Hi all,
I have a Sony Ericsson Xperia X2. The problem is, its power button is not working 100% right, you have to either press it really hard or use your nail. So i've been trying to find a way to wake the device using a different button, but no luck so far.
I've tried:
Changing the registry key: HKCU\\ControlPanel\Keybd\DefaultKeyLock from 1 to 0. as stated on a different thread, however my phone registry does not have the "defaultkeylock" string.
Installed a CAB for "HTC Key Lock" which lists several options, one of them being the one i want (waking up the device with any key) however, none of them seem to work on the Xperia X2, as soon as I select one and press "OK" i get a blank screen.
I've also installed S2U2 as i *think* i read somewhere before that it has an option to do what i want but i havent been able to find it so far.
Anyone got any advice please ?
Hey man,
Did you solve your issue?
As you can see here http://forum.xda-developers.com/showthread.php?t=1501953 I have a similar problem.
I will try the same as you did and if I find anything new I let you know.
Regards,
cru5her
Different phones have different keys for this. I suggest You browse through every subkey in HKCU\ControlPanel and HKLM\ControlPanel as I have an old Asus phone and it has a setting for this feature (wakeup with all buttons / power button only) in Settings, which changes the key in HKLM\ControlPanel\AsusSettings\Wakeup\WAKEUP-ENABLE\.
I am a week user in this.
I'm using PHM Regedit in my phone, and look what I found:
HKLM\Hardware\DEVICEMAP\KEYBD
It has inside:
Value name: CalVKey
Value Data: 0 (Base Decimal)
Value name: ContLessVKey
Value Data: 0
Value name: ContMoreVKey
Value Data: 0 (Base Decimal)
Value name: Drivername
Value Data: keypad_drv.dll
Value name: Irq
Value Data: 4 (Base Decimal)
Value name: MemBase
Value Data: 2147647488 (Base Decimal)
Value name: TaskManVKey
Value Data: 46 (Base Decimal)
There is also:
HKLU\ControlPanel\Keydb\ChangeBackVKeyCode
inside it:
Value name: OM10-ML-MainWndClass
Value data: 8 (base decimal)
--------------
Is there any way to make power button be substituted for any other button of my phone?
Related
is it possible to hide/remove the titlebar clock?
In the Registry go to:
HKLM\Software\Microsoft\Shell
If not exist make a key TBOpt (Binary Value) and set the key value to 2.
If the key exists then change the value to 2. This will only show the date.
If the date isn't wanted then set the value to 0.
Regards,
Mark
markutah said:
In the Registry go to:
HKLM\Software\Microsoft\Shell
If not exist make a key TBOpt (Binary Value) and set the key value to 2.
If the key exists then change the value to 2. This will only show the date.
If the date isn't wanted then set the value to 0.
Click to expand...
Click to collapse
What have to be done, do disable all output in the titlebar (no clcok, no date)????
Stefan
change the value to zero. Possible values and there meaning are as follows:
0 = no time or date
1 = time
2 = date
3 = both
Mark
Is there an update to this for WM6?
Anyone know what this registry entry does?...Was actually looking for a similar today screen lock as on the HTC Wizard and a few other devices.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Today\Items\"Device Lock"
That's what controls the HTC Wizard one - it's in my reg as well (HTC Wizard::Qtek 9100). It looks for "shutil.dll" on here.. does your reg key have any such/further data?
Found the shutil.dll in the windows directory of my Exec and theres only a DWORD data value of 1 named Enabled...no other reference to the .dll file...I quite liked the device lock on the wizard that I had before getting the Exec...wonder if this regitry entry can be changed to get the similar effect on the universals.
One way to find out....
DLL = shutil.dll
Enabled = 1
Flags = 0
Options = 0
Order = 38
Selectability = 1
Type = 4
All the numerics are DWORD decimals
Tried it but nothing appears on the today screen...although after adding the registry entries it does show up in the today settings...once enabled it actually pushes my today screen down a little by a couple of millimeters as if its trying to display something...but nothing actually visible.
curses
what's the size of your shutil.dll looking like? it's 29k here (29,696 bytes)
mine is 5.96kb (6014 bytes) here,
poss down to rom builds.
me missus has a wizard and i want the device lock today aswell, now ive seen it.
In theory you could place the Wizard file in your windows dir, thereby 'overriding' the Universal's ROM one, no?
