Related
I was rummaging through the forums...and here is what i found
http://forum.xda-developers.com/showthread.php?t=1155538
Please do use and test it
Kudos! to the Chinese Devs and the poster!
Enjoy!
PS = You can always press the thanks button
I personally think it was just me...but when I installed the apk, and rebooted my phone...it went into a softbrick...Stuck at boot screen...
had to Factory reset my phone....
Anyone else installed it successfully ???
Using kyrillos 5.7 with fugumod ultra 1366mhz kernel
Saw it last night
Was going to post
but it didn't work
Browser closes as soon as we open a flash Site
Other sites work fine
tested using stock browser cm7
@chirayu - lmao! its been a frenzy...! this flash!
newayz they say it works on dolphin browser flawlessly
rohit3221 said:
I personally think it was just me...but when I installed the apk, and rebooted my phone...it went into a softbrick...Stuck at boot screen...
had to Factory reset my phone....
Anyone else installed it successfully ???
Using kyrillos 5.7 with fugumod ultra 1366mhz kernel
Click to expand...
Click to collapse
cdesai has tested it...mayb some problem u had :/
I think its for video...flash games not work ..try YouTube video works
Doesn't work. I tested with Dolphin, Skyfire, stock browser and with Opera mobile (not mini). It just shut down the browser.
Sent from my ultra fast Galaxy 3
Working fine with here with both dolphin and stock browser. Performance isn't so good though.
katkoriaarpan said:
cdesai has tested it...mayb some problem u had :/
Click to expand...
Click to collapse
did you test it yourself?
rohit3221 said:
I personally think it was just me...but when I installed the apk, and rebooted my phone...it went into a softbrick...Stuck at boot screen...
had to Factory reset my phone....
Anyone else installed it successfully ???
Using kyrillos 5.7 with fugumod ultra 1366mhz kernel
Click to expand...
Click to collapse
its working nice for me thanks for sharing NO FC's lagging here and there but working for me
force close for me :\
kirillos 5.7
sravan.aleti said:
its working nice for me thanks for sharing NO FC's lagging here and there but working for me
Click to expand...
Click to collapse
didnt work for me. it just closes the browser. i tryed with dolphin hd and scyfire.
what rom you use, and is it oc or not.. maybe its something with that.
I could play videos on stock browser in stock froyo due to flash lite-its there in all stock roms
@arpan try it yourself
grrr. force close
for those that worked please add some more details .. ROM version and/or any other drivers installed???
I think it's overclocking that is causing reason. @all those like me which haven't got flash player working. Are you using overclock ROM?
try putting in system app and see if it works or not.
chirayu r u talking about the flash svg player?
Im currently on Sumee 3.0 and some sites like blizzard.com flash is working on their page, but flash games I could not run, and I'm using MIUI default browser Miriam or something like that, nevertheless this is a major breakthrough, from nothing to something
hi,i just bought zte blade, rooted, installed cwm, upgraded to gen 2 using tpt method, and installed CM7, stable 7.0.3, also tried RC1, latest nightly and a few random nighlies
and my problem occurs in all of them.... auto rotate isnt working... IT IS TURNED ON in sttings,tried to turn on of tried to reboot tried to wipe everything tried factory reset nothing helps... and i see im not the first one with this problem but all of the topics started about this issue have 0 replies.. this bug is not stated anywhere in changelogs and in fact it makes CM7 unusable on ZTE Blade.. cause you cant always message and browse and do everything in portrait view... i heard its a kernel issue that every overclock enabled kernel on device upraded from g1 to g2 makes accelerometer or g sensor or w/e you call it stop working.. i really love cm7 and i bought this phone thinking im gonna use it on it and this issue is really frustrating please help someone.. please
Try another ROM like Swedish Spring or Ginger Stir Fry and if it still occurs in those ROM's then it's probably a hardware fault.
