Hi,
We have not been able to replicate the battery drain and random reboot issue that several users have reported after the ICS update and subsequent firmware updates.
As such we are looking for a few volunteers here to run a custom logging problem and report back their results. The system needs to have either the random reboot or battery drain issue and cannot be rooted.
If you are willing to run this logging problem (very much appreciated) then please PM with the following information.
Name
Email Contact Information
Serial Number
Problem Description
Sincerely,
Gary
Update -
I will start sending out the logging file and instructions to the test group tomorrow.
The logging tool simply captures low level OS routines that might lead us to the source problem.
3/21/2012 Update -
The logging tool was delivered to the first control group tonight. I will send the tool to the second control group tomorrow. Thank you for your assistance and replies.
3/26/2012 Update -
Thank you for your assistance and log reports. R&D is working on them feverishly right now. I will send out the tool to a third control group shortly.
4/2/2012 Update -
First off, thank you for your assistance and log reports. We are still investigating root causes for some of the problems. As such, personnel from the three control groups might be contacted directly for a system replacement so we can further investigate the lockup problem. I will have an update later this week.
4/9/2012 Update -
Thank you for the continued log reports. We are working through all the data now within R&D and at NVIDIA/Google. As soon as I have word on a Firmware update I will post it here.
4/18/2012 Update -
We sent out a beta Firmware release to a few users for testing. So far, it has solved the problems these users have experienced but I am still waiting on a couple of test updates. We also received back a unit that had the random lockup and screen corruption problem and so far after 22 hours of testing no problems. If the balance of the test updates are positive, we will get this build qualified and releases ASAP.
4/24/2012 Update -
9.2.1.21 will roll out today in North America. This release addresses several of the random reboot and lock problems reported by a few users after upgrading to ICS. It also provides new functionality with WiFi-Direct, Unzip in File Manager, Restore Tab function in the Browser, and general performance/stability tweaks. Although we had a high success rate in the beta testing phase in solving the random reboots, there were a couple of users who still experienced it during deep sleep mode. We are having those systems returned to us for further analysis and regression testing with their particular setups.
5/3/2012 Update -
We will release 9.2.1.24 into beta testing shortly. This firmware contains new NV code based upon the beta test group who still had issues with .21. I will provide updates once the firmware goes out to the beta group but it did fix returned units that experienced random lockups after .21.
5/9/2012 Update -
I have been out with pneumonia but will have messages forwarded to the Customer Care Team. The .24 release is in final qualification testing and will be released shortly.
5/10/2012 Update -
The .24 release is approved and will be released in the near future.
5/14/2012 Update -
The .24 release should go to FOTA later today or early tomorrow. Please shutdown and perform a cold boot after updating.
5/15/2012 Update -
Bad news, Google has changed their CTS qualification requirements on firmware so the .24 release is delayed for a couple of days. We have asked for an exception to release earlier, especially since it already passed qualification testing.
5/16/2012 Update -
The .24 release should go to FOTA very shortly.
5/22/2012 Update -
Sorry for the delay, tried not to die from pneumonia last week after a relapse. I will start answering general questions again today and forwarding CSR events to the Service Team. Good news is that we have hired a full time employee to assist our Tablet owners in the Android centric forums. His name is Tien Phan and he is available here under the user name Asus_USA. He is part of our new Customer Loyalty Group and will be taking over forum coverage and assisting our valued customers. I will still be around, especially to handle technical problems and coordinate with Engineering until Tien is completely up to speed. However, as always, if you run into a problem that is not solved by our Service Group please feel free to contact me.
5/31/2012 Update -
We are working on another release with updated code from NV/Google. I will be in Taiwan next week to discuss this version and once a beta is available we will release it to a small group of testers. So far, this updated code based has worked extremely well on the TF201/TF300 in beta testing. As soon as I have an update it will be posted.
6/11/2012 Update -
We received additional code enhancements from NV/Google while I was in Taiwan last week. We will create a beta update shortly for testing and hopefully the next firmware update will occur in the next two weeks. I/O and Thread priority changes are the top two items and will address ANR and Sleep issues, however, still testing various application loads as some applications do not want to play nice with thread overrides.
7/4/2012 Update -
New .27 Firmware is released and addresses browser and ANR problems among other items. As always, after the update is complete, clear browser and system caches, shutdown and then power up.
I just checked your previous postings since I wasn't sure that you are who you claim to be. Judging by your previous postings I'd say that you are an Asus rep.
