New Nook... Help? - Nook Color Q&A, Help & Troubleshooting

OK, so I got a new Nook Color, and threw the CWR on a flash drive and Formatted System, Formatted Data, Cleared Dalvik, grabbed Mirage Kang 7.2, and installed it.
Data seems to be having some access issues (won't format), and I don't think the install took right, because nothing but FCs on boot and all the apps (i.e. SuperUser) are missing.
Seems like on my last Nook (2 years ago) I had the same problem and IOM/Cubed gave me a hand fixing the mess I made
I feel like I missed a step here... Any thoughts? Is there a specific root install I'm supposed to do prior to installing Kang?

Update...
I figured this one out.
The problem was that once you install CWR to the EMMC, you have to pull the SD Card, run CWR FROM THERE (post reboot, of course), and format data. For whatever reason, the SD Card CWR image doesn't have access to data (or tries to delete data from the SD Card instead?).
After formatting data (and it actually working), bob's your uncle.

majorpay said:
I figured this one out.
The problem was that once you install CWR to the EMMC, you have to pull the SD Card, run CWR FROM THERE (post reboot, of course), and format data. For whatever reason, the SD Card CWR image doesn't have access to data (or tries to delete data from the SD Card instead?).
After formatting data (and it actually working), bob's your uncle.
Click to expand...
Click to collapse
'Cuz you probably have the old version of it.

votinh said:
'Cuz you probably have the old version of it.
Click to expand...
Click to collapse
Probably true... We need to get some stickies updated with links to actual modern methods for modding the device. After testing out the latest Kang 7.2, I'd say this device hasn't seen it's day yet.

Related

SD Card changed format, lost all my apps, can't reinstall. Help!

So I just traded my iPhone for a rooted MyTouch. It has the Cyanogen mod I believe. Well all of a sudden I could not access my SD card and when I tried to open it on my computer it said 'Wrong Format'. Wouldn't work on the phone either. So I formated Fat32 and thought I could start over.
It still shows my apps installed in the Marketplace, although they were on the SD and deleted. I can't uninstall them, but it thinks they are there, somewhere. Has anyone had this problem? I am relatively new to Android and rooting. I had a jailbroken iPhone before. Thanks!
kinda depends really. I would suggest first going thru recovery console if you are using amon recovery and partition sd card there. With most modified roms you have apps 2 sd so there are actually 3 partions. The biggest is fat32 for data like music, then ext2,3,4 for applications then a linux swap partition to help expand the ram on the phone and if you formated on PC or from settings on phone those partitions are gone. So I would do that first and then try to uninstall from market and reinstall again if not you may need to wipe and restart the device.
How do I get into recovery mode? I tried going to the terminal and using the flash_image recovery /sdcard/imgfile but it says I do not have permission?
Any ideas??
If your phone has been rooted right by the previous owner, you can access the recovery mode by first powering down, then pressing home and power at the same time.
Ahh! That worked! thanks!
I have a variation on this problem and lost my apps and Market, hope someone can help. Started with the SD card coming unmounted randomly, known issue with EVO I guess. Followed the recommendation of reformatting the SD by plugging it into a Windows PC and doing a FAT32 format. I backed up everything I could "see" from SD to C: drive. I am running a custom ROM with APPS2SD feature and Clockworkmod recovery. I'm very new to Linix and Android but, it looks like there is a Linix Ext3 partition that is made by APPS2SD on the SD card and that is where all my apps where, including android Market app. So, upon copying all the folders back to the re-formatted SD I had no apps and no android Market to able to re-download all my apps. I guess Market is like a licensed deal that you can't just get a .apk of and reload it. I do HAVE a current recovery backup that was on the FAT32 directory of the SD card but it appears the the Ext3 partition is not in that recovery file. I tried booting into recovery with Clockworkmod and reformatting the SD again, I tried a "Restore ext3.img" but Clockworkmod comes back with 'sd-ext.img not found" so I am guessing that the Linix Ext3 partition backup was stored IN the Ext3 partition of the SD(?) and the system and data stuff is stored in the FAT32 recovery file. Brilliant idea (not)! I tried a re-flash of the ROM, flashes OK but no apps. Anyway, the SD is properly partitioned now, the FAT32 stuff is back on, I don't know how to look in to the Est3 partition but, I know there is one program there cause I installed a file explorer by downloading and executing an .apk and there was an option to install it to SD. Going to factory reset and starting over again is not an option. Any ideas please?
SOLVED this issue:
apperantly the android market application is called "vendor.apk" and can be downloaded from various sites BUT WAIT, it's not that simple. Apperantly the vendor app has to be specific to your phone (hardware)? On a whim, I downoaded the previous version of my custom ROM (happedned to be Fresh ROM) .zip, I extracted the vendor.apk from the .zip and installed that. Then, I had an apk called MarketUpdater.apk, or something like that, that had installed in the phones system/app from the last Fresh ROM update. I ran this to update the vendor (android market) to the latest version, then I ran that. Did it work? NO, it crashed hen I tied to run market. I then did a re-boot. Did it it work? NO Upon attempting to reboot it got stuck in a loop and froze. Very scary. So, remove the battery and try again. I think I had to remove and re-install the SDcard somewhere in there to get it to a first time boot and, after a re-boot, whalla, come back with a working market. Market remembered all the apps that I purchased and I re-downloaded everything. Of course, I don't know for sure where they are stored right now (SD card or phone??)
And, my original problem of SD card constantly coming unmounted has been fixed.

