Hello,
I have bought a Zephyr HxM bluethoot Heart Rate monitor to use it with the Endomondo software, but I'm not able to make it work...
I'm just able to pair the Zephyr HxM HR monitor with my HD2, but the Endomondo software is not able to connect with it.
The device is paired but not connected...
I have tried to wet the sensors on the chestband but it doesn't work neither...
I'm using the built mattc Leo EVO 1.0.1 + Hastarin kernel R8 and Radio 2.14
Has anyone here been able to make it work?
can you pair and conect with any other bluetooth device? it sounds to me like a bluetooth issue with the build you are useing.
My Car hansfree Parrot works fine with that build.
Hello everyone,
is there anyone who uses his/hers defy to do some running training.
For example using the defy with a bluetooth heart rate monitor.
For the moment i'm using jogtracker app, but i don't know which hrm to buy
thank you
Bart
bartdm said:
Hello everyone,
is there anyone who uses his/hers defy to do some running training.
For example using the defy with a bluetooth heart rate monitor.
For the moment i'm using jogtracker app, but i don't know which hrm to buy
thank you
Bart
Click to expand...
Click to collapse
I am using "Sportstracklive" for a long time. "Endomondo" and "Sports Tracker" work too. The heart rate sensor I use(d) is(was) "Polar WearLink+ transmitter with Bluetooth". The problem with it is very poor battery life of the sensor many (all?) users get. This seems to be fundamental to a bluetooth hardware like that. See this thread for details: forum.polar.fi, "Problems with Polar WearLink+ transmitter with Bluetooth" (can't post links yet). I would avoid BT sensors in the future and will get ANT+ sensor (industry standard) and a capable phone (Sony has some).
I think the problem with the "Polar Wearlink+ with Bluetooth" is that it's not using low energy Bluetooth, which Wahoo Blue HR does. The only problem is I'm not sure Defy will be able to connect to it (i.e. does Defy support Bluetooth 4.0 Low energy?).
HI All,
My Nexus 4 was ota to 4.3 last night. This morning I have been trying to get my H7 to pair via bluetooth, given that both the Nexus 4 and H7 support Bluetooth Smart.
Has anyone managed to pair their H7's over bluetooth? If so what did you do and which app did you use.
I think that the H7 is working as it's sending a t31 signal to my polar f6 watch, so i'm assuming that the bluetooth is also switched on, however I no way to verify this, as i don't have another bluetooth smart receiver to check it with.
Thanks
Satpal
Polar H7 can get paired with android 4.3
schander said:
HI All,
My Nexus 4 was ota to 4.3 last night. This morning I have been trying to get my H7 to pair via bluetooth, given that both the Nexus 4 and H7 support Bluetooth Smart.
Has anyone managed to pair their H7's over bluetooth? If so what did you do and which app did you use.
I think that the H7 is working as it's sending a t31 signal to my polar f6 watch, so i'm assuming that the bluetooth is also switched on, however I no way to verify this, as i don't have another bluetooth smart receiver to check it with.
Thanks
Satpal
Click to expand...
Click to collapse
I just have tried it also without success. But just take the battery of the H7 short out and you will be able after inserting the battery to get paired. So hardware works fine now, but apps aren´t working yet: edemondo pro, runtastic pro. Does somebody have already an app that works?
Same here. I was able to pair after removing the H7 battery and inserting again but is not showing my heart rate.
Sent from my Nexus 4 using xda app-developers app
Same here!
My N4 is able to pair with the H7, but apps don't show my heart rate..
Hi,
I also tried this and my Nexus 4 was unable to find the H& in the BT pairing menu.
I realised yesterday that my wifes S3 also support BT smart, via smasungs own bt stack. I tried to pair via the normal BT menu but failed. However I download an app called NRF (by Nordic Semi) and managed to pair the device directly from there, so atleast i know that my H7 works. I guess it just matter of time before support is introduced by the various apps.
I wonder if manufacturers like Samsung will provide wrappers for the own BT Smart api's to conform with the Android API v18 (the one with BT Smart)
Thanks
Satpal
HI
i tried yesteday to connect the Polar H6 to the Nexus4 using Runtastic app. Didn´t had success i tried to reboot the phone and also released the battery of the polar sensor.
