I have a focus flash Mi7Rom
I would like to know if anyone has the same issue.
In Vibrate mode, when you are listening music with a headphone and someone call you, the music will not fade out. You can feel the vibration but no ringtone being played.
In Ring+vibrate mode, under the same situation, music will fade out and ringtone is playing from both headphone and the phone speaker.
Is there anyway to change the setting in vibrate mode where music will fade out with ringtone play when call is coming?
If my phone is in my jacket and someone call me when I was listening music, i would missed that call.
Same things apply to SMS. No notification sound in vibrate mode.
I'm not sure why you think this is a problem. The phone is not supposed to play audio notifications in vibrate mode. If you want the phone to play audio notifications or "ring" then use the ring + vibrate mode. As you mentioned in your post that mode does exactly what you need.
Also, as of now WP7 does not have a mode which plays back audio notifications only through the line out and not through the phone speaker.
Many times I have my phone is in my jacket that I couldn't feel the vibration
If the phone would fade out the music and play my ringtone, then I could have answered those missed calls.
coming from IOS, it's kinda inconvenient.
Related
Anyone have a problem like this:
I did a had reset but it still is doing this-
The speaker plays my ringtones out loud even when my headphones are plugged in!!
Thanks,
Daniel
Mine has always been like that, whicever ROM I used.
Really????
My old XDA never did this...
So if i'm listening to music I run the risk of having my ringtone play out loud??
Is the only solution to change my ring prefrences to vibrate only when i'm listening to music (since the phone volume itself cannot be muted)??
When I preview the sound it doesnt play out loud
I don't have such problem with original headset. But, if I use bluetooth headset it happens.
So this is not normal....
How do I fix it?
I tried a hard reset- didn't work!!
Playing the ringtone out of the speaker even though the headphones are in is normal with most if not all phones. The headphones are only to listen to music and calls.
If you had the phones in but not in your ears and the phone rang only in the headphones how would you hear it?
Why would your headphones be plugged in if you are not listening to music?? And to answer your question- you would know the phone is riging by it vibrating.
Anyways- many people told me this is not normal...so there must be a way to change it.
Also, when I am in silent or vibrate mode and I accidentaly or even purposely push my Voice Command button the beep sound will come out of the speaker-
It will change the sound icon from Vibrate or Silent to the regular icon but will stay in silent/vibrate mode-
Is this normal??
-Daniel
Not sure about the voice command question but with regards "WHy would you have your headphones in if you're not listening to music" the answer is to use the phone handsfree.
Whether this is in the car (law over here) or while in the office a lot of people over here use headphones instead of holding the phone to your ear, some believe that the safer or healthier. No real proof but handsfree is popular.
Saw this same post on the Neonode forum and the SE's do the same so I presumed normal and as I say if you were using the headphones as handsfree if actually a good thing. Yes the vibrate would tell you but say you're at someone else's desk and can't hear the phone vibrating across your desk (hell of a vibrate really isn't it).
Anyway, hope that answers the headphones question
So why did some people say this doesn't happen to them?
That's an unanswerable question. It could be any number of reasons and going on the state of play with the ROMs is possibly down to this.
Going through the forums its amazing the number of people that have different problems with apparently the same phone.
I have the exact same problem, and am still looking for a solution.
The most irritating thing is that when I turn all ringtones off (only vibrate on) and I receive an incoming call, the sound that is currently playing (windows media player or some other program) is played for a fraction of a second thru the external speaker (the program pauses the mp3 playback on an incoming call, but this happens to late). Because of this it's impossible to use the phone for MP3 playback in a place where it's important that no sound is produced.
It would be really nice to completly turn the external speaker off when a headset is plugged in (i find it really strange this isn't the case right now).
It would be nice if someone found a solution for this (in my opionion) huge problem.
Yea,
I found this is irritating too,
I am using pocketMax Phonealarm
and mute:
- system volume
- phone volume
but max the call volume ( as I think that's required to answer a call)
I plugged my headset (using 2.5mm to 3.5mm jack) and listen the music using winamp & increase the volume, apparently the system volume is increased too ==> I think that's the reason why everytime:
- incoming phone call
- any reminder
is sounded in the headset too.... totally [email protected]@[email protected]#
Any solution for this????!!!!!
I'm sure most of you know what I'm talking about. If you recieve any notifications When listening to any audio through headphones (or through the mini usb port), the device pushes the notification sound through the speaker. This is fine when having a ringer enabled because I'd obviously want to hear the ring. What I dislike though, is when I have notfications (rings, text messages, etc.) on silent or vibrate, it pushes the audio that I'm listening to through the speaker still. I've always disliked this in WM. My PPC6700 did the same thing, but now I'd really like to know if there's a way to change this.
