Database Users

How many of us have successfully flash WM6.5

Well
how many of us have successfully flash WM6.5?
is it advisable to flash it?

Personally I am happy with SPB Mobile Shell 3. The I am not interested in another WinMo version until 7, which will need another phone.

GPS performans with WM6.5
Flashed with Tommy34's ROM with WM6.5.
Very happy that my GPS fixing -boring- delay is fully resolved.
I almost believed in my Device have had a hardware defect, then realized it is none..
I have got one single trouble that SKYPE WinMobile v2.5 can not be installed..
I will try v3.0 Beta ASAP I am able to download..
***Edited***
Beta v3.0 works out..

I installed tommy34 cHome 0.4 ROM and I'm very happy with it. My gps finally works too...and the phone is more response in general.

i have used
hi
i have used ironeagles,tommy34 & right now using Pdaviet 6.5ROM V07
Which i have posted today at the Jade Rom development
all are working fine and no problem at all for me

Hy everyone,
i'm using the ironeagles version and it's working really smooth.

erm
can anyone be kind enough to make a video tutorial on how to flash the rom?
i really wan the WM6.5 rom but i really have no idea how to do it

redsuns said:
erm
can anyone be kind enough to make a video tutorial on how to flash the rom?
i really wan the WM6.5 rom but i really have no idea how to do it
Click to expand...
Click to collapse
try reading this post:
http://forum.xda-developers.com/showthread.php?t=514406
good luck!

@redsuns have u dont HSPL
hi
first u need to do ur HSPL a tute is given in the jade rom development section
read the same and do it as u cant flash cooked ROMs without HSPL
but remember if u do it u will lose ur warranty
once u have done the same Flashing is very easy
if u cant understand i will give u details but first get ur HSPL done OK
redsuns said:
erm
can anyone be kind enough to make a video tutorial on how to flash the rom?
i really wan the WM6.5 rom but i really have no idea how to do it
Click to expand...
Click to collapse

haree said:
hi
first u need to do ur HSPL a tute is given in the jade rom development section
read the same and do it as u cant flash cooked ROMs without HSPL
but remember if u do it u will lose ur warranty
once u have done the same Flashing is very easy
if u cant understand i will give u details but first get ur HSPL done OK
Click to expand...
Click to collapse
eek
i dun wan to lose my warranty
maybe i should drop the idea
thanks anyway

@redsuns
hi
Yes it if scared u don't do it for ur info my phone is new too around 2 weeks old but i did it on the third day
redsuns said:
eek
i dun wan to lose my warranty
maybe i should drop the idea
thanks anyway
Click to expand...
Click to collapse

I have not been able to flash my phone.
I am using Vista and when I try and flash the rom on the phone, I get:
Vista has found new hardware (I think it was a CDMA Driver)

I've flashed WM6.5 (can't remember which version I used), and I thought all was going well, until I tried to sim unlock it. The phone is 2 months old, with Orange branding, and had the horrible Orange Unique Manager, which is why I wanted to flash the phone, and I assumed the phone was simlocked. After I flashed it, I bought a Sim Unlock Code, but when I put a 3 sim card in, I didn't get the expected "Enter SIM Unlock Code" prompt. Instead I just get "No Service" displayed on the home screen with the exclaimation mark at the top where the signal strength is displayed. I've also tried with an (active contract) T-mob Sim, and a Tesco Mob Sim. Same thing, I don't get the prompt to be able put the unlock code in.
I can't help thinking it's because I've flashed the phone, it seems like there's something preventing the Enter SIM Unlock Code dialog from coming up. Is there anyone else with this problem, or a solution? What ROMs are people using that they have sucessfully SIM unlocked their phones with?
Thank you!

So does it still work with an Orange Sim?

I have flashed my Orange UK Jade with various flavours of WM6.5, all with good results, currently using a version cooked by PDAVIET, with no issues.

Guys, is it possible to flash to Windows 6.5 then flash again to 6.1 if all doesn't go well?

just wondering but are PDAVIET, Ironeagle and Tommy34s version of wm 6.5 all have 8gb micro sd support. And also which would you recommend as the best.

