hey all!
I guess someone else has experienced this:
I updated to the last available beta 2.3.5 from huawei, rooted, installed cwm 5.5.0.4, followed the guide for upgrading to aurora,(including wiping cache etc.) but im stuck on aurora boot screen. any suggestions?
EDIT:removed the battery, wiped user data again, and installed the upgrade again. SOLVED-WORKS PERFECTLY=)
Related
My Iconia has CWM installed. I used it a while ago to install the leaked ICS rom. I tried to install the most recent (official) ICS rom. Now my Iconia will not boot past the Iconia logo. I've loaded CWM and formatted everything and reinstalled the official rom. No go.
I figure at this point I have to use nvflash to install a new recovery image and rom. Could somebody tell me how to do that and what files to get?
Thanks
Before doing anything else have you tried wiping cache and data? Has worked for me when a rom wont boot. Have you still got cwm can you access it? If no cwm you can accomplish this by holding power and volume up then toggle the rotation lock.
Yes, I have access to CWM. I have tried wiping everything. I even successfully installed a new rom. The device still will not boot past the Acer logo.
I booted wit hte method you described. Two messages appeared in quick succession, "Clearing data..." and "Clearing cache". After the cache message, the device just sits there doing nothing at all.
Previously I had the data partition encrypted. Could that be causing trouble?
did you install an ICS bootloader?
I'm not sure. That is why I created this thread. I'm looking to get the recovery and OS image necessary to get this device working again.
As the previous poster noted, have you switched to the ICS bootloader? When I flashed my A500 with an ICS rom it too got stuck in a bootloop. I then discovered that I actually had to flash the ICS bootloader berfore installing the new rom.
vangorra said:
My Iconia has CWM installed. I used it a while ago to install the leaked ICS rom. I tried to install the most recent (official) ICS rom. Now my Iconia will not boot past the Iconia logo. I've loaded CWM and formatted everything and reinstalled the official rom. No go.
I figure at this point I have to use nvflash to install a new recovery image and rom. Could somebody tell me how to do that and what files to get?
Thanks
Click to expand...
Click to collapse
You can't install official ROM with CWM. You need Acer recovery! This issue has been answered several times. Use search button!!!
I rooted my phone and installed the cyan fox rom in December and it was working flawlessly, but yesterday it would randomly shut down and then get stuck in a boot loop or wouldn't boot up. So i installed a stock rom and there are no problems with that. Today I installed cyanogen mod on now the problem is coming up again. I have tried wiping dalvik cache, factory resting and that doesn't seem to do much.
Razorbrick said:
I rooted my phone and installed the cyan fox rom in December and it was working flawlessly, but yesterday it would randomly shut down and then get stuck in a boot loop or wouldn't boot up. So i installed a stock rom and there are no problems with that. Today I installed cyanogen mod on now the problem is coming up again. I have tried wiping dalvik cache, factory resting and that doesn't seem to do much.
Click to expand...
Click to collapse
Install Stock Rom again or ask in Cyanogenmod community
Recovery
What recovery are you using? Is it the latest version?
Was on cloudy's latest gpro2 rom with dorimatrix 4.8.1, updated to 4.9 and wiped cache and dalvic cache and upon first boot everything I would click force closed after a minute or so so I attempted rebooting. It would then go into a bootloop. I adb rebooted into recovery, wiped the caches, and flashed 4.8.1. It now did the same thing as it did before, followed by a bootloop when I rebooted it. Decided to try flashing to a different rom, so I did a complete backup and sent over the latest CM11 nightly. Wiped all and flashed, and now I'm bootlooping at the CM screen with no recovery access.
I remembered when I was already bootlooping that I needed to flash the 4.2.2 partitions to use an AOSP roms. A little too late huh. Now I'm stuck at the CM bootanimation and no ADB. Are my only options to use mobile odin and start over from or can you guys come up with something else?
mejorguille said:
Was on cloudy's latest gpro2 rom with dorimatrix 4.8.1, updated to 4.9 and wiped cache and dalvic cache and upon first boot everything I would click force closed after a minute or so so I attempted rebooting. It would then go into a bootloop. I adb rebooted into recovery, wiped the caches, and flashed 4.8.1. It now did the same thing as it did before, followed by a bootloop when I rebooted it. Decided to try flashing to a different rom, so I did a complete backup and sent over the latest CM11 nightly. Wiped all and flashed, and now I'm bootlooping at the CM screen with no recovery access.
I remembered when I was already bootlooping that I needed to flash the 4.2.2 partitions to use an AOSP roms. A little too late huh. Now I'm stuck at the CM bootanimation and no ADB. Are my only options to use mobile odin and start over from or can you guys come up with something else?
Click to expand...
Click to collapse
Fixed it... realized I still had recovery active, booted into it with the button combo, wiped, installed cloudy pro, all is good.
Ok so i recently tried to upgrade my nexus 4 to 4.4 paranoid android and when i went into CWM and flashed it it said error, so i cleared the cache and everything then i reflashed the previous version (like 4.2) i used to have and then flashed the gapps, but now everytime I hit reboot it reboots again and then goes to cwm again and i really have no idea to fix help. Help plz.
Update your recovery and if this doesnt help try it with a different recovery
Hello People! so here is my case.. i followed this specific Guide to the letter http://forum.xda-developers.com/showthread.php?t=2792022 from a stock Hc Rom/recovery to kit kat used blackthund3rs Flash tool to flash Skrilax_CZ's bootloader and everything went smooth i managed to flash Cwm 6.0.4.5 on secboot without problems too but after i installed the Omnirom i forgot to do a factory reset i just cleared cache and dalvik cache after that the tablet wont boot to the rom it just shows the android logo and then resets by it self problem is that i cant even do a wipe/factory reset through cwm in secboot it just freezes and restarts again tried to install the omnirom again from the zip is gone from sdcard!!! oO along with everything else i guess i can see only 3 folders 0 the clockworkmod one and obb thing is i got the cpuid and sbk number also stock recovery is there. so what happens next? any help will be really appreciated!
ps. Sorry for my long and painfull to the eye post!
Devilhanzo said:
Hello People! so here is my case.. i followed this specific Guide to the letter http://forum.xda-developers.com/showthread.php?t=2792022 from a stock Hc Rom/recovery to kit kat used blackthund3rs Flash tool to flash Skrilax_CZ's bootloader and everything went smooth i managed to flash Cwm 6.0.4.5 on secboot without problems too but after i installed the Omnirom i forgot to do a factory reset i just cleared cache and dalvik cache after that the tablet wont boot to the rom it just shows the android logo and then resets by it self problem is that i cant even do a wipe/factory reset through cwm in secboot it just freezes and restarts again tried to install the omnirom again from the zip is gone from sdcard!!! oO along with everything else i guess i can see only 3 folders 0 the clockworkmod one and obb thing is i got the cpuid and sbk number also stock recovery is there. so what happens next? any help will be really appreciated!
ps. Sorry for my long and painfull to the eye post!
Click to expand...
Click to collapse
We have similar problems man!
http://forum.xda-developers.com/iconia-a500/help/help-a500-brickedi-t3080673