[Q] No Connection with Aurora 2.02 - Huawei Ideos X5 U8800

Hi Guys,
Because i cant post in the Andoird Development thread yet i put the question here.
Correct me if its wrong.
With aurora 2.02 on my Ideos X5 i cant connect to the Network, Cant recieve calls/SMS.
Does anyone have a solution?
Thanks in advance!
I also cant install Whatsapp because it cant read the unique identification code from my device?

Hi, did you updated from previous version, or have you installed it from other ROM? It happens sometimes, that the ROM doesn't get properly installed and can't read devices info like IMEI, WIFI MAC adress,...
Usually re installing the ROM fixes the problem, but you have to clear cache and dalvik first.

I've updated from a 2.3.7 rom from another dev.
i did wipe all the data/cache/delvik.
And yesterday i tried installing MIU en then installing Aurora again with full wipes but still i have the same problem?

triesvan said:
I've updated from a 2.3.7 rom from another dev.
i did wipe all the data/cache/delvik.
And yesterday i tried installing MIU en then installing Aurora again with full wipes but still i have the same problem?
Click to expand...
Click to collapse
First update to b516 or something like that .35 stock than update to ics. These problems generally happens with .32 kernel. Read aurora's first post carefully everything you need is there.
Sent from my U8800

emines -0.6169
Thanks, I will try that method this afternoon and post results

Related

[Q] Galnet Miui ICS + CM9 Multiboot is it possible

Guys,
So if am reposting the same query. Tried searching but didnt get any result.
I'm using GalnetMiui ICS as my primary rom. Saw this thread about multiboot and tried it. v0.4 didn't boot from 2nd boot. So i installed the old version v0.3 .. I could flash CM9-ICS-MR0-111207-jordan-KERNEL-2.3.4-Quarx and update it to CM9-ICS-MR0-111211 .
But now i'm not able to boot from 2nd init !
I tried doing the whole thing again starting from installing MIUI then applying multiboot patch and then installing CM9 ... but in vain.
Please help me get through.
NB: i noticed one more thing, running cm9 in 2nd boot is not giving me any network, when i try searching for a network its shows some error.
vsvj said:
Guys,
So if am reposting the same query. Tried searching but didnt get any result.
I'm using GalnetMiui ICS as my primary rom. Saw this thread about multiboot and tried it. v0.4 didn't boot from 2nd boot. So i installed the old version v0.3 .. I could flash CM9-ICS-MR0-111207-jordan-KERNEL-2.3.4-Quarx and update it to CM9-ICS-MR0-111211 .
But now i'm not able to boot from 2nd init !
I tried doing the whole thing again starting from installing MIUI then applying multiboot patch and then installing CM9 ... but in vain.
Please help me get through.
NB: i noticed one more thing, running cm9 in 2nd boot is not giving me any network, when i try searching for a network its shows some error.
Click to expand...
Click to collapse
It is not possible to run newer versions including 111207 in multiboot due to the new kernel.
you need to make this your primary boot
hope i could help you, greetz Esok
sadly understanding the truth.
Yes , i sadly am understanding it. But I've found out a dumb method to use dual boot. Flash the respective kernels when in need of switching from GMIUI to ICS CM9.
but still the CM9 ICS is not giving me any phone signal [in 2nd boot], i dont have any sim pin activated.
If i make CM9 my primary rom , phone signal is ok and i can make / recieve calls. ??
For now i need Galnet Miui as my primaryu ROM atleast until the ICS CM9 is officially released for Defy...
cm9 is my primary rom and everything works great, at this moment i'm on the phone
maybe you could just make a nand backup of your wajkiui and flash cm9.
if everything works you can keep cm9 and if not just flash back
greetz esok

DroniX

Hi
im new to android ..
i own a ideos u8150.........and i have rooted it with z4 root
I also have managed to install clock world mod 3.0.2.4 i flashed it through pc (works perfectly)
now i want to change my stock rom ..i' heard ideos HD and droniX are good roms
i'd like to install droniX 0.6 raw ginger ..
but can anyone help me in flashing the rom i need a guide..
also how can i make full backups so i can revert to my stock rom anytime i want..
Does switching to custom roms affect baseband of my mobile ..
because of a picture i saw in a blog that says "baseband version :unknown" in mobile settings .
i have been a apple user and to jailbreak you need to preserve your basebands so is there anything like that in android
i have also read that after flashing dorinX .6 many see a black screen ..how can i prevent that..
i've also installed rom mangaer free version from market but its useless because everytime press any option it tells me to install colckworld mod and when i press install a list of phones comes up but u8150 is not in the list only 7 options.......
Thankyou
You won't get much love here as this is in the wrong forum, but here is a link to my rom:
http://forum.xda-developers.com/showthread.php?t=1375289
You dont need to use my rom, it just has flashing instructions in the first post.
*Good luck with ginger, it is still not stable, so maybe stick with 0.5.4.
*Baseband is not changed by flashing roms in CWM, only by official huawei update software, find a copy of yours before flashing if you can.
*CWM has the option to make a NAND backup under backup and restore.
*Dronix is good, Leandroidmod is ok, Ideos HD seems to be deprecated as I had bugs which I reported and have not been fixed so I switched roms. Has not had an update in months.
Here is the wiki page for u8150, have fun:
http://forum.xda-developers.com/wik...ei_U8150_IDEOS#Actively_Developed_Custom_ROMs