same hi
hi there, ive bought my blade 2 days ago, and got the same issue you are talking about, i flashed it to swedish and find out that auto-rotate doesnt work, so ive tried different kernel that should have helped, but istead blade didnt even boot, ive also tried newest CM7 with no luck...kinda desperate and confused that there are just few threads about this and no real solution, thinking of going back to stock froyo, but iam afraid of bricking...if u find any solution write here or on email, ill do the same if i find one, thx
New Blades seem to have different sensor hardware. Try Sensor List from market and compare the results with this screen (from Orange San Francisco bought earlier this year):
db.tt/ms5m4i6
(can't post links)
yes your right, thats the source of the problem, my accelerometer is not the same as yours.. heres the screen tinyurl dot com slash 3tqv26o
now me and other peaople wold like to know if there is a way to modify kernel to work with this hardware... i think cm7 developers should be intersted in resolving this
Gamaqadra said:
yes your right, thats the source of the problem, my accelerometer is not the same as yours.. heres the screen tinyurl dot com slash 3tqv26o
now me and other peaople wold like to know if there is a way to modify kernel to work with this hardware... i think cm7 developers should be intersted in resolving this
Click to expand...
Click to collapse
They're already looking into it.
k0zmic said:
They're already looking into it.
Click to expand...
Click to collapse
didnt know that, people posting about this on CM7 forums dont get much attention
if they really manage to get it to work that will be my uber happy day like when i had wildfire stock 2.2 and alpharevx came out
I also have the same problem, will hit modaco forums n check if there`s something on it.
Can we calibrate those sensor?
Sent from my ZTE-BLADE using XDA App
Got my blade yesterday...auto rotate was working well till i upgraded to gen2 and installed cm7. I have being doing a lot of research on that...so if anyone comes up with a workaround, please inform
P.S i am not uninstalling cm7, thats the best rom i have ever seen
briankariu said:
Got my blade yesterday...auto rotate was working well till i upgraded to gen2 and installed cm7. I have being doing a lot of research on that...so if anyone comes up with a workaround, please inform
P.S i am not uninstalling cm7, thats the best rom i have ever seen
Click to expand...
Click to collapse
Now Brian n the rest, there is no work around on it, tried changing different kernels without success, finally flashed cm7 n installed Ginger Stir Fry, its been 3 days n everything is fine, but remember u`ve already upgraded to Gen 2, so no need of Tpt install, just get the Rom, its also very good at preserving power. with problems hit me up on twitter @alexakams
i also use Ginger Stir Fry because AutoRotation dont work with cm7. its a clean and fast rom, but Elitemovil Blade_Rom is also an option.
Hi,
I've successfully modded my MS2 yesterday using (walter's?) "ms2ginger-rc2". It's been quite easy - I expected it to be much more difficult.
Unfortunately it's impossible to add accounts (app crashs). Therefore I plan to roll back to the sysbackup Imade before with Clockworkmod and to re-mod it with a newer/ better/ more stable variant.
Can you suggest one that you are happy with? I am fine with Blur - it can be included.
Anything to keep in mind for the rollback? Just revert to the backup via the bootloader?
CU,
Meszi.
Sent from my MotoA953 using XDA App
i have tried CM7 and was before using it on BackFlip, but on Milestone 2 i am really loving MIUI its great ROM.
The problem is as i saw no one who is maintaining these CM7 or MIUI rom is not Dev, so i kinda think Milestone 2 can perform better with some optimalisation for it. The reason is as far as Stock Froyo was slow, CM7 and MIUI did not show kinda speed progress or increase i guess it is performing same as stock ROM or maybe little but only little better, on BackFlip there was really dramatic speed change on CM7 but the dev around BF was more active then on Milestone and i am happy with what we have already.
As far as I know, the MIUI is the latest one. But that's just because endles7's ( the guy who is porting CM7 to M2) phone is bricked at the moment.
Both, CM7 and MIUI are great ROMs, but, at least for now, if you're looking for the newest one, then MIUI is the one for.
I believe that CM7 will be supported again soon, there is a movement on the forum to buy endles7 a new one if his is really bricked forever.
I'm using MIUI because o like the interface better.
Hope it helped =)
Upgraded to "ms2ginger 1.1" but still problems with accounts management
Hi,
I reverted to Froyo, reloaded the backup I had done with Clockworkmod, made an app backup using Titanium and re-modded the device to "ms2ginger 1.1". But still there is the same issue with accounts ("Konten" in German): When trying to add an account the app crashes.
I am fine with the rest ... it works far faster than with Froyo.
Is there a way to get accounts/"Konten" work again? Probably by finding it in the Titanium backup and taking the old app or by (re)installing some working .apk?
At the moment I am still very new to this topic ... until last week I still believed in the myth having bought an "unmoddable" device.
