Related
I'm working on USB host support on our i9000. With the help of Galaxy Player kernel sources I think we manage to do this. Galaxy Player DOES support USB OTG host mode and is almost identical to our Galaxy S, the main difference is lack of GSM/CDMA module. Same CPU, same USB switcher (FSA9480) etc. Kernel sources looks promissing. You may say that i9000 is not able to provide power to power the device, but we can use self powered USB hub to do that
Look at the sources:
SAMSUNG OPEN SOURCE RELEASE CENTER -> Mobile -> MP3 Player & Etc. -> YP-GB1
What a great news! Following with interest!
Since this is not yet development, I will move it to general.
As soon as you have something ready, you can open a new thread in the development subforum or ask me to move the existing one.
Cheers
Awesome news...!!!
You are the guy!!!
From a far away galaxy(S)
Thank you. This will be great.
Sent from my GT-I9000 using Tapatalk
http://forum.xda-developers.com/showthread.php?p=20797838
Some other dev. has already made this?
Thx for reading, press THANKS if u like
you give us a good information but you link is for the galaxy note, no for the galaxy s.
so much things can be variable from device to one other even if they come from the same brand "processeur,usb, drivers..."
Wait and see for this project is very usefull to use usb host
O-T said:
http://forum.xda-developers.com/showthread.php?p=20797838
Some other dev. has already made this?
Thx for reading, press THANKS if u like
Click to expand...
Click to collapse
We are talking about devices powered by S5PV210 cpu, Note is more like SGS2, for us completely different story.
Compile kernel with support for module fuse.ko
or
Check out this app http://forum.xda-developers.com/showthread.php?p=19815461
Can someone explain what USB OTG Host mode means ?? i simply dont get it ....
saphirrot said:
Can someone explain what USB OTG Host mode means ?? i simply dont get it ....
Click to expand...
Click to collapse
Google helps dude. Search before asking.
http://en.wikipedia.org/wiki/USB_On-The-Go
Right there, first line:
"USB On-The-Go, often abbreviated USB OTG, is a specification that allows USB devices such as digital audio players or mobile phones to act as a host allowing a USB flash drive, mouse, or keyboard to be attached."
Google helps dude. Search before asking.
Click to expand...
Click to collapse
WAU, thats ****ing friendly boy... instead of posting a site like wikipedia, a small sentence will help a lot more !
Great,keep it up B)
Any News?
sztupy made it working on teamhacksung's ICS kernel.
It's also working on Onecosmics ICS, so if you are on one of these ROMS, try this kernel.
http://forum.xda-developers.com/showthread.php?t=1450298
It's also implemented in the Devil and Glitch ICS Kernels...
Engelhuber said:
sztupy made it working on teamhacksung's ICS kernel.
It's also working on Onecosmics ICS, so if you are on one of these ROMS, try this kernel.
http://forum.xda-developers.com/showthread.php?t=1450298
It's also implemented in the Devil and Glitch ICS Kernels...
Click to expand...
Click to collapse
Hello,
i'v try to get OTG whith RC3.1 and glitch V14, but can't get mounted volume...
somebody get OTG works Onecosmics ICS?
OTG and Onecosmics RC3.1...
What kernel must choose?
Ledadu said:
OTG and Onecosmics RC3.1...
What kernel must choose?
Click to expand...
Click to collapse
See my last Post.
There is a modded hacksung Kernel and Glitch v14, Devil for example.
---------- Post added at 10:24 PM ---------- Previous post was at 09:28 PM ----------
rustako said:
Hello,
i'v try to get OTG whith RC3.1 and glitch V14, but can't get mounted volume...
somebody get OTG works Onecosmics ICS?
Click to expand...
Click to collapse
Never tried any storage. Tried to get my DSLR working, but had no luck.
USB host controller detects my Cam with additional power, but dslr controller doesnt
Dont know whats wrong. Let me know if you have any news
I tried whith glitch V14 on onecosmic rc3.1 but detect nothing...