[Q] Problem with Wifi (CM7.2)

Today I installed CM7.2 following the instructions in the thread. I came from stock froyo 2.2.1 and everything worked fine but had some random reboots.
Since I have CM7.2 installed my wifi doesn't work anymore. If I turn it 'on', it doesn't search for available networks. It disables itself after +-30sec. I also noticed I don't have a Mac-adress anymore.
Is it possible that the problem is caused by doing no 'remove caches'. It wasn't in the instructions so I didn't do it. Should doing that fix the problem?
reflashing always works hehe
Tried it and it worked.
Sorry for the useless thread...
I am having this same problem with the newest Aurora ICS, but reflashing didn't fix it.
If you want a stable GB rom forget about the official roms and use any custom GB with .32 kernel. These are the most stable ones. I use ezet's.

Miui + defy+ (2.3.5)

Hi everyone,
I was trying to post this in another thread but I'm unable to post in the Development sector.
I have a Motorola Defy+ running the Android 2.3.5, I've tested the following ROM's:
CM9 by quarx
CM9 by Epsylon
Both runs just fine, but I was thinking this weekend to test another rom's to have new experiences and found out about the MIUI, which seens to be a very good rom.
But the fact is that I'm facing some troubles trying to run this rom.
Everytime I try to apply it, the Recovery says to me that the install went ok, but once I reboot the phone, I got stuck in the Motorola Bootloader screen, and I have to flash a stock SBF again.
I've tried the STABLE (GB) and the BETA (ICS), both got the same problem.
Different versions of 2ndinit (1.4, 2.0, 2.3).
Does anyone know why I'm having this problems?
I would appreciate any help.
Best regards,
AFAIK, MIUI requires Froyo kernel and Defy+ has GB kernel.
Evolution-VII said:
Hi everyone,
I was trying to post this in another thread but I'm unable to post in the Development sector.
I have a Motorola Defy+ running the Android 2.3.5, I've tested the following ROM's:
CM9 by quarx
CM9 by Epsylon
Both runs just fine, but I was thinking this weekend to test another rom's to have new experiences and found out about the MIUI, which seens to be a very good rom.
But the fact is that I'm facing some troubles trying to run this rom.
Everytime I try to apply it, the Recovery says to me that the install went ok, but once I reboot the phone, I got stuck in the Motorola Bootloader screen, and I have to flash a stock SBF again.
I've tried the STABLE (GB) and the BETA (ICS), both got the same problem.
Different versions of 2ndinit (1.4, 2.0, 2.3).
Does anyone know why I'm having this problems?
I would appreciate any help.
Best regards,
Click to expand...
Click to collapse
MIUI is a froyo based ROM.
Downgrade to froyo if you need to flash it..
Sent from my Defy+ using Tapatalk 2

[Q&A] [ROM]SLIMPOP [wiko rainbow][micromax a120 c2c]

