drivers
asix.ko gl620a.ko net1080.ko smsc75xx.ko
dm9601.ko mcs7830.ko plusb.ko smsc95xx.ko
I had tried to use dm9601
install the driver
adb push usbnet /data/local/tmp
adb push dm9601.ko /data/local/tmp
adb shell
su
mount -o rw,remount /system
cp /data/local/tmp/usbnet /system/bin
chmod 755 /system/bin/usbnet
cp /data/local/tmp/dm9601.ko /system/lib/modules
mount -o ro,remount /system
Basic usage:
int a Terminal, enter
su
usbnet
If you can see eth0 and IP address infomation, it has connected to network。
for static ip
ifconfig eth0 add 192.168.0.2
busybox route add default gw 192.168.0.1
setprop net.dns1 192.168.0.1
Has anyone else tried this? Im thinking of trying it out.
Related
adb devices
adb push asroot2 /data/local
adb shell chmood 0755 /data/local/asroot2
adb shell
$ /data/local/asroot /system/bin/sh
$ mount -o remount,rw -t yaffs2 /dev/block/mtdblock /system (or is it -zero)
$ cd /system/bin
$cat sh > su
$ chmod 4775 su (or 4755?)
$exit
adb push recovery-RA-heroc-v1.2.3.img
adb shell
$ su
# flash_image recovery recovery-RA-heroc-v1.2.3.img
then boot to recovery by typing: reboot recovery while pressing volume down and the when it boots to screen press home?
is this how to do it? help please
Code:
adb devices
adb push asroot2 /data/local
adb push recovery-RA-heroc-v1.2.3.img /data/local
adb shell
Code:
chmod 0755 /data/local/asroot2
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock /system
cd /system/bin
cat sh > su
chmod 4755 su
flash_image recovery /data/local/recovery-RA-heroc-v1.2.3.img
reboot recovery
corrected some stuff for ya make sure asroot2 and recovery-RA-heroc-v1.2.3.img is in same directory as adb.exe
and that's good to go
UPDATE: no longer requires a sd card to root + recovery image + made copy/pasteable
fullgrown said:
adb devices
adb push asroot2 /data/local
adb shell chmood 0755 /data/local/asroot2
adb shell
$ /data/local/asroot /system/bin/sh
$ mount -o remount,rw -t yaffs2 /dev/block/mtdblock /system (or is it -zero)
$ cd /system/bin
$cat sh > su
$ chmod 4775 su (or 4755?)
$exit
adb push recovery-RA-heroc-v1.2.3.img
adb shell
$ su
# flash_image recovery recovery-RA-heroc-v1.2.3.img
then boot to recovery by typing: reboot recovery while pressing volume down and the when it boots to screen press home?
is this how to do it? help please
Click to expand...
Click to collapse
Up to the exit is the rooting part, yes. After that you can shell in and type "su" and have root access.
The rest of it is installing a custom recovery image.
thank you!!! now i'm rooted!!!
I have upgraded from 309 to 318.......wanting to root it using z4root and universal androot but both apps dont work for this 318 version.....
does anyone have any clues to what i can do? please advise, thanks
Please Do Not Post the Same Question in 2 Forums i will Lock this one as i have answered the other one
Quoted from fards' thread: http://forum.xda-developers.com/showthread.php?t=844966&highlight=rageagainstthecage
Been rooting this way since day 1 -- if you aren't the type in command prompt, you can also just copy and paste the command lines exactly~
GET ECLAIR/FROYO version of Superuser.apk and su
from http://forum.xda-developers.com/showthread.php?t=682828 extract the two files to the directory you're working from..
GET rageagainstthecage from
http://stealth.openwall.net/xSports/RageAgainstTheCage.tgz
extract the rageagainstthecage-arm5.bin to the same directory you're working from
open a terminal/command line
adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage
adb push Superuser.apk /data/local/tmp/Superuser.apk
adb push su /data/local/tmp/su
adb push busybox /data/local/tmp/busybox
adb shell chmod 700 /data/local/tmp/rageagainstthecage
adb shell chmod 700 /data/local/tmp/busybox
adb shell
cd /data/local/tmp
./rageagainstthecage
******this will kill adb server but manually kill it anyway and restart it ******
adb kill-server
adb start-server
* daemon not running. starting it now *
* daemon started successfully *
adb shell
mount -o remount,rw -t yaffs2 /dev/block/mtdblock6 /system
**********Follow the following steps to install Superuser.apk, busybox,su ****************
cd /data/local/tmp
./busybox cp busybox /system/bin/
chmod 4755 /system/bin/busybox
busybox cp Superuser.apk /system/app/
busybox cp su /system/bin/
chmod 4755 /system/bin/su
exit
exit
then reboot streak
************to remount filesystem as readonly,*************
adb shell
# su
su
#mount -o remount,ro -t yaffs2 /dev/block/mtdblock6 /system
# exit
exit
Click to expand...
Click to collapse
Hi,
a pin of my USB connector is broken so I cannot get a USB data connection to a PC (but charging still works ...).
How can I root the official 318 build of froyo ? More specifically, in the new build, there doesn't seem to be any mounted filesystem on which one can copy RATC to run it.
Any hint welcome.
