Hello all.. I just bought my Defy (standard, not plus) this afternoon.. played around with Eclair for a bit (it's not upgrading to froyo for some reason) and decided it was time to root cuz I've seen way too much about it on these forums and I want to OC it and try CM7
unfortunately step 1 isn't working for me.. I can't get SuperOneClick to work.
I've followed all the steps, I've installed the latest drivers and everything.. I've got SuperOneClick v2.3.3
When I run it with my Defy connected with USB Debugging turned on, when I press Root, it says a certain driver is not installed.. so I closed the app and reopened it but the same thing shows up.
one of the options that pops up is whether I'd like the app to forcefully set up the ADB thing or something so I clicked that, but even then it doesn't work.. any ideas?
I really need to OC it to 1 or maybe 1.2 GHz
and the reason I bought it today was because I had read a lot about rooting a defy being very easy
Which SBF did you try for Froyo upgrade that didn't work? What country are you from?
Auris 1.6 vvt-i said:
Which SBF did you try for Froyo upgrade that didn't work? What country are you from?
Click to expand...
Click to collapse
I haven't tried any SBF thing yet.. All I've done with my Defy so far (apart from installing some games) is hooking it up to my PC with the debugging on and running SuperOneClick, which is where the problem's taking place..
I haven't tried flashing anything or using 2ndInit or anything like that
Right now, I'm in India
I had to use SuperOneClick 2.2 (defy froyo and milestone eclair). 2.3 did not work. It is really important which rev. you use and newer does not mean it will work with your phone.
For example for xperia x 8 I had to use 1.5.5 to work. Just try different revisions
I use 2.1 version and it work flawlessly for me.
Try some different version if that works or try on some different computer.
Which operating system you using?
I've Win7 Ultimate x64 and it works without any issue as Win7 automatically downloads required drivers.
Aright then, I'll try 2.1 or some other version a bit later.. hope it works
Eclair looks terrible after seeing stuff like ICS
I'm using win 7 as well, so I'm pretty sure thats not the problem
on a side note, I have a Green lens Defy, and I've read in a lot of places that the cam doesn't work with ICS.. Is the situation any different now or will the cam never work for this lens with ICS?
underage17 said:
Aright then, I'll try 2.1 or some other version a bit later.. hope it works
Eclair looks terrible after seeing stuff like ICS
I'm using win 7 as well, so I'm pretty sure thats not the problem
on a side note, I have a Green lens Defy, and I've read in a lot of places that the cam doesn't work with ICS.. Is the situation any different now or will the cam never work for this lens with ICS?
Click to expand...
Click to collapse
I also have same Green lens defy.
Cam also works with ICS but with Froyo kernel only.
Refer to this article:
http://forum.xda-developers.com/showthread.php?t=1432100
Okay, so I guess it worked.. I installed the Milestone overclock app and OC'd it to 1000 MHz (74 vsel) (whatever that means)
Shadowgun, which was working almost lag free earlier, started lagging a bit, haha
Guess I'll have to reboot or something and try again
*time to flash ICS*
EDIT: When I rooted, it didn't ask if I wanted to install busybox, nor did it ask for a reboot. Is that a problem?
underage17 said:
Okay, so I guess it worked.. I installed the Milestone overclock app and OC'd it to 1000 MHz (74 vsel) (whatever that means)
Click to expand...
Click to collapse
74 is too high. Set it at 58
Auris 1.6 vvt-i said:
74 is too high. Set it at 58
Click to expand...
Click to collapse
If I set it to 58, can I still clock 1ghz? What's the advantage of 58 over 74?
Sent from my MB525 using XDA
underage17 said:
If I set it to 58, can I still clock 1ghz? What's the advantage of 58 over 74?
Sent from my MB525 using XDA
Click to expand...
Click to collapse
temp increases with increase in vsel (which is nothing but a factor of voltage)
Battery life decreases with increase in vsel
Stability of the system increases with increase in vsel
Click to expand...
Click to collapse
the more clock speeds, more vsel you need.
high clock speed+ low vsel= crashes / low stability
high clock speed+ high vsel=less crashes / ok stability
low clock speed + high vsel= very less probability of crashes / high stability
low clock speed+ low vsel=high to med crashes / low-normal stability
So basically, it is about what you want, and how you balance it.
Click to expand...
Click to collapse
Ref: http://forum.xda-developers.com/showthread.php?t=1458313
underage17 said:
If I set it to 58, can I still clock 1ghz? What's the advantage of 58 over 74?
Sent from my MB525 using XDA
Click to expand...
Click to collapse
I've clocked it at 1100 GHz at 58 vsel. Advantage of 58 over 74 is lower battery temp and longer life.
Auris 1.6 vvt-i said:
I've clocked it at 1100 GHz at 58 vsel. Advantage of 58 over 74 is lower battery temp and longer life.
Click to expand...
Click to collapse
I've done this and everything's great right now
just one question.. ever since I installed cm9 my menu keys have stopped lighting up.. is that normal?