Now to the point.
What exactly does this logging of yours entail?
I am willing to help you out. Please answer in this thread if possible.
I sent a PM to Gary volunteering to participate
PM sent. Hope to hear soon.
Great! Been waiting to see some official movement on this. Will PM requested info.
Thiesen said:
I just checked your previous postings since I wasn't sure that you are who you claim to be. Judging by your previous postings I'd say that you are an Asus rep.
Now to the point.
What exactly does this logging of yours entail?
I am willing to help you out. Please answer in this thread if possible.
Click to expand...
Click to collapse
he is an ASUS Technical Marketing Manager
I will also PM you Gary, when I arive home and can send you my serial.
(pff never heard anything from Gary!)
I hope this goes better than the "No Serial Number" issue with the Prime, in which emails were never answered (including mine), and the promised fix that was "coming soon" in January, never came.
PM sent too.
Has anyone actually received a response form this yet? I believe that I was one of the first to PM this guy, but haven't heard anything back...
Thanks!
@jtrosky: Gary updated his post one hour ago with this
Update -
I will start sending out the logging file and instructions to the test group tomorrow.
The logging tool simply captures low level OS routines that might lead us to the source problem.
Click to expand...
Click to collapse
PM sent.
Thanks Gary for the doing this.
testing if this is a PM
PM sent from me as well. I would love to help out if it leads to my Transformer working as it did under Honeycomb. It used to be a rock of stability. Not so much with the 2 ICS updates.
I sent a PM. I would love to help test.
PM'd - Will happily run this tool if it will cure my list of bugs
Thanks Gary,
I also sent a PM.
I've definitely had all the random reboots, stuck in boot loop, battery drain, unresponsive touch screen issues since the ICS update. Everything was fine before that.
Hi Gary: Major kudos to you for reaching out to the community. This harks back to Asus' great efforts when the TF101 first came out, and I'm glad to see you've not forgotten us.
I'll be dropping you a PM; I have two TF101s and both suffer this problem at least once or twice per day, so it should be quite easy to get you a log.
PM'd, hopefully we can help. A bit frustrated with my transformer at the moment.
PM'd.. hopefully not too late!
Just got an email from Asus and installed the log program.
Related
Hey Everyone,
Wanted to tell all of you about a neat app we're developing, called Flexilis.
It's a mobile security suite for Windows Mobile devices, that keeps your device and data safe from loss, theft, hackers, viruses, malware, spam, and more.
We've currently opened signups for our private beta testing, if you're interested in checking it out, just hit up http://beta.flexilis.com and sign up, and feel free to chat about the product here
If anyone has questions or runs into trouble, just shoot us an email at [email protected] and we'll help you out!
-Chris
Community Director,
Flexilis Inc.
[email protected]
Also, if any of you request an invite and it hasnt gotten granted within a day or so, let me know and I'll take care of it.
If you weren't asking for so much personal information, you might actually get people to try your app...
we're actually working on revising that, the reason we ask for the phone number is because it's used to sms you your download link for the software later on in the process, we're in the process of moving that to later on in the process, as well as an explanation of why we ask for it.
Thanks for the feedback!
-Chris
NRGZ28 said:
If you weren't asking for so much personal information, you might actually get people to try your app...
Click to expand...
Click to collapse
Hey man,
nice thing with this soft, that we give the phone number is not so a big problem i think. could you post a little bit infos about the program? Cause on your side there a not many informations.
But i ithink i'll give it a try...
I just have one little question, on you privacy page you write:
When you use the Flexilis Services, our servers automatically record certain information about your usage. These logs may include information such as the IP address, mobile device identification number, phone number, operating system, version information, wireless carrier, web requests, browser type, browser language, referring pages, landing pages, pages viewed, or other usage information.
Click to expand...
Click to collapse
Why do record the pages we visit?
we're still working on a little bit of a tour/walkthrough area of the software on the front page, as we get closer to public beta, but for now there's nothing there yet. My first post in this thread gives a brief summary of it though. Feel free to shoot me an email at [email protected] with any questions!
-Chris
There's nothing in the software that tracks the pages you view or anything, what that refers to is on our end we track what pages users use on the flexilis website the most, much the same way other websites do, to track what pages and content on our site our most popular, etc.
JeckyllHavok said:
I just have one little question, on you privacy page you write:
Why do record the pages we visit?
Click to expand...