And now i'm on onecosmic rc4 (pulled) whith neo kernel, and the driver is detected too, but always nothing on usb tab in "usn host controler" app..
i put operation mode on OTG mode..
i'v got :
OTG [on the go] - USB HOST Câble / Adaptateur pour Samsung Galaxy i9100 S2 / SII - micro USB <-> USB FEMALE
USB MALE <-> Mini usb
Mini Usb<-> Hub usb 2.0
USB key
USB HDD
hello guy's.... maybe this question is relative but I need some direction...any one can tell me what is the most stable rom for iconia a500?
thanks.
Sent from my SAMSUNG-SGH-I777 using xda premium
I would suggest any of the Near stock 3.2.1 roms WITH Stock kernel..
Also the rom by Moscow DESIRE IS A GOOD ROOM . .
Fallow all flashing instructions..
good luck..
Thor's Roms based on HC, are pretty good and stable too, just as long as you are not prejudice about who is following gpl or not... Also his ICS ROM is good too, with the exception of camera not working yet...
MD's Alexandra really good.
Civato Flexstriker is good.
Both of those are based on Base HC 3.2.1.
Personally i have played with alot of roms and currently running Honeylicious, but its not available any more. After playing with quiet few ROMs, i came to conclusion that all tablets are dam temperamental. Just because some Rom worked perfectly on some one's tablets from the start; dont mean it will work perfectly on your tablet OR Vice Versa. Which just mean you will have to put little more time in, but in the end they will/should works perfectly. So take your time and play around with ROMs.
Thanks guys for the advice...
Sent from my A500 using xda premium
I'm actually using Honeylicious 3.2.1, but it seems disappeared from XDA..
I don't know why..
It works pretty good, just a problem when I try to insert my ext hd
For the rest it is very stable e fluid
i believe the developer left xdas iconia forum. Something about sold his device.that rom was based on roms by civato. search his threads in the DEV AREA
Good luck
MadMav88 said:
I'm actually using Honeylicious 3.2.1, but it seems disappeared from XDA..
I don't know why..
It works pretty good, just a problem when I try to insert my ext hd
For the rest it is very stable e fluid
Click to expand...
Click to collapse
Try Drive Mount from the Market
3.2.x supports a fat32 partition (sometimes), but if your HD is ntfs, you need Drive Mount.
Moscow Desire said:
Try Drive Mount from the Market
3.2.x supports a fat32 partition (sometimes), but if your HD is ntfs, you need Drive Mount.
Click to expand...
Click to collapse
I tried it, but nothing.. The touchscreen freeze when I plug in the USB.. I don't know why it could be a rom bug
Inviato dal mio Packard Bell [email protected] 3.2.1 usando Tapatalk
MadMav88 said:
I tried it, but nothing.. The touchscreen freeze when I plug in the USB.. I don't know why it could be a rom bug
Inviato dal mio Packard Bell [email protected] 3.2.1 usando Tapatalk
Click to expand...
Click to collapse
Shouldn't be a rom bug, KJY used 100% stock OS and kernel. Maybe something got corrupted a little, who knows. only takes 1 bit of 0's and 1's to make a mess Maybe some "rogue" app.
But if you reflash, and it doesn't matter who's rom you use, and it freezes again, well, it's probably a hardware issue. Either the tab or the hdd.
I would guess anyhow. Reflash, and check it before installing apps. If it's FAT32, should see it no problem. NTFS and you'll probably need Drive Mount.
Good luck!
EDIT: Also, try stuffing a flash stick in there, and see if it does the same.
It's best to try and isolate the problem. Can the table connect to a thumb drive with no problems? Can you access the external drive with another device? If the answer to both of those questions is yes, that would point to an issue with the tablet firmware. If the external drive works but the tablet doesn't work with a thumb drive either, it may be a hardware or firmware problem.
