Odin failed - Galaxy Note GT-N7000 General

so i got my international note today (love it by the way) however when i try to downgrade to root it tries to flash the factoryfs file and just turns red saying FAIL
any ideas why? =/

samtruongg said:
so i got my international note today (love it by the way) however when i try to downgrade to root it tries to flash the factoryfs file and just turns red saying FAIL
any ideas why? =/
Click to expand...
Click to collapse
Are you using a firmware from your region? If not, that could be it.
Sent from my GT-N7000 using xda premium

try this...
samtruongg said:
so i got my international note today (love it by the way) however when i try to downgrade to root it tries to flash the factoryfs file and just turns red saying FAIL
any ideas why? =/
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1424997
Yea, I read the above link a ba-jillion times over and over until I understood what was going on and flashed it successfully the first time. I got lucky but try following the instructions in the link provided above and good luck!

thegregulator said:
Are you using a firmware from your region? If not, that could be it.
Click to expand...
Click to collapse
It absolutely has nothing to do with the firmware being for some other region. It could be for Mordor region, and it should still install without issues.

chasmodo said:
It absolutely has nothing to do with the firmware being for some other region. It could be for Mordor region, and it should still install without issues.
Click to expand...
Click to collapse
Not true, at least from my experience. I tried to flash firmware from the UK on my note from India and it failed. Maybe I should try the Mordor firmware...
Sent from my GT-N7000 using xda premium

Related

Help with AT&t Galaxy Tab

Hey guys. I am in that other download mode with the exclamation and cell and pc image. Is there anyway I can get out from there. I tried searching for the stock firmaware and all but I can not find any.
I have the AT&T versions.
Thanks in Advance.
http://forum.xda-developers.com/showpost.php?p=10302235&postcount=10
It said that this is still a download mode and you can use Odin
So either grab GB Stock Safe from teamovercome site or go to samfirmwares to get a firmware for your device and use Odin to flash it.
priyana said:
http://forum.xda-developers.com/showpost.php?p=10302235&postcount=10
It said that this is still a download mode and you can use Odin
So either grab GB Stock Safe from teamovercome site or go to samfirmwares to get a firmware for your device and use Odin to flash it.
Click to expand...
Click to collapse
Can you give me links please
Sent from my SGH-T989 using XDA App
http://lmgtfy.com/?q=teamovercome
http://lmgtfy.com/?q=samfirmwares
priyana said:
http://lmgtfy.com/?q=teamovercome
http://lmgtfy.com/?q=samfirmwares
Click to expand...
Click to collapse
LOL.. Thanks...
http://www.teamovercome.net/p1000/?page_id=21
But How do I know which modem to download. The restock package is what I have to download, or is that the only thing?
ysuleman said:
LOL.. Thanks...
http://www.teamovercome.net/p1000/?page_id=21
But How do I know which modem to download. The restock package is what I have to download, or is that the only thing?
Click to expand...
Click to collapse
Never Mind figured out what to download.
priyana said:
http://lmgtfy.com/?q=teamovercome
http://lmgtfy.com/?q=samfirmwares
Click to expand...
Click to collapse
Ok I followed the instructions on that website but I am stuck at the At&T logo. Any Ideas?
Try restock again.
It is straight forward Odin. Are you stuck at restock?
priyana said:
Try restock again.
It is straight forward Odin. Are you stuck at restock?
Click to expand...
Click to collapse
Ya I used Odin and followed instruction but it doesn't passt the att logo
Sent from my SGH-T989 using XDA App
I read one guy solve his issue using One Click Unbrick
http://forum.xda-developers.com/showthread.php?t=1153310
care to try that?

Latest modem.bin XXAME1-update [CWM]