Click to collapse
I'm still not sure what your program do, but it certainly doesn't behave the way I expect.
1) Why to require authorization so often?
2) Contrary to the stated phone number is not accepted for authorization. Only email.
3) I don't really know what you mean by "a few minutes", but currently Flexilis is authorizing my phone already for more than two hours. I see no progress bar and I don't understan what's going.
4) I can't stop authorization process.
5) Why the authorization process continues even when I close all connections? Did you invent new method of communication?
6) The program is hidden from task managers and process viewers. What for?
I didn't sniff the traffic but currently behavior of your program reminds more of malware rather than security software.
My conclusion: As I don't understand what your program is doing, I'm not going to test it anymore until additional guidance is provided.
Sorry, if I'm sounding harsh. It's just writing style (tough work, you know )
No worries
1] once it's authorized the first time, it shouldnt have to authorize again, what kind of phone are you authorizing it on? we're making some fixes to the authorization process to make it even simpler that should roll out in the next release.
2] if you're outside of the US, you might need to add your country code and such if that's the case, let me know, or send me an email to [email protected] so we can look into it.
3] per all authorization questions, it'll try til its authorized, again we're fixing this.
4] per the it being hidden from task managers, we've given this some discussion, for right now it's a security feature to try to prevent theives from disabling the software, though we might fix that in the future to have the app visible in there somehow.
As far as being more indepth on all of the features, we are working on a tour of sorts to explain it all before the beta goes public.
Thanks for the feedback!
-Chris
mrcaze said:
I'm still not sure what your program do, but it certainly doesn't behave the way I expect.
1) Why to require authorization so often?
2) Contrary to the stated phone number is not accepted for authorization. Only email.
3) I don't really know what you mean by "a few minutes", but currently Flexilis is authorizing my phone already for more than two hours. I see no progress bar and I don't understan what's going.
4) I can't stop authorization process.
5) Why the authorization process continues even when I close all connections? Did you invent new method of communication?
6) The program is hidden from task managers and process viewers. What for?
I didn't sniff the traffic but currently behavior of your program reminds more of malware rather than security software.
My conclusion: As I don't understand what your program is doing, I'm not going to test it anymore until additional guidance is provided.
Sorry, if I'm sounding harsh. It's just writing style (tough work, you know )
Click to expand...
Click to collapse
Authorizing a device ... what a hassle. I finally gave up since I couldn't tell if it was doing anything. No more testing for or feedback from me.
fredcatsmommy: sorry it didnt work out for you. hopefully in the future when that's fixed (should be less than a week), we can lure you back, it does some amazing stuff, but we do run into bugs from time to time due to the vast number of windows mobile devices out there, and only having a small test bed of them to work with. Keep your eyes peeled, and we'll have that fixed soon!
fredcatsmommy said:
Authorizing a device ... what a hassle. I finally gave up since I couldn't tell if it was doing anything. No more testing for or feedback from me.
Click to expand...
Click to collapse
I think you need to tell us what the app actually does?
I have read this and your site and still don't know what it does?
Will hold off on trying it till I know.
How long is the initializing and activating supposed to take?
seriously, the authorizing bugs should have been worked out before releasing a beta here. we cant even tell if its running, authorizing, stealing information from our devices, etc.. I surely hope this is a legit app youre pushing, if so, FIX IT, so we can at least see what it does.
thx
I installed and authorized with no issues what-so-ever... contrary to what everyone else is saying everything seems to work just fine. works great and doesn't seem to take much memory... not a single complaint here!
Advertising your application for beta purposes is usually not a problem. But, it seems you are here more for "recruiting" testers than anything else. Looks like you joined for this purpose only.
My suggestion to you, is to give a little more description on your develpoment. Seems there are too many questions going unanswered here.
jhw549 said:
I installed and authorized with no issues what-so-ever... contrary to what everyone else is saying everything seems to work just fine. works great and doesn't seem to take much memory... not a single complaint here!
Click to expand...
Click to collapse
what device do you have? did you do anything special to get it working?
I have a sprint vogue and installed to main mem and the data conn. is constantly active.
Polargoat said:
what device do you have? did you do anything special to get it working?
I have a sprint vogue and installed to main mem and the data conn. is constantly active.
Click to expand...
Click to collapse
I have an HTC Mobul/Titan using default Rom/Radio with WinMo 6.1
To install it I just did what I would any other and installed it onto internal memory...