[Q] CM7 SD Boot - Can you expand EXT4

I've had a lot of success creating a bootable CM7 using the size agnostic preparation instructions. (Here) I want to keep the Nook at stock, for a variety of reasons. Anyway, I created a very nice installation on a 16gb uSD card and did a lot of work setting up LP+ and my hundred-odd android apps. (I also have an Evo 4G). I was fortunate enough to get a 32gb uSD at a great price and want to move my installation over to that. The most successful by making an image with the Win32DriveImage and flashing that back to the 32gb uSD card, which leaves a large area of un-partitioned space. I've tried a couple downloaded tools but have been unsuccessful. Is there a command I can use in Terminal Emulator to to do that? I know I can use the agnostic procedure to start from scratch, but I'd really hate to do that.
The only thing that would make starting over is if someone can point me to instructions that would allow me to have an installation that boots from uSD and has fully functional CWR and Rom Manager. I love how it works on my EVO to download and install updates with a couple clicks. (Everything I've tried there seems to mess with the core Nook).
Thanks a lot!
Rob
Use Minitool Partition Wizard, or another windows partition manager to expand the last storage partition.
LBN1 said:
Use Minitool Partition Wizard, or another windows partition manager to expand the last storage partition.
Click to expand...
Click to collapse
Thanks for the suggestion. I tried a few partition managers and run into the same problem including with MiniTool. It will start the process of expanding or copying and expanding in one step, but it will eventually say "file system error" just before it finishes. It suggests repairing the file system, but none of the tools can do this with the ext4 partition. Still trying though. Gonna give the Acronis partition manager a whirl.
bitbearmi said:
Is there a command I can use in Terminal Emulator to to do that? I know I can use the agnostic procedure to start from scratch, but I'd really hate to do that.
Click to expand...
Click to collapse
You can edit partitions with fdisk from the terminal emulator. I suggest googling, it's a pretty old school tool and isn't very friendly. You should easily be able to resize your "sd" partition with that. Actually more accurately you should be able to delete that last partition and then create a bigger one in it's place. won't keep your data, but you can just copy it over to your computer and resize, then copy back.
Another option would be gparted which comes with basically every live linux cd ever. That one can actually do true resizes and should handle ext4 partitions easily (it is a linux file system after all)
bitbearmi said:
The only thing that would make starting over is if someone can point me to instructions that would allow me to have an installation that boots from uSD and has fully functional CWR and Rom Manager. I love how it works on my EVO to download and install updates with a couple clicks. (Everything I've tried there seems to mess with the core Nook).
Click to expand...
Click to collapse
You don't need to start over. Get a new uboot.bin for your cards boot partition from here.