Update zip for latest XXAME1 modem.bin (i8190 XX region only)
If you want latest modem without changing rom.
Works fine on stock rom and CM10.1
Flash with your custom recovery.
GT-I8190_modem.bin-XXAME1-update.zip
Also added DXAMB1 (i8190 DX region only)
GT-I8190_modem.bin-DXAMB1-update.zip
Thanks to enox.co for updater script.
Should be noted this not for the N or L series. I found that out hard way :banghead: lol
Sent from my GT-I8190 using xda premium
pedst said:
Should be noted this not for the N or L series. I found that out hard way :banghead: lol
Sent from my GT-I8190 using xda premium
Click to expand...
Click to collapse
Bootloop or only N didn't work?
stenc55 said:
Bootloop or only N didn't work?
Click to expand...
Click to collapse
Soft brick, no recovery, had to pull battery get download mode and reflash via odin, d'oh :good: Will be checking file 1st next time
pedst said:
Soft brick, no recovery, had to pull battery get download mode and reflash via odin, d'oh :good: Will be checking file 1st next time
Click to expand...
Click to collapse
Gaah! Sorry 'bout that. It suprised me that it got softbricked with no recovery, as it doesn't touch recovery partition.
tys0n said:
Gaah! Sorry 'bout that. It suprised me that it got softbricked with no recovery, as it doesn't touch recovery partition.
Click to expand...
Click to collapse
Not your fault lol we do these things at own risk :good:
pedst said:
Not your fault lol we do these things at own risk :good:
Click to expand...
Click to collapse
Yeah you're right, but as you wrote..I could have pointed out it was for i8190 only.
It's done now so I hope no one else find it out the hard way :good:
Anyway thanks for reporting. Now I have to flash a i8190N modem to my i8190 to see what happens :laugh: haha
tys0n said:
Yeah you're right, but as you wrote..I could have pointed out it was for i8190 only.
It's done now so I hope no one else find it out the hard way :good:
Anyway thanks for reporting. Now I have to flash a i8190N modem to my i8190 to see what happens :laugh: haha
Click to expand...
Click to collapse
Haha good luck, odin and firmware on standby :laugh:
pedst said:
Soft brick, no recovery, had to pull battery get download mode and reflash via odin, d'oh :good: Will be checking file 1st next time
Click to expand...
Click to collapse
Did the same with enox ROM. Had phone for 4 hours and went straight to softbrick :angel: You can see my signature, that's from softbricking SGS more than once.
Oh, the perils of being flash junkie
I've got some network issues with my S3 mini. From time to time it disconnects itself from the network - no mobile internet, no incomming/outgoing calls, no nothing. Signal indicator is full, but the phone works only after restart or airplane mode on and off. There's a thread about this issue: http://forum.xda-developers.com/showthread.php?t=2057285&page=5).
I run stock ROM, no root, no customizations. I'm wonreding can I install this radio on it and may it resolve my problem?
My current firmware details:
AP: XXAMD3 ; CP XXAMD3, CSC: OOXFAMD1
tsurko said:
I've got some network issues with my S3 mini. From time to time it disconnects itself from the network - no mobile internet, no incomming/outgoing calls, no nothing. Signal indicator is full, but the phone works only after restart or airplane mode on and off. There's a thread about this issue: http://forum.xda-developers.com/showthread.php?t=2057285&page=5).
I run stock ROM, no root, no customizations. I'm wonreding can I install this radio on it and may it resolve my problem?
My current firmware details:
AP: XXAMD3 ; CP XXAMD3, CSC: OOXFAMD1
Click to expand...
Click to collapse
Yes it should be fine to flash but I can't say if your problem will be fixed.
You need root to flash this and I think your PDA, PHONE and CSC won't match correctly anymore, for kies or ota to give you updates.
You can still update manually with odin tho, when new fw for your country arrives.
tys0n said:
Yes it should be fine to flash but I can't say if your problem will be fixed.
You need root to flash this and I think your PDA, PHONE and CSC won't match correctly anymore, for kies or ota to give you updates.
You can still update manually with odin tho, when new fw for your country arrives.
Click to expand...
Click to collapse
if anyone wants the XXAMG1 modem update let me know and I will upload it
efaustino84 said:
if anyone wants the XXAMG1 modem update let me know and I will upload it
Click to expand...
Click to collapse
I already made a post with XXAMG1 In development section
Sent through time and space from my s3mini/CM10.1
ok cool
Can I flash this to the L version?.
Sir_gpm said:
Can I flash this to the L version?.
Click to expand...
Click to collapse
No, but you can flash latest i8190L modem from here