Do you know if there´s other software which i can use to pair them? Or how bluetoot smart pairing works in general?
I am also unable to pair my Bluetooth Smart heart rate monitor to my Nexus 4.
I am using a 60beat Blue and the device is not detected in either the Bluetooth settings menu or the Runtastic PRO V4.0 App.
When I try and connect to a app 'nRF HRM Demo' (the app 60beat support directed me too to test if the device worked) I get a message pop up "Bluetooth Low Energy isn't supported by your phone " Could other users try this app and let me know if they get the same message before I reply to 60beat?
I am running Android 4.3 (stock factory image and I am not rooted) JWR66V
I am waiting for a reply from Runtastic support to see if this device is compatible with their APP.
I do know my heart rate monitor uses the Transmission frequency of 2.4 GHz maybe this is the problem.
I will reply again once I receive a response from Runtastic as I requested a list of compatible hardware.
It does seem strange that I am unable to find much information about this new feature and how to test it.
FIngers crossed we will be able to definitive rundown of what works and does not work on both the Nexus 4 and Android 4.3
After having no luck getting a response out of Runtastic I have finally found an App in the store that reads my 60beat cheststrap (released today);
I am unable to post a link to the Play store but search for BLE Heart Rate Monitor
My device still does not show up in the setting menu but at least I know that 4.3 is working with BLE and it's Runtastic's fault that my monitor does not pair with it's APP.
I will reply again once I hear back from Runtastic with there response to this issue.
Let me know if anyone finds any other apps that work with their devices.
Dichdude said:
After having no luck getting a response out of Runtastic I have finally found an App in the store that reads my 60beat cheststrap (released today);
I am unable to post a link to the Play store but search for BLE Heart Rate Monitor
My device still does not show up in the setting menu but at least I know that 4.3 is working with BLE and it's Runtastic's fault that my monitor does not pair with it's APP.
I will reply again once I hear back from Runtastic with there response to this issue.
Let me know if anyone finds any other apps that work with their devices.
Click to expand...
Click to collapse
Thanks for that Info with BLE
Will try it also and report if its also working for me
Sirbubu said:
Thanks for that Info with BLE
Will try it also and report if its also working for me
Click to expand...
Click to collapse
Tested it out BLE is also working for me so its really a Runtastic issue.
I will also write them.
Sirbubu said:
Tested it out BLE is also working for me so its really a Runtastic issue.
I will also write them.
Click to expand...
Click to collapse
Got a response from Runtastic via Twitter;
"@Runtastic Why do you lock out the use of other BLE HRM from you Android Platform, I thought the point of BLE was for easy implementation?
@Dichdude From now we don't offer support for third-party hardware anymore. Thanks for understanding."
To sum it up Runtastic will only work with there own BLE heart rate monitor. I did reply asking them why and that it looks like a money grab but they have not responded to that question (suprise), so it looks like we will have to wait for other Dev's to implement Smart BT.
We just have to wait for developers to update their apps to be able to make use of BLE. The internal libraries don't yet support that protocol even though the phone does. I'm sure it won't be that long until apps updates start rolling out for the more popular apps. Unfortunetly there is only the one app (BLE HRM that a few have mentioned) that works. Considering 4.3 was released/announced less then 2 weeks ago, we should give the developers some time to get that update out before we start to fully complain.
Sirbubu said:
Tested it out BLE is also working for me so its really a Runtastic issue.
I will also write them.
Click to expand...
Click to collapse
I got an H7 today and downloaded BLE Heart Monitor. As soon as I started scanning I got it in the list of devices. I was able to connect and it seemed pretty accurate. However, I'm not able to connect again and it's not even detected as a device. I tried taking out the battery, re-booting the phone but nothing seems to work. Anything else I can try to get this to connect again with my Nexus 4?
Runtastic says they will only support their Runtastic-branded Bluetooth Smart HRM chest strap. I'm still waiting on Endomondo & RunKeeper to respond to my inquiries. The best thing to do is keep hounding them.
Confirmed working Polar h7 - at least in a basic app that was just updated today.