Also, it's not really all that, imho... it doesn't work happily with the device password function (auto-unlocks if the (accidental) buttonpress is the on/standby button) for example.
DLL = shutil.dll
and
DLL-Name = shutil.dll
it works for me
I thought creating a thread that shows the various registry hacks might be helpful/useful/contructive/destructive.
I am still pretty new to all of this and would love to know what others have discovered to get 'more' from our PPCs.
Thanks in advance for the contributions!
I am using PHM Registry for my editor.
did you try searching? they are scattered all over this forum
Tregrad said:
did you try searching? they are scattered all over this forum
Click to expand...
Click to collapse
That is why I thought it might be nice to have one location for them.
Registry Hacks - List 1
You can download and install PHM Registry Editor on your phone to modify the registry.
http://www.phm.lu/Products/PocketPC/RegEdit/
Unlocking/Unhidding the extended_rom
\HKLM\System\StorageManager\Profiles\EXT_FLASHDRV \
then change the value (default at 1) to 0
Wait at least a minute before doing a soft reset.
----
Get rid of the voicemal icon on the '1' key (3.16+)
The 3.16 rom has added an voicemail icon to '1' key which also caused my skin to look messed up. You can disable it:
\HKEY_CURRENT_USER\ControlPanel\PhoneExtendFunctio n\CDMA\
set the DWORD value
"EnableVoicemailIcon" = "0"
by default it is set to 1.
---
Reserved - future use
Reserved - future use 2
Reserved - future use 3
i think this is a good idea as well... since ppcgeeks is down. just fyi, there are some listed on sprintmogul.net and a couple other sites.
Your really aught to just keep editing the FIRST post and as people find new reg hacks you can add them to teh first post.
Tregrad said:
Your really aught to just keep editing the FIRST post and as people find new reg hacks you can add them to teh first post.
Click to expand...
Click to collapse
Right -- that is what I basically plan on doing.
went over to geeks and got a PANT laod of them by doing a "search" in the Titan forum
You can download and install PHM Registry Editor on your phone to modify the registry.
http://www.phm.lu/Products/PocketPC/RegEdit/
1-Unlock Phone (certificate security disabled) rev.1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1001 = 2
-> Change the value data from 2 to 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1005 = 16
-> Change the value data from 16 to 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1017 = 128
-> Change the value data from 128 to 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies
-> Add new value "0000101b": Dword = 1
Close registry editor and soft reboot.
------------------------------------------------
2-Change Bluetooth headphones from mono (default) to stereo:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A2 DP\Settings
UseJointStereo: change the DWORD from “1” TO “0” no quotes.
HKLM\Software\Microsoft\Bluetooth\A2DP\Settings\Bi tPool to 50
HKLM\Software\Microsoft\Bluetooth\A2DP\Settings\Ma xSupportedBitPool to 50,
------------------------------------------------
3-Today screen, Single line date
HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\TODAY
"Date"=dword:1
"AutoSingleLineDatePlugin"=dword:1
------------------------------------------------
4-Change Operator name
HKLM\System\State\Phone\Current Operator Name
------------------------------------------------
5-Disable the pop-up notification that says Message Sent rev.1
HKLM\SOFTWARE\Microsoft\Inbox
create a new key "Settings"
create a new string value "SMSNoSentMsg" and set the value to 1
Hit ok and select "Ok" to save and you are in business.
------------------------------------------------
6-Speed up
Using a registry editor such as PHM RegEdit lookup and change the following three values:
HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\Cac heSize=0x1000(4096)
HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\Ena bleCache=0x1(1)
HKEY_LOCAL_MACHINE\System\StorageManager\Filters\f sreplxfilt\ReplStoreCacheSize=0x1000(4096)
------------------------------------------------
7-Enable GPS icon in the Setting/System menu
HKLM\ControlPanel\GPS Settings
Change "Hide" to 0
------------------------------------------------
8-Enable Bluetooth and IrDA in Wmodem
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\WModem
"Hide IrDA"=dword:00000000
"Hide Bluetooth"=dword:00000000
"Hide USB"=dword:00000000
-------------------------------------------------
9-Registry Hack Improvement of using bluetooth listen music
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BtA2dpSnd
Add "Priority256 "= dword:60 (Use Dword Value)
HKLM/SOFTWARE/Microsoft/Bluetooth/AudioGateway/Capability
(Dword:69)(Default is 37)
HKLM/SOFTWARE/Microsoft/Bluetooth/AD2P/Settings/BitPool
(Dword: 60)(Default is 30)
-------------------------------------------------
10-Unlocking/Locking Items into position on today screen
HKLM\Software\Microsoft\Today\Items\"Plugin you want to lock or Unlock"
change TYPE from 5 to 4
5=locked
4=unlock
-------------------------------------------------
11-Camera Flip Pictures Fix
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image
Change "EnableEncodePortrait" to 0
When you take a picture it is saved in the wrong configuration and you then have to rotate
it with a picture editor so its not sideways and save it again. This is the fix for it.