Now that I have an 8GB SD card, my Titan has started to become my primary mp3 player. I do FOH sound at a local club, and when playing music between bands, it's really annoying to have the music suddenlly cut out because a phone call is coming in. Likewise when I'm quietly watching MobiTV with my headphones on at work, and suddenly, Survivorman is blaring through the speaker because a call is coming in...You get the point. The ringer is off, but the phone still trys to let a ring through the speaker anyway, and since no ring is selected, it pushes any audio being played through.
I realize that this relatively simple problem probably does not have a simple solution as this is probably buried deep in the architecture of how WM handles audio gateways...that almost sounded like I knew what I was talking about; I can assure you that I do not . This is where you guys come in. I'm willing to test any ideas you guys have got. I don't care if it f&#*s up my phone...a hard reset isn't going to ruin my day. I'd just like a solution for this.
Ideas??
Thanks for your help and for this forum!..it has saved my phone more then a few times already.
Me too having the same problem. I listen to music via my bluetooth mono headset and these notifications (whcih I get plenty) disconnect the bluetooth audio gateway, forcing me to reach out to my phone and enabling the audio gateway again.
Yeah, I hate that too! I have the i760, one other thing on this phone I dislike is that the volume must be on to hear audio through my headphones. But there I am in a store listening to some rock at a loud volume, and there it is playing for the entire f'n store to hear when I get a call, thanks PPC!
Possible Solution!!!!
Might I recommend a Profiler. Like PPCProfiler. Just Google it.
What you could do is create a profile called music or what ever you want to name it. Then you could set up that profile to turn ringers on with the volume level you like and with or without vibration and select silent or vibrate only for the notifications. You could really but together any combination. I believe with PPCProfile you can even make a profile as a Headset Mode. So it will auto detect the headset and switch without having to do anything else.
Cheers.
Curious G.
Thanks for the reply, but a profiler isn't exactly what I'm looking for. I've had them before in previous roms. The problem isn't that it's an inconvienence to switch to silent or vibrate. It's that when things are silenced or on vibrate, any background audio is pushed through the speaker while the notification is going off. Meanwhile that audio that I want to be played cuts out of the path that I want it going through (ie. headphones).
Thanks tho...I'm open to any ideas.
There I am listening to some cool tunes with my G2 and headphones. All of a sudden my ringtone BLASTS out in my headphones as someone is calling.
Can anyone advise how to have the ringtone sound at low volume when wearing 'phones, whilst leaving the ringtone at it's normal level when headphones aren't plugged in?
I could adjust the ring volume manually each time but surely there is an easier way.
g00nerz said:
There I am listening to some cool tunes with my G2 and headphones. All of a sudden my ringtone BLASTS out in my headphones as someone is calling.
Can anyone advise how to have the ringtone sound at low volume when wearing 'phones, whilst leaving the ringtone at it's normal level when headphones aren't plugged in?
I could adjust the ring volume manually each time but surely there is an easier way.
Click to expand...
Click to collapse
Having the familiar problem that notifications sounds are played louder than ring sounds - always!
If i worked in HTC's R&D department, i'd be such a pain in the ar*e, as i'd never let any of this get through to the general public!
Who's testing this stuff?! Monkeys?!!
felikz said:
Having the familiar problem that notifications sounds are played louder than ring sounds - always!
Click to expand...
Click to collapse
Go to Settings, Sound & Display and you will find that you can set the volume of Media, Ringtone and Notifications separately (Ringtones and Notifications are under Ringer Volume).
Alternatively, try Toggle Settings from the Market. You can set the volume of Ringtones, Alarms, Media and Notifications independently for each profile, and create a Headset profile which will turn up the Media volume and turn down the others. Unfortunately it is not possible to create an automatic Headset profile so you would still have to select the profile manually.
J
hi,
how can i disable the rear speaker while listening to music with headset.
because, if the phone rings or any phone notification apperars, the speaker becomes active. so the music playing on player on speaker with the notifications. this is very disturbing..
thanks in advance for your suggestions
you cant
thats not possible, simply because nokia has this feature on some N series where when headphones are connected the speaker will not ring only the headphones will sound, this bacomes a problem if you lose your phone in loud places and no one can hear it. also, the alarm doesnt sound.
you could always put your phone on vibrate!?!?
thanks your reply, but after call the notification sounds on speaker. is there a way to turn steaker off after call?
i solved my problem changing hkcu\\controlpanel\soundcategories\ring\speaker value to '0' and soft reset now When the headset is plugged, if the phone rings speaker dont active.
Hi to all,
I have noticed a big drop in ringtone volume if music is playing when a call comes in.
It is so low that I can often not hear the ringtone at all. This is with it set at maximum before the turning on the music. Attempting to Change the media volume makes no difference in the ringtone volume.
If I switch off the music then test by calling the phone, the ringtone comes through the headset at full volume. Turn on the music and try again, I can barely hear it.
I can only tell by the muting of the music as the call comes in. Notification volume seems unaffected.
Have any of you noticed this issue as well? Any fixes?
Thanks in advance.