Btw is swype incompatible with cm9? I downloaded the beta but it doesn't work
And also does the latest version of opera mobile (not mini) work for you? On ics it crashes on startup
Sent from my MB525 using XDA
underage17 said:
I've done this and everything's great right now
just one question.. ever since I installed cm9 my menu keys have stopped lighting up.. is that normal?
Btw is swype incompatible with cm9? I downloaded the beta but it doesn't work
And also does the latest version of opera mobile (not mini) work for you? On ics it crashes on startup
Sent from my MB525 using XDA
Click to expand...
Click to collapse
Backlight only turns on at certain light level. If you go into a dark room, buttons should be lit.
Opera mobile and Google Chrome don't work, because of the lack of HWA.
Don't know about swipe - I have never liked it, using SwiftKey X
Auris 1.6 vvt-i said:
Backlight only turns on at certain light level. If you go into a dark room, buttons should be lit.
Opera mobile and Google Chrome don't work, because of the lack of HWA.
Don't know about swipe - I have never liked it, using SwiftKey X
Click to expand...
Click to collapse
I tried swiftkey.. its no different from the stock keyboard so I removed it
mx player stopped playing full length movies (it did in eclair). I'm guessing its the HWA problem here as well
Hope its fixed in an upcoming build
Sent from my MB525 using XDA
Swype beta works perfectly on my ICS defy. Did you performed all steps of swype installer?
I don't remember all steps now, but there was sg like choosing (checking box) swype, all settings and then choosing which android keyboard shall be used
corrinti said:
Swype beta works perfectly on my ICS defy. Did you performed all steps of swype installer?
I don't remember all steps now, but there was sg like choosing (checking box) swype, all settings and then choosing which android keyboard shall be used
Click to expand...
Click to collapse
I did a reinstall and that seems to have fixed the problem.. It's working now
(but I really hate the orange line -.- I preferred blue)
Sent from my MB525 using XDA
Xperia e help
To me it didnt tells nowhere ok
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
export PS1=""
[email protected]:/ $ export PS1=""
getprop ro.build.version.release > /data/local/tmp/output 2>&1
export TEMPRANDOM=44714
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
4.1.1
END:44714export PS1=""
getprop ro.product.manufacturer > /data/local/tmp/output 2>&1
export TEMPRANDOM=58917
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
Sony
END:58917export PS1=""
getprop ro.product.model > /data/local/tmp/output 2>&1
export TEMPRANDOM=62208
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
C1505
END:62208export PS1=""
getprop ro.build.version.incremental > /data/local/tmp/output 2>&1
export TEMPRANDOM=65498
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
20140510.194816
END:65498export PS1=""
ls -l /system/xbin/su > /data/local/tmp/output 2>&1
export TEMPRANDOM=39336
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/system/xbin/su: No such file or directory
END:39336export PS1=""
ls -l /system/bin/su > /data/local/tmp/output 2>&1
export TEMPRANDOM=64896
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/system/bin/su: No such file or directory
END:64896export PS1=""
chmod 755 /data/local/tmp/busybox > /data/local/tmp/output 2>&1
export TEMPRANDOM=74165
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:74165export PS1=""
/data/local/tmp/busybox whoami > /data/local/tmp/output 2>&1
export TEMPRANDOM=77455
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
whoami: unknown uid 2000
END:77455export PS1=""
rm /data/local/tmp/boomsh > /data/local/tmp/output 2>&1
export TEMPRANDOM=60562
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
rm failed for /data/local/tmp/boomsh, No such file or directory
END:60562export PS1=""
rm /data/local/tmp/sh > /data/local/tmp/output 2>&1
export TEMPRANDOM=84035
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
rm failed for /data/local/tmp/sh, No such file or directory
END:84035export PS1=""
chmod 700 /data/local/tmp/zergRush > /data/local/tmp/output 2>&1
export TEMPRANDOM=28422
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
Unable to chmod /data/local/tmp/zergRush: No such file or directory
END:28422export PS1=""
cd /data/local/tmp/ > /data/local/tmp/output 2>&1
export TEMPRANDOM=33800
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:33800export PS1=""
export TEMPRANDOM=86724;export PS1=END:$TEMPRANDOM;./zergRush
/system/bin/sh: ./zergRush: not found
END:86724export PS1=""
Related
Here are the details from under the battery:
Phone: Impulse 4G
Model: U8800-51
H/W: Ver.C
FCC ID:QISU8800-51
Here is the problem:
I attempted to root my phone using SuperOneClickv2.2-ShortFuse.
It said that it was successful.
Superuser lists several programs that have root access.
Using Root Explorer, I attempted to back up my wpa_supplicant file in /system/bin/.
It gives me an error "Warning- wpa_supplicant cannot be renamed because the file system is read-only."
I tap "OK", then i tap "Mount R/W" at the top of the screen, but it continues to say r/o and won't let me move/delete/rename/replace any files.
Any ideas?