Correction: The application works just fine if you don't have push e-mail (aren't connected to a remote exchange server), I have been having problems all day with my push e-mail from mail2web which I use to forward my work e-mail to my phone. I have therefore decided to remove it as I can't afford to have it interfere with work.
Try out the new version. This is for all you old users who may have given up on the software and anyone new that would like to join. Click the link in my signature to sign up. Hopefully many of the freezing problems are worked out.
http://www.navizon.com/phpbb2/viewtopic.php?t=2520
Initial testing for me has shown no freezing of the software.
Does anyone have a Bluetooth fix yet? Not a work around. Thanks for the help.
I guess u might get your fix with the new build coming on the 21st.
Sent From My Evo Killer!
Thanks for the reply. With Sprint I might hold my breath. Besides that post on Sprint was a user, not an official thread. I want proof of the official thread not a pic of the thread. Proof is in the pudding. Not to be an ass. I seen this issue with other phones that got the very same issue on 2.2. No one had a fix just a work around and everything I seen was several months before Sprint published their Update for the Epic EB13. I know someone has a kernel or bluetooth fix out there. It is just going to take others to join in and help fix this issue.
cadams14 said:
Thanks for the reply. With Sprint I might hold my breath. Besides that post on Sprint was a user, not an official thread. I want proof of the official thread not a pic of the thread. Proof is in the pudding. Not to be an ass. I seen this issue with other phones that got the very same issue on 2.2. No one had a fix just a work around and everything I seen was several months before Sprint published their Update for the Epic EB13. I know someone has a kernel or bluetooth fix out there. It is just going to take others to join in and help fix this issue.
Click to expand...
Click to collapse
Looks like proof to me:
http://www.androidcentral.com/samsung-epic-galaxy-tab-and-transform-otas-coming-sprint-march-21
"Action Required: 3/21/11 Software Updates: Samsung Epic, Galaxy Tab, & Transform
Effective Monday, 3/21/11, these software updates will be available through Google Over-the-Air (OTA). All these devices will recognize a software update is required and will prompt the customer. See the device specific documents at ISC > Quick Links > Software Updates for required actions and associated screen shots. These device specific documents also include FAQs on how to use Sprint ID on the Epic and Tab. Other details:
Samsung Epic Upgrading to EC05
Update will be pushed to customers over a 4-day period
OTA duration time = 10-20 minutes; install time = 8-10 minutes
After the update completes, verify the new software version (Menu > Settings > About Phone)
Enhancements/fixes: upgrade to Android 2.2.1 (Froyo), add Sprint ID, install apps to external storage, improved Bluetooth device support, Bluetooth voice dialing, Flash Player 10.1, GPS enhancements improved OS performance.
Samsung Galaxy Tab Upgrading to EB28
Update will be pushed to customers over a 4-day period
After the update completes, verify the new software version (Menu > Settings > About My Galaxy Tab)
Enhancements/fixes: adding Sprint ID, adding DSA to check usage
Samsung Transform Upgrading to EB28
Update will be pushed to customers over a 4-day period
If a customer doesn�t initiate the update when prompted, the customer can install it manually after 3/24/11 (Menu > Settings > About Phone > System Updates > Update Android)
After the update completes, verify the new software version (Menu > Settings > About Phone)
Enhancements/fixes: upgrade to Android 2.2 (Froyo), addition of Swype, Sprint Zone 2.5, Sprint ID activation improvements, Google Syncing errors, landscape mode issues on Home Screen, Search shortcut key, Sprint 3G mobile Hot Spot, updating from version DI01 to DI11 with Bluetooth on.
Note: All software updates are subject to change."
In case you guys don't check the main WP7 forums on here, the Microsoft Nodo update is officially available and working. I am updating my phone right now as we speak.
All you have to do is plug your phone into your PC and use the Zune software to update. It should automatically detect and ask for you to update.
Here's a link to a brief write-up on how to do this:
http://ow.ly/4jOfv
I checked at 3:50PM and still no update for my DVP Unlocked US T-Mobile.
Currently shows Your phone is up to date version 7.0 (7004)
just plugged in, no update yet. it is probably being pushed out in phases. cool that yours is updating, thanks for letting us know!
US DVP will most likely be LAST!
NO UPDATE YET GUYS. MY BAD.
I got some responses back from both the Microsoft Windows Phone Support and Dell Support. Microsoft says that they don't know when we will get it. Only that it will be before the end of the month. Dell support said that they don't know either.
