I am writing to see if I can get some help, I have tried to install CM9 nightly on my vibrant and I get an error before it installs. My phone has been setup for use on both TMobile and AT&T could that the reason? It seems to be a verifaction problem.
Have you tried to install cm7 then try cm9??
Sent from my SGH-T959 using xda premium
I have not tried that. I was coming from ICS Passion and did a data;system;cache wipe then factory reset. I will try to install CM7 doing another wipe and then try again. Thank you for your reply.
If I remember I think it is a kernal related thing but not sure I'm at work so I can't really look
Sent from my SGH-T959 using xda premium
I recommend Odin to jfd. Here what I did.
First make sure you back up your files and make sure you remove sim card and memory card too
1.Odin to JFD
2.Dail *2767*3855# (to format it because there still old file there)
3.Install GB bootloader
4.Install Update.zip (that have CWR with the update)
5.In recovery Perform a factory reset, wipe data/cache,clean cache partition
,wipe dalvic cache and format system( in Advance setting)
6.Flash CM9 ( you might have to flash twice)
7.Perform a factory reset,wipe date/cache
8.Install Gapp
9.Reboot
I dont have to flash CM7 first. I just flash straight to CM9 but I do recommend intsall GB bootloader
Well since I don't use Windows I will try this with Heimdall. It seems strange that I can install ICS Passion but not CM9. I also tried installing CM7 nightly with a clean wipe but had no luck there. I was looking for a kernel image to flash but it was late and the site was not responding for the kernel image I was trying to download. The plus is this is my old phone I use around the house like a mini tablet since it's only hooked up to the wifi.
I have been successful in flashing CM9 nightly. What I did was download glitch V14-B6 flashed that rebooted into recovery then flashed CM9 nightly
Now I have it running I would like to thank everyone who replied.
Sent from my MB860 using xda premium
Related
There are a few users having problems flashing the recent CM7 nightlies. Here is my scenario.
I'm running CM7.0.2 from EMMC. Last night I tried to flash N63. Downloaded the zip from here...http://mirror.teamdouche.net/?device=encore (where I always get them from). Rebooted to recovery, wiped cache and dalvik and installed the zip. Clicked reboot & got stuck at "ANDROID_". I did a hard reboot (holding down power). Booted back to recovery and did a full wipe (system, data, cache, and dalvik)...Installed the zip again, rebooted and same results. I tried re-downloading the mirror and I've tried installing it with my recovery sd. Everything yields the same results......"ANDROID_".
I can reboot to recovery, and load my nandroids (7.0.0, 7.0.2, Nookiecomb, and Phiremod), however I cannot get one of the new nightlies to flash. I have seen other people are having similar issues so I've started this thread in the hopes of resolving this. I have been working on this problem and searching XDA / Google and still no luck.
hockeyfamily737 said:
There are a few users having problems flashing the recent CM7 nightlies. Here is my scenario.
I'm running CM7.0.2 from EMMC. Last night I tried to flash N63. Downloaded the zip from here...http://mirror.teamdouche.net/?device=encore (where I always get them from). Rebooted to recovery, wiped cache and dalvik and installed the zip. Clicked reboot & got stuck at "ANDROID_". I did a hard reboot (holding down power). Booted back to recovery and did a full wipe (system, data, cache, and dalvik)...Installed the zip again, rebooted and same results. I tried re-downloading the mirror and I've tried installing it with my recovery sd. Everything yields the same results......"ANDROID_".
I can reboot to recovery, and load my nandroids (7.0.0, 7.0.2, Nookiecomb, and Phiremod), however I cannot get one of the new nightlies to flash. I have seen other people are having similar issues so I've started this thread in the hopes of resolving this. I have been working on this problem and searching XDA / Google and still no luck.
Click to expand...
Click to collapse
Ok, not a very experienced dev or anything that here. And I have not experienced this problem myself, but a few ideas to throw out:
- Are you trying to install an OC kernel after nightly, or not b4 getting stuck?
- Maybe restore 7.0.x reboot, make sure it comes back. Back into recovery, flash nightly with just a cache wipe, see if it comes up.