I thought the file system might be on some kind of read-only media to prevent tampering, but that doesn't make sense because how would an OS update take when they finally release one? I'm not trying to flash my ROM. (yet) I am trying to modify a system file.
My apologies if this problem has already been posted. I searched for 2 or 3 hours last night, but I didn't find anything.
OK. Since no one can answer my problem with the current available data, i think it's time for new data.
I originally used Super One Click to root my phone (v 2.2) so I used that to "unroot" it. I then rooted it again using the same manner as the first time.
This time I copied the log.
Maybe someone can read this and see if I made a mistake?
Code:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
$
export TEMPRANDOM=57425;export PS1=END:$TEMPRANDOM;getprop ro.build.version.release
export PS1=""
$ 2.2.2
END:57425
export TEMPRANDOM=35075;export PS1=END:$TEMPRANDOM;getprop ro.product.manufacturer
export PS1=""
huawei
END:35075
export TEMPRANDOM=21770;export PS1=END:$TEMPRANDOM;getprop ro.product.model
export PS1=""
Huawei U8800-51
END:21770
export TEMPRANDOM=98464;export PS1=END:$TEMPRANDOM;getprop ro.build.version.incremental
export PS1=""
END:98464
export TEMPRANDOM=39561;export PS1=END:$TEMPRANDOM;ls -l /system/xbin/su
export PS1=""
/system/xbin/su: No such file or directory
END:39561
export TEMPRANDOM=34329;export PS1=END:$TEMPRANDOM;ls -l /system/bin/su
export PS1=""
/system/bin/su: No such file or directory
END:34329
export TEMPRANDOM=55555;export PS1=END:$TEMPRANDOM;chmod 755 /data/local/tmp/busybox
export PS1=""
END:55555
export TEMPRANDOM=18255;export PS1=END:$TEMPRANDOM;rm /data/local/tmp/boomsh
export PS1=""
END:18255
export TEMPRANDOM=53388;export PS1=END:$TEMPRANDOM;rm /data/local/tmp/sh
export PS1=""
END:53388
export TEMPRANDOM=66171;export PS1=END:$TEMPRANDOM;chmod 700 /data/local/tmp/zergRush
export PS1=""
END:66171
export TEMPRANDOM=98688;export PS1=END:$TEMPRANDOM;cd /data/local/tmp/
export PS1=""
END:98688
export TEMPRANDOM=68708;export PS1=END:$TEMPRANDOM;./zergRush
export PS1=""
[**] Zerg rush - Android 2.2/2.3 local root
[**] (C) 2011 Revolutionary. All rights reserved.
[**] Parts of code from Gingerbreak, (C) 2010-2011 The Android Exploid Crew.
[+] Found a Froyo ! 0x00016108
[*] Scooting ...
bugreport dir[/data/local/tmp] exist.
[*] Sending 149 zerglings ...
[+] Zerglings found a way to enter ! 0x10
[+] Overseer found a path ! 0x000160e8
bugreport dir[/data/local/tmp] exist.
[*] Sending 149 zerglings ...
[+] Zerglings caused crash (good news): 0x40121ce4 0x006c
[*] Researching Metabolic Boost ...
[+] Speedlings on the go ! 0xafd158c7 0xafd1aceb
[*] Sending 149 zerglings ...
[+] Rush did it ! It's a GG, man !
[+] Killing ADB and restarting as root... enjoy!
#
export TEMPRANDOM=62881;export PS1=END:$TEMPRANDOM;/data/local/tmp/busybox mount -o rw,remount /system
export PS1=""
# END:62881
export TEMPRANDOM=66317;export PS1=END:$TEMPRANDOM;mkdir /system/xbin
export PS1=""
mkdir failed for /system/xbin, File exists
END:66317
export TEMPRANDOM=35372;export PS1=END:$TEMPRANDOM;/data/local/tmp/busybox cat /data/local/tmp/2804643.tmp > /system/xbin/su
export PS1=""
END:35372
export TEMPRANDOM=90688;export PS1=END:$TEMPRANDOM;/data/local/tmp/busybox rm /data/local/tmp/2804643.tmp
export PS1=""
END:90688
export TEMPRANDOM=97790;export PS1=END:$TEMPRANDOM;chown 0:0 /system/xbin/su
export PS1=""
END:97790
export TEMPRANDOM=64751;export PS1=END:$TEMPRANDOM;chmod 6755 /system/xbin/su
export PS1=""
END:64751
export TEMPRANDOM=75361;export PS1=END:$TEMPRANDOM;/data/local/tmp/busybox cat /data/local/tmp/1907474.tmp > /system/app/Superuser.apk
export PS1=""
END:75361
export TEMPRANDOM=81042;export PS1=END:$TEMPRANDOM;/data/local/tmp/busybox rm /data/local/tmp/1907474.tmp
export PS1=""
END:81042
export TEMPRANDOM=58693;export PS1=END:$TEMPRANDOM;busybox true
export PS1=""
END:58693
export TEMPRANDOM=12349;export PS1=END:$TEMPRANDOM;/data/local/tmp/busybox mount -o ro,remount /system
export PS1=""
END:12349
Maybe try GingerBreak. It worked for me on the Froyo rom for the normal U8800, maybe it works for you too.
