problem with MIUI android - HD2 General

i have MIUI android 2.2.10 and i want to install BoxmaX GT+GTS+GTX v3.0 but i dont know should i format the sd card 1st or replce the Android file or what?????? plzzz someone help me coz i knew that this version of android is way far better than MIUI...thank u all
now i formated the sd card and i put the android file in the sd and im trying to install the new version but it always stuck on MIUI start up screen?????? so plzzzz any help??

just put it in SD, go to Magldr & point the direction of the Folder of Boxmax
i using Miu from jaguar & i like it.

mengfei said:
just put it in SD, go to Magldr & point the direction of the Folder of Boxmax
i using Miu from jaguar & i like it.
Click to expand...
Click to collapse
thank u for ur help but even after i formatted and i put the ANDROID folder in the sd then from magldr i choose it but still stuck in the MIUI old screen...im using now MIUI 2.3.9 and it works fine with me until i find a way to use this version thank u soo much for ur help.

Are you using Clockwork Mod Recovery to flash the new ROM? Are you doing as full wipe of your data, cache, and delvick cache? Also you do not need to reformat your SD card to flash a new ROM, you only need to do that if you are having trouble out of your SD card.
To access Clockwork Mod Recovry from MAGLDR you have to select the AD recovery option from MAGLDR main menu. Once in Clockwork Mod Recovery you have to select install from SD card and then select choose from SD card and then select the ROM you want to flash.