Jim
some hard drive enclosures just do not work well with the Iconia chipset or drivers. This would depend on who made them. .
I have a few that work flawless. One this is actually a better brand no luck at all.
Moscow Desire said:
Shouldn't be a rom bug, KJY used 100% stock OS and kernel. Maybe something got corrupted a little, who knows. only takes 1 bit of 0's and 1's to make a mess Maybe some "rogue" app.
But if you reflash, and it doesn't matter who's rom you use, and it freezes again, well, it's probably a hardware issue. Either the tab or the hdd.
I would guess anyhow. Reflash, and check it before installing apps. If it's FAT32, should see it no problem. NTFS and you'll probably need Drive Mount.
Good luck!
EDIT: Also, try stuffing a flash stick in there, and see if it does the same.
Click to expand...
Click to collapse
jliedeka said:
It's best to try and isolate the problem. Can the table connect to a thumb drive with no problems? Can you access the external drive with another device? If the answer to both of those questions is yes, that would point to an issue with the tablet firmware. If the external drive works but the tablet doesn't work with a thumb drive either, it may be a hardware or firmware problem.
Jim
Click to expand...
Click to collapse
I don't know, I got this
problem with 3.0.1 PB stock, then I updated it to 3.2.1 PB stock and no freeze with the same hdd plugged in.. Then flashed with MyG100w rom (by XDA) but no try about this problem.. 3 days later i flashed with HL 3.2.1 and it freezes the touchscreen with hdd plugged in..
The hdd is working pretty good, no problem with PC's or tv's, just some troubles with this tablet..
It's a expansion 1tb by seagate, 3 partitions ( 2 ntfs + 1 fat32) and when the USB is correctly plugged in, there's a green led always lighted up, with my tab this led is on, so it's correctly plugged in..
I don't know if I'll reflash the rom, because between a little time will arrive ics.. i can wait for it.. Or maybe I'll reflash before, i don't know
Thanks for your helping )
Sent from my Packard Bell [email protected] 3.2.1 using Tapatalk
is it possible that cm9 will get HD streaming on YouTube and Netflix working soon?
As soon as they get HW acceleration working. Devs are working on it
Sent from my AOKP i777 (probably while in class)
redhawk79 said:
As soon as they get HW acceleration working. Devs are working on it
Sent from my AOKP i777 (probably while in class)
Click to expand...
Click to collapse
do you know how long they have been working on it?
Neku_Sakuraba said:
do you know how long they have been working on it?
Click to expand...
Click to collapse
Quite a while. It won't happen until they get the 3.0 kernel done. You can follow the development here, but don't ask them for an estimated completion date:
http://forum.xda-developers.com/showthread.php?t=1677219
leapinlar said:
Quite a while. It won't happen until they get the 3.0 kernel done. You can follow the development here, but don't ask them for an estimated completion date:
http://forum.xda-developers.com/showthread.php?t=1677219
Click to expand...
Click to collapse
thanks. i am pretty new to the nook color hacking scene and had no idea what is going on
Hello, I've been trying to run cm9 off an SD card. The problem is I can get the first part to start "the cyanoboot screen" then when it goes to fire up cm9, it goes to a black screen. Am I losing my mind? Thanks
Sent from my NookColor using xda premium
purpleurkle said:
Hello, I've been trying to run cm9 off an SD card. The problem is I can get the first part to start "the cyanoboot screen" then when it goes to fire up cm9, it goes to a black screen. Am I losing my mind? Thanks
Sent from my NookColor using xda premium
Click to expand...
Click to collapse
Which method did you follow for installing CM9?
Is it new or upgrade from other rom?