Blefish said:
Maybe try GingerBreak. It worked for me on the Froyo rom for the normal U8800, maybe it works for you too.
Click to expand...
Click to collapse
Thanks, I tried Gingerbreak, but couldn't even get it to do anything. I appreciate the suggestion, tho.
As I read from the debug code, I can see part of the code is from the GingerBreak, so it wouldn't work anyway. Another option is z4root, which didn't work for me, but it may work for you. I read that some of the earlier builds for U8800, some rooted their phones with it.
I'll try a different setting. Currently had it set on Auto for the exploit.
Thanks
Well, ZergRush made Root Explorer all chinese and wouldn't do anything.
psneuter made root explorer give me an error message in chinese, then it closed.
My problem was solved here...
http://forum.xda-developers.com/showpost.php?p=19846498&postcount=170
Possibly... Root Explorer is still in Chinese. Looking onto fixing that now.
Try using Z4Root. I rooted my U8800-51(AT&T Impulse 4G) using Z4Root and it worked without a problem.
I've been ditzing with a buddies phone for almost 3 hours now using every method I can think of to get this thing to root and theyre all failing. Short synopsis on each:
Pete's moto tools 1.07: fails on final step but log shows "permission denied" on each step
1-2-3 method: fails after running ./rageagainstthecage-arm5.bin by closing (or crashing) adb interface. have to reboot the computer to get any devices at all and it shows as "offline"
rageagainsttecage ON THE PHONE USING TERMINAL: crashes after ./rage*.bin, cannot re-open terminal without force-close unless I uninstall terminal and reinstall, and I'm back to square 1
z4root: fails, no idea why, crashes similarly to above method. phone must be rebooted or z4root reinstalled to be able to run again without FC
I'm about to try superoneclick but I'm not optimistic. Any ideas?
Droid 2
Gingerbread 2.3.4
Sys ver.: 4.5.621.A955.Verizon.en.US
BaseBand:BP_C_01.09.15P
Build#: 4.5.1_57DR4-51
-pyr0ball
SuperOneClick hug on zerg rush method.
phone's on and phone thinks it's got ADB active, but SOC isnt seeing it.
log dump:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
export PS1=""
$ export PS1=""
getprop ro.build.version.release > /data/local/tmp/output 2>&1
export TEMPRANDOM=97413
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
2.3.4
END:97413export PS1=""
getprop ro.product.manufacturer > /data/local/tmp/output 2>&1
export TEMPRANDOM=23038
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
motorola
END:23038export PS1=""
getprop ro.product.model > /data/local/tmp/output 2>&1
export TEMPRANDOM=51743
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
DROID2
END:51743export PS1=""
getprop ro.build.version.incremental > /data/local/tmp/output 2>&1
export TEMPRANDOM=84484
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
120117
END:84484export PS1=""
ls -l /system/xbin/su > /data/local/tmp/output 2>&1
export TEMPRANDOM=36720
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/system/xbin/su: No such file or directory
END:36720export PS1=""
ls -l /system/bin/su > /data/local/tmp/output 2>&1
export TEMPRANDOM=74165
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/system/bin/su: No such file or directory
END:74165export PS1=""
chmod 755 /data/local/tmp/busybox > /data/local/tmp/output 2>&1
export TEMPRANDOM=25357
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:25357export PS1=""
/data/local/tmp/busybox whoami > /data/local/tmp/output 2>&1
export TEMPRANDOM=44793
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
whoami: unknown uid 2000
END:44793export PS1=""
ls -l /data/local/12m > /data/local/tmp/output 2>&1
export TEMPRANDOM=95768
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
drwxrwx--x mot_tcmd shell 2011-09-03 20:52 batch
END:95768export PS1=""
mv /data/local/12m /data/local/12m.bak > /data/local/tmp/output 2>&1
export TEMPRANDOM=76259
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:76259export PS1=""
ln -s /data /data/local/12m > /data/local/tmp/output 2>&1
export TEMPRANDOM=21842
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:21842export PS1=""
$ export PS1=""
ls -l /data/local/12m > /data/local/tmp/output 2>&1
export TEMPRANDOM=42924
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
lrwxrwxrwx shell shell 2012-05-14 16:47 12m -> /data
END:42924export PS1=""
rm /data/local/12m > /data/local/tmp/output 2>&1
export TEMPRANDOM=51968
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
export TEMPRANDOM=51968
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:51968export PS1=""
mv /data/local/12m.bak /data/local/12m > /data/local/tmp/output 2>&1
export TEMPRANDOM=71998
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:71998export PS1=""
mv /data/local.prop /data/local.prop.bak > /data/local/tmp/output 2>&1
export TEMPRANDOM=49127
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
failed on '/data/local.prop' - Permission denied
END:49127export PS1=""
rm /data/local/tmp/boomsh > /data/local/tmp/output 2>&1
export TEMPRANDOM=76636
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
rm failed for /data/local/tmp/boomsh, No such file or directory
END:76636export PS1=""
rm /data/local/tmp/sh > /data/local/tmp/output 2>&1
export TEMPRANDOM=60635
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
rm failed for /data/local/tmp/sh, No such file or directory
END:60635export PS1=""
chmod 700 /data/local/tmp/zergRush > /data/local/tmp/output 2>&1
export TEMPRANDOM=94275
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:94275export PS1=""
cd /data/local/tmp/ > /data/local/tmp/output 2>&1
export TEMPRANDOM=17284
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:17284export PS1=""
export TEMPRANDOM=23415;export PS1=END:$TEMPRANDOM;./zergRush
[**] Zerg rush - Android 2.2/2.3 local root
[**] (C) 2011 Revolutionary. All rights reserved.