Ronin3178 said:
Ok, not a very experienced dev or anything that here. And I have not experienced this problem myself, but a few ideas to throw out:
- Are you trying to install an OC kernel after nightly, or not b4 getting stuck?
- Maybe restore 7.0.x reboot, make sure it comes back. Back into recovery, flash nightly with just a cache wipe, see if it comes up.
Click to expand...
Click to collapse
No OC kernel....Just trying to get the nightly to run before worrying about that. I can nanadroid back to any of my former roms with no problem. I'm going to try just doing a ONLY a cache wipe and load it again......just as soon as I run out of patience with my black "ANDROID_" screen of frustration, I'm currently looking at for the last 7 minutes.
Ronin3178 said:
Ok, not a very experienced dev or anything that here. And I have not experienced this problem myself, but a few ideas to throw out:
- Are you trying to install an OC kernel after nightly, or not b4 getting stuck?
- Maybe restore 7.0.x reboot, make sure it comes back. Back into recovery, flash nightly with just a cache wipe, see if it comes up.
Click to expand...
Click to collapse
Yeah........It's a no go. Nand back to 7.0.2, reboot to recovery, wipe cache only, instal zip for Nightly 63......."ANDROID_".....DAMMIT!!!!
I'm back to 7.0.2 again until someone has something else I can try.
Are you using cwm recovery 3.0.2.8?
Could be an issue if not.
Sent from my NookColor using Tapatalk
ansleyj44 said:
Are you using cwm recovery 3.0.2.8?
Could be an issue if not.
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Interesting... I'm using 3.0.1. I'll try updating it tonight.
sent from my Ginger-Hero CDMA
ansleyj44 said:
Are you using cwm recovery 3.0.2.8?
Could be an issue if not.
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Good call!!! I flashed Clockwork 3.0.2.8 and all is good. Flashed nightly 63 with no problems. Thanks!
sent from my Ginger-Hero CDMA
Just another quick note.....To anyone having problems overclocking the new nightly builds. You need to use the ext. 4 overclock kernel, which can be downloaded here......http://forum.xda-developers.com/showthread.php?t=925451&page=239
hockeyfamily737 said:
Good call!!! I flashed Clockwork 3.0.2.8 and all is good. Flashed nightly 63 with no problems. Thanks!
sent from my Ginger-Hero CDMA
Click to expand...
Click to collapse
Nevermind.
janko10 said:
Is there a way to update CWM without burning a new image to SD card? I currently have 3.0.1.0 as well and I don't want to wipe my rom or SD card just to update to 3.0.2.8 but I can't seem to find any other way to do that.
Sorry but this is my first Andriod device so bit of a noob here.
Click to expand...
Click to collapse
I was going to say ROM Manager, but forgot it doesn't have 3.0.2.8 for Nook.
Here is the recovery zip file, flash from CWR. http://db.tt/gDlb5mw
- download to your SD card for Nook, boot into CWR, choose install zip from SD/choose zip, flash, reboot recovery
So I had ICS Stunner installed on my note, but decided I wanted to go back to MIDNOTE 3.3 so I opened CWM and did the normal wipe then went to install the MIDNOTE 3.3 zip package.
However CWM recovery just stopped on 'installing update' (I left it for a good hour its well and truely frozen).
And now if I try and reboot the phone I just get stuck on the first boot screen, so my plan is to using Odin flash back a stock ROM then reroot and then fash MIDNOTE 3.3 again, should this work ok?
