I got this phone from eBay as "stuck in M" and thought I might give it a try to SBF it back to stock. So I tried SBFing to 4.5.605 and it works great but after the first reboot, it boots straight to stock recovery.
I read some threads online and some mention to wipe data/cache. I do that and reboot and it still keeps going back to recovery no matter what. I have complete access to the phone with RSD Lite but I cannot get it to boot to the OS. It just keeps booting back to stock recovery.
I would really appreciate some help here. It would be great if I can get this phone working again. Am I doing something wrong? Something specific about the Droid X I'm not aware of?
open1your1eyes0 said:
I got this phone from eBay as "stuck in M" and thought I might give it a try to SBF it back to stock. So I tried SBFing to 4.5.605 and it works great but after the first reboot, it boots straight to stock recovery.
I read some threads online and some mention to wipe data/cache. I do that and reboot and it still keeps going back to recovery no matter what. I have complete access to the phone with RSD Lite but I cannot get it to boot to the OS. It just keeps booting back to stock recovery.
I would really appreciate some help here. It would be great if I can get this phone working again. Am I doing something wrong? Something specific about the Droid X I'm not aware of?
Click to expand...
Click to collapse
sounds like its bricked it is possible that your sbf file is slightly corrupted or its the wrong one altogether try redownloading the sbf file or try .602 sbf dont reboot it if you can help it root it and put a different rom on it may just solve your trouble the linux method of sbf is more sound look into that instead of rsdlite if you have to use rsdlite make sure its is the newest leaked version of the program. Always make sure the program completes to the end and it says passed. pull the battery afterwards and do a factory restore hard reset should be good to go
Related
Am stuck on The Rubix Logo. I was on Rubix 1.89 then I was messing around w/phone a lil bit so I decided to load the stock rom back. It loaded up fine. I attempted to load Rubix 1.93 and decided not to wipe (Stupid mistake) and now am stuck on Rubix boot loop. Can someone assist me in loading into Recovery when DX is powered off please. I hope no one mentions SBF. I have no clue how to even begin that process
Been in a similar situation. I assume we're talking about getting into clockwork recovery?
If that's the case, your only solution is an sbf if it isn't kicking you into clockwork already.
Getting into stock recovery is achieved by holding down the home and power buttons from power off.
SBFing is done from the bootloader. that is entered from power off by holding down power, volume down, and the camera button.
You will need the 2.2 sbf file and RSD lite 4.8 on your windows machine in order to perform sbf.
Yes You assumed right about CW, I knew it wouldn't be long before I Fd this up. I already have RSd lite 4.8(I think...have to double check). Where can I get this SBF 2.2 file from? I've looked all over but most links are dead This really Sucks..
Couldn't I just load the Leaked 2.3.320 file instead of the 2.3.15, since I wanted to do the upgrade anyway? or is it just not that Easy?
The 2.3.320 is just a system sbf. I think there were kernel changes that went with that you'll have to have. Standby for PM.
im in need of that 2.3.320 too i have a sitting brick that will not do recovery but can flash with a sbf
Not sure what your situation is but I posted some help over at DF as well and my issue has been resolved by Seph and these instructions I followed. Hope it works for you as well and fyi here's link(http://www.droidforums.net/forum/drod2169-x/99143-rubix-focused-1-8-9-1-9-3-a-34.html#post1021218)
First thing to try, is to wipe data and cache from the android recovery (NOT clockwork recovery.. as.. most liklely you can't get to clockwork recovery.
Easiest way:
--Battery Pull
--When you put the battery back in, hold down the home button the phone.
--As it powers up, let go of the home button when you see the M logo.
--It should go into android recovery. When you see the little droid with the ! in a triangle, hit the search button.
--From the menu, wipe data and cache, then reboot.. it should take you into Focused...
When you get back in.. the FIRST thing I suggest, is to reload 1.8.9.. as it sounds like you do not have the TBH leak (If you don't have it, you probably don't want it)...
PLEASE read the first post, that talks about the differences between 1.8.9, and 1.9.3...
Since you will have already wiped data and cache, you shouldn't need to when loading 1.8.9.. if you have troubles with loading it, just wipe data/cache again...
I wish I had come here first!!!! Been trying to get ROM Manager to work and finally got all excited because it seemed as though it had finally taken, well, now I am stuck in a the Rubix boot loop as well. I've wiped my cache as mentioned about but not data yet. My only option for that is to wipe data is to wipe data/ factory reset. Is it safe to do that since I am rooted? I was running OTA 2.2 rooted.