Produced by NookColor at ICS 4.0.4
Not sure, its one of eyeballers nightlies. And I'm guessing I'm not putting the correct cm9 program on my card, are their different mods for your hard drive then their are for the bootable sd card? Now my problem is that when I put my sd card with cm7 back in, the nook had to reload its stock rom I guess cause when I turned it back on it said something like it was reloadIng original image. Then I had to register it again. What's freaking me out is that now when I run My cm7 sd card, its running choppy, things are force closing in every direction, when before it ran perfectly. Have I somehow shot myself in the foot or is there some way to fix this? Thankyou for your help
Sent from my NookColor using Tapatalk 2
Both Cm7 and Cm 9 are running from SD?
Like Dualboot?
purpleurkle said:
Hello, I've been trying to run cm9 off an SD card. The problem is I can get the first part to start "the cyanoboot screen" then when it goes to fire up cm9, it goes to a black screen. Am I losing my mind? Thanks
Sent from my NookColor using xda premium
Click to expand...
Click to collapse
Purple-you should look here http://forum.xda-developers.com/showthread.php?t=1696400
Did you use an open GL cm9? I'd almost bet you did. Follow the instructions given by dizzy and leap and it should get you going. I tried updating from cm7.2 to cm9 open GL (I think June 11th) and mine blew up pretty bad. Not even a restore from a back up helped.
CM9 on SDcard install
I've been running CM9 for a couple months now. I installed a fresh image on a Sandisk 16Gb class 4 card using Samiam303's variation on Verygreen's procedure and update occasionally using CM9 nightlies from http://techerrata.com/browse/nightly_kangs/encore (see [ROM][NC] Unofficial CM9 Nightly builds - with/without OpenGL). It's been pretty stable, a bit slow at times, but mostly works with the notable exception of Netflix and USB/UMS.
I did run into one other glitch when going from the 6/13 to the 6/20 nightly OpenGL update. MTP stopped working. I tried several different driver configs on my XP machine without success. Going back to the 6/13 nightly brought it back and that's where I am now. LeapinLar solved the problem for ADB by modifying the .inf file which might give a clue to how to get MTP working, but that's stretching my capability. This and many other useful tips are in his post [USER][TIPS]CM7/CM9 User Tips From LeapinLar.
drhunt55 said:
I've been running CM9 for a couple months now. I installed a fresh image on a Sandisk 16Gb class 4 card using Samiam303's variation on Verygreen's procedure and update occasionally using CM9 nightlies from http://techerrata.com/browse/nightly_kangs/encore (see [ROM][NC] Unofficial CM9 Nightly builds - with/without OpenGL). It's been pretty stable, a bit slow at times, but mostly works with the notable exception of Netflix and USB/UMS.
Click to expand...
Click to collapse
Netflix does not work for anyone. But UMS and MTP should work. For MTP, but sure USB debugging is off in development settings. For UMS, it needs to be checked in settings and when you plug the cable into the PC, a dialog should pop up saying to turn on USB Storage. Be sure to select that.
Sent from my Nook Color running ICS and Tapatalk
I was under the impression we were never to expect HW acceleration to work? Has this changed?
Hey guys,
After viewing this post in the trouble shooting section in our forum
http://forum.xda-developers.com/showthread.php?t=2157352...tys0n have discovered that we have a usb hub so theoretically we only need a custom kernel and drivers...and we can build one for our devices right??
For all devs I hope some help cz this is a very important step forward if we could do it and am ready to help from testing to develping with you
and thank you
seedrom193 said:
Hey guys
After viewing this post in the trouble shooting section in our forum
http://forum.xda-developers.com/showthread.php?t=2157352...tys0n have discovered that we have a usb hub so theoretically we only need a custom kernel and drivers...and we can build one for our devices right??
For all devs I hope some help cz this is a very important step forward if we could do it and am ready to help from testing to develping with you
and thank you
hit thanks if I helped you
sent from the wonderfull s3 mini GT-I8190 using xda app
Click to expand...
Click to collapse
I also noticed that this have been up before
http://forum.xda-developers.com/showthread.php?t=2043500&highlight=usb+otg
Other threads with intresting kernel projects:
[KERNEL][MOD] BLN kernel and liblights v3
SIRI KERNEL. From post 30.