Yep. It will work. Flash stock repack first. Everything should go fine after
Sent from GNOTE - The Indisputable Beast of Android World
No!!!
here's what you should do:
download abyss kernel 3.9(not 4.2) and place it in sd . Install the kernel in cwm ~>reboot recovery ~> wipe data factory reset ~>wipe cache and dav cache~> install any custom rom at cwm
Sent from my GT-N7000 using XDA
kelvin fong said:
No!!!
here's what you should do:
download abyss kernel 3.9(not 4.2) and place it in sd . Install the kernel in cwm ~>reboot recovery ~> wipe data factory reset ~>wipe cache and dav cache~> install any custom rom at cwm
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
well I went ahead last night and reflashed the stock rom then did everything again, and now happly back on ICS, but will keep this in mind for next time will save me doing all that
Flash abyss kernel before backing up the rom also
Sent from my GT-N7000 using XDA
Thread Closed​
As this has been solved, thread closed​
Hi,
I have installed the latest build (15/7-2012) of locera's UNOFFICIAL CM9 build - and it went fine.
http://forum.xda-developers.com/showthread.php?t=1542911
Im using CWM-Recovery 5.5.0.4 that locera also created
But after i tried to shutdown the tablet, i just keeps showing Samsung splash/CM9 Splash and then reboots.
I have tried to clear the cache, but it does not help.
Anybody got any ideas?
Just flash ics stock rom with Odin and make data factory reset (this will remove all things in device if you have any important files move to extsd)
Then flash cwm recovery and flash any custom rom you want
Good luck
Sent from my GT-P6800 using xda app-developers app
Going from CM9 to official ICS I was also getting a bootloop. To get official ICS to work, I had to flash official ICS with Odin, then reboot in stock recovery and make a full reset. I think that going to or coming from CM9 creates a problem with stock rom. Even with stock HC rom it wasnt working anymore.
acc_kareemomar said:
Just flash ics stock rom with Odin and make data factory reset (this will remove all things in device if you have any important files move to extsd)
Then flash cwm recovery and flash any custom rom you want
Good luck
Sent from my GT-P6800 using xda app-developers app
Click to expand...
Click to collapse
You can try a wipe data, then wipe cache and wipe dalvik. (wipe data will remove all you apps and system setting, but your files should remain intact). If still bootlooping, (restore you backup thru CWM if you have one), reflash CM9 via CWM after doing what previously mentioned.
If that doesn't work, do what acc_kareemomar suggests.
Hello,
I currently have defy with the later lens with the latest Quarx CM10 nightly installed. While CM10 is generally awesome, it turns out to be not stable enough (radio crashing, sudden restarts) and a bit too slow. Now I would like to downgrade to CM7.2.
I tried just flashing CM7.2 after a wipe which yielded a non booting device and me flashing back CM10.
Does anyone have any experience with reverting the Defy to CM7.2?
Thanks for your help!
You should change ext4 format of data to ext3 before flashing cm7.
1. Boot to recovery
2. Wipe Delvic cache, data/cache
3. Go to tools menu in recovery.
4. Convert file system from ext4 to ext3. It don't show any progress. Wait for few time. It shows done.
5. Flash cm7
IMPORTANT don't attempt another wiping of data/cache after filesystem conversion.
Sent from my MB525 using Tapatalk 2
pradeeppk said:
You should change ext4 format of data to ext3 before flashing cm7.
1. Boot to recovery
2. Wipe Delvic cache, data/cache
3. Go to tools menu in recovery.
4. Convert file system from ext4 to ext3. It don't show any progress. Wait for few time. It shows done.
5. Flash cm7
IMPORTANT don't attempt another wiping of data/cache after filesystem conversion.
Sent from my MB525 using Tapatalk 2
Click to expand...
Click to collapse
I want to do the same with my green lenses. I have CM10-2nd boot, should I install CM7.2 for defy+ or just regular defy?
thanks in advance.
I don't know WHY all this redundant question? Is so hard to search a little? This problem was debated by enough time.
Sorry, I did search and found just this thread...
Just tried here, and cm7.2 for Defy+ worked just fine.
Hmmmm, last time I had to do this I reflashed a stock Froyo rom and did the whole process of rooting/installing 2ndinit/installing CWM again. Installing CM7 then wiping dalvik/cache/data did not work.
If a simple flash/wipe doesn't do the job, reflash Froyo again and follow the instructions to install CM7.
I haven't got the option in Tools to format in EXT3, there's only options to share SD, drivers, systems... Why?