I flash 6.5 German and ist is working grate.
I used
Jade_LeanCut_GER_WM65_5.2.23001_OEM_2.33.721.1
Installed
2DManila_1_20_19131530_00
And MUI 407 files from erviuskitchen german kittchen.
And installed only th programms that i need.
Only i need Thai caracters in sms. It is not possible to change the thaom font to a full wich Asiatic caracters. installed msss.tff and change all to it, but manila sms does not take care about font change in sms/messages...
I tryed to coock a rom usin erviuskitchen german kittchen wich only changing tahoma font. but all roms i cooked with it are getting instable after 2 dayes. My favorite navigation system wich german and Asien maps does not start afer 3 times anymore.
Si i stick nearly fully satisfyed with the Jade_LeanCut_GER_WM65_5.2.23001_OEM_2.33.721.1

Hi,
I got my HTC since 2 mounth, and i really want to test WM6.5, but i must say that i'm a little afraid about flashing my phone.
I've read the "flash for n00bs" post, and it seems that there is a way to "flash-back" your phone to a factory version, am I right...?
By the way, if i want to use my waranty, can i "flash-back" my phone ?
Sorry for my bad english, thanks guys !
Eizig from France

Hello,
I am from Brazil and bought my Touch 3G about two months ago. It came with WM 6.1.
Last week I successfully applied the "Hard SPL 2.33 by Olinex" and then Flashed it with "Touch3G__WM6.5__2_33_721_17__B23033_WWE" ROM from PDVIANET.
Everything is running fine. The only comment is that we really need to disabled the 3G (H) network and run just with Edge (E) in order to save some battery. Other than that I recommend everybody to upgrade to WM 6.5
Fleck

Problems with phone

I haven't used my Touch HD in a very long time and when I turn it on now (dont remember what happened) it says upgrade ROM code error please try again. Does HTC have an upgrade for it? I live in the US and their site doesn't show anything about the phone, used europe site but gave me a no updates for that serial number. I am guessing that a stock ROM from HTC would fix this problem as the phone is not unlocked.

Shipped roms can be found here. Hope this helps.

If you receive "Upgrade ROM code error" then you will need to flash original stock rom which was on your device, i.e. not any stock rom but the original one. Your original stock rom should flash whether it says 'usb' or 'serial' at bottom of bootloader.
Link to stock roms has been provided in post above

Thanks
Thanks a lot, I haven't used that phone for probably a year so I hope that fixes it. I cannot wait to use that phone again, since I paid good money for it.

Hallo.
I flashed the Energy.BLACKSTONE.29020.Sense2.5.GER.Cookie.2.0.Touch.Of.Glass.Jun.02.
Now the phone find no connect.
I use an HTC BLACKSTONE.
I hope you can help me.
Sorry for my bad english.
Best regards
Matthias

make007 said:
Hallo.
I flashed the Energy.BLACKSTONE.29020.Sense2.5.GER.Cookie.2.0.Touch.Of.Glass.Jun.02.
Now the phone find no connect.
I use an HTC BLACKSTONE.
I hope you can help me.
Sorry for my bad english.
Best regards
Matthias
Click to expand...
Click to collapse
Did you follow this guide and put either USPL or HSPL on your device first?
Before flashing anything, its always best to read the stickies (thread stuck at top of each forum which provide guides, references etc). My advice would be to read this

Rom upgrade for HD2 from o2 (UK) - won't let me!!!

Hi guys, anyone know the way to overcome this?
How to upgrade to a higher ROM?
Even HTC's website won't let me downloading the ROM saying that the upgrade aren't for this device!!!
Please!
p.s. sorry I'm new to winmo...
regards!

use a gold card in sd slot or just install HSPL first

wtf is a gold card? i keep seeing people refer to it but never what it is, i imagine its a sim card with a toffee penny wrapper stuck to it lol

http://forum.xda-developers.com/showthread.php?t=591314
Basicly its a sd card with its unique serial number run though some software but as its no longer free just use hspl if you dont have a goldcard.

Forget about the goldcard, you don't need one so long as you have a copy of the original rom available, which you do. Hunt it out in the official roms forum. First post, first link, 1.43 section, its listed there. Thats your backup, then instal hspl and you can flash what you like.

Your HD2 is locked to o2 (UK) ROMs only so you cant put any of the official HTC ROMs or any of the custom ROMs from the "HD2 ROM Delvelopment" forum
http://forum.xda-developers.com/forumdisplay.php?f=534
because of this your always be running out of date software as the phone operators are always so slow at releasing updates if they do at all.
BUT if you download HSPL from the above forum thread "[HSPL] HowTo flash everything"
http://forum.xda-developers.com/showthread.php?t=611433
and install it to your phone your then be able to put on any ROM you like. Don't worry its near impossible to muck anything up and you can always put the phone back to its original rom, just do a little reading if your still not sure.