Noot Booting

I tried to update via odin 3.07 got the attached images error.
after that when i restart the phone shows the error.please help me to fix this, even now it's not booting on recovery mood.Please someone help me.
Do you have kies installed??
ROMANTiC KiD said:
Do you have kies installed??
Click to expand...
Click to collapse
yes i have please tell me how to fix.
sumonfd said:
I tried to update via odin 3.07 got the attached images error.
after that when i restart the phone shows the error.please help me to fix this, even now it's not booting on recovery mood.Please someone help me.
Click to expand...
Click to collapse
When you ran Odin did you 'run as administrator'?
Also re-download the file you were trying to flash and check the MD5sum. Then try again
Your using the wrong file ....you need mdc or mf9 file....and your using mga wich is not for the sprint version
Yeah didnt caught that damn. You could totally brick your phone with that file.
Sent from my SPH-L720 using xda app-developers app
LIL_ROOKIE said:
Your using the wrong file ....you need mdc or mf9 file....and your using mga wich is not for the sprint version
Click to expand...
Click to collapse
Paperweight time...
Not really! Go here http://forum.xda-developers.com/showthread.php?t=2258107 , pick your flavor and use Odin V3 1.85, run as admin. It may take 2 tries, but will be back to stock.
Sezmar said:
Not really! Go here http://forum.xda-developers.com/showthread.php?t=2258107 , pick your flavor and use Odin V3 1.85, run as admin. It may take 2 tries, but will be back to stock.
Click to expand...
Click to collapse
My phone model is S4 I9505
sumonfd said:
My phone model is S4 I9505
Click to expand...
Click to collapse
Where you able to get it to work?
Sent from my SPH-L720 using xda app-developers app
sumonfd said:
My phone model is S4 I9505
Click to expand...
Click to collapse
So to confirm, you're NOT using a Sprint SPH-L720 but instead an international I9505, correct?
And are you using the most current version of the stock tar or same that you last had on there?
garwynn said:
So to confirm, you're NOT using a Sprint SPH-L720 but instead an international I9505, correct?
And are you using the most current version of the stock tar or same that you last had on there?
Click to expand...
Click to collapse
Updated stock rom, but now the problem is IMEI & Baseband is unknown.

Cannot flash stock firmware??

Hey all ive been trying to flash my orginal firmware for my galaxy s4 at&t i337. Ive been using odin 3.07 but I keep having a fail to complete error. It boots up fine and I attempted to root it but it seems like it works but I run root checker and it tells me that it has rooted incorrectly. A lot of other people have been saying that samsung block this exploit in 4.2.2 and im basically screwed till the new update comes out. Ive tried everything, help would be appreciated
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
joearvelo1987 said:
Hey all ive been trying to flash my orginal firmware for my galaxy s4 at&t i337. Ive been using odin 3.07 but I keep having a fail to complete error. It boots up fine and I attempted to root it but it seems like it works but I run root checker and it tells me that it has rooted incorrectly. A lot of other people have been saying that samsung block this exploit in 4.2.2 and im basically screwed till the new update comes out. Ive tried everything, help would be appreciated
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I think that's the wrong odin i think it's 1.85 or something like that you need
jaythenut said:
I think that's the wrong odin i think it's 1.85 or something like that you need
Click to expand...
Click to collapse
3.07 works too since it has compatibility with all devices that work with 1.85 and dev recommends to use v3.07...
kingzain900 said:
3.07 works too since it has compatibility with all devices that work with 1.85 and dev recommends to use v3.07...
Click to expand...
Click to collapse
I've tried both and get nothing but a fail here's this mornings attempt on Odin v1.85, if I got the wrong firmware please let me know, I don't think I do though...
joearvelo1987 said:
I've tried both and get nothing but a fail here's this mornings attempt on Odin v1.85, if I got the wrong firmware please let me know, I don't think I do though...
Click to expand...
Click to collapse
You're not supposed to decompress the tar file.
You need to flash the xxxxxxx.tar
kingzain900 said:
You're not supposed to decompress the tar file.
You need to flash the xxxxxxx.tar
Click to expand...
Click to collapse
What do you mean by decompress? Unzipp?
joearvelo1987 said:
What do you mean by decompress? Unzipp?
Click to expand...
Click to collapse
Exactly
sajlence said:
Exactly
Click to expand...
Click to collapse
No good, different fail error this time. Fail(auth) ??
joearvelo1987 said:
No good, different fail error this time. Fail(auth) ??
Click to expand...
Click to collapse
Were you on mf3 firmware? If you were Odin is not going to work

[Q] Help Please, stuck in odin mode and "software not recognized by AT&T "