So there have been some work on it...so now we know that the hardware are present and we only need a mod or a custom kernel to enable this feature...
hit thanks if I helped you
sent from the wonderfull s3 mini GT-I8190 using xda app
Come on guys the post died in here we want some actions and dev
sent from the super siii mini GT-I8190 using xda premium app.
It won't work. Although the hub is present, the board doesn't provide the usb with enough power fot otg to work.
To get otg working, you will have to edit vbus and voltage values. It is very dangerous as it can fry your usb and/or the entire SoC.
So i would recommend only experienced members to do it.!
I do not respond to tech support via PM
why gona to kerrnel ? i have just searched 1 minute and find this https://play.google.com/store/apps/details?id=net.shajul.usbotg&hl=fr
and you can see in menu app are compatible with our phone just feed if worked i can't test i dont have mini usb hub
Shaaan said:
It won't work. Although the hub is present, the board doesn't provide the usb with enough power fot otg to work.
To get otg working, you will have to edit vbus and voltage values. It is very dangerous as it can fry your usb and/or the entire SoC.
So i would recommend only experienced members to do it.!
I do not respond to tech support via PM
Click to expand...
Click to collapse
Why is the hardware there, I mean why did samsung put the hardware in the first place?
Sent from my GT-I8190 using Tapatalk 2
Let's hope someone with a otg cable can try it out. I just relalised that my old cable is broken
External power will be needen then if board can't provide it.
---------- Post added at 10:47 AM ---------- Previous post was at 10:38 AM ----------
vonuzu said:
Why is the hardware there, I mean why did samsung put the hardware in the first place?
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
I8190 is built on ST-Ericsson NovaThor U8420. Hardware is present, but probably samsung never cared to use it.
tys0n said:
Let's hope someone with a otg cable can try it out. I just relalised that my old cable is broken
External power will be needen then if board can't provide it.
---------- Post added at 10:47 AM ---------- Previous post was at 10:38 AM ----------
I8190 is built on ST-Ericsson NovaThor U8420. Hardware is present, but probably samsung never cared to use it.
Click to expand...
Click to collapse
It has been tried out with stock kernel and otg cable and it didn't work. See the link in the second post.
Sent from my GT-I8190 using Tapatalk 2
vonuzu said:
Why is the hardware there, I mean why did samsung put the hardware in the first place?
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
Samsung gives features according to the price range of the device! Look at Galaxy Ace 2 and SGS Advance. Bith devices have same board, but ace is clocked at 800 mhz while ace is at 1 ghz.
I do not respond to tech support via PM
But if the hardware exist...that leave us with the software,will it will be hard but we may be able to unlock it .Right?
sent from the super siii mini GT-I8190 using xda premium app.
USB OTG supporting
USB OTG is a really good function. I would be great if SG S3 mini will support it. I think, a problem isn´t in a hardware, but in a software and a good custom kernell solve this problem. I hope, someone help us with this as soon as possible. Please, please, please .......
yes and finally its here...check it out
http://forum.xda-developers.com/showthread.php?t=2186034
sent from the super siii mini GT-I8190 using xda premium app.
Great ^^
Hi to all i don't have the usb male-male hub and i got the ordinary otg cable only. . i've got my phone at Hamburg s3 i8190 and tried testing the otg trick. . the only thing i'm wondering is that after i rooted my phone and downloaded some roms here i restarted my phone and tried plugging in my otg cable and 1 tb hdd and somehow it works fine even though it drains my battery faster >_<. . sorry for my bad english >_<
Baseband version:
I8190xxama2
Kernel version:
3.0.31-790526
[email protected] #5
smp preempt thu mar 7 20:05:24
cet 2013
Build nnumber:
jko54k.I8190xxama2
rigilkent said:
Hi to all i don't have the usb male-male hub and i got the ordinary otg cable only. . i've got my phone at Hamburg s3 i8190 and tried testing the otg trick. . the only thing i'm wondering is that after i rooted my phone and downloaded some roms here i restarted my phone and tried plugging in my otg cable and 1 tb hdd and somehow it works fine even though it drains my battery faster >_<. . sorry for my bad english >_<
Baseband version:
I8190xxama2
Kernel version:
3.0.31-790526
[email protected] #5
smp preempt thu mar 7 20:05:24
cet 2013
Build nnumber:
jko54k.I8190xxama2
Click to expand...