Then get the clockwordmod kernel and ramdisk from the zip at the end of this post. Put the uImage and uRamdisk on the sd card as uAltImg and uAltRam.
Now when you choose sd:alternate from the boot menu it will boot you into clockwork.
Thank you so much. I think that will do the trick.
..rob
ylixir said:
You don't need to start over. Get a new uboot.bin for your cards boot partition from here.
Then get the clockwordmod kernel and ramdisk from the zip at the end of this post. Put the uImage and uRamdisk on the sd card as uAltImg and uAltRam.
Now when you choose sd:alternate from the boot menu it will boot you into clockwork.
Click to expand...
Click to collapse
OK. All is well and the dual-boot solution is super-convenient. But I'm a little perplexed as to how to work with CWM in this environment. Ideally I'd like this to work just as it does on my EVO, Rom Manager lets me know there is a new version, I select it, it downloads asks if an want Gapps and backup (yes please) then it does its thing. Maybe that is way too much to ask. If so, then the main things I need to know are how to instal an updated build that I download separately? Do I just copy it to the root of the boot partition.
Sorry for being such a n00b with the nook. Its funny but I'm much more confident messing with my phone, which if bricked, is pretty catastrophic. (LOL)
The instructions for updating CM7 for the agnostic build is in the OP's post for that build.
"How to update to a new build:
put the new build you want to try on the first partition. (the name must be update-cm-*.zip or cm_encore_full*.zip or just update-*.zip)
Boot from the SDcard in the recovery mode (see above) and the new snapshot would be installed.
The partition layout would be preserved, filesystems are NOT reformatted, so your data should be safe."
Also, Easeus Partition Manager is supposed to be able to resize partitions w/o destroying data. YMMV, of course. I used it to extend ext 4 but prior to putting anything there.
Didn't have any luck with easus either, but ended up using a gparted boot which worked great. Normally I would use recovery nandroid to backup the rom before installing the updated, but when I did that by booting into alternate, I ended up backing up the nook rom to the root partition, so I think the safest thing to do is to use win32diskmanager to image the entire sd card.
ylixir said:
You don't need to start over. Get a new uboot.bin for your cards boot partition from here.
Then get the clockwordmod kernel and ramdisk from the zip at the end of this post. Put the uImage and uRamdisk on the sd card as uAltImg and uAltRam.
Now when you choose sd:alternate from the boot menu it will boot you into clockwork.
Click to expand...
Click to collapse
So, just to make absolutely sure, if I already have CM7 installed on an SD card, which I've been using as a daily driver, installing apps, downloading Kindle books, PDFs, and the like, but I want to put CWMR onto the SD card, the steps you outlined should be OK?
NOTE: I know, I know, if I'm confused I probably shouldn't be screwing around with things...But the size-agnostic SD CM7 method was so bloodless that I thought the other stuff would be pretty easy to do. For whatever reason, adding stuff like the OC kernel and CWMR has been a little confusing.