This just boils down to the fact that for us here in the states, and as far as the Dell Venue Pro is concerned, the update release is in T-Mobile's hands.
I just want to know if it will fix the problems with wi-fi connections.
What's included in the update (emphasis mine), courtesy of Microsoft: http://www.microsoft.com/windowsphone/en-us/howto/wp7/basics/update-history.aspx
Microsoft said:
Here's a summary of what we've included in each update so far.
March 2011
OS version: 7.0.7390.0
•
Copy & paste. You asked for it—now it's here. Just tap a word and drag the arrows to copy and paste it on your phone. You can copy text from emails, text messages, web pages, and Office Mobile documents, and paste it anywhere you can type. To learn more, see Copy & paste.
•
Faster apps and games. Nobody likes to wait. That's why we've whittled down the time it takes for apps and games to start up and resume. It's all part of our focus on getting you to the things you love, easier and faster.
•
Better Marketplace search. We've streamlined Marketplace search to make it easier to find specific apps, games, or music. Press the Search button in the Apps or Games section of Marketplace and you'll see only apps or games in the results. Press Search in the Music section of Marketplace to search just the music catalog.
•
Other Marketplace improvements. We've improved the stability of Marketplace while you download apps. We've also improved the experience of downloading apps larger than 20 megabytes, upgrading from trial apps to paid apps, using a credit card with an address outside the United States, sharing links to apps via email, sorting Xbox LIVE games by release date, and creating an Xbox LIVE account from within the Games Hub.
•
Wi-Fi improvements. We now display your phone's Media Access Control (MAC) address in Settings. (You might need this info if you try to connect to a Wi-Fi network that uses MAC address filtering. To learn more, see Connect to a Wi-Fi network.) We've also removed the limit on the number of Wi-Fi profiles that you can store and reduced the time it takes to start your phone if you've stored lots of Wi-Fi profiles.
•
Outlook improvements. We've improved the experience of viewing iPhone photo attachments you receive from a non-Exchange-based email account (such as a Google Mail, Hotmail, or Yahoo! Mail account), using the Global Address List (GAL) when connecting to Exchange Server 2003 using Exchange ActiveSync, and working with email display names that contain brackets (for example, "David Alexander [Contoso]").
•
Messaging improvements. We've improved the experience of receiving Multimedia Messaging Service (MMS) messages if your phone uses a PIN-locked SIM.
•
Facebook integration. We've improved the experience of syncing Facebook accounts.
•
Camera improvements. We've improved the stability of switching between camera and video modes.
•
Audio improvements. We've improved the experience of using a Bluetooth headset to make calls when you're playing music or videos.
•
Other performance improvements. This month's update also includes software from several phone manufacturers that improves the performance of specific models. Naturally, if you don't have one of the affected models, we won't install this portion of the update on your phone.
Click to expand...
Click to collapse
Looks like NoDo may update DVP firmware (105->202) and radio software (15->18), assuming this phone had the same revisions as mine:
Update completed..
OS version : 7.0.7390.0
Firmware revision no. 2250.1800.7355.202
hardware revision no. 112.576.2.0
Radio software version. 2.2.50.18
Radio Hardware version. 8250
Bootloader version. 7.27.1.0
Chip SOC version. 0.36.2.0
Click to expand...
Click to collapse
from http://forum.xda-developers.com/showpost.php?p=12297681&postcount=34
pjfan75 said:
Looks like NoDo may update DVP firmware (105->202) and radio software (15->18), assuming this phone had the same revisions as mine:
from http://forum.xda-developers.com/showpost.php?p=12297681&postcount=34
Click to expand...
Click to collapse
Funny how only one person has reported getting the update, no one else with a US device has reported getting an update.
efjay said:
Funny how only one person has reported getting the update, no one else with a US device has reported getting an update.
Click to expand...
Click to collapse
According to his profile he is in India.
pjfan75 said:
According to his profile he is in India.
Click to expand...
Click to collapse
So's MS tech support.
richlee111 said:
In case you guys don't check the main WP7 forums on here, the Microsoft Nodo update is officially available and working. I am updating my phone right now as we speak.
All you have to do is plug your phone into your PC and use the Zune software to update. It should automatically detect and ask for you to update.
Here's a link to a brief write-up on how to do this:
http://ow.ly/4jOfv
Click to expand...
Click to collapse
What's the amount of RAM showing as now?
pjfan75 said:
According to his profile he is in India.
Click to expand...