-------------------------------------------------
12-Disable Multi-NAI
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\WModem\Multi-NAI default is 1, set to 0(00000000)
-------------------------------------------------
13-Put Date in Title Bar
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:00000001
"TBOpt"=dword:00000003
[HKEY_LOCAL_MACHINE\nls\overrides]
"SSDte"="M/d/yy "
***** 2 spaces needed aafter the yy ****
fyi no quotes on the sting values if using a reg edit.
--------------------------------------------------
14-battery, screen rotate, and CommManager icons down in your tray
see cab in this post
http://ppcgeeks.com/reg-tweaks-06-19...,60.html#57690
--------------------------------------------------
15-Change Vibrate Strength
HKLM\SOFTWARE\OEM\VIB
STRENGTH_LOW set to 1.
--------------------------------------------------
16-Disable Ambient Light Sensor
KEY_CURRENT_USER\CONTROL PANEL\BACKLIGHT set auto sensor from 1 to 0
--------------------------------------------------
17-how to get rid of some of thoes annoying sounds while on calls or making calls (or attempting), such as adjusting the volume,
go to HKEY_CURRENT_USER\ControlPanel\Sounds
Loudestincallvolume = the sound it makes when you turn the volume all the way up (that annoying little useless sound) delete this key to remove that
Quietestincallvolume = the same but for when you turn it all the way down
Networkdrop = the dropped call /w lost signal sound
Calldrop = caller hangs up before you do sound
---------------------------------------------------
18-Change ringtone/vibrate/LED flash characteristics
If you would like more control over how your device rings/vibrates/flashes its LEDs on events, you can can change the Script values of these events. For example, for an incoming call performing 'activate device, play ringtone, wait 3 seconds, repeat':
HKCU\ControlPanel\Sounds\RingTone0\Script = "apw3r" (REG_SZ string, no quotes)
For performing 'active device, set volume to 33%, play ringtone, set volume to 67%, play ringtone, set volume to 100%, play ringtone (no repeat)':
HKCU\ControlPanel\Sounds\RingTone0\Script = "ac33pc67pc100p" (REG_SZ string, no quotes)
The following are the full codes available to you. Please note that all the codes are executed simultaneously except after a ringtone play / wait code. E.g. 'v1p' will vibrate and play at the same time, while vibrating for 1 second. But 'pv1' will play the ringtone through all the way first, then start vibrating for 1 second.
a = activate device
cN = set volume to N in percentage max volume
fN = flash notification LED for N seconds
p = play ringtone. Note that this will play the ringtone all the way through before continuing with the next code.
r = repeat. Note that this should be the last code in your Script string, if used at all.
vN = vibrate for N seconds
wN = wait for N seconds. Note that the device will wait this long before continuing with the next code.
NOTE: I tried this on my 6800 and changed the v0 to v1 and now it doesn't have just one long vibrate. v0 sets it to vibrate always.
-----------------------------------------------------
19-FIX THE SLOW RINGER
To do this, you will need your MSL, which only Sprint (or your provider) can provide you. Open up the phone app and dial ##778# (PST). You will be asked to enter your MSL. Enter it, and you will be brought into the provisioning of your phone. From the top left, select Modem Settings. On this page, your Slot Cycle Index (SCI) is how often your phone polls the tower for incoming calls, etc. This value is 1.28 seconds multiplied by 2^value (i.e 0=1.28 secs, 1=2.56secs) with 0 fastest, 7 slowest. The default is 2, but lowering it to 1 hasn't noticeably affected my battery life, and roughly 2.5 second (SCI 1) response time is far more reasonable than roughly 5 seconds (SCI 2)
-----------------------------------------------------
20-Change scroll bar size
Navigate to HKey_LOCAL_MACHINE\SYSTEM\GWE\ and tweak the following values.