Sigh... Formatted My SD Card With Backups

I was having problems with Taboonay 2.2, so I decided to wipe everything and try LightSpeed. First, I backed up all my apps with Titanium and moved the backups onto my external sd. Then, I did a full backup in CWM, just to be safe. Then I did a system wipe and formatted /system, /data and... /sdcard.
Yes, I got a little trigger happy there. Momentarily forgot that /sdcard is not the same in CWM as on the Acer roms (i.e. it's the external memory in CWM vs the internal in the rom).
After cursing myself loudly, I realized that a format that takes 2 seconds to do must not be a full format. I.e. The FAT table is gone along with file and directory information, but the files themselves should still be there.
As I'm a linux user, I installed TestDisk and was able to fully recover all my files. Moral of the story: Don't be dumb and format your backups, but if you do, don't panic. Just don't write anything else to the disk/card and you'll be able to recover your data.
fasteddy86 said:
I was having problems with Taboonay 2.2, so I decided to wipe everything and try LightSpeed. First, I backed up all my apps with Titanium and moved the backups onto my external sd. Then, I did a full backup in CWM, just to be safe. Then I did a system wipe and formatted /system, /data and... /sdcard.
Yes, I got a little trigger happy there. Momentarily forgot that /sdcard is not the same in CWM as on the Acer roms (i.e. it's the external memory in CWM vs the internal in the rom).
After cursing myself loudly, I realized that a format that takes 2 seconds to do must not be a full format. I.e. The FAT table is gone along with file and directory information, but the files themselves should still be there.
As I'm a linux user, I installed TestDisk and was able to fully recover all my files. Moral of the story: Don't be dumb and format your backups, but if you do, don't panic. Just don't write anything else to the disk/card and you'll be able to recover your data.
Click to expand...
Click to collapse
Once I was installing rom on my phone (in the early days) so I put the zip file on the sd card, wiped everything, and to make sure I was getting a completely clean install, formatted the sd card. Of course, this meant that I had also removed all of my CWM backups and the ROM I was going to flash! Duh...
This is why you transfer your CWM & Ti backups to your PC for safe keeping, you will never have this problem again.
fasteddy86 said:
I was having problems with Taboonay 2.2, so I decided to wipe everything and try LightSpeed. First, I backed up all my apps with Titanium and moved the backups onto my external sd. Then, I did a full backup in CWM, just to be safe. Then I did a system wipe and formatted /system, /data and... /sdcard.
Yes, I got a little trigger happy there. Momentarily forgot that /sdcard is not the same in CWM as on the Acer roms (i.e. it's the external memory in CWM vs the internal in the rom).
After cursing myself loudly, I realized that a format that takes 2 seconds to do must not be a full format. I.e. The FAT table is gone along with file and directory information, but the files themselves should still be there.
As I'm a linux user, I installed TestDisk and was able to fully recover all my files. Moral of the story: Don't be dumb and format your backups, but if you do, don't panic. Just don't write anything else to the disk/card and you'll be able to recover your data.
Click to expand...
Click to collapse
STOP! You haven't overwritten your sdcard yet, have you? Put it in a usb card reader, connect it to your PC and download Recuva. It will scan and restore deleted files (even after a format). It works very will with sdcards.
Euclid's Brother said:
STOP! You haven't overwritten your sdcard yet, have you? Put it in a usb card reader, connect it to your PC and download Recuva. It will scan and restore deleted files (even after a format). It works very will with sdcards.
Click to expand...
Click to collapse
That is what he did, just read the post.
Lol.. guess i got a little trigger happy too and didn't read the whole thing. Glad he was able to recover
Recuva can't even see my sd card now. It is just grayed out now. Guess it is time for a new one now. Glad you got your fixed.