I am in sbf with rsd lite and can not get it to do anything after loading the file for sbf on my X. It recognizes it but the radio button for the start will not do anything.
rcnaimee826 said:
I wish I had come here first!!!! Been trying to get ROM Manager to work and finally got all excited because it seemed as though it had finally taken, well, now I am stuck in a the Rubix boot loop as well. I've wiped my cache as mentioned about but not data yet. My only option for that is to wipe data is to wipe data/ factory reset. Is it safe to do that since I am rooted? I was running OTA 2.2 rooted.
Click to expand...
Click to collapse
Someone please PM me and tell me what I am doing wrong!!!!
Hey guys sorry to ask this but a friend of mine seems to have soft bricked his phone, he used bootstrap to get into recovery and tried to flash a rom, not sure what happened but now its stuck at the motorola boot logo and will not initialize the rom, we tried to get into recovery and was only able to get into the stock recovery, cant seem to get into CWM as much as we tried also did a data and cache wipe and still nothing, my main questions is how can i use rsdlite to flash it back to stock? i have already downloaded the full system sbf file as well as rsdlite and the motorola drivers that were listed in a thread i found earlier, can i just put the phone into download mode? any help would be greatly appreciated also im a fascinate user so the rsdlite and sbf stuff is a bit new to me
using a samsung fascinate running CM7 2.3.4
never mind I figured it out...
So I've been running MIUI 1.8.whatever for a few weeks and finally realized there hadn't been an update in a while. After discovering MIUI move into the 1.9.Xs I downloaded 1.9.16 and proceeded to update via CWM. While updating it told me 1.9.16 runs off the Gingerbread kernel. At that point I got worried since I had been running the Froyo kernel since I rooted my DX.
After the update I told it to reboot and now it gets stuck at the white M logo. I can boot into regular recovery but I CANNOT get my phone to boot into CWM recovery so I can run the backup!
I've tried every button combination with no luck. i've booted into regular recovery and selected reboot having read that it will boot back into CWM recovery. Needless to say that didn't work either. And lastly I tried running RSDLite to SBF the phone to .602 but since the phone can't fully boot up RSDLite doesn't see the phone.
That is where I am at and I seek the help and guidance of you much smarter folks to help me get my phone at minimum to CWM recovery.
PLEASE HELP!!!
Boot the phone into bootloader mode, then SBF.
Sent from my DROIDX using XDA App
I got it into bootloader mode now, but my computer isn't finding the OMAP drivers and the installation keeps failing. How can I get these drivers onto my computer? RSD isn't seeing the phone even in bootloader so these drivers seem to be the key.
You can find the drivers in this thread:
http://forum.xda-developers.com/showthread.php?t=1258599
Sent from my DROIDX using XDA App
I got RSDLite to see the phone. Now when I try to flash it, it makes it all the way to checking the checksums (which all pass) then tries to switch the phone to BP passthrough. It keeps failing to switch the phone to BP passthrough and now my phone will only boot to the Bootloader screen and says Code Corrupt. It'll let me run the flash again but RSDLite keeps failing at that BP passthrough switch.
Thats where i'm at now.
Try a different SBF file. I had problems like this when i tried to SBF once, but once I found the SBF file that works for me, its always worked since. (I've had to SBF like 6 times now haha)
will find an older sbf file and try that. Wil let you know.
Alright we've made progress! I was able to finally get the phone SBF'd to .602. Then I rocked the Pete's Droid Rooting program and all seemed to have gone smoothly... Except I cannot boot into CWM recovery at all! I've ensured ROM Manager has the correct flash for CWM installed, but when I click Reboot into CWM Recovery, it'll reboot normally. So I turned the phone off and held the Home + Power button to boot into regular recovery. I get the ! logo with the green android, but when I hit hte Search button nothing happens.
So now I'm rooted, but can't get to CWM Recovery to install ROMS.
What do you guys think?
Yeah, Reboot into Recovery from ROM Manager doesn't work for me usually either...in fact, I had to go into the Bootstrapper app, install the recovery again, and then hit Reboot Recovery. This is on Apex though, but can't hurt to try it.
Yea I finally got it figured out. Its been so long since I originally rooted my phone I forgot all about D2Bootstrapper. And I didn't read the how-to guide for updating to MIUI 1.9.16 so that was all on me.