cyHScr : Horizontal Scrollbars Height in pixels (default is 13)
cxVScr : Vertical Scrollbars Width in pixels (default is 13)
-----------------------------------------------------
21-Save Attachments or the Whole Email on your SD Card
The Key in WM6 changed from WM5. In WM6 it is:
HKLM\System\Inbox\Settings
For Attachments add "AttachPath" value="\Storage Card\Inbox\Attachments" datatype="string"
For the rest of the email add "PropertyPath" value="\Storage Card\Inbox" datatype="string"
For the paths above to work, you need to have the Inbox folder and Attachments subfolder created already. You must reboot for them to take effect.
-------------------------------------------------------
22-add the AM/PM to your time in the title bar
To Add AM or PM
1) Open your registry editor (either PHM Registry Editor or Resco Explorer 2003).
2) Go to HKEY_LOCAL_MACHINE\nls\overrides
3) Create 1st String Value: Name = S1159 & String = Am
4) Create 2nd String Value: Name = S2359 & String = Pm
5) Create 3rd String Value: Name = STFmt & String = hh:mm t'M'
6) Soft-reset
There has to be a space after the am or pm otherwise it will not display
Also
am=aM pm=pM
Am=AM Pm=PM
--------------------------------------------------------
23-Changing SoftKeys
Create the following keys and Strings in the registry:
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 2
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 3
112 is the left key and 113 is the right.
Set Default to what you want the key to read (ie. SMS)
Now for each key create a new string named Open and set the target path.
--------------------------------------------------------
24-This edit allows you to see the duration of your Vision connection along with a button to disconnect it.
You see it in the bubble that is displayed when you tap the Vision icon.
Click HKEY_LOCAL_MACHINE
Click ControlPanel
Click Phone
[at this point, the buttom grey status bar should read \HKLM\ControlPanel\Phone'
Click the bottom menu 'edit'
Select new dword value
Change the value name to "Flags2" (no quotes).
Select the 'hexidecimal' button.
Type 10
Click ok.
You should now see in the 'name/data' section:
Flags2 16 (0x00010)
When done, reset the device.
Tregrad said:
went over to geeks and got a PANT laod of them by doing a "search" in the Titan forum
You can download and install PHM Registry Editor on your phone to modify the registry.
http://www.phm.lu/Products/PocketPC/RegEdit/
Click to expand...
Click to collapse
Great hacks. Thanks for your contribution.
big list of em over here.
http://www.htcwiki.com/page/Tweaks+and+Hacks?t=anon
im usually not one to mess up my phone (ie im usually very cautious, dont play with what i shouldnt) but i wouldnt touch that ringtone modifying hack. i just tried it, hoping to set the ringtone more like it was on an old razr of mine (4vibes and a break) and it really messed up the phone application. like it wouldnt open. even after multiple restarts, everything. after i called my phone from another one, the phone app opened, thankfully, and then it started working but gave me quite a scare before that
EDIT- nope, that didnt fix it either. even after calling from another phone, once my 6800 is restarted, the phone app wont work again. god this will be the 4th hard reset this week. lame.
Duration of the rington
Has anyone an idea if it is possible to say the phone how long the ringtone should play till the phone hangs up and went into mailbox.
I mean is it possilbe to set the duration to eg. 30 sec or more till it hangs up.
I know there is a hack to stop ActiveSync from starting automatically but I can't find it. Searched here and PDAphonehome. Anyone have it?
Hey guys, I'm an active user on the Wing forums. I was wondering if there is such a reg edit to save SMS to the SD card instead of on the phone? Thanks for any details!
nuron said:
Hey guys, I'm an active user on the Wing forums. I was wondering if there is such a reg edit to save SMS to the SD card instead of on the phone? Thanks for any details!
Click to expand...
Click to collapse
Along those same lines -- I would like to move 'my docs' to my sd card.
HEY!!!!!!!! I GOT 6.1! but cant get to my IOTA!!!! HELP PLEASE!!!!!!!!!!!!!
djhollygrove said:
HEY!!!!!!!! I GOT 6.1! but cant get to my IOTA!!!! HELP PLEASE!!!!!!!!!!!!!
Click to expand...
Click to collapse
have you unlocked your extended ROM? Do that and rub the IOTA cab.
