[Q] Hekp~~while I am installing android rom - HD2 Android Q&A, Help & Troubleshooting and Genera

Can anybody tell me what happened in the installing procedure
It showed these message:
An error has occored
Rea below for more information
Error description: CONFIG load failed.
Infos: .\RSPL\RSPL.cpp(725)
Error description: CONFIG: can't config file
Info: .\RSLP\RSLP.cpp(304)

If you are trying to load this in XP then you must download the hotfix

open windos mobile device center (or activesync, depending on your OS) - connections - untick ''allow usb connections'.

May I ask one more question....
I had searched such problems I happened
All the results I had searched showed that the problems comes from authority
But I have log in my computer as Administrator, why I got this result?
I think that many people have the same problems, so I hope that everybody can talk about this more.
Thank for your patient~

Related

no usb connectiion with XP SP2

Hi All,
i am really looking for some help here, as lst 3-4 hours were fully unsuccessful for me... My laptop (XP SP2) stopped recognizing my tytn via usb. Once i connect the device, i go thru the Found new hardware wizard. At the end of process (no matter i select automatic update, or direct) it will give me an error: windows mobile-based device could not be installed... an error occured during the instalation. The reason is that it is looking for the USB driver in c:/windows/inf/oem4.inf file. This file directs to usb8023x.sys, which is supposed to control the connection.
Last few blocks from setupapi look like:
#-166 Device install function: DIF_INSTALLDEVICEFILES.
#I124 Doing copy-only install of "USB\VID_0BB4&PID_0B04\00197735-4275-0151-1800-0050BF3F5173".
#-011 Installing section [RNDIS.NT.5.1] from "c:\windows\inf\oem4.inf".
#E358 An unsigned or incorrectly signed file "c:\windows\inf\oem4.inf" for driver "Windows Mobile-based Device" blocked (server install). Error 1168: Element not found.
#E122 Device install failed. Error 1168: Element not found.
#E157 Default installer failed. Error 1168: Element not found.
#-166 Device install function: DIF_REGISTER_COINSTALLERS.
#I056 Coinstallers registered.
#-166 Device install function: DIF_INSTALLINTERFACES.
#-011 Installing section [RNDIS.NT.5.1.Interfaces] from "c:\program files\microsoft activesync\drivers\wcerndis.inf".
#I054 Interfaces installed.
#-166 Device install function: DIF_INSTALLDEVICE.
#I123 Doing full install of "USB\VID_0BB4&PID_0B04\00197735-4275-0151-1800-0050BF3F5173".
#E122 Device install failed. Error 2: The system cannot find the file specified.
#E154 Class installer failed. Error 2: The system cannot find the file specified.
#I060 Set selected driver.
#I125 Installing NULL driver for "USB\VID_0BB4&PID_0B04\00197735-4275-0151-1800-0050BF3F5173".
#E122 Device install failed. Error 2: The system cannot find the file specified.
[2007/04/15 00:59:57 1784.12 Driver Install]
#-019 Searching for hardware ID(s): usb\vid_0bb4&pid_0b04&rev_0000,usb\vid_0bb4&pid_0b04
#-018 Searching for compatible ID(s): usb\class_ef&subclass_01&prot_01,usb\class_ef&subclass_01,usb\class_ef
#-198 Command line processed: C:\WINDOWS\system32\services.exe
#I022 Found "USB\Class_EF&SubClass_01&Prot_01" in C:\WINDOWS\inf\oem4.inf; Device: "Windows Mobile-based Device"; Driver: "Windows Mobile-based Device"; Provider: "Microsoft Corporation"; Mfg: "Microsoft Corporation"; Section name: "RNDIS.NT.5.1".
#I023 Actual install section: [RNDIS.NT.5.1]. Rank: 0x00002000. Effective driver date: 10/28/2005.
#I022 Found "USB\Class_EF&SubClass_01&Prot_01" in C:\WINDOWS\inf\oem37.inf; Device: "Windows Mobile-based Device"; Driver: "Windows Mobile-based Device"; Provider: "Microsoft Corporation"; Mfg: "Microsoft Corporation"; Section name: "RNDIS.NT.5.1".
#I023 Actual install section: [RNDIS.NT.5.1]. Rank: 0x00002000. Effective driver date: 10/28/2005.
Would appreciate any help (reinstalling the XP is not an option for me...). TyTN is working with no problems being linked to other computers.
Have you used the installation disc?
Mike
Installation disk for what? The thing is that the most recent RNDIS and "Windows mobile-based device" are part of XP SP2 pack... The other thing is that everything was working perfectly well for me till yesterday. This does look like smth has got corrupted, but SP2 repair did not help.
USB problem...
Hey, I have the same problem for over 3 months now...
The strange thing is, IR an Bluetooth work well, it's a TyTn thing because a Qtek 9100 or 8310 are perfectly pairable.
I also have this with ALL PC's using activesync 4.x. I first thought it was my USB cable that was defective, but this seems to be OK (sync perfect with all qteks PSP etc)
Altough i haven't used it with my vista configuration yet i think it will have the same problem...
Now i'm stuck with the o so slow IR because there's no answer for this on any site... (long live google)
nobody has an idea?
I can't believe that
Anyone fixed this as at the moment I cannot connect my hermes to my XPSP2 machine.
Mine wasn't working, then it worked. Don't know what I did.
But know the USB internet connect option doesn't work.
sigh...i hate windows
sorry double post. can't find the delete post option