Click to collapse
nice i think devs should know about this...
Sent from my GT-I8190 using xda premium
I discovered how to without external power
just that I cant post links =( directly, put htcmania with a dot before com
htcmania com/showthread.php?p=10644905
or my another post in taringa
taringa net/posts/celulares/17230944/Aporte-USB-OTG-en-el-Galaxy-S3-mini-funcionando-al-100.html
A little traduction will be:
copy the modules into /system/lib/modules with rootbrowser or similar browser
install USB OTG Helper from the Playstore
just connect the usb with OTG at the phone and click the button "Mount" in the app
and you will have your USB mounted at /storage/UsbOtgDrives/drive_1 !!!
I have the custom ROM AOKP 4.2.2 from maclaw
try with another ROM's or stock ROM and tell me if works fine =D
it will work with stock rom?
darkenemy999 said:
just that I cant post links =( directly, put htcmania with a dot before com
htcmania com/showthread.php?p=10644905
or my another post in taringa
taringa net/posts/celulares/17230944/Aporte-USB-OTG-en-el-Galaxy-S3-mini-funcionando-al-100.html
A little traduction will be:
copy the modules into /system/lib/modules with rootbrowser or similar browser
install USB OTG Helper from the Playstore
just connect the usb with OTG at the phone and click the button "Mount" in the app
and you will have your USB mounted at /storage/UsbOtgDrives/drive_1 !!!
I have the custom ROM AOKP 4.2.2 from maclaw
try with another ROM's or stock ROM and tell me if works fine =D
Click to expand...
Click to collapse
bro..,
it will work with stock firmware?
and it doesnot required an external power for operating?
pls help me urgently.;...
darkenemy999 said:
just that I cant post links =( directly, put htcmania with a dot before com
htcmania com/showthread.php?p=10644905
or my another post in taringa
taringa net/posts/celulares/17230944/Aporte-USB-OTG-en-el-Galaxy-S3-mini-funcionando-al-100.html
A little traduction will be:
copy the modules into /system/lib/modules with rootbrowser or similar browser
install USB OTG Helper from the Playstore
just connect the usb with OTG at the phone and click the button "Mount" in the app
and you will have your USB mounted at /storage/UsbOtgDrives/drive_1 !!!
I have the custom ROM AOKP 4.2.2 from maclaw
try with another ROM's or stock ROM and tell me if works fine =D
Click to expand...
Click to collapse
can you write a new post in english!!
plenty of us cant read Spanish!!
Check this out: http://forum.xda-developers.com/showthread.php?t=2691624
Here is an instruction how the Galaxy S III mini can use USB-OTG without Root and Custom ROM:
http://usbstick.hechler.de/viewtopic.php?f=3&t=5241#p5575
A USB-OTG cable with power supply is needed and the app Total Commander with the USB-Stick Plugin.
Hello.
First time here. Forgive me if not right place to post.
Since android 5.0+, my support for OTG is missing. I'm on CyanogenMod.
On kitkat using CyanogenMod, I had that. Is there something I need to tweak before building to get the OTG working, or I'm missing a line in manifest? Every functionality works with my build, except the OTG.
I've done no changes or tweaks to the cm source when building. I just sync and build, but since 5.0 onwards, my OTG doesn't work.
I plug in USB pen drive or any input device and nothing happens
Thanks.
Sent from my Xperia Z2 using XDA Free mobile app
For some reason they haven't implemented it yet... I don't know why though.