Related

[Q] [Help] Can't get any Os on my Leo :(

I followed this guide:
w w w.jayceooi.com/2011/01/07/how-to-install-nand-android-on-htc-hd2-with-clockworkmod-recovery-video
and now i dont have any OS on my htc, it just sais
booting android from nand
and it keeps getting stuck at Go Go GO!!
help me!
hallamartin said:
I followed this guide:
w w w.jayceooi.com/2011/01/07/how-to-install-nand-android-on-htc-hd2-with-clockworkmod-recovery-video
and now i dont have any OS on my htc, it just sais
booting android from nand
and it keeps getting stuck at Go Go GO!!
help me!
Click to expand...
Click to collapse
I would get another ROM and reflash it, whether it's a ZIP ROM (CWM) or a NAND ROM via DFT.
it would be awsome if you could send me a link to a good rom? android or windows? realy need this to work
hallamartin said:
it would be awsome if you could send me a link to a good rom? android or windows? realy need this to work
Click to expand...
Click to collapse
Well there's lots of good roms out there... they are all very easy to flash back and forth from. I hate to say which one is "better" than another as that is purely subjective and everyone has a differing opinion. However, it seems a lot of people really like Sergios, MDJ's and CMYXLGO's ROMs. As a start you may want to check out one of those... Here is a link to the main Android NAND forum.
I have
•HSPL3 ~ SPL-2.08.HSPL
•Radio that support 576 RAM
•DFT MAGLDR Bootloader
•ClockworkMod Recovery
Installed.
Can you send a link to a rom that supports clockwork? i dont realy care witch one just one that works. am e newbie in this just got the phone yesterday, and now i kinda afraid i cant fix it :/ :/
hallamartin said:
I have
•HSPL3 ~ SPL-2.08.HSPL
•Radio that support 576 RAM
•DFT MAGLDR Bootloader
•ClockworkMod Recovery
Installed.
Can you send a link to a rom that supports clockwork? i dont realy care witch one just one that works. am e newbie in this just got the phone yesterday, and now i kinda afraid i cant fix it :/ :/
Click to expand...
Click to collapse
If it turns on and will boot to the bootloader, it's fixable So don't worry that much! Try out Sergio's ROM. It supports CWM. If you do use that one be sure to back up your SD card as you have to repartition it.
The steps to install it are:
Code:
HD2 COREDROID Desire HD V1
1. Extract downloaded zip to a folder of your choice
2. Copy contents of copy_to_sd_root (initrd.gz and zImage) to the root of your sd card
3. Boot into magldr and select USB Flasher option while phone is connected to PC
4. Run DAF.exe included in the zip and follow onscreen instructions.
5. After complete devise will reboot in magldr chose "Boot AD SD" option
6. Device will boot into Clockwork Recovery
7. Select advanced
8. Select Partition SD card (remember too backup all valuable data you have on SD Card)
9. Selet (minimum 512M)(maximum 1024M) Chose what fits best for you Recomended size 1024M
10.Select Swap 0M
11.Wait for the process too finish (do not restart device stay in ClockWork recovery)
12.Connect the Device into USB
13.select mounts and storage
14.select mount USB storage
15.Copy contents of copy_to_sd_root (initrd.gz, zImage) to the root of your sd card
16.Copy CoreDroid_HD_HD2_v*.zip to the root of your sd card
17.Press back key after finish
18.Press back key once more
19.Select install zip from sdcard
20.Select choose zip from sdcard
21.Select CoreDroid_HD_HD2_v* file and then confirm
22.Wait for it too finish
23.After flash options pop up again Press back Key
24.select reboot system now
25.Let it boot wait about +-10Min Enjoy
I haven't really examined the guide you followed that much, but make sure you have installed a recent version of Magldr (i.e. the one you can download in the official Magldr thread in the WinMo subforum, version 1.11 to be precise). The first version(s) have been notorious for the Gogogo! bug persistently affecting some users.
Just a fyi, ignore this if you already have this v1.11
I got the aMagldr V1.11
The rom you sendt me doesnt work, it stopps here:
Run DAF.exe included in the zip and follow onscreen instructions.
i allredy installed a Daf.exe can that be the problem?
hallamartin said:
i allredy installed a Daf.exe can that be the problem?
Click to expand...
Click to collapse
No, because it's not really an installer, but a flasher. I'm not really an expert on the CWM issues, but it seems to me like formatting your SD card(do a full format, not the quick one) might help you, since it's quite probably your SD card being the *****.
It may not help you, but if you've got a few minutes I'd say give it a shot. Don't forget to backup important SD (NAND isn't affected) first of course!
Oh, and there's also this small chance that your CWM download is corrupt. Not sure if that would give the gogogo error though.
Sorry for being a complete newb, but how do i do the hard format?
but do i need the DAF.exe to install the rom?
You'd have to format in Windows (which I assume is the OS you're running), which now that I think of it may be a bit of a problem. I don't think you can mount your SD card with Magldr, which means that you'd have to use an external card reader. If you don't have that, you'd have to reflash WinMo to format, but since that's quite some more work for something that I can't even guarantee to be a solution you might wanna hold on to other suggestions.
DAF.exe is the tool which flashes CWM to your phone. Some other tools and/or ROMS use the same name for their flasher though.
after this one :
8. Select Partition SD card (remember too backup all valuable data you have on SD Card)
9. Selet (minimum 512M)(maximum 1024M) Chose what fits best for you Recomended size 1024M
10.Select Swap 0M
i can't do **** i cant open the device in windows. is there no way i can just system recover the whole device? or do i have to rom it?..
realy need this to be working, prefer android but windows is okey
StephanV said:
You'd have to format in Windows (which I assume is the OS you're running), which now that I think of it may be a bit of a problem. I don't think you can mount your SD card with Magldr, which means that you'd have to use an external card reader. If you don't have that, you'd have to reflash WinMo to format, but since that's quite some more work for something that I can't even guarantee to be a solution you might wanna hold on to other suggestions.
Click to expand...
Click to collapse
dosn't seem like there is allot of things i can do? i just hope i didnt brick it...
i cant send it to repair like this?
hallamartin said:
dosn't seem like there is allot of things i can do? i just hope i didnt brick it...
i cant send it to repair like this?
Click to expand...
Click to collapse
It sure is no brick, as long as you can boot into bootloader (turn on phone while keeping volume down pressed) there's no problem at all. No need to return it either.
If you feel really desperate try the WinMo thing, you've got nothing to lose except for about 30 minutes of your time.
winmo thing? is there any guide?
if i download a format program i can format the sd card..
1. Flash WinMo, this should be no problem in bootloader
2. I think it's possible to format your SD card within WinMo. I've never used WinMo actually so I can't give instructions on that.
If you can't find it or if it isn't possible, mount your SD card so you can see it in Windows. Backup data if necessary. Then right click on it (in Windows), and choose format, then disable quick format which should be selected by default. After the format you should have a clean SD card.
4. Flash Magldr again, following instructions in the official Magldr thread. Download a new copy off xda, to eliminate the possibity of just having had a corrupt download.
6. Flash CWM, following instructions in the official CWM thread.
7. Flash ROM.
Edit: I used WinMo where I meant the mobile OS, and Windows where I meant the pc OS.
I did format the SD card, nothing new just that CWM disapeard.
Now its loading with aMagldr v1.11
And i Have Spl-2.08. Hspl 8g Xe
Can anyone send me a link to a good Win 6.5 rom and anykind of guide?