Have you already tried superoneclick, androot, or z4root? If so, then maybe try the below.
I don't know if this will work but you can try fard's instructions to root manually and use "Terminal Emulator" from Market instead of ADB SHELL, but i don't know what will happen when you run rageinthecage~ You will need to change the instruction a bit for your case.
http://forum.xda-developers.com/showthread.php?t=844966&highlight=rageagainstthecage
Instructions:
1. Copy all the needed files (from fards thread) into the SDCARD.
2. run Terminal Emulator
3. cd /sdcard/
4. busybox cp rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage
5. busybox cp Superuser.apk /data/local/tmp/Superuser.apk
6. busybox cp su /data/local/tmp/su
7. busybox cp busybox /data/local/tmp/busybox
8. chmod 700 /data/local/tmp/rageagainstthecage
9. chmod 700 /data/local/tmp/busybox
10. cd /data/local/tmp
11. ./rageagainstthecage
12. Reset Terminal
13. Start Terminal Emulator again
14. mount -o remount,rw -t yaffs2 /dev/block/mtdblock6 /system
15. follow the rest of the instructions below "mount -o remount,rw -t yaffs2 /dev/block/mtdblock6 /system "
In case you can't find it in the thread, here is the original post by fards:
GET ECLAIR/FROYO version of Superuser.apk and su
from http://forum.xda-developers.com/showthread.php?t=682828 extract the two files to the directory you're working from..
GET rageagainstthecage from
http://stealth.openwall.net/xSports/RageAgainstTheCage.tgz
extract the rageagainstthecage-arm5.bin to the same directory you're working from
open a terminal/command line
adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage
adb push Superuser.apk /data/local/tmp/Superuser.apk
adb push su /data/local/tmp/su
adb push busybox /data/local/tmp/busybox
adb shell chmod 700 /data/local/tmp/rageagainstthecage
adb shell chmod 700 /data/local/tmp/busybox
adb shell
cd /data/local/tmp
./rageagainstthecage
******this will kill adb server but manually kill it anyway and restart it ******
adb kill-server
adb start-server
* daemon not running. starting it now *
* daemon started successfully *
adb shell
mount -o remount,rw -t yaffs2 /dev/block/mtdblock6 /system
**********Follow the following steps to install Superuser.apk, busybox,su ****************
cd /data/local/tmp
./busybox cp busybox /system/bin/
chmod 4755 /system/bin/busybox
busybox cp Superuser.apk /system/app/
busybox cp su /system/bin/
chmod 4755 /system/bin/su
exit
exit
then reboot streak
************to remount filesystem as readonly,*************
adb shell
# su
su
#mount -o remount,ro -t yaffs2 /dev/block/mtdblock6 /system
# exit
exit
Click to expand...
Click to collapse
Well...
yes, I have tried all that.
The main problem with the last option (i.e. CLI) is that the directory /data/local/tmp/ is not user writable (actually /data permissions are 751). So I was in search of a another directory (in an executable partition) where I can copy rageagainstthecage-arm5.bin.
Finally found it : "find" was my friend. /firstboot/sqlite/jackpal.androidterm/ is owned by my user (ID 10123)! It's the only one I found in all the filesystems!
Note that "find" is available through /system/bin/busybox_1P8P1. Btw /firstboot/sqlite/jackpal.androidterm/ seems to be linked to the terminal process.
Ran rageagainstthecage-arm5.bin various times to no avail ! It didn't give me root!
So I posted a question yesterday to see if anyone could instruct me on how to root my phone using a MAC, no PC AT ALL. And then install CWM w/o having to use ODIN, b/c I do not have a PC. Well after some researching on my own I found out how and here is how I did it.
To root: Follow this thread (it requires using adb commands)
http://forum.androidcentral.com/ver...s/34188-rooting-using-mac-video-tutorial.html
To install CWM reference this thread, but here are the steps. You must download and install ROM Manager from market and also download zimage file. This also requires adb commands.
http://forum.xda-developers.com/showthread.php?t=804248
Copy zImage to the root folder of your SD Card
Open Terminal
$ cd (path to android sdk)/tools
$ ./adb push (path to redbend_ua)/redbend_ua /data/local
$ ./adb shell
$ cd /data/local/tmp
$ chmod 0755 rage.bin
$ ./rage.bin
(username)$ ./adb shell
# mount -t rfs -o remount,rw /dev/block/stl9 /system
# cd /data/local
# chmod 755 redbend_ua
# ./redbend_ua restore /sdcard/zImage /dev/block/bml7
--Phone Reboots--
$ ./adb shell
$ su
# cd /data/local
# ./redbend_ua restore /sdcard/zImage /dev/block/bml8
I know this is vague, but if you know what you are doing and reference the threads you should have no problem. Let me know if you have any questions.
I am trying to Root the new Arc but I don't want to brick it in any way.
Someone posted this method and I want to know if there are any risk:
push the busybox binary to /data/local/tmp/:
adb push busybox /data/local/tmp/
change permission to execute:
adb shell "chmod 755 /data/local/tmp/busybox"
then enter adb shell and type following commands:
cd /data/local/tmp/
mount -o remount,rw -t yaffs2 `mount | busybox grep /system| busybox awk '{print $1}'` /system