[**] Parts of code from Gingerbreak, (C) 2010-2011 The Android Exploid Crew.
[+] Found a GingerBread ! 0x00000118
[*] Scooting ...
[*] Sending 149 zerglings ...
[*] Sending 189 zerglings ...
[-] Hellions with BLUE flames !
END:23415export PS1=""
export PS1=""
/data/local/tmp/busybox mount -o rw,remount /system > /data/local/tmp/output 2>&1
export TEMPRANDOM=84557
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
mount: permission denied (are you root?)
END:84557export PS1=""
/data/local/tmp/busybox mount > /data/local/tmp/output 2>&1
export TEMPRANDOM=86651
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
rootfs on / type rootfs (ro,relatime)
tmpfs on /dev type tmpfs (rw,relatime,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
none on /acct type cgroup (rw,relatime,cpuacct)
tmpfs on /mnt/asec type tmpfs (rw,relatime,mode=755,gid=1000)
tmpfs on /mnt/obb type tmpfs (rw,relatime,mode=755,gid=1000)
none on /dev/cpuctl type cgroup (rw,relatime,cpu)
/dev/block/mmcblk1p21 on /system type ext3 (ro,noatime,nodiratime,barrier=1,data=ordered)
/dev/block/userdata on /data type ext3 (rw,nosuid,nodev,noatime,nodiratime,errors=continue,barrier=1,data=ordered)
/dev/block/cache on /cache type ext3 (rw,nosuid,nodev,noatime,nodiratime,errors=continue,barrier=1,data=ordered)
tmpfs on /data/tmp type tmpfs (rw,relatime,size=2048k)
/dev/block/pds on /pds type ext3 (rw,nosuid,nodev,noatime,nodiratime,errors=continue,barrier=1,data=ordered)
/dev/block/preinstall on /preinstall type ext3 (rw,nosuid,nodev,noatime,nodiratime,barrier=1,data=ordered)
/dev/block/vold/179:1 on /mnt/sdcard type vfat (rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)
/dev/block/vold/179:1 on /mnt/secure/asec type vfat (rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)
tmpfs on /mnt/sdcard/.android_secure type tmpfs (ro,relatime,size=0k,mode=000)
/mnt/sdcard on /mnt/sdcard type ecryptfs (rw,dirsync,nosuid,nodev,noexec,relatime,ecryptfs_sig=9d248994b69b6392,ecryptfs_cipher=aes,ecryptfs_key_bytes=32,ecryptfs_passthrough,no_new_encrypted)
END:86651
You cannot root 2.3.4 sorry
Sent from my Droid Incredible using xda premium
no solution at all anymore? :[
I could swear the Pete's latest version said it would work on 2.3.4
what about using an SBF to earlier firmware and then root?
Nope. If you sbf the phone will be bricked.
Sent from my Droid Incredible using xda premium
So I'm bricked ..won't show up: n RSS lite or anything says can't program batt. Low how do I revive it
Sent from my PC36100 using XDA
robo4130 said:
So I'm bricked ..won't show up: n RSS lite or anything says can't program batt. Low how do I revive it
Sent from my PC36100 using XDA
Click to expand...
Click to collapse
Without a different charged battery or a factory cable you are screwed sorry.
Sent from my Incredible using xda premium
Have a charged batt and it is a factory cable and it still says that
Sent from my PC36100 using XDA
Fully charged?
Sent from my Incredible using xda premium
Yes fully charged I have 4 batts that are
Sent from my PC36100 using XDA
Make sure you have all windows drivers installed
Sent from my Incredible using xda premium
OK so any ideas or no....
Sent from my PC36100 using XDA
Buy a factory cable from team black hat
Sent from my Incredible using xda premium
Ill just take that as u don't know thanks
Sent from my PC36100 using XDA
robo4130 said:
Ill just take that as u don't know thanks
Sent from my PC36100 using XDA
Click to expand...