Great Guys! HSPL helped!!! I've upgraded...shame I can't manage to download Rom 1.66 as it always crashes and the download in general is sooo slow (not the internet issue)...but maybe with a bit of patience I'll get it at the end!
Cheers once again!!!

essensial said:
Hi guys, anyone know the way to overcome this?
How to upgrade to a higher ROM?
Even HTC's website won't let me downloading the ROM saying that the upgrade aren't for this device!!!
Please!
p.s. sorry I'm new to winmo...
regards!
Click to expand...
Click to collapse
HTC have now listed a new ROM upgrade (1.72.206.3 released 27/04/10) for the HD2 on their UK support website (htc.com/uk)
Let me know how you get on with it as when I enter my o2 serial number I still get the error message you mentioned. I have sent a message to HTC support...just waiting for a reply.

shutty2k3 said:
HTC have now listed a new ROM upgrade (1.72.206.3 released 27/04/10) for the HD2 on their UK support website (htc.com/uk)
Let me know how you get on with it as when I enter my o2 serial number I still get the error message you mentioned. I have sent a message to HTC support...just waiting for a reply.
Click to expand...
Click to collapse
all you o2 guys that cant down load have been able to get 1.66 from htc's site for months now this rom is purley for the forgoton few (like me) who got the phone as o2 launched and locked down (no wifi router etc) I ran this rom for a day and it nice and snappy fast but its still not wm 6.5.3 so i am back on touch-x again now the 2.07 radio in the o2 rom was quite ok in my area when I used it a few months ago but the 2.10 in my opionion is a match for recption with better battery life just my 2 cents hope it may help some of you

What about Virgin Mobile? Will they get a Rom Upgrqade???? they seems to have been left out of the loop even though they were the first (technically second) carrier of the phone.

How to Hack SPL 1.24

Hi All,
After spending a large amount of time trying to find a solution for the SPL 1.24 to hack. Mainly the Telstra Australia WM6.5 Upgrade. Combining the many efforts of XDA Members I finally got a proper working hack going. I thought I'd post it straight away for the rest of the world to see.
First what you need to do is download the WM6.5 Upgrade from the HTC Website. When you open this you need to go to Start - Run - Type %TEMP% Find the location where the extractor has dumped the files and rename RUU_Signed.nbh to MAPLIMG.nbh. Copy this to the root of the SD Card. Reset your phone into Bootloader and let the flash start. It will fail at 10% than reset itself and install it properly.
From here you need to download a cab clearsecurity.cab which is suppose to be for the Samsung Blackjack 2 but it enables the HTC Snap to be hacked.
From there download the desired Custom Rom and run 1.19 auto.bat and watch the screen go black and the custom rom install.

Any Success???
Hi, can anyone let me know if they have had the same success???

Hi Roger,
Thanks for the post as it worked a treat for me, I was able to flash the HTC Snap after following the above steps. One thing I didn't do is backup the Telstra spl 1.24, Do you know where I can get a copy from?
Once again thanks for the post.
Mr.D

THis looks great. I'd love to try this now, but before I do, I'm hoping you might be able to answer a question of mine, to ease my mind:
If you need to reinstall the original Rom and SPL 1.24, is there any way the the Telecom company can see that the phone's firmware has been previously changed?
Thanks.

Flashing back to Telstra 6.5 Rom
Hey guys, I believe you can just download the latest 6.5 Telstra Rom for the snap from the HTC website. I havern't tried it since I have hacked the phone and the only reason why you would obviously do it is for warranty. Actually I also found out that you can get WM 6.1 rom but you need to contact HTC and you can upload it from there FTP. Sorry I can't provide any more assitance maybe when my phone breaks and I need to flash it back I will post up what I have done.

Hi Roger
Thanks for the reply. This is what's stopping me from trying to flash the ROM. Knowing whether I can restore it back to it's original condition without the telecom company knowing it's been flashed. The phone is only new and if it does develop a hardware problem and I had to send it back, I'm sure they won't fix it under the warranty if they can see that it's been flashed.
If as you suggest, it's just a matter of re-flashing it with the original rom, then that's fantastic. But, I'd really like some firm confirmation before going ahead.
The ROM developed by ookba looks AMAZING and I can't wait to try it.
Thanks.

Flashing Advice
Hi Badcam,
I have owned many HTC phones and I have to say the Snap is probably the most durable out of them all. I find with the Snap and the newer models of the HTC phones from australian carriers they really lock them down and you don't get the full functions as what you pay for. Worst of all they infest the phone with all these carrier features that are not needed.
It is really your choice flashing your phone. Every single phone I have had I have flashed and never had problems only when I drop them lol. For warranty purposes you can always flash back to orginal rom and just tell them thats how you got it. They really can't say much. But I did abit of reading and when you do upgrade the rom from HTC website it does install SPL 1.24 back meaning if you want to flash it back you need to go through the hack again.
Hope this has been helpful.

You said it Roger.
There's so much Telecom rubbish on this phone, it's not funny.
Well, I'll give it a go this weekend. If you're happy it's going to work, I am too. Thanks very much for your advice.

Hey do you guys know how much (in USD) a Telstra SNAP is out there if you buy it outright? Can can anyone ship me one to the States?

