Related
Hey guys,
this is my first post and my problem is as follows:
I had ICS 4.0.x on my galaxy tab 10,1 P7500, I then installed CWM 5.5.0.4. but had a rolling window. I then continued to install a bootloader (here: http://forum.xda-developers.com/showpost.php?p=27830023&postcount=41) with the appropriate bootloader for the p4. This fixed the rolling recovery and allowed me to install CM10 using CWM.
But my current problem is when the device goes on sleep mode and I wake the device up the screen is scrambled, can anyone tell me how to fix this?
Thank you in advance
The only fix i found is for HC
http://forum.xda-developers.com/showthread.php?t=1680738
Edit:
I fixed the rolling screen issue after screen unlock with pershoot's help, thanks again pershoot!
Maybe it will also work for you , here we go:
If you have installed the latest cm10 build, there is only one issue for the p4wifi , you must be on the US ICS Bootloader .
So download the recovery.tar.md5 from here:
http://droidbasement.com/galaxy/roms/cm10/p4wifi/recovery.tar.md5
Than go into download mode and flash this recovery using ODIN, (select pda and look for this file where you safed it, than click start)
Than, download the right US ICS Bootloader here:
http://droidbasement.com/galaxy/roms/cm10/p4wifi/US_LPL_4.0.4_bootloader.zip
Flash this also via ODIN in the PDA section, this may take a little longer, don't panic...
After that, the tablet will reboot and it should work... don't blame me if it didn't, but i had this rolling screen on almost every rom, and everything is fixed now...
I wish you good luck because i know it IS very annoying..
Thanks for the reply DefQon, I agree I think this is most annoying errors I have ever gotten.
I also searched high and low and could only find the fix for HC.
DefQoN_BE said:
I have EXACT the same issue, i'm running the latest cm10 build from droidbasement.com, if anyone can please help us???
The only fix i found is for HC
http://forum.xda-developers.com/showthread.php?t=1680738
I wish you good luck because i know it IS very annoying..
Click to expand...
Click to collapse
I have tried this method and works perfectly!
Thank you sooo much!!!
I am afraid to put a rom on my 10.1, i love it though!
blacks10 said:
I am afraid to put a rom on my 10.1, i love it though!
Click to expand...
Click to collapse
There's nothing you should be afraid of there is a fix for everything, and if you can't find it? There are nice poeple out there who wants to solve your problrm on xda developers forum
@drefcom: you're welcome
Please help - When turning off the Screen Android 4.1.1 will not come back on
I have the following problem.
When I install one of the latest rom e.g.
[ROM] [JB] [P4--P4WIFI--P4VZW]
4.1.2 AOKP for the Galaxy Tab 10.1
or
[ROM][JB][CM10] Android 4.1.1 - CyanogenMod 10 Preview
then I have this problem:
When I turn off with the "Power"-Hardbutton, then it turns off, but it does not turn back on. The screen stays black.
With the Rom ...
[ROM][JB][CM10] Android 4.1.1 - CyanogenMod 10 Preview "cm-10-20120814-EXPERIMENTAL-p4.zip" from August everything works fine.
Since I had this flickering problem I flashed the bootloader before I installed all these Roms.
But one works and all new ones don't.
Anyone has a idea what to do?
thx
drefcom said:
Thanks for the reply DefQon, I agree I think this is most annoying errors I have ever gotten.
I also searched high and low and could only find the fix for HC.
I have tried this method and works perfectly!
Thank you sooo much!!!
Click to expand...
Click to collapse
:good:
Thanks this helped me fix a mates Galaxy Tab 10.1
I was starting to pull my hair out and this worked so well.
Takes no time to do and no need to reflash the rom.
Hi guys.
speersie said:
:good:
Thanks this helped me fix a mates Galaxy Tab 10.1
I was starting to pull my hair out and this worked so well.
Takes no time to do and no need to reflash the rom.
Click to expand...
Click to collapse
i tried this method, but at second flashing (bootloader.zip) i get "0 succeed/0 failed" and still i get that scramble, and have to reboot all the time.
Any ideas?
Thanks in advance.
Cheers!:good:
Problems solved
I solved my problems. I installed the "custom" bootloader for each Rom and the "black screen" problem is now gone.
Thanx anyway.
drefcom said:
Thanks for the reply DefQon, I agree I think this is most annoying errors I have ever gotten.
I also searched high and low and could only find the fix for HC.
I have tried this method and works perfectly!
Thank you sooo much!!!
Click to expand...
Click to collapse
I have tested the fix for weeks now and it worked great.
Except, this afternoon my tablet randomly restarted and now won't go past CM 10 boot screen.
Any idea whether reflashing the ROM without wyping, purely just installing (as is) CM10 M2 from CWM? Or any other ideas?
I have tried clearing the cache and the dalvik cache. I then tried doing a factory reset but it doesn't seem to proress. I thought if I can do a factory reset then reinstall the ROM I might get it to work but I can't install the ROM as it says "Error (Status 7)?
I have tried formatting the /data in attempt to get the factory reset to work but this also freezes.
Currently, my tablet is in an infinite loop cycle and I cannot change the ROM or do a factory reset.
Thanks, you guys have really been helpful!
drefcom said:
I have tested the fix for weeks now and it worked great.
Except, this afternoon my tablet randomly restarted and now won't go past CM 10 boot screen.
Any idea whether reflashing the ROM without wyping, purely just installing (as is) CM10 M2 from CWM? Or any other ideas?
I have tried clearing the cache and the dalvik cache. I then tried doing a factory reset but it doesn't seem to proress. I thought if I can do a factory reset then reinstall the ROM I might get it to work but I can't install the ROM as it says "Error (Status 7)?
I have tried formatting the /data in attempt to get the factory reset to work but this also freezes.
Currently, my tablet is in an infinite loop cycle and I cannot change the ROM or do a factory reset.
Thanks, you guys have really been helpful!
Click to expand...
Click to collapse
After hours of trying I have found a solution.
I previously had done backups. I tried each one until one started restoring. It completed quite a lot till it froze and I restarted into recovery.
I did a cache wipe and dalvik cache wipe and could then complete a factory reset.
It has now booted completely into ICS where I can now flash CM10 again.
The tablet works normally as you would expect on ICS. I booted into recovery and tried to flash CM10 M2 for the GT-P7500 but I still get a error, status 7.
Anyone experienced this?
drefcom said:
After hours of trying I have found a solution.
I previously had done backups. I tried each one until one started restoring. It completed quite a lot till it froze and I restarted into recovery.
I did a cache wipe and dalvik cache wipe and could then complete a factory reset.
It has now booted completely into ICS where I can now flash CM10 again.
The tablet works normally as you would expect on ICS. I booted into recovery and tried to flash CM10 M2 for the GT-P7500 but I still get a error, status 7.
Anyone experienced this?
Click to expand...
Click to collapse
Status 7 usually indicates the wrong update file, are you sure