Click to collapse
Dude you're screwed without one...as a dev I do know.
Sent from my Droid Incredible using xda premium
ive done all the same and had all the same issues. cannot root.
REALLY WISH I HAD LOOKED ONLINE BEFORE CLICKING UPDATE. FACK!!!!
would/could it work?
I've been reading on-line and apparently the Droid X also runs .621, I found a few references to a linux sbf that turns the phone into a .621 version of the Milestone X and can be rooted then flashed to a custom rom.. is there any chance that a similar work-around would work on the Droid 2?
rootzwiki.com/topic/20835-621-rootable-sbf-apparently-found/
Droid X also runs .621
Click to expand...
Click to collapse
that's was moto being lazy naming files, but they are different files/firmware
Crap. Thanks anyways. I hope they figure out root soon...
Sent from my DROID2 using XDA
Old thread but I just read it and it shouldn't be in development section moving to General.
I have htc magic 32B T mobile , i know its very old phone but i can only afford it so please help me about some questions:
I almost bricked my phone because i dont know much about Custom roms but happily i was successfull to make it working again by "RUU_Sapphire_T-Mobile_US_3.12.531.1_FRG83D_release_signed_4" that i downloaded from some site but now when was checking the features i was unable to get back into recovery mod, i mean restart phone and press and hold Power button+Home , instead of recovery mode it gives me a big exclaimation sign with android picture.
I googled alot for it but didnt find any correct result.
If this mode is not showing then it means i am unable to load custom rom or etc.
and the second thing please tell me what is stable rom available here that have android version 2.3.5 or high and also please give me a very basic tutorial about installing it.
Third and last question: when i try to root phone with SuperOneClick , it gives me error like this
------------------------------------------------------------------------------------------------
"* daemon not running. starting it now on port 5037 *
* daemon started successfully *
export PS1=""
$ getprop ro.build.version.release > /data/local/tmp/output 2>&1
export TEMPRANDOM=91731
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
2.2.3
END:91731export PS1=""
getprop ro.product.manufacturer > /data/local/tmp/output 2>&1
export TEMPRANDOM=96442
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
HTC
END:96442export PS1=""
getprop ro.product.model > /data/local/tmp/output 2>&1
export TEMPRANDOM=36568
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
T-Mobile myTouch 3G
END:36568export PS1=""
getprop ro.build.version.incremental > /data/local/tmp/output 2>&1
export TEMPRANDOM=98985
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
198089
END:98985export PS1=""
ls -l /system/xbin/su > /data/local/tmp/output 2>&1
export TEMPRANDOM=28422
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/system/xbin/su: No such file or directory
END:28422export PS1=""
ls -l /system/bin/su > /data/local/tmp/output 2>&1
export TEMPRANDOM=52562
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/system/bin/su: No such file or directory
END:52562export PS1=""
chmod 755 /data/local/tmp/busybox > /data/local/tmp/output 2>&1
export TEMPRANDOM=18103
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:18103export PS1=""
/data/local/tmp/busybox whoami > /data/local/tmp/output 2>&1
export TEMPRANDOM=80520
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
whoami: unknown uid 2000
END:80520export PS1=""
chmod 700 /data/local/tmp/psneuter > /data/local/tmp/output 2>&1
export TEMPRANDOM=12798
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
Unable to chmod /data/local/tmp/psneuter: No such file or directory
END:12798export PS1=""
cd /data/local/tmp/ > /data/local/tmp/output 2>&1
export TEMPRANDOM=92782
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:92782export PS1=""
export TEMPRANDOM=65200;export PS1=END:$TEMPRANDOM;./psneuter
export PS1=
./psneuter: not found
END:65200"
------------------------------------------------------------------------------------------------
Please reply me because i am going to throw this phone away if i got no reply because here you have to pay a huge amount of money to flash any mobile even discontinued ones.
So please i m waiting for the replies of my seniors here.
Thanks in advance..... And please apologize for my Bad English.
Please somebody atleast reply my question?
Anyone know if its possible to root any of the cdma defy xt's? xt555c is on Straight Talk running off of Sprint
Sent from my ThunderBolt using Tapatalk 2
WalkerGFX said:
Anyone know if its possible to root any of the cdma defy xt's? xt555c is on Straight Talk running off of Sprint
Sent from my ThunderBolt using Tapatalk 2
Click to expand...
Click to collapse
i would like to know of a way to root mine also i just bought one lol
Please ask all questions in the Q&A section. Thread moved there.
Also interested
I've tried everything for my defy xt555c straight talk phone running 2.3.7. through research i've found that the phone requires a patch to be a applied for the root to work.. however when using SUT it requires my phones SPC code. This is my current issue, i've tried calculators that apply a special algorithm to the ESN which produces the six digit code. I've tried ##data# then logcat to get the spc(although i think this is for msl?(msl might be same as spc?)) I've tried superoneclick and it gets to step 7 and locks up. All of the programs i've used either lock or or can't get permission..