[Q] Update your TRIPLE-BOOT SD Card for nook color

First of all a big THANKS! I successfully installed the triple boot SD Card. I see there is an update with a new zip file. As a newby I want to make sure I understand correctly: I will burn the zip img to a clean SD Card, install it, power up, and basically follow the steps previously including flashing the gapps, etc. I can then copy anything I have in the old SD Card 7th partition to the new 7th partition. Is that correct? I am asking to make sure I don't just copy something into the existing partitions on the existing SD Card.
When I updated racks triple boot, i did not reinstall Gapps. Just reloaded everything from my Titanium bu and there it all was.
Thanks
Thanks, that is a good idea. May I ask, did you use your existing SD Card and put the zip on the 7th partition and use a blank formatted SD Card. I just wonder if the zip will create new partitions or simply overwrite the existing files in the existing partitions.
Hikerpack said:
Thanks, that is a good idea. May I ask, did you use your existing SD Card and put the zip on the 7th partition and use a blank formatted SD Card. I just wonder if the zip will create new partitions or simply overwrite the existing files in the existing partitions.
Click to expand...
Click to collapse
You don't need a blank formatted card. The zip overwrites files in the existing partitions on your current SD but doesn't create new ones. Nothing on the 7th partition (the SD partition) is affected, nor are your downloaded market apps in the /data partitions. Personally, I have created a folder in the emmc for all the flashable zips. The CWM recovery allows you to install the zips from the internal sd (emmc) instead of the sd sd (7th partition). That way, I can flash zips to a backup or test sd, and flash to my working sd if everthing's OK.
Thanks again
Thanks once again. Those are good ideas and I will use them also. I may have been over-thinking the update but this is all new to me. Thanks again.
Can I add my inquisition to this thread as well? It is exactly what I was wondering....
I have spent a few up and running using the Triple Boot directions found here. Everything has been rock solid.
Now I'm interested in upgrading. Just wanted to make sure I understood this correctly:
1. Since the image I flashed is dated 3/4/12. then does it have all of the changes up to then already baked in? If not....
2. I don't need to do incremental updates, correct? I can just flash the newest images, right?
3. Since the primary (and I believe secondary as well) ROMs have been changed, I need to "boot into the CWM that is included with the dualbootSD and go to "mounts and storage" and choose to format "/system1" "/data1". Remember to also wipe cache."
4. I will need to reinstall all of the following?: gapp and the calendar-email-tts fix even if installing the latest release
Thanks so much. Loving what I've been able to do so far...but just had too many questions to proceed forward with any degree of confidence.
Thanks!
Triple Boot Upgrade
"1. Since the image I flashed is dated 3/4/12. then does it have all of the changes up to then already baked in? If not....
2. I don't need to do incremental updates, correct? I can just flash the newest images, right?
3. Since the primary (and I believe secondary as well) ROMs have been changed, I need to "boot into the CWM that is included with the dualbootSD and go to "mounts and storage" and choose to format "/system1" "/data1". Remember to also wipe cache."
4. I will need to reinstall all of the following?: gapp and the calendar-email-tts fix even if installing the latest release"
Although a newby I think I can help as I went through the same process. Of course this applies only to Racks triple boot option and how I have done it.
1) What he is doing is upgrading the complete zip file with the most current files so it is complete as in the first install. You could actually install it following the original install instructions.
2) Correct
3) No, it will overwrite any existing files in the partitions with the new, upgraded files.
4) If you have used Titanium to back up your apps and data(which I recommend) - Titanium is one of the apps Racks includes - then no. Once you boot up, etc and have everything running you can run Titanium to restore your apps and data.
Remember that if you update only from the zip you will only have those apps and data that were included originally. Your SDCard partition will remain unchanged so if you have apps/data on that partition then those will simply have to be reloaded/restored.
Hope this helps.
Great...had to give you a "Thanks".
I figured he was updating the original install to include newest upgraded files. Maybe the DualBoot image is not 100% updated? (The image I just installed was dated 3/4, but there are updates dated 3/6 and 3/26). Not sure if I should update those or not.
The file I installed was Mirage_CM7_ICS_CM9_DualbootSD.img.zip dated 3/4/12. I have not yet installed any updated.
Thanks for the additional info. I actually didn't have anything of consequence up to this point as I just decided to do a fresh install on a new 8GB Sandisk card with slightly better random write speeds than the old 4GB card. No data of consequence will be lost, but I will look into Titanium for the future upgrades.
Thanks!
Nice. Did the updates, but had to reinstall gapps. Will try titanium next time. Loving being able to mess around with ICS. Will have to play around as I get more time.
One last question....I only downloaded and updated the mirage CM7 and Encore CM9 files.
I did not update and encore MIUI files, as, if I understand this correctly, this will take the place of my current mirage CM7 boot image...so I will have this brand new interface.
With the Triple boot, you get a flavor of ICS, but you need to choose whether you waint either "CM7 mirage" or "MIUI". And if I choose MIUI...I need to decide whether I want ICS or GB. Is that about right?
Thanks.
Thanks!