[Q] Need help!....I'm stuck!

EDIT: SOLVED ALL MY PROBLEMS THANKS AGAIN FOR HELPING
Hi
so im trying to install this Rom and it needed 400mb recovery
so i tried to install it but i cant get DFT installer to recognize my phone or something i get this common error:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
and i tried a lots of solutions but no change
then i wiped all data on my phone and my sd card... tryed again and the same thing!
tried task29 and the same error .. it seems that no installer is recognizing to my phone and now im without Rom .
pleeeaaaas help and i'll be really appreciated
try these
in win7/vista run application as administrator
in xp run as -> uncheck "protect my computer data..." or simpy run as administrator if you know your admin info
also if you are using active sync just make it so it doesnt allow usb connection (in active sync, file -> conn. settings -> there you will find it, just make sure its unchecked)
edit:
just remembered, before starting to flash dtf disable firewall and/or antivirus cause they can cause trouble as well
You have to disable USB connections in ActiveSync. Should work then.
shtabe said:
try these
in win7/vista run application as administrator
in xp run as -> uncheck "protect my computer data..." or simpy run as administrator if you know your admin info
also if you are using active sync just make it so it doesnt allow usb connection (in active sync, file -> conn. settings -> there you will find it, just make sure its unchecked)
edit:
just remembered, before starting to flash dtf disable firewall and/or antivirus cause they can cause trouble as well
Click to expand...
Click to collapse
I tried all of these earlier an it didn't work
then i tried it with the fire wall turned off it didn't work either.
can't i just reset my whole phone and install hspl and magldr again?
and thanks for helping anyway
make sure you have the correct drivers installed
I got the same error few nights ago, and it turned out to be the dft package. I dl 'd the 150meg cwm installer several times that night,same each time. But I had a copy of the 250meg one I'd downloaded 5days ago, edited the flash.cfg added the image file and it flashed first time.
Give this a try ..
http://forum.xda-developers.com/showthread.php?t=981811
It Should Help ..
thanks WarlockW that was very helping
but i tried to flash the 400mb revovery it gave me some kind of error
so now im installing the 350mb and then i'll install the rom and i hope it works..
but im reeaaally thankfull to u and everybody that tries to help .
EDIT:the error that i have when flashing 400 mb is
first some words and numbers then this written in red
PARSE CFG FAILD
AF FAILD 6!
what does this means?
can i fix it??
It's OKAY
i solved all my problem
i runed the installation from other pc and it worked
Thanks guys for helping
snipy said:
It's OKAY
i solved all my problem
i runed the installation from other pc and it worked
Thanks guys for helping
Click to expand...
Click to collapse
What version of windows were you using that didn't work, and what version were you using that did?
win7 didn't work.
then when i tried win vista it worked perfectly..
then i tried with another usb port on win7 and it worked.
so the OS wasn't the problem .