So, I flashed CM7 to my droid 2 following the instructions in the Cyanogenmod Wiki. When I rebooted my phone it got stuck on the Motorola "M" logo and won't do anything. I tried holding X and the power button to boot into recovery and it goes to the android guy with the ! in the triangle but then I can't get it to do anything after that. Hitting the search button on the keyboard does nothing. How do I fix this?
This happened to me after trying to install miui roms. My only option was to do a sbf factory restore using rsdlite. I found a video tutorial on youtube. Just do a youtube search for droid2 factory sbf restore you should find it easily. Your gonna need 3 seperate files all available from the website in the video links.
[1up] said:
This happened to me after trying to install miui roms. My only option was to do a sbf factory restore using rsdlite. I found a video tutorial on youtube. Just do a youtube search for droid2 factory sbf restore you should find it easily. Your gonna need 3 seperate files all available from the website in the video links.
Click to expand...
Click to collapse
Nuts. I was afraid it was going to be something like that. I will see if I can find the video on youtube. Thanks for your help!
Stock recovery doesnt seem to work on Gingerbread, which is definitely not a good thing.
Before I got into the whole SBF restore using RSD Lite I did finally find a way to get into recovery. After holding the X and Power buttons to get to the little android guy I then discovered on another forum that you could hit both volume buttons as the same time and that finally did get me into recovery. Unfortunately, that did not do me any good. I tried wiping data and cache again and rebooting but didn't help. I then tried re-installing CM7 from there but it keeps aborting the install. I can't find my backup either although I have a feeling it would just abort like the CM7 install did. It appears to be the stock recovery as opposed to Bootstrap recovery. So, it looks like I am back to trying the SBF thing with RSD Lite. I will update this evening when I have a chance to try it.
Once you have all the files restoring with rsd lite takes literally no more than 15 minute. Its a pretty simple process. Go to this website droid2hacks.com and look for the unroot unbrick tutorial. It worked for me no problem and has links to all the correct files you will need.
Thanks so much guys for your help. I was able to SBF back to Froyo and then used this guide (http://www.droidforums.net/forum/cy...rbread-rom-cm4d2-gb-now-ready-prime-time.html) to get CM7 installed. Everything seems to be working now! Droid 2 is definitely not the easiest phone to get a ROM installed on, but at least it's pretty easy to SBF and try again.
Hey guys. I'm trying to fix my friends Defy for him. I've rooted my old Evo 4g, my wifes samsung transform, and her motorola Photon Q so I'm pretty familiar with rooting. But I'm having a problem with his Defy. Here's the skinny:
So his phone froze up on him. And after pulling the battery, it now won't boot. So I booted into recovery, and tried a factory reset. The factory reset won't complete. The little loading bars that go across the screen just keep going forever (I let them go for 3 hours straight one day). And I still can't get the phone to boot. So I figure, no big deal, i'll just root and install custom recovery. So I looked into rooting methods for the Defy, and they all seem to involve booting the phone. Does anyone have any ideas? Or know of a way to reflash the original recovery? I'm assuming the problem is the recovery. Thanks in advance for any help. And my buddy thanks you too.
You can use RSD to flash it with stock rom of your region. Do not flash any gingerbread rom if the phone never had gingerbread(you will have downgrade issues).
I don't want a Tapatalk sig!
never heard of rsd. Just looking into it. It seems people are saying I would need to wipe cash and data first? Problem is when I attempt to wipe cache it just goes on forever never finishes.
Any Luck M8
dhughes214 said:
never heard of rsd. Just looking into it. It seems people are saying I would need to wipe cash and data first? Problem is when I attempt to wipe cache it just goes on forever never finishes.
Click to expand...
Click to collapse
was just reading your post and was wondering if you have had any luck with your buddy's Defy ???
Flashing a fresh .sbf using RSDlite should fix the recovery problems, as it will overwrite it with a fresh one. The /system partition will be rewritten, also. After flashing, the phone might boot to the system already, but if not, just enter recovery and do a factory reset, now it should finish fine and boot fine, as well. (it doesn't matter if you do a factory reset before or after the flash)
Latest RSD Lite I've found is v6.1.4. You will also possibly need drivers, google for - "Motorola_End_User_Driver_Installation_5.9.0"
Keep us posted! Good luck