Very confused user........HTC HD2 + MIUI

Hi guys,
I have read this post:
http://forum.xda-developers.com/showthread.php?t=1021837
I am using a HTC HD2 (international version)
I would like to know if it's possible to do the following?
- boot MIUI (http://www.miui.com/download.html) from SD card
From what I have read about MAGLDR, it seemed that I can copy MIUI to SD, and select option 2 in MAGLDR...........
Quoted:
Option #2
Boot AD SD, this will in the future allow you to boot Android from your SD card, but as for now it is not working just yet. This option also allows you to boot other Android specific software such as Clock Work Mod Recovery(CWM) that you have placed specific files for on your SD card. This option is not really needed for CWM as you no longer have to place files for it on your SD card you can flash it straight to NAND.
But it seemed that I need to burn MAGLDR into my phone, which I am afraid of bricking it............
Could someone let me know if I have the whole concept wrong?
Is it possible to run Haret after booting into Win6.5 to run MIUI (http://www.miui.com/download.html) from SD?
i think these tutorials answered by questions............but still a bit afraid to brick my phone..........
http://www.addictivetips.com/mobile/what-is-magldr-and-how-to-install-and-use-it-on-htc-hd2/
http://www.addictivetips.com/mobile/how-to-boot-android-from-sd-card-of-htc-hd2-with-magldr/
You can boot Miui in Winmo via SD. (using haret)
http://forum.xda-developers.com/showthread.php?t=969661
If you follow the instructions, you probably won't brick your phone by installing magldr.
I didn't want to use MIUI in SD format as no1 is doing it now:
Quoted:
SORRY I will stop to release any MIUI mods , including SD/MAGLDR version, owing to some unhappy things, check here:http://www.miui.com/thread-59240-1-1.html
Eelkede said:
If you follow the instructions, you probably won't brick your phone by installing magldr.
Click to expand...
Click to collapse
Managed to install magldr and CMW~~ and trying to "install"/"flash" MIUI files and trying to boot up and stuck at green HTC for 30 mins...........
Any ideas?
Wrong CWM partition file, Check the thread for info on how big the CWM partition has to be.
Eelkede said:
Wrong CWM partition file, Check the thread for info on how big the CWM partition has to be.
Click to expand...
Click to collapse
Sorry, noob question............
check which thread?..............
I've burnt the 400MB version...............
The thread of the rom you are trying to install.
Oh! Okay, I thought making it a bigger size will allow it to have more access to disk space for it's OS + programs, okay, I'll look into this area
How bigger the CWM partition, the bigger the OS space, which you can't use for apps.
But I can choose to install apps in SD card?
A closer look @ http://forum.xda-developers.com/showthread.php?p=11894125#post11894125
and I figured that it's running MIUI from SD which is not what I wanted?
I want it to flash into my NAND...............
That one is running from NAND. Follow his tutorial to get it running.
hmmmmmmm, okay.........let me try it again...........
Was doing the CMW thingy,
It failed with:
USB Init Failed...........
The thing is I have 1.3 of CMW, and the tutorial wants me to flash a v1.2 of CMW
http://forum.xda-developers.com/showthread.php?t=898913
Eelkede, from his post (http://forum.xda-developers.com/showthread.php?p=11894125#post11894125)
can you tell which size of CMW should I flash?
I might go here to reflash the correct size (v1.3 instead of v1.2)
(http://forum.xda-developers.com/showthread.php?t=898913)
btw, I used this to help me flash..............
http://www.addictivetips.com/mobile...kmod-recovery-on-android-htc-hd2-with-magldr/
150 mb is enough (you can edit it to a lower number, but let's just start normal)
Follow the Instructions you posted.
Put the .zip of the ROM on your sd card
Reboot phone, open the CWM (AD Recovery).
Select: Install Zip from sd card, find the .zip, install. Let it boot (it can take a while, just leave it).
Optional: Install (same way as rom) Language pack, reboot.
Done.
Oh! I used http://www.addictivetips.com/mobile...kmod-recovery-on-android-htc-hd2-with-magldr/
and flashed to 250MB and it's working now!
One thing I noticed; I was using Win6.5 + loading MIUI from SD using Harret, and this is faster than the one I had loaded in NAND..........
You mean it loads faster? or does it handles faster (in android)?
Could be, always reboot a few times before making a final judgement. You can try overclocking your device.
Glad I could help, have fun with MIUI on your device!