What about a TelecomNZ one?
http://store.telecom.co.nz/mobile/pay-monthly/htc-s523
NZ$499.00 is around US$361
http://www.xe.com/ucc/convert.cgi?Amount=499.00&From=NZD&To=USD&x=16&y=17
I'd be happy to sort something out for you. PM me if you'd like.
(Sneaks off to check profile to see if it's switched on...)

Badcam said:
What about a TelecomNZ one?
http://store.telecom.co.nz/mobile/pay-monthly/htc-s523
NZ$499.00 is around US$361
http://www.xe.com/ucc/convert.cgi?Amount=499.00&From=NZD&To=USD&x=16&y=17
I'd be happy to sort something out for you. PM me if you'd like.
(Sneaks off to check profile to see if it's switched on...)
Click to expand...
Click to collapse
Thanks but that's kinda rough. I get the MAPL100 (Dash 3G) here for $100. Looking to get a SNAP S523 for around that, even used. Let me know if you run across one. Thanks!

It's atrocious. Believe it or not, that's a good price. It's just come down NZ$200. Of course, I had to buy my two days before the reduced it.
I'll keep an eye out.

roger.higginbotham said:
Hi, can anyone let me know if they have had the same success???
Click to expand...
Click to collapse
Hi, can anyone tell me how to get the device into bootloader mode? i have followed the steps, but getting it into bootloader mode and then letting it hardspl from the sd is not happening :-( THANKS!!!

Can't find clearsecurity.cab. Can anyone tell me where to find it?

Attempt to answer questions lol
Benzin,
Type in google "clearsecurity.cab download" and find the mediafire link
If you have problems please let me know. Maybe XDA-Developers already have it posted.
wcampagne,
So you are getting into bootloader right, its just not picking up the MAPLIMG.nbh file. You have renamed RUU_Signed.nbh to MAPLIMG.nbh. Also a train of through if you have tried applying previous Roms before hand I suggest you go to %TEMP% file and remove anything that is there that has reference to RUU_Signed or the rom at all. You are probably uploading the wrong file as it might be cached. As I said its just a train of thought. If you have any more problems please feel free to post up and I will figure out a fix for you.
Ookba,
Ebay is your best bet. I got my handset for $150 AUD brand new on bid.

Works great for me and I thank you so much!

Installing stock rom on branded t-mobile DHD

Hello,
I just got myself a new Desire HD from eBay to replace my HD2. Unfortunatly when I got it it was branded to t-mobile even though auction said it was new, sealde and unlocked.
I have managed to permroot it. What do I need to do now? I tried to run the HTC latest firmwas for this device and comes up with error131 wrong customer ID.
My knoledge is very basic about this so any help would be grateful.
Thanks
Robert

If the phone wasn't as described then return it. Was it sealed in its box?
Can you make & receive calls?
If your trying to flash a Stock HTC ROM over a T-Mobile branded/locked DHD you will get an error.

Hi thanks for reply.
Yeah the phone did not say in auction that it wasbranded just unlocked and sealed. When I got it I could see that it had been opened as the tape that was used to seal the box wasn't sticky anymore and it had been inserted the wrong way round. It has obviously been opened to unlock it.
As the phone is unlocked I thought I thought I would be able to flash any stock rom onto it that is avaliable. I really don't want t-mobile logos on startup and there apps when I have a vodaphone sim.
Thanks again.

If you want a generic HTC ROM you will need to root & S-OFF your DHD. Guides are available in the Dev section.
If you need any help just let us know. There are quite a few friendly people round here.

Hay thanks for the reply !!
I managed to do the permroot thing. I was reading up on anything I had to do else. Which guide would you recomend to do the S-Off? Can I just run the HTC.exe rom then to install it?
I was also reading up on something called supercid do I need to do this as well?
Thanks so much!! It saves me loads of hassle trying to return it. That and am phoneless without it at the moment lol
Robert

Hello
Would just like to say thanks I managed to get the stock HTC rom on the DHD thanks too the help on here.
Was just curious do I need to reactivate the S-OFF to go back to S-On i presume? If I did that would I still be able to install new stock roms when they come out now there is a stock rom on phone?
Thanks so much again. This phone is great Android is so much better supported that Windows Mobile!
Robert

00_Angelos_00 said:
Would just like to say thanks I managed to get the stock HTC rom on the DHD thanks too the help on here.
Robert
Click to expand...
Click to collapse
No problem at all.
If you flashed the Stock HTC ROM from the RUU, then it will have Security On (S-ON) If you want to flash a custom ROM, then you will need to go through the whole procedure again, but flash a custom recovery (Clockwork Mod), to make the the whole process safer and easier.