I guess the real question is does anyone know how to accurately acquire the SPC code for the defyxt555c? any help would be greatly appreciated.
THANX!
BUMP- any information would be super greatly appreciated.
So turns out the spc and msl codes are not the same. The spc is a one time use used to program the phone. The msl is the code used to reprogram and this is the code i require.
Sent from my XT555C using xda app-developers app
ilikeroot said:
So turns out the spc and msl codes are not the same. The spc is a one time use used to program the phone. The msl is the code used to reprogram and this is the code i require.
Sent from my XT555C using xda app-developers app
Click to expand...
Click to collapse
How did you discover the SPC and MSL are different?
I have the Republic Wireless Defy XT 557, which I believe is quite similar to your device. Have been unable to obtain SPC/MSL.
I found it through google i will have to check my history.. as for your spc you can find calculators online and there is actually an app in the market that will do the same thing. Its called meid converter.. it will give you the spc.. but not the msl.. ive tested it on my other phone and its msl was diff than the spc. I havnt found a way to get the msl yet though.. i have been looking for a while.
My other phone is a galaxy precedent which i was able to get the msl using the alogcat method. That doesnt work with the motorola though.
Sent from my XT555C using xda app-developers app
My xt 555c is the first android I've owned, and I mistakenly thought so little on-board memory wouldn't be an issue since I could slap a large micro SD in it....
I'm running into the same problem as the rest. SuperOneClick, etc... don't work on the XT 555c. Something's missing. Not sure if it helps, but here's the log I get from SuperOneClick. I've noticed for many people it hangs on step 7. For me it stops at step 3.
Code:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
$ export PS1=""
getprop ro.build.version.release > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=26625
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:26625export PS1=""
getprop ro.product.manufacturer > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=43967
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:43967export PS1=""
getprop ro.product.model > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=76709
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:76709export PS1=""
getprop ro.build.version.incremental > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=31560
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:31560export PS1=""
ls -l /system/xbin/su > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=80448
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:80448export PS1=""
ls -l /system/bin/su > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=27227
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:27227export PS1=""
chmod 755 /data/local/tmp/busybox > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=65795
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:65795export PS1=""
/data/local/tmp/busybox whoami > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=13994
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:13994export PS1=""
chmod 700 /data/local/tmp/psneuter > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=35300
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:35300export PS1=""
cd /data/local/tmp/ > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=82238
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:82238export PS1=""
export TEMPRANDOM=69382;export PS1=END:$TEMPRANDOM;./psneuter
./psneuter: not found
END:69382export PS1=""
98cafe said:
My xt 555c is the first android I've owned, and I mistakenly thought so little on-board memory wouldn't be an issue since I could slap a large micro SD in it....
I'm running into the same problem as the rest. SuperOneClick, etc... don't work on the XT 555c. Something's missing. Not sure if it helps, but here's the log I get from SuperOneClick. I've noticed for many people it hangs on step 7. For me it stops at step 3.
Code:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
$ export PS1=""
getprop ro.build.version.release > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=26625
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:26625export PS1=""
getprop ro.product.manufacturer > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=43967
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:43967export PS1=""
getprop ro.product.model > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=76709
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:76709export PS1=""
getprop ro.build.version.incremental > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=31560
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:31560export PS1=""
ls -l /system/xbin/su > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=80448
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:80448export PS1=""
ls -l /system/bin/su > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=27227
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:27227export PS1=""
chmod 755 /data/local/tmp/busybox > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=65795
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:65795export PS1=""
/data/local/tmp/busybox whoami > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=13994
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:13994export PS1=""
chmod 700 /data/local/tmp/psneuter > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=35300
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:35300export PS1=""
cd /data/local/tmp/ > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=82238
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:82238export PS1=""
export TEMPRANDOM=69382;export PS1=END:$TEMPRANDOM;./psneuter
./psneuter: not found
END:69382export PS1=""
[/QUO
ive been at this since the first of October when i first got my defyxt555c.. i've had no luck trying to root this phone.. i've found multiple ways including flashing, patching, and fake rooting.. its like no one has ever heard about this phone.. The phone itself is awesome,, but its just not worth it if it cant be rooted... lawd lawd i hope it happens soon
Click to expand...
Click to collapse
I've now gotten the run-around from Motorola and straight talk. Basically the official stance is "if you were stupid enough to buy a phone with so little space, you're SOL."
It's a shame because aside from the idiotic lack of space (what engineer designed THAT?!?), it's a great phone. As it is though, it's useless to me if I can't increase the space by rooting it. Any suggestions on another decent phone that I can get?
98cafe said:
I've now gotten the run-around from Motorola and straight talk. Basically the official stance is "if you were stupid enough to buy a phone with so little space, you're SOL."
It's a shame because aside from the idiotic lack of space (what engineer designed THAT?!?), it's a great phone. As it is though, it's useless to me if I can't increase the space by rooting it. Any suggestions on another decent phone that I can get?
Click to expand...