[Q] how to install android 2.3

Hello XDA Gods of Software,
I tried to install the 2.3 android on my phone but I can't find info for how to do that. I flashed my HD2 with stock rom. And I am stuck on installing the MAGLDR 1.12.
1. Reflash Radio .. I recommend the 2.15.50.14 Radio If you have a T-Mobile 1024
2. TASK29 Phone .. this will Clear / Erase The Rom
3. Reflash MAGLDR And ClockworkMod Recovery in that order!
4. FORMAT SD CARD! FULL WIPE and FORMAT .. I use Panasonic SD Formatter
5. COPY Android Rom ZIP USING SD CARD READER! .. If you dont have one BUY One!
Do Not Use MAGLDR And ClockworkMod Recovery to Copy Rom Zip To SD CARD!
IF AFTER YOU HAVE DONE ALL OF THIS AND IT STILL FAILS .. TRY A NEW SD CARD!
I Have Seen Many Times Its a Bad SD Card!
All Programs & Everything you need is in this thread!
click> http://forum.xda-developers.com/showthread.php?t=981811
There is a good video on youtube that I used to install HyperdroidGbx, which is android 2.3.3.
http://www.youtube.com/watch?v=71WDYfDg4sA
See if that helps...it shows magldr, cwm and rom install.....
You could try this thread: http://forum.xda-developers.com/showthread.php?t=939682

[Q] Dual boot android - NAND & SD

Is there a possibility that we can have 2 Android OS simultaneously i.e, MAGLDR version & SD Card version..???
If so, is there a bootloader that let's us select the version as we had in the SD card ROMs..???
You can use this
http://forum.xda-developers.com/showthread.php?t=1090783
to install MAGLDR and Clockwork recovery.
Get a CWM NAND ROM and put the rom.zip on your phone's sd card and flash it via Clockwork.
Then get an sd build, extract it to your sd card, and follow all the installation steps in the thread you downloaded it from.
You boot the sd build from the MAGLDR menu by chooding AD SD, but first you must set your sd directory. To do this, in the MAGLDR menu choose Services, BootSettings, then AD SD Dir, and choose the directory of your sd build.
Once you have flashed MAGLDR and CWM, you must hold down the Power button while booting up your phone to get to the MAGLDR menu.
Make sure you flash the right partition size for the ROM you'll be flashing to NAND
huggs said:
You can use this
http://forum.xda-developers.com/showthread.php?t=1090783
to install MAGLDR and Clockwork recovery.
Get a CWM NAND ROM and put the rom.zip on your phone's sd card and flash it via Clockwork.
Then get an sd build, extract it to your sd card, and follow all the installation steps in the thread you downloaded it from.
You boot the sd build from the MAGLDR menu by chooding AD SD, but first you must set your sd directory. To do this, in the MAGLDR menu choose Services, BootSettings, then AD SD Dir, and choose the directory of your sd build.
Once you have flashed MAGLDR and CWM, you must hold down the Power button while booting up your phone to get to the MAGLDR menu.
Make sure you flash the right partition size for the ROM you'll be flashing to NAND
Click to expand...
Click to collapse
Oh, that's great..!!!
Thanks for the help, may be I missed that thread while searching..!!!
Dear all,
I hope nobody minds reactivating thread.
I'm currently trying to install an Android dual boot setup. I installed a NAND Android (TBD SensationXL v2.5) which works already quite well for me. Now I tried to start an SD Android Build via Magldr. But none except ICS Beta 5 starts. All other start showing their Boot splash but phone boots never the less to NAND Android.
Has anyone an Idea, what the problem could be?
Thanks in advance
war_child said:
Dear all,
I hope nobody minds reactivating thread.
I'm currently trying to install an Android dual boot setup. I installed a NAND Android (TBD SensationXL v2.5) which works already quite well for me. Now I tried to start an SD Android Build via Magldr. But none except ICS Beta 5 starts. All other start showing their Boot splash but phone boots never the less to NAND Android.
Has anyone an Idea, what the problem could be?
Thanks in advance
Click to expand...
Click to collapse
Your steps should be as follows
1. Download an SD Android ROM with MAGLDR contents as well
2. Rename folder to whatever you like but the startup.txt MUST have rel_path= same name as folder
3. Place folder on root of SD card
4. Go to Services>AD SD Dir>Desired folder (in MAGLDR)
5. Select 'Boot AD SD' (or whatever the Android SD boot option is)
Oh, and reactivating the thread is infinitely better then starting a new one
Dear Nigeldg,
already did all this.
I'm just wondering why the ICS SD build boots normal while every other tested SD build won't boot
war_child said:
Dear all,
I hope nobody minds reactivating thread.
I'm currently trying to install an Android dual boot setup. I installed a NAND Android (TBD SensationXL v2.5) which works already quite well for me. Now I tried to start an SD Android Build via Magldr. But none except ICS Beta 5 starts. All other start showing their Boot splash but phone boots never the less to NAND Android.
Has anyone an Idea, what the problem could be?
Thanks in advance
Click to expand...
Click to collapse
Same here...
I think the SD ROM is not suitable to Recovery..
I've tried installing SD first, after that i install CWR, n try booting AD SD but got stuck on bootsplash..
war_child said:
Dear Nigeldg,
already did all this.
I'm just wondering why the ICS SD build boots normal while every other tested SD build won't boot
Click to expand...
Click to collapse
Hmm, seems odd. Which other builds have you tried?
Nigeldg said:
Hmm, seems odd. Which other builds have you tried?
Click to expand...
Click to collapse
have tried
http://forum.xda-developers.com/showthread.php?t=1256423
and
http://forum.xda-developers.com/showthread.php?t=957652
OK I think I found the solution in this thread:
http://forum.xda-developers.com/showthread.php?t=1375554
So I now switched to 3dak's Kernel on SD Build and it booted. Then tried to apply glitch fix from this post http://forum.xda-developers.com/showpost.php?p=19025914&postcount=12 I copied files via OI File Manager in system/lib/hw and system/lib/egl but now SD Android hangs at bootscreen.
Due to my postcount I can't as this in the respective thread, so does anyone can give a detailed installation description for this fix as my solution was obviously "suboptimal".