HTC should have warn us that Excel editing is almost impossible in this capacitive screen,,, now I know why Iphone does not include it !!!
I tried some POgo capacitive pens (cost HKD 35) for IPhone but it does not work well on HD2...the seller confirms thatit only works well for Iphone..
I need my excel everyday..and I am coming from HD...
Anyone has a better suggestions aside from returning this thing ??
I have no trouble using Excel on the HD2 - took me a while to work out that you have to tap and hold on screen for highlighting cells, but other than that, works well for me
I can only use Excel when it is in landscape mode. I had to install a Long Press Call Button hack to enable landscape use. But now it is at least usable.
I think I really need a stylus... It's really hard to tick drop down menus..and small cells..
Any one knows of better solution aside from returning this ?
With pinch-to-zoom, tap-and-hold to select a range of cells, and Gyrator 2 to rotate it to landscape I don't think you'll need a stylus, although you will be a bit slower.
I had that too
sectorlord said:
HTC should have warn us that Excel editing is almost impossible in this capacitive screen,,, now I know why Iphone does not include it !!!
I tried some POgo capacitive pens (cost HKD 35) for IPhone but it does not work well on HD2...the seller confirms thatit only works well for Iphone..
I need my excel everyday..and I am coming from HD...
Anyone has a better suggestions aside from returning this thing ??
Click to expand...
Click to collapse
In the beginning, I had that same problem, but - after a bit of calibrating your eye-finger coordination, I MISS a cell only one in (about) 10 clicks.
And I work with 28 cells per screen height (portrait) - that's about 3mm cell height.
(I had a problem selecting a range - but by chance, I figured that the trick is to hold your fingger down for about 1.5 seconds.
Then a <[ T ]> symbol appears for a 0.5 senods, indicating that if you drag
your finger, it would go into section selection mode instead of Scroll mode)
Edit - try the "DAGi" stylus - its transparent, and pretty accurate,
abd there are 2 samples on youtube showing the difference between the pogo snd the DAGi Styli
I know you may not want to hear it ... but if you do a lot of Excel, you should get Softmaker Office 2008. It is pretty much a equal to desktop office.
Yes ... things are still small .... but using zooomer ... you can easily use everything with your finger ...
In fact ... aside from editing some cells when the font is really small ... I have no difficulties at all ... Zooomer is your friend.
Cheers
Paul.
Excel autorotate
FunMCRider said:
I can only use Excel when it is in landscape mode. I had to install a Long Press Call Button hack to enable landscape use. But now it is at least usable.
Click to expand...
Click to collapse
Registry tweaks:
AUTOROTATE
HKCU/Software/HTC/HTCSENSOR/GSensor/
AutoRotation = 1
Excel:
- In ModuleName string - Value name: "Excel" Value data: "\windows\pxl.exe"
- In WhiteList string - Value name: "Excel1" Value data: "BOOKWIN"
- In WhiteList string - Value name: "Excel2" Value data: "PXLMainWnd"
Word:
- In ModuleName string - Value name: "Word" Value data: "\Windows\pword.exe"
- In WhiteList string - Value name: "Word" Value data: "Pocket Word"
- In WhiteList string - Value name: "Wordpad" Value data: "WordPad"
Notes:
- In ModuleName string - Value name: "Notes" Value data: "\Windows\Notes.exe"
- In WhiteList string - Value name: "Notes" Value data: "Notes"
TomTom:
- In ModuleName string - Value name: "TomTom" Value data: "\program files\navigator\tomtom navigator.exe"
- In WhiteList - string Value name: "TomTom" with value data: "MunichWinClass"
Appointment:
- In ModuleName string - Value name: "Appointments" Value data: "\Windows\HTCAppointment.exe"
- In WhiteList string - Value name: "Appointments" Value data: "HTCAPPOINTMENT"
Contacts:
- In ModuleNam string - Value name: "Contacts" Value data: "\Windows\ContactEditor.exe"
- In WhiteList string - Value name: "Contacts" Value data: "HTC_CONTACT_EDITOR"
File Explorer:
- In ModuleNam string - Value name: "File Explorer" Value data: "\Windows\fexplore.exe"
- In WhiteList string - Value name: "File Explorer" Value data: "FEXPLORE"
Start:
- In WhiteList string - Value name: "Start" Value data: "MSSTARTMENU"
Nice !