Click to collapse
Did you tell them that you were trying to root?
I explained that I was happy with the service, but needed to be able to modify the phone so as to extend the internal memory. The reply I got was that they don't even have the MSL because they never under any circumstances unlock the phones.
I know that no one has been able to successfully root the phone (or if they have, they are being quiet...curse them ), but has anyone successfully flashed to another OS, like Cyanogen?
98cafe said:
I explained that I was happy with the service, but needed to be able to modify the phone so as to extend the internal memory. The reply I got was that they don't even have the MSL because they never under any circumstances unlock the phones.
Click to expand...
Click to collapse
There has to be something that can be done... i need to find one of these people who do this kind of thing and offer them money for a working option or something. The MSL is made by the service provider i am pretty sure. They take the meid and use their specific algorithm to produce the MSL this is my understanding anyways.
ilikeroot said:
There has to be something that can be done... i need to find one of these people who do this kind of thing and offer them money for a working option or something. The MSL is made by the service provider i am pretty sure. They take the meid and use their specific algorithm to produce the MSL this is my understanding anyways.
Click to expand...
Click to collapse
hmm.....maybe we can start trolling linkedin for people in Straight talk (or tracfone)'s Engineering dept?
root
ilikeroot said:
98cafe said:
My xt 555c is the first android I've owned, and I mistakenly thought so little on-board memory wouldn't be an issue since I could slap a large micro SD in it....
I'm running into the same problem as the rest. SuperOneClick, etc... don't work on the XT 555c. Something's missing. Not sure if it helps, but here's the log I get from SuperOneClick. I've noticed for many people it hangs on step 7. For me it stops at step 3.
Code:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
$ export PS1=""
getprop ro.build.version.release > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=26625
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:26625export PS1=""
getprop ro.product.manufacturer > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=43967
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:43967export PS1=""
getprop ro.product.model > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=76709
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:76709export PS1=""
getprop ro.build.version.incremental > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=31560
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:31560export PS1=""
ls -l /system/xbin/su > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=80448
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:80448export PS1=""
ls -l /system/bin/su > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=27227
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:27227export PS1=""
chmod 755 /data/local/tmp/busybox > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=65795
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:65795export PS1=""
/data/local/tmp/busybox whoami > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=13994
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:13994export PS1=""
chmod 700 /data/local/tmp/psneuter > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=35300
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:35300export PS1=""
cd /data/local/tmp/ > /data/local/tmp/output 2>&1
cannot create /data/local/tmp/output: permission denied
export TEMPRANDOM=82238
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/output: No such file or directory
END:82238export PS1=""
export TEMPRANDOM=69382;export PS1=END:$TEMPRANDOM;./psneuter
./psneuter: not found
END:69382export PS1=""
[/QUO
ive been at this since the first of October when i first got my defyxt555c.. i've had no luck trying to root this phone.. i've found multiple ways including flashing, patching, and fake rooting.. its like no one has ever heard about this phone.. The phone itself is awesome,, but its just not worth it if it cant be rooted... lawd lawd i hope it happens soon
Click to expand...
Click to collapse
there is now a root for the defy xt556/557 on a republic wireless thread that works. I rooted my uscc defy xt556 with the bootloader locked. it should also work on the xt555c.
Click to expand...
Click to collapse
I will try to find it tomorrow and report back
Sent from my XT555C using xda app-developers app
UPDATE: why didn't you post a link?
[email protected] said:
ilikeroot said:
there is now a root for the defy xt556/557 on a republic wireless thread that works. I rooted my uscc defy xt556 with the bootloader locked. it should also work on the xt555c.
Click to expand...
Click to collapse
WE NEED A LINK!!!!!
Click to expand...
Click to collapse
Here's a link to the thread, and a link to the instructions from that thread.
Will someone try it out on the Net10 version and report back? I've bought the phone, but don't want it if it can't be rooted, so I don't want to open it and risk not being able to return it.
Thanks!
It wooooorked
I can now say my Motorla DEFY XT555c is rooted.. awesome!!!!!! just need to follow the directions in the link and you're good(for this phone anyways: Straight Talk Motorola DEFY XT555C):cyclops:
http://www.androidpolice.com/2012/12/05/exclusive-how-to-root-republic-wireless-motorola-defy-xt/
Hello, I recently got a Motorola droid pro (Android 2.3.4) and I'm looking to root it to remove some of the bloatware on it and stuff like that. I tried using SuperOneClick but it stalls on the step:
Shell rooting device...-Step #7 WaitForDevice
With the detail text being:
mount -o rw,remount /dev/block/mmcblk1p21 /system > /data/local/tmp/output 2>&1
export TEMPRANDOM=50620
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
mount: Operation not permitted
END:50620
I installed the most up to date drivers via pdanet and ran SuperOneClick as an admin. Anybody know why it stalls here? Also if there's a better way to root this device I'm up for trying that. Thanks in advance for any help. ^_^
Found something that worked. This tool worked for me using the Gimli exploit.