[Q] hd2 does not boot to windows

my phone does not boot to windows its leo and after it stops at this pic attached any ideas what to do ? to install a new rom to it and how thanks as I understand I need the active sync to be connected and in my case i cant
you dont' need activesync to connect. you can simply hold the voume down rocker and power button (at the same time) during boot until you get the tricolored (three colored) boot screen.
download the HTC Toolkit. download HSPL. from the tricolor screen you can flash HardSPL 2.08. then open the toolkit and flash magLDR.
go to the development section of the forum and look at one of the first posts ... they outline how to root, get new bootloader, and to flash a rom. they are written simply and easy to understand.
good luck
I installed the hspl using tool kit but it doesn't let me install MAGLDR error msg missing readme.txt then
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
any ideas
U have Windows mobile device center in ur computer?
Did you consider putting " missing readme.txt then Error Description: Config load failed. Info: .\RSPL\RSPL.cpp (725)" into Google? Its a really common error...
TyphooN_CM7_v3.7.5-MAGLDR
Thank u all for your help I installed (TyphooN_CM7_v3.7.5-MAGLDR) successfully but the wifi is not working properly it disconnects right away and how can I sync contacts from outlook ?
For outlook sync Google myphoneexplorer (no spaces)

Htc hd2 window intallation problem.?

i'm currently running wp 6.5, i don't know why but there are many problems in this window like set hack sometime's etc.
any ways i want to install wp 7.
i watch videos from youtube that how to install it.
but when i try to flash mobile with "DFT Window Installer for HTC Leo [DWI100]" an error occur after searching.
An error has occurred.
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Basically, i don't know how to install window phone and an error occur i don't know why, so help me.
john9 said:
i'm currently running wp 6.5, i don't know why but there are many problems in this window like set hack sometime's etc.
any ways i want to install wp 7.
i watch videos from youtube that how to install it.
but when i try to flash mobile with "DFT Window Installer for HTC Leo [DWI100]" an error occur after searching.
An error has occurred.
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Basically, i don't know how to install window phone and an error occur i don't know why, so help me.
Click to expand...
Click to collapse
When you click on the exe to install WP7 right click it and select run as administrator. If that does not work go into MAGLDR option 4 and select enable last 24.
see the below link on how i got the error then resolve it
DWI.exe
I am installing Windows phone 7.8 on HTC hd2. Don't know where to find the "DWI.exe". Help pls