Sent from my Nexus 4 using Tapatalk 2
jawz101 said:
Confirmed working Polar h7 - at least in a basic app that was just updated today.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Just wondering, can you pair the h7 every time? I can do it once, get to the heart rate screen, see my heart rate but if I close the app it will no longer pair with the H7. It will show it in the list of devices but will hang on the "Connecting" screen. After this I have to clear the data for the app and take out the battery of the H7 to get them to pair again.
Sent from my Nexus 4 using xda app-developers app
I'll check when I get back home.
I tested for a little while tonight. Doesn't seem to handle a reboot nor temporary disconnection. I'd hope it would reconnect if I toggle the Bluetooth radio for a moment. In the event of temporary loss of signal I had to stop the app in android settings and once I restarted the app it would recognize the monitor once more.
My concern with all of that is my phone could reboot for whatever reason mid-run and I'd have to mess with whatever running app again. I'm usually listening to Stitcher radio and using whatever running app in places where phone signal isn't always great. That combination seems to cause my phone to restart on rare occasion which already annoys me so I'd expect reliability.
So I confirmed that turning Bluetooth off and on will resolve the connection issue, it's able to re-connect everytime. I did a ride today running both BLE Heart Monitor and RunKeeper and I had a stable connection throughout. At the end I just entered the average heart rate in RunKeeper. I really wish RunKeeper would release an update already or at least provide an ETA!
You're saying runkeeper saw it? Nm. I just read it
Hi,
I have been searching around the interwebs for a 4.3 ROM for jfltexx, but i can't seem to find any that lets me create application for LE. I have tried the latest cyanogenmod and slimbean ROMs (failes the hasSystemFeature check), and also looked around for any mentions on this subject. From what i have found i can't see that anyone has confirmed BLE support on their ROM. I might have missed something though, so does anyone know how i can BLE functioning on my Galaxy 4?
Much appreciated, Henrik
henfos said:
Hi,
I have been searching around the interwebs for a 4.3 ROM for jfltexx, but i can't seem to find any that lets me create application for LE. I have tried the latest cyanogenmod and slimbean ROMs (failes the hasSystemFeature check), and also looked around for any mentions on this subject. From what i have found i can't see that anyone has confirmed BLE support on their ROM. I might have missed something though, so does anyone know how i can BLE functioning on my Galaxy 4?
Much appreciated, Henrik
Click to expand...
Click to collapse
Edit:
Forgot to say that i can detect BLE devices with the bluetooth scan in settings, and pair with them. Only application fail the BLE check.
henfos said:
Edit:
Forgot to say that i can detect BLE devices with the bluetooth scan in settings, and pair with them. Only application fail the BLE check.
Click to expand...
Click to collapse
For me, it's even worse. BT LE devices can not be detected with my i9500.
As far as I learned, Android failed to deliver proper BT-stacks. Not sure if any developer cares about this. I didnt see any development in any forum
With "BLE Heart Rate Monitor" from play store, I can connect my heartrate belt with BT LE. But my fitness apps can not connect with it. It seems that they use the improper original Android BT-stack (afaik)
Hi all,
Mabe you know Garmin Fenix outdoor GPS watch. It has Bluetooth 4 LE. In latest firmware 4.40, its posiible to use this watch like smartwatch (notifications etc). The only one problem is that it works only with Iphone. But i realized i can normally with no problems connect from my LG G2 kitkat android.
My question is, does anybody know, if its possible to make app for managing this smartwatch functions with andoid? I would like to code this app, but if here is anybody more experienced than me, please tell me if its possible or it isnt. Or maybe some hints where to start.
My idea is that if i have paired device, i can normally use android bluetooth api.
tomsi91 said:
Hi all,
Mabe you know Garmin Fenix outdoor GPS watch. It has Bluetooth 4 LE. In latest firmware 4.40, its posiible to use this watch like smartwatch (notifications etc). The only one problem is that it works only with Iphone. But i realized i can normally with no problems connect from my LG G2 kitkat android.
My question is, does anybody know, if its possible to make app for managing this smartwatch functions with andoid? I would like to code this app, but if here is anybody more experienced than me, please tell me if its possible or it isnt. Or maybe some hints where to start.
My idea is that if i have paired device, i can normally use android bluetooth api.
Click to expand...
Click to collapse
This is not relevant to Android Wear. Please consider moving the post to the general forums, or forums specific to this watch. I suspect you will have better success there.