Xaddict said:
Registry tweaks:
AUTOROTATE
HKCU/Software/HTC/HTCSENSOR/GSensor/
AutoRotation = 1
Excel:
- In ModuleName string - Value name: "Excel" Value data: "\windows\pxl.exe"
- In WhiteList string - Value name: "Excel1" Value data: "BOOKWIN"
- In WhiteList string - Value name: "Excel2" Value data: "PXLMainWnd"
Word:
- In ModuleName string - Value name: "Word" Value data: "\Windows\pword.exe"
- In WhiteList string - Value name: "Word" Value data: "Pocket Word"
- In WhiteList string - Value name: "Wordpad" Value data: "WordPad"
Notes:
- In ModuleName string - Value name: "Notes" Value data: "\Windows\Notes.exe"
- In WhiteList string - Value name: "Notes" Value data: "Notes"
TomTom:
- In ModuleName string - Value name: "TomTom" Value data: "\program files\navigator\tomtom navigator.exe"
- In WhiteList - string Value name: "TomTom" with value data: "MunichWinClass"
Appointment:
- In ModuleName string - Value name: "Appointments" Value data: "\Windows\HTCAppointment.exe"
- In WhiteList string - Value name: "Appointments" Value data: "HTCAPPOINTMENT"
Contacts:
- In ModuleNam string - Value name: "Contacts" Value data: "\Windows\ContactEditor.exe"
- In WhiteList string - Value name: "Contacts" Value data: "HTC_CONTACT_EDITOR"
File Explorer:
- In ModuleNam string - Value name: "File Explorer" Value data: "\Windows\fexplore.exe"
- In WhiteList string - Value name: "File Explorer" Value data: "FEXPLORE"
Start:
- In WhiteList string - Value name: "Start" Value data: "MSSTARTMENU"
Click to expand...
Click to collapse
Anything for total commander ?
I tried adding in the module
TotalCommander = "\Program Files\Total commander\cecmd.exe"
and in the the whiteList
TotalCommander = "Total Commander"
But it did not rotate.
what should I change ?
(And how would I know what to change with other programs ?)
Thanks
Rotation tute courtesy Audio Oblivion
Rotate tute
Som30ne said:
Anything for total commander ?
I tried adding in the module
TotalCommander = "\Program Files\Total commander\cecmd.exe"
and in the the whiteList
TotalCommander = "Total Commander"
But it did not rotate.
what should I change ?
(And how would I know what to change with other programs ?)
Thanks
Click to expand...
Click to collapse
See this tute.
Use this app.
You open an app then look in DotFred/Windows for the name of the window, then add it to the reg whitelist.
Thanks
Edit:
Ok, found ut the problem -
you need the window Class, and not the window Title (not the string in "", but the name that comes after it)
Thanks
Xaddict said:
Rotate tute
See this tute.
Use this app.
You open an app then look in DotFred/Windows for the name of the window, then add it to the reg whitelist.
Click to expand...
Click to collapse
Thanks for the quick reply.
I tried it (With total commander),
and foud that except "Total Commander/CE" there were 2 more windows,
but still - even after adding these windows and the "Total Commander/CE",
it did not rotate . . .
Any thoughts ?
Apologies if this has been asked before, but I am trying to update the
[HKEY_LOCAL_MACHINE\System\GDI\V1\Font Alias]
registry keys but with CE Reg Editor it says it doesn't have permission. I can edit the entries in many other places though. I've dug around a bit and the below appears to come recommended for getting round some security (particularly for some dll's and cabs), but depending on where I look the numbers are a bit different and sometimes the keys are as well. Please can someone confirm if these are the keys and whether they are all necessary.
HKEY_LOCAL_MACHINE\Security\Policies\Policies \0000 1001 = 2
Change the value data from 2 to 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies \0000 1005 = 16
Change the value data from 16 to 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies \0000 1017 = 128
Change the value data from 128 to 144
HKEY_LOCAL_MACHINE \Security\Policies \Policies
Add new value "0000101b": Dword = 1
Thanks!!
I've upgraded to the new 3.14 WWE ROM BTW and I don't remember having this problem before (it could be that one of the cabs I applied though made the changes for me, I'm just not sure)
UPDATE: Just found this
http://forum.xda-developers.com/showthread.php?t=373319
But I'm still not sure exactly what to do...
try - in cereg editor click tools - unlock registry
OMG thank you, that's totally it!!