[Q] HTC HD2: WP 7.8 cellular data problem

I flashed "2_HD2 Pdaimatejam Rom Wp7.8 OS 7.10.8858.136 RMT v8.7" ROM and than I get a cellular data connection problem: the configuration is good, when I tried to load a internet page, the loader bar seems in progress but it stops at a certain point and nothing happened... Can someone help me understanding what's wrong? Thank you.
send cab file fix... is many times written in Pdaimatejam ROM topic...
http://forum.xda-developers.com/showpost.php?p=35489458&postcount=6348
dxdy said:
send cab file fix... is many times written in Pdaimatejam ROM topic...
http://forum.xda-developers.com/showpost.php?p=35489458&postcount=6348
Click to expand...
Click to collapse
Thanks, how can I send it? I haven't read about it (too many pages) ... Hope this will solve the problem
read tutorial (from my signature or download from pdaimatejam)...
dxdy said:
read tutorial (from my signature or download from pdaimatejam)...
Click to expand...
Click to collapse
Ok, now everything's is fine! Thank you! :fingers-crossed:
problem with cab sender
dxdy said:
read tutorial (from my signature or download from pdaimatejam)...
Click to expand...
Click to collapse
Hello!
I would like to ask your help!
I have a problem with internet connection, mail sync and etc. what is using mobile internet (cellular data connection).
I tried to use the cab sender as described in the tutorial but, I get this error message in the dos promt window when I want to select the "send cabs to device" function.
error message: 'CHOICE' is not recognized as an internal or external command, operable program or batch file
Thanks in advance!
Regards: Gyula
For XP you must use http://xboxmod.sylvester20007.com/TOOLS/wp7_cabsender_winxpfix.rar
dxdy said:
read tutorial (from my signature or download from pdaimatejam)...
Click to expand...
Click to collapse
I use the XPcabfixer but I have another problem, I have a guess but I am not sure what should be the problem.
Please help me a little more
error code: 800B010A
error message: A certificate chain could not be built to a trusted root authority
Thanks
send files
gianniJ said:
Thanks, how can I send it? I haven't read about it (too many pages) ... Hope this will solve the problem
Click to expand...
Click to collapse
to send the files to the device using cab sender i have to start the phone with volume down+start button?????
radukw said:
to send the files to the device using cab sender i have to start the phone with volume down+start button?????
Click to expand...
Click to collapse
no... phone must be turned ON and connected via USB... Zune must be closed... all is described in install tutorial...
HD2 windows 7.8 DTF
Hi can any one Please help me ive followed all the video steps from juicyboose's tutorial ive got as far as the DFt install i click next and next again but it comes up with these errors
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
PLEASE HELP
did you set magldr options before flash WP7?
read install tutorial from my signature
Thank you
dxdy said:
did you set magldr options before flash WP7?
read install tutorial from my signature
Click to expand...
Click to collapse
I didnt set magldr flash, how do u do that.... please
i just followed the tutorial like for like .. in the same time ... but the last inbstall failed comimg up with that error message
please help ,..
did you set USELAST24NAND?
zune
dxdy said:
no... phone must be turned ON and connected via USB... Zune must be closed... all is described in install tutorial...
Click to expand...
Click to collapse
sorry for asking but i bought the htc hd 2 one week ago,so am i a begginer. what is is zune?i read the tutorial for cab sender.zune is the last problem,i hope.
zune is PC application for sync media files and update WP devices... "must have tool" if you have WP...
also all recommended tools and apps for WP and PC is written in install tutorial... this you must have if you want use WP... all links for download is there also
also is recommended to have Windows 7 or 8... with Windows XP you can something but if you want use WP and all potential is recommended to have Win 7 or 8
it worked!
dxdy said:
zune is PC application for sync media files and update WP devices... "must have tool" if you have WP...
also all recommended tools and apps for WP and PC is written in install tutorial... this you must have if you want use WP... all links for download is there also
also is recommended to have Windows 7 or 8... with Windows XP you can something but if you want use WP and all potential is recommended to have Win 7 or 8
Click to expand...
Click to collapse
thanks a lot! i had some problems with my laptop and i couldn't send the files to my phone but today i resolved and data connection works
800705B4 problem
When I run CABsender.bat or wCabSender, update of any CAB always fails due error 800705B4 : timeout/not enough space.
Computer sends CAB to the phone and then phone reboots. After reboot phone stays black for 30 secs, than it shows "connect USB" image and after that it reboots. WP7 says that update was unsuccessful, CAB sender reports error 800705B4.
Code:
Setting the installing update state.
Error during update: Function: UpdateMain::ReadConfig, Line: 242, Hr: 0x800705b4, GetLastError: 0
Error during update: Function: UpdateMain::Init, Line: 143, Hr: 0x800705b4, GetLastError: 0
Error during update: Function: UpdateMain::StartUpdate, Line: 1216, Hr: 0x800705b4, GetLastError: 0
Update failed. hr = 0x800705b4
Update Application - Completed Post Update @ 00:02:09
Update Application - Returning 0x800705b4
Unable to unset simulation mode
Attempting to clear the 'installing IU' update state
succeeded
Clearing the persistent update flag.
succeeded
I have 4GB SD card and phone recognizes it fine. I tried to reflash phone ROM without SD-card, CAB sending has same problem. Although most of the phone and live services work fine, many programs like "Leo advanced", "Program manager", "Connection setup" do not launch.

Categories

Resources