I'd try CM7, too ... but if it's possible to have it done with "ms2ginger" I'd at first prefer trying it that way.
Any suggestions?
CU,
Mészi.
after trying cm7, i really prefer MIUI Rom on A953 !
but Cyanogen team will soon release a 2.3.7 Rom ... so we'll see !
Switching from MS2Ginger to CM7 Nightly
Sorry, if it appears to be a dumb question. But at the moment I am still very new to this topic and want to avoid bricking the device by forgetting a thing when switching from "MS2Ginger 1.1" to some CM7 ROM...
When reading the installation steps of the nightly build (http://forum.xda-developers.com/showthread.php?t=1239778)...
*START copy&paste*
[How to Install]:
1. Download all in one update.zip
2. Make sure you have CWM3.x/4.x working. Or download from here.
3. select all in one.zip then apply update.
4. double wipe(if you are coming from previous CM7 version,just wipe cache/dalvik)
5. For CWM4.x, reboot and done.
For CWM3.x, download fixed-sbf and flash it. Then done.
*END copy&paste*
...it's not plain to me if I needed to switch back to the official Froyo or if "updating" with the all in one.zip and wiping the data would be sufficient to get rid of the previous "MS2Ginger". :-/
Any recommendations?
CU,
Mészi.
Do you try with "RSD Lite" software to put the stock Rom ?
and then you do the update to the custom rom ... no brick with this method i think ! but i'm not expert sorry !
buggsbeny said:
Do you try with "RSD Lite" software to put the stock Rom ?
and then you do the update to the custom rom ... no brick with this method i think ! but i'm not expert sorry !
Click to expand...
Click to collapse
That's the question.
If it's not necessary I'd directly load the CM7 ROM using CWM.
But, anyway: As long as I can access the boot loader (PowerOn + Cam + VolDown) I could still revert to the official Froyo if updating to CM7 directly would not work.
I think I just give it a try...
CU,
Mészi.
exactly ... i was afraid last friday while updating my stock rom for MIUI ... my battery goes out !
all day i was thinking that my lovely Milestone was bricked ... but with "rsd lite" i re-install my original froyo ... and then i could re-root it and put the miui version !
last version is perfect ! just the problem of keyboard layout but there is a script who put it back to azerty ...
have a good luck for your update !
++
So you would recommend downgrading to the official Froyo at first? *somewhat confused* :-/
Sent from my MB953 using XDA App
... i don't really know ... just said that for me that was the only way to rescue my bootlooping m2 !
normaly you can update from any rom, just don't forget to clear cache, "dalvik cache" too (don't remeber the name) ...
the best is to do a factory reset before rebooting too ... but it's not always necessary ... from miui 1.09.23 to miui 1.10.8 i don't have to do it ...
they don't talk about it in the related post of your rom ?
Ok, thx. I am gonna just try it wiping the cache and overwriting the ROM. ROM switching is not relly described in the MS2Ginger HowTos. *g*
Will post my results here...
Sent from my A953 using XDA App
Good luck !
Sent from my A953 using XDA App
Worked w/o any problems
Hi there,
I just "updated" my MS2 from "ms2ginger 1.1" to "EndlessCM7_20111001_Nightly_BPSW_v1_0" without any problems.
I can only recommend to check the thread: http://forum.xda-developers.com/showthread.php?t=1239778
Thanks for your replies so far.
CU,
Mészi.
happy to see that it worked !
Problems with CM/ Nightly
Hi there,
I am half-way about to throw it away again.
I installed EndlessCM7_20111001_Nightly_BPSW_v1_0.zip and then EndlessCM7_update_from_111001_to_111004_v1_5.zip and it appeared to work fine.
But I had to recognize an instable Market app, WiFi cannot connect to my access point and the camera app crashes reliably after starting it.
I will post this in http://forum.xda-developers.com/showthread.php?t=1239778 too hoping that these are known issues with known solutions on it.
If anyone of you knows I'd be glad if you threw some suggestions at me.
CU,
Mészi.
O well....
For me, MIUI is workind perfectlly, without any problems.
And, my battery life increased alot with the latest build of it
So i would recommend it.
meszi1977 said:
Hi there,
I am half-way about to throw it away again.
I installed EndlessCM7_20111001_Nightly_BPSW_v1_0.zip and then EndlessCM7_update_from_111001_to_111004_v1_5.zip and it appeared to work fine.