Q&A for [ROM]SLIMPOP [wiko rainbow][micromax a120 c2c]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM]SLIMPOP [wiko rainbow][micromax a120 c2c]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Link
And where is the link to download ROM?
my phone is not working pls help me
2 days before when i rebooted my phone it showed me as encryption unsuccesful and stucked at boot logo.but i tried to wipe data...bt it showed me error mount/data error...so i tried to flash using sp flash tools....instead of selecting firmware upgrade and tried format and download....format done but on download it showed me error 5069....pls help me..to solve this ASAP...
I repartioned my device does it causes any defects??
i dont know anything where i have to post this....pls help
Issues with GPS
Hello smokerman,
First thank you for this incredible rom, it's very fast and slick !
I have a brand new wiko rainbow and i tried to flash numerous times your rom (slimpop v2) i noticed no issues except with the GPS and location services in general, i activated the GPS + 3G+wifi network positioning, and nothing seems to work i can't get a position, i tried to use numerous gps fix app, and even your own GPS fixer for the wiko rainbow published on your website in april, and still no luck.
I flashed the wiko in stock kitkat 4.4.2, installed TWRP recovery after rooting it, then used the recovery to flash the slimpop v2 zip + the rootfile do the wiping and all the shebang following your instructions to the letter, but everytime (i tried 5 times) the location service just don't work, i tried all the engineering tools available in the dev section of the phone to try and pinpoint the issue but no luck.
Of course i tested if the GPS and location services were working fine with the stock wiko 4.4.2 rom (gps tools, dev tools, waze) it all work fine !
Do you have any ideas what i could have done wrong ? Im open to do some testings, or report any kind of logs you would need to track that issues.
Thanks,
Cya
EDIT1 : strangely enough after a few tests with differents roms, it seems that all the roms i tried that use the WR kernel have issues with the GPS (even with your fix) the ones that doesn't use it have no problems working. I was thinking maybe that brand new rainbow has a different GPS chip ? i got no clues as to why it's not working
I am using MyPhone Rio, and Wiko v13 as base, followed the instructions on flashing, yet stuck on first boot logo after flash. Hmnn, don't know what to do
ktsarlz said:
I am using MyPhone Rio, and Wiko v13 as base, followed the instructions on flashing, yet stuck on first boot logo after flash. Hmnn, don't know what to do
Click to expand...
Click to collapse
I had this problem when i wasn't using the base V13 from scratch (as in reflashed into the phone) then rooted with kingroot then installed the philz recovery that smokerman supplied, then boot in recovery > wipe for installing new rom (it's an option) > then flash the slimpop v2. before doing that i was stuck all the time in bootloop like you. Maybe try this ?
d4rk80z said:
I had this problem when i wasn't using the base V13 from scratch (as in reflashed into the phone) then rooted with kingroot then installed the philz recovery that smokerman supplied, then boot in recovery > wipe for installing new rom (it's an option) > then flash the slimpop v2. before doing that i was stuck all the time in bootloop like you. Maybe try this ?
Click to expand...
Click to collapse
Hmn, before flashing this, I did flash Wiko v13 thru spft, tried wipe to install new rom as I am using Philz, also tried wipe cache dalvik factory reset, same result. I also tried flashing slim v2 as Wiko v10 still stuck on boot logo. I can use 1.1 and 1.2 perfectly before. I am not sure what I am doing wrong
ktsarlz said:
I am using MyPhone Rio, and Wiko v13 as base, followed the instructions on flashing, yet stuck on first boot logo after flash. Hmnn, don't know what to do
Click to expand...
Click to collapse
ktsarlz said:
Hmn, before flashing this, I did flash Wiko v13 thru spft, tried wipe to install new rom as I am using Philz, also tried wipe cache dalvik factory reset, same result. I also tried flashing slim v2 as Wiko v10 still stuck on boot logo. I can use 1.1 and 1.2 perfectly before. I am not sure what I am doing wrong
Click to expand...
Click to collapse
Have you tried for the initial stock flash to use the wiko official tool V13 KK ? maybe there is something wrong going on with your spft, otherwise no clues ^^
I saw that smokerman posted in the original thread that it should be flashed over a V10 stock, and not a V13, sadly he doesn't seems to look at that Q&A thread and i don't have enough post to ask directly in the original thread...
Anyway since we replace everything kernel + rom, what technical reason is there to have a basic V10 instead of anything (like a V13), since we seems to replace everything anyway. Im curious.
EDIT1 : well still no luck starting with a V10 stock rom then flash the slimpop v2 following the procedure, the gps still giving me no fix at all... ah well too bad, it was looking like an incredible rom, i will use the stock until i find something else to use.
Keep up the good work.
Cheers
d4rk80z said:
I saw that smokerman posted in the original thread that it should be flashed over a V10 stock, and not a V13, sadly he doesn't seems to look at that Q&A thread and i don't have enough post to ask directly in the original thread...
Anyway since we replace everything kernel + rom, what technical reason is there to have a basic V10 instead of anything (like a V13), since we seems to replace everything anyway. Im curious.
EDIT1 : well still no luck starting with a V10 stock rom then flash the slimpop v2 following the procedure, the gps still giving me no fix at all... ah well too bad, it was looking like an incredible rom, i will use the stock until i find something else to use.
Keep up the good work.
Cheers
Click to expand...
Click to collapse
For me, with v10 as base still does not boot Haha
Slimpop is based on KitKat, I suppose??

Categories

Resources