Click to collapse
Thanks. So that would confirm that our update is being held hostage by T-Mobile.
And I was so excited to read the news on engadget's website, only to be disappointed...
I'm okay with getting late updates as long as I get one but I really hope DOJ does not approve the AT&T buying Tmobile. I HATE AT&T.
pjfan75 said:
According to his profile he is in India.
Click to expand...
Click to collapse
does that mean he bought his phone from India or his live ID has indian address?
I am from India as well with T-Mo (unlocked ) and Live ID with US address to access marketplace.
Is there anyway to Debrand the DVP? I think we would receive the update sooner.
no access to registry...yet
Anyone with non-carrier DVP who is willing to volunteer to help in getting the nodo update un-branded?
Basically this is what i need:
A Non Carrier DVP which has not been updated to NoDo, but is eligible or being prompted for. (or) A Non Carrier DVP which has been updated to NoDo, but is willing to reset the device to have it updated again thru my steps.
What will i do:
The user needs to install Wireshark and capture the log for Microsoft servers and send me the same. I can then figure out the direct path to the download.
Let me know and i will PM the details.
notebookgrail said:
Anyone with non-carrier DVP who is willing to volunteer to help in getting the nodo update un-branded?
Basically this is what i need:
A Non Carrier DVP which has not been updated to NoDo, but is eligible or being prompted for. (or) A Non Carrier DVP which has been updated to NoDo, but is willing to reset the device to have it updated again thru my steps.
What will i do:
The user needs to install Wireshark and capture the log for Microsoft servers and send me the same. I can then figure out the direct path to the download.
Let me know and i will PM the details.
Click to expand...
Click to collapse
Any idea if any future hacks would allow us to backup our text messages?
Why is it that we have to wait for T-Mobile to (eventually) give the ok for an update? Why didn't MS just make it so we plug our phones in, hit Zune update and everything does its thing?
Reading the Twitter updates about Euro T-Mobile pushing the update at the end of April is a little disheartening. There's no telling when US T-Mobile will push the update...
I installed CM7 for Droid Pro UPDATE 8/08 yesterday. But I still have difficulty for:
1- Call Forwarding – All call forwarding items are not available
2- SMS delivery report – There is no SMS delivery report even all SMS are delivering to destinations
3- Right side Key is inactive. How can assign actions to this key.
4- In-Pocket sensor is not active. This sensor will turn off screen automatically when you put in mobile in the pocket.
5- Switch is not quick between GPRS and Wireless and wireless connection is very unstable.
6- With new updates, VPN connection is not possible.
Please CrackMonkey91 (http://forum.xda-developers.com/member.php?u=2479277)
check it and help. Other Members Help most welcome.
Thanks.
Is there any solution?
Hi All,
I'm still waiting for any solution for my Droid Pro as I mentioned before.
Please check and give your ideas.
Thanks.
You should probably post in the actual CM7 thread. Starting a new thread, especially one with a vague title, is probably not going to get the attention of anyone involved in the development process.
Also, CM7 for the Pro is currently in the alpha stages, so features are still being added, and there are going to be bugs. If you need a system that works all the time, right now, you're better off with the stock ROM.
freak4dell said:
You should probably post in the actual CM7 thread. Starting a new thread, especially one with a vague title, is probably not going to get the attention of anyone involved in the development process.
Also, CM7 for the Pro is currently in the alpha stages, so features are still being added, and there are going to be bugs. If you need a system that works all the time, right now, you're better off with the stock ROM.
Click to expand...
Click to collapse
Thanks a lot freak4dell,
As I new user here, it seems that I can't post in Developers part
Also, do you offering me to use original Droid Pro ROM? if so, please let me know where I can find it. (I don't have this original ROM to install and get back to previous version)
Thanks a lot again,
Hmm...odd. Maybe you should send a private message to the user, then.
As for going back to stock, you'll have to go through this procedure:
http://www.droidforums.net/forum/motorola-droid-pro/112314-official-droid-pro-sbf-tbh.html
Then, you'll have to do the updates (Settings > About phone > System updates). Then, if you want the Gingerbread update, you'll have to do this:
http://www.droidforums.net/forum/dr...gingerbread-ota-update-zip-file-download.html
The instructions for applying the Gingerbread update are on the second page of that thread.
Thanks a lot Freak4dell
I'll do the instructions and will update here.
Thanks again,
I did it. it came back to original.
Many thanks freak4fell