[Q] Help Please, stuck in odin mode and "software not recognized by AT&T "
So I got a new phone and I thought that this would be a great opportunity to learn how to do things on my own with my phones, Lucky me my new phone (Nexus 5) is way easier to root and do the fun stuff... but not my Galaxy S4
trying to odin back to stock I got stuck in Download mode and later i got a msg saying "Software not recognized by AT&T was found in your device" and on the top line in red said "Secure Fail: Kernel"
How can I flash the kernel and the new recovery ?
remember I am a Noob trying to learn, so go easy on me
What file were you trying to flash with odin? Do you have a link? Also, what firmware version was your phone on? The version you're trying to flash in Odin had to be at least as new as what your phone was on.
Sent from my Nexus 5 using XDA Free mobile app
The boot loader is locked. This means that the stock recovery and kernel cannot be replaced. Also, you cannot Odin flash firmware that contains a boot loader with a lower version than the one you are currently running.
jd1639 said:
What file were you trying to flash with odin? Do you have a link? Also, what firmware version was your phone on? The version you're trying to flash in Odin had to be at least as new as what your phone was on.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
jmjoyas said:
The boot loader is locked. This means that the stock recovery and kernel cannot be replaced. Also, you cannot Odin flash firmware that contains a boot loader with a lower version than the one you are currently running.
Click to expand...
Click to collapse
hey guys I was trying to flash the Pit file and the AP file, took me a few tries but the phone is up an running again, it is a little laggy tho, i feel like it just needs to be updated now ... might root it again and odin back to stock because i feel like theres something i did wrong but can't figure out why, if i brick it its fine, this is my "Guinea Pig Phone" because i am trying to learn about root and all ( Yes i am a noob ) I've been "studying" for about 2 month now
oh and Yes i made sure it was the right files for my AT&T Samsung Galaxy S4 SGH-I337
Brunolarogian said:
hey guys I was trying to flash the Pit file and the AP file, took me a few tries but the phone is up an running again, it is a little laggy tho, i feel like it just needs to be updated now ... might root it again and odin back to stock because i feel like theres something i did wrong but can't figure out why, if i brick it its fine, this is my "Guinea Pig Phone" because i am trying to learn about root and all ( Yes i am a noob ) I've been "studying" for about 2 month now
oh and Yes i made sure it was the right files for my AT&T Samsung Galaxy S4 SGH-I337
Click to expand...
Click to collapse
What firmware version are you on and why are you flashing a pit file? Don't flash the pit.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
What firmware version are you on and why are you flashing a pit file? Don't flash the pit.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Like I mentioned earlier I am trying to learn and one of the links I found told me to flash both PIT and AP
after i finally made it work, my version was back to touchwiz and android 4.2.2
Brunolarogian said:
Like I mentioned earlier I am trying to learn and one of the links I found told me to flash both PIT and AP
after i finally made it work, my version was back to touchwiz and android 4.2.2
Click to expand...
Click to collapse
If it's running show I would flash the mdl firmware again without the pit file. Then root it with motochoper and put twrp on it. Then flash a custom rom.
http://forum.xda-developers.com/showthread.php?p=41892523
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
If it's running show I would flash the mdl firmware again without the pit file. Then root it with motochoper and put twrp on it. Then flash a custom rom.
http://forum.xda-developers.com/showthread.php?p=41892523
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
MDL file or md5? just in case I have the wrong file, do you have a link for the correct one by any chance?
Brunolarogian said:
MDL file or md5? just in case I have the wrong file, do you have a link for the correct one by any chance?
Click to expand...
Click to collapse
Go to sammobile.com for mdl, 4.2.2, firmware
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Go to sammobile.com for mdl, 4.2.2, firmware
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Awesome... thank you, Brother
I'll try that as soon as I leave work and get home, if you don't mind, can I keep asking you a few questions later on when I'm doing it ?
I'm actually really interested and excited to learn all this
Brunolarogian said:
Awesome... thank you, Brother
I'll try that as soon as I leave work and get home, if you don't mind, can I keep asking you a few questions later on when I'm doing it ?
I'm actually really interested and excited to learn all this
Click to expand...
Click to collapse
I'm on xda frequently so I'll be around
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
I'm on xda frequently so I'll be around
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
You sir are THE MAN .... it worked, it's back to normal =]
BruKnowsBest said:
You sir are THE MAN .... it worked, it's back to normal =]
Click to expand...
Click to collapse
Glad you got it working
Sent from my Nexus 5 using XDA Free mobile app

Categories

Resources