But I had to recognize an instable Market app, WiFi cannot connect to my access point and the camera app crashes reliably after starting it.
I will post this in http://forum.xda-developers.com/showthread.php?t=1239778 too hoping that these are known issues with known solutions on it.
If anyone of you knows I'd be glad if you threw some suggestions at me.
CU,
Mészi.
Click to expand...
Click to collapse
Update: I reverted to the stock ROM and installed the most recent version of EndlessCM7. Now it's working fine.
Details here: http://forum.xda-developers.com/showpost.php?p=18352563&postcount=1382
Thanks for all suggestions. Hopefully this thread will be useful though too for other noobs avoiding the mistakes I did.
CU,
Mészi.
Hi, Michael:
I'd like to have my MS2's battery improved like you said and enjoy Exchange server support as well . Do you know if MIUI rom supports it?
MIUI has Exchange server support and works fine.
Hey guys,
I installed the jellytime v3 rom for acer a500 followed all the steps and it is working great. the only issue i have , and it is really bothering me , is that it restarts just out of the blue when i don't use it and keep it on standby even i am doing some processes like copying files from by usb to the sdcard . so the question is how to fix this issue and if not is there any more stable rom that u advice me to use.
thanks in advance
mahmoud_m_m said:
Hey guys,
I installed the jellytime v3 rom for acer a500 followed all the steps and it is working great. the only issue i have , and it is really bothering me , is that it restarts just out of the blue when i don't use it and keep it on standby even i am doing some processes like copying files from by usb to the sdcard . so the question is how to fix this issue and if not is there any more stable rom that u advice me to use.
thanks in advance
Click to expand...
Click to collapse
I've had this restart problem on several JB ROMS. I am now on Civato's CM10-FLEX_V6Supercharged_Rev2.3_GappsIncl_Public ROM and have NEVER had a reboot/restart issue. Best ROM I've ever run on my a500.
Hi all,
my defy after some attempts is quite perfect :highfive:
I've tried different rom and configuration then I've solved my problems of Battery and fluidity with this step.
Factory Reset
wipe
Flash Rom (Android 4.1.2 Rom: 10-20130918 Get it there (Quarx))
Flash Gapps (Minimal)
wipe
Reboot
Battery Calibration when charged 100%
Nova Launcher
Then i've falled in love with my phone
I hope it will help someone
Good for you. But you did not mention the OS since there are many flavours of 4.1.2 out there. You also did not root it? sorry don't want to be a **** about it, but you are missing some points here.
Also, there is no need to - ever - calibrate battery. After 5 full load cycles it will always be calibrated.
erdnuesse said:
Good for you. But you did not mention the OS since there are many flavours of 4.1.2 out there. You also did not root it? sorry don't want to be a **** about it, but you are missing some points here.
Also, there is no need to - ever - calibrate battery. After 5 full load cycles it will always be calibrated.
Click to expand...
Click to collapse
You are right it's the version of Quarx and it's obviously rooted
The last update is smooth too (20131030). Give it a try :good:
themaker69 said:
The last update is smooth too (20131030). Give it a try :good:
Click to expand...
Click to collapse
I've tried it but i've found it less stable...crash of some app and reboot...
The only problem i've found with the 18 version concern camera...sometimes reboot when i see a video of the gallery.
You did a full wipe before install?
themaker69 said:
You did a full wipe before install?
Click to expand...
Click to collapse
Yes, i've done it before flashing...but i haven't tried it with Nova.
MikBre said:
Hi all,
my defy after some attempts is quite perfect :highfive:
I've tried different rom and configuration then I've solved my problems of Battery and fluidity with this step.
I hope it will help someone
Click to expand...
Click to collapse
It's stable but sluggish. I tried Quarx' 10.2 and SlimBean (JB4.3 based) before and I think they were more responsive.
Usb tethering and wifi hotspot dont work in any version so Im using Easytether and Wifi Tether Tom.
Cheers!
Martin
mt12345 said:
It's stable but sluggish. I tried Quarx' 10.2 and SlimBean (JB4.3 based) before and I think they were more responsive.
Usb tethering and wifi hotspot dont work in any version so Im using Easytether and Wifi Tether Tom.
Cheers!
Martin
Click to expand...
Click to collapse
That! ^