I'm using a Quarx CM10-20120924-NIGHTLY-mb525.
Maybe I need to upgrade to CM10.1 to have that option? Which ROM could be good?
I'm using a Defy (mb525)
Miguemiguemigue said:
I haven't got the option in Tools to format in EXT3, there's only options to share SD, drivers, systems... Why?
I'm using a Quarx CM10-20120924-NIGHTLY-mb525.
Maybe I need to upgrade to CM10.1 to have that option? Which ROM could be good?
I'm using a Defy (mb525)
Click to expand...
Click to collapse
Just wipe from STOCK recovery .. it will format partitions to EXT3 and CM7 should boot =)
yzeroy said:
Just wipe from STOCK recovery .. it will format partitions to EXT3 and CM7 should boot =)
Click to expand...
Click to collapse
Wipe from STOCK recovery and then go to Custom recovery and flash directly the rom?
Miguemiguemigue said:
Wipe from STOCK recovery and then go to Custom recovery and flash directly the rom?
Click to expand...
Click to collapse
No just install CM7, GAPPS, and reboot to Stock recovery and there do Factory reset and reboot.
Now your CM7 should boot
Similar, but a little different
My requirement is to give CM 10.x one more try, this time with a clean install.
So, what should I do?
I posted here: http://forum.xda-developers.com/showthread.php?t=2192807
Do I need to use stock recovery, format, install SBF and then install the latest nightly?
Or something else as well?
s_u_n said:
My requirement is to give CM 10.x one more try, this time with a clean install.
So, what should I do?
I posted here: http://forum.xda-developers.com/showthread.php?t=2192807
Do I need to use stock recovery, format, install SBF and then install the latest nightly?
Or something else as well?
Click to expand...
Click to collapse
Any thoughts?
CM 10.1 to stock
I have gathered the following instructions so far:
1. Boot to recovery
2. Wipe Dalvic cache, data/cache
3. Go to tools menu in recovery.
4. Convert file system from ext4 to ext3.
5. Flash stock ROM (Where can I find this?)
Once I am with stock ROM, I would like to install CM 10.1 again, since I am not happy with the performance of the current CM 10.1 (perhaps 2 months old), so I would like to start from scratch.
Am I missing anything important?
Once you wipe data, system and cache in TWRP(of your current installation), your new installation is clean(as it would after stock rom/sbf flash)
You can cross check using the inbuilt file explorer in TWRP
Sent from my MB526 using Tapatalk 2
S3 I9300
Pacman rom's. Nightly
Latest CWM touch
Problem I'm having is every time I try to flash the nightly update, it says update complete then when I reboot the phone goes into a bootloop and have to restore from backup.
Using CWM I have tried installing zip from SD card as well as from the external SD card.
I have wiped cache & dalvik cache after install and even tried wiping before and after zip install. Still get the bootloop.
Even tried installing using Rom Manager and get the same bootloop.
Do I need to change the file name or something? I'm kinda stuck. Any help would be great.
Thanks guys
I don't have a PC so can't flash with that.
Sent from my GT-I9300 using xda app-developers app
I'm sure about your phone, but with mine, I just waited a couple of nights for a new nightly. I'm on nightly from 11/9/13 and its been working OK. With it being a nightly, there's always gonna be problems. So I wouldn't worry so much about that, and just wait for the official. but then again, I'm no expert.
Sent from my SCH-I535 using xda app-developers app
SilentCCR said:
S3 I9300
Pacman rom's. Nightly
Latest CWM touch
Problem I'm having is every time I try to flash the nightly update, it says update complete then when I reboot the phone goes into a bootloop and have to restore from backup.
Using CWM I have tried installing zip from SD card as well as from the external SD card.
I have wiped cache & dalvik cache after install and even tried wiping before and after zip install. Still get the bootloop.
Even tried installing using Rom Manager and get the same bootloop.
Do I need to change the file name or something? I'm kinda stuck. Any help would be great.
Thanks guys
I don't have a PC so can't flash with that.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
are you using a custom kernel? if so the bootclasspath is probably borked.
Pvy.