbx said:
Bump
Sent from my Desire S using xda app-developers app
Click to expand...
Click to collapse
thanks that bump was really usefull. Joke . Testing Now... Even if i have to mod my framework with my crappy not-syncing vm...
Ics base or jb?
justkiddinghere said:
Ics base or jb?
Click to expand...
Click to collapse
Jelly bean
Sent from my Desire S using xda app-developers app
any results yet?
My net was gone i wasn't able to download will do it later so
Downloading it now, will flash it and see what happens. Kernel is included in the zip I guess, right?
Babis_ECE said:
Downloading it now, will flash it and see what happens. Kernel is included in the zip I guess, right?
Click to expand...
Click to collapse
Yep
any screenshot?
Raschild6 said:
any screenshot?
Click to expand...
Click to collapse
Just plain jelly bean for now. It's a testbuild
Sent from my Desire S using xda app-developers app
Tried to install it, symlink errors..
Babis_ECE said:
Tried to install it, symlink errors..
Click to expand...
Click to collapse
I'll do a new build tomorrow then .
Sent from my Desire S using xda app-developers app

Firefox OS

http://forum.xda-developers.com/showthread.php?p=36789743
compatible devices
Anyone want to try porting this?, we're on their list.
Sent from my Nexus 10 using xda app-developers app
blmvxer said:
http://forum.xda-developers.com/showthread.php?p=36789743
compatible devices
Anyone want to try porting this?, we're on their list.
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
Well the os is meant for lower end devices so I'm sure the shift would have no trouble running it.
Sent from my EVO using xda app-developers app
If anyone wants to try evervolv has ICS branch on their device tree for our device, I've never tried to compile against though. Also I finally found the device tree I *think* deck was using in our ICS builds since they aren't on his github...
https://github.com/ThePlayground/android_device_htc_speedy
BigSplit said:
If anyone wants to try evervolv has ICS branch on their device tree for our device, I've never tried to compile against though. Also I finally found the device tree I *think* deck was using in our ICS builds since they aren't on his github...
https://github.com/ThePlayground/android_device_htc_speedy
Click to expand...
Click to collapse
Is there a jellybean branch on his github / on yours (from when you modified it)?
EDIT: Nvm, found it on his but I doubt it has the changes you made
Sent from my PG06100
Firefox is ICS based...that's what their site says
Sent from my PG06100 using xda app-developers app
BigSplit said:
Firefox is ICS based...that's what their site says
Sent from my PG06100 using xda app-developers app
Click to expand...
Click to collapse
Really? On the porting page all it said was make sure you have your devices branch
I also wanted the JB branch for something else I wanna try...if you have a local copy could you push it to your github? I would really appreciate it
Sent from my PG06100
Check my cm threadfor a link to my github
Sent from my PG06100 using xda app-developers app
Yeah I did, but the closest thing to CM10 I see is the liquidsmooth JB branch on there...or is that it?
Oh yeah forgot about that. I really didn't make much mods to the device tree, I made all my edits to the CM packages themselves. My device tree is probably no different then Decks, we both just used Evervolvs base and made the 2-3 edits necessary to get it to compile CM
---------- Post added at 03:11 AM ---------- Previous post was at 02:53 AM ----------
I was wrong about Firefox being ICS based, it says your devices must have at the minimum ICS 4.0.4
Bump
Sent from my Nexus 10 using xda app-developers app

Categories

Resources