Need assistance on installing an Android rom on HTC HD2

Hi,
I am a complete newb to HTC and know hardly anything about installing a NAND rom on my HTC HD2.
I bought the phone recently on Ebay, it was running windows 6.5 but I wanted to change it to the latest Android rom. I just want it to be Android, run smooth and fast, be able to access android store and get latest apps, have wifi, 3GS and all the features that the phone can handle.
Basically I am stuck on the MAGDLR V1.12 main screen after following mskip's guide on flashing a HD2. I installed HARDSPL 2.08 and flashed MAGDLR 1.13.
I then followed 'langthang's' guide on installing his latest rom updated on 31 Jan by 'flashing Recovery with edit' then done a partition recovery v1.13 150MB ( this is where I think I may have chosen to little). This is where I am stuck at and do not know what to do next on installing a rom.
I know this may seem very 'newb' to many of you but I would be grateful for your guidance on just installing a good rom.
Thanks
When I go to AD Recovery it says in red ERROR: Invalid boot image header. And on startup something about kernel open failed.
i am completely confused and need help!!
install cwm recovery (latest is 5.0.x.x) again with correct partition size required by the rom. you need to edit flash.cfg and enter the correct size e.g.150 or 200 etc..
I have installed CWM 5.0.2.6 with a 200 partition size and can go to the AD recovery menu now. How do I edit the flash.cfg and actually go about putting the rom on the sd card using MAGDLR, I amconfused on that aswell do I extract the rom to my desktop or just put the rom zip file straight on the SD??
Thanks
Put rom zip without tampering with it if don't know wat to do...then get into cwm recovery ... install froM SD card n choose the zip...
Flash.cfg can be opened in notepad
Sent from my HTC HD2 using XDA App
gdsbalaji said:
Put Tom zip without tampering with it if don't know wat to do...then get into cwm recovery ... install froM SD card n choose the zip...
Flash.cfg can be opened in notepad
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Ok.
I do not get the Flash.cfg part at all, what do I edit and copy? I am using the HDToolkit4 2.01 to partition it now.
Also do I have to put the rom on the SD card to extract it from cwm recovery, not by going into USB mass storage mode??
mistrK said:
I have installed CWM 5.0.2.6 with a 200 partition size and can go to the AD recovery menu now. How do I edit the flash.cfg and actually go about putting the rom on the sd card using MAGDLR, I amconfused on that aswell do I extract the rom to my desktop or just put the rom zip file straight on the SD??
Thanks
Click to expand...
Click to collapse
I would suggest installing notepad++, you open the CWM folder you download and right click the flash.cfg file. Then you can edit the recovery size there.
I would suggest that you do not use MAGLDR to transfer a rom to your sdcard as there is a good chance it will corrupt, file transfer is still unstable. Just flash the correct recovery size, then boot into recovery from MAGLDR and transfer the rom to your sdcard there.
Do not extract the rom zip by the way, just place the whole zip on your sd and flash that.
What do I exactly edit?? Where is the CWM folder?? I still do not get this part at all, can someone guide me through it..
I flashed the recovery size through the HDToolKit...
Also, when putting the ROM on the SD Card, Do I have to take out the SD and put the ROM on that way with a adapter on my PC, OR can I just boot into recovery from MAGLDR and then connect my phone via USB with the SD inside and transfer it that way??
*****bump
mistrK said:
What do I exactly edit?? Where is the CWM folder?? I still do not get this part at all, can someone guide me through it..
I flashed the recovery size through the HDToolKit...
Also, when putting the ROM on the SD Card, Do I have to take out the SD and put the ROM on that way with a adapter on my PC, OR can I just boot into recovery from MAGLDR and then connect my phone via USB with the SD inside and transfer it that way??
Click to expand...
Click to collapse
If you look at the flash.cfg in Langthang's thread, yours should look exactly like that when opened (make sure to open flash.cfg, not flash.cfg.txt) in notepad++ or whatever notepad type thing (not MS Word) and just change yours to look the same as the example one then save it. You should only have to change the numbers. Flash the new recovery then copy the ROM as a zipped folder onto your sd card using a card reader if possible. Boot into recovery then select install zip from SD card, select your file and there you go, one working HD2 with Android
mistrK said:
What do I exactly edit?? Where is the CWM folder?? I still do not get this part at all, can someone guide me through it..
I flashed the recovery size through the HDToolKit...
Also, when putting the ROM on the SD Card, Do I have to take out the SD and put the ROM on that way with a adapter on my PC, OR can I just boot into recovery from MAGLDR and then connect my phone via USB with the SD inside and transfer it that way??
Click to expand...
Click to collapse
Ok I attached the recovery that I use with Team Blue Droid (credits to Dansta for porting it for us)
Open that .7z file and extract the folder to somewhere on your computer. Open the folder and inside you will see a bunch of files (one of which is the flash.cfg).
Now right click that and edit it with either notepad or notepad++ and adjust the recovery size as need for the rom of your choice. Save it and then while booting into MAGLDR connect your phohne to your PC.
Select the Daf.exe file and let it run, once completed you will have successfully flashed your recovery. Just boot into recovery from MAGLDR and then select mount usb (I believe that is the option). Then you can mount your sdcard and copy the rom that way. Once done just flash the rom with the install zip from sdcard option.
Post if you have more questions
HI,
First I've written a guide to magldr and clk, so if you want a little extra info it may help.
Second, I would recommend the program called "HD2 Toolkit" Their is a link to it also in my guide.
You need to consider updating to magldr 1.13 if you are going to use magldr, things will just work better with the latest version. Also unless you have a very good idea of what you're doing, the new clk1.5 rc1 is probably your best bet, it makes everything so much simpler.
But back to your magldr problem and the hd2 toolkit program, this program is an automatic flasher for the hd2, magldr clk and cwm.
OK thanks. What Roms do u reckon I download?? I want all the general features and Appstore..
mistrK said:
OK thanks. What Roms do u reckon I download?? I want all the general features and Appstore..
Click to expand...
Click to collapse
You know it really depends on your preference as there is a wide range. There are Sense roms (2.1-3.5) AOSP roms, CM7 roms, MIUI roms, and CM9/ICS roms. The choice is really up to you
OK thanks alot for the help guys, learnt alot. Managed to sort it all out and installed this Rom on it, everything looks to be working fine.
Thank You!
mistrK said:
OK thanks alot for the help guys, learnt alot. Managed to sort it all out and installed this Rom on it, everything looks to be working fine.
Thank You!
Click to expand...
Click to collapse
Awesome, which rom did you end up going with?

Categories

Resources