Can't write to internal EMMC

Hi,
I have a nook that I rooted and put a custom rom on back about a year and a half ago. I flashed the ROM to the internal EMMC and CWM 3.2.0.1 was flashed as recovery. If it makes any difference it was a CM9 ROM
Now here's where I'm at. I can run ROMs off the sd-card but they are not stable at all. I get a whole bunch of force closes and such.
When I try and flash a new ROM to the internal EMMC it says it completes, but nothing changes. It is still the previous ROM. When I try and format the /data and /system partitions with the EMMC recovery, it doesn't complete. It says there is an error. When I format with TWRP off an sd card, it says it completes but once again, the rom is not wiped.
I've tried the 8 reboot error method, and it never gets to the stock recovery screen. It keeps booting to the EMMC ROM.
I've tried repartioning the EMMC with leapinlar's zip files. It says it successfully completes, but once again nothing changes.
Ideally I'd like to get the emmc back to stock and try and run a rom off the sdcard.
I've read the threads that I thought were applicable to my issues, but nothing seemed to work. I'm completely out of ideas. Anyone have similar issues or can provide some guidance?
Thanks.
The problem you are having running a ROM from SD is the brand and speed of SD you are using. It needs to be SanDisk class 4.
The reason the 8 failed boot does not work is you replaced the stock recovery with CWM. It needs the stock recovery to be able to complete. See my NC tips thread linked in my signature and read item A12. Assuming you can get it to flash, I have a stock recovery zip there.
I don't understand why the ROMs are not flashing. You say it gives errors when you try to wipe with CWM. What do the errors say? You used the internal CWM and TWRP on SD, but none worked. Try my bootable CWM SD to see if that helps.
I don't understand why my partition zips did not work. I know the newest TWRP will not flash them without giving an error 2 message. Try my bootable CWM SD.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
Thanks for the advice...
I've been using a Patriot class 10 micro sd to run the roms/attempt to flash new roms. Its worked fine before, but I'll try and pickup another one from someplace.
When I try and format /system and /data from the emmc CWM it says "Error formatting /system" or "error formatting /data" after working away for about 5 minutes
Here's what i did:
Created CWM 6.0.1.2 Bootable SD
- Flashed NookColor-emmc-stockrecovery.zip
- Message said successfull.
- tried to restart and old CWM recovery 3.2.0.1 was still installed
Booted into CWM 6.0.1.2 Bootable SD Recovery
- mounted /system and /data
- attempted to format
- Message "Done." for both
- attempted to flash stock 1.4.3 that you have modified for CWM
- install from sdcard complete
- reboot
- Old CynanogenMod bootscreen and old rom still installed.
Using same CWM 6.0.1.2 Bootable Sd Recovery
-flashed NookColor-emmc-repair-partitions-1-4-5-6-7-8.zip and NookColor-emmc-format-partitions-5-6-7.zip
-said success
-attempted to flash stock 1.4.3
- nothing changed. Old rom still installed
One more thing I noticed:
Everytime I login to the currently flashed rom, any changes I make are never saved. For example, if i install an apk or uninstall an app, the next time i can successfully boot into the emmc ROM, those changes are reversed to the previous version. Could it be that the current rom is being stored somewhere and being reflashed when it tries to bootup?
I hate to say this, but it sounds like your internal embedded card has become read only. I have had this happen to SDs but not to emmc. The apps act like they are writing and if you leave the folder and come back, they are not there. It is like they are writing to a ramdisk instead of your SD. You might try booting to a ROM on SD and see if you can write to any of the internal partitions like /cache or /rom and see if they stick. If not, you may only be able to run off SD and maybe not even then. You might have to change your dalvik cache setting on SD so it uses /data instead of /cache.
Sent from my Galaxy Tab running Tapatalk
I tried copying a file to the emmc partition from twrp and it didn't persist after reboot... so it looks like the emmc is set to read only. I don't supposed I can change that using adb and/or software solutions right? It's a hardware issue?
Any guidance on how to change davlik cache to use /data instead of /cache? I'll be happy to get any sort of stable rom running off any SD card.
I was hoping to repurpose the nook as in in car tablet to tether a data connection to my phone and play music and such.
Thanks for your help. I appreciate you taking the time.
canjoe said:
I tried copying a file to the emmc partition from twrp and it didn't persist after reboot... so it looks like the emmc is set to read only. I don't supposed I can change that using adb and/or software solutions right? It's a hardware issue?
Any guidance on how to change davlik cache to use /data instead of /cache? I'll be happy to get any sort of stable rom running off any SD card.
I was hoping to repurpose the nook as in in car tablet to tether a data connection to my phone and play music and such.
Thanks for your help. I appreciate you taking the time.
Click to expand...
Click to collapse
I don't know of anything that can revive it. I never could revive my SD that that happened to.
To make your ROM on SD use /data for all of the dalvik cache, create a file in /data named local.prop. In that file put this line:
dalvik.vm.dexopt-data-only=1
Next time it boots the system file portion of dalvik cache will be on /data along with the installed app portion.
Sent from my stock Nook HD+ using XDA Premium
I now have a stable version of CM 7.2 running off the SD card. I put the davlik cache on the data partition and everything seems to be running pretty smooth.
I'll keep messing around seeing if there is anything to revive the internal emmc, but at least I can use the nook off the SD card again.
Thanks for helping me troubleshoot and figure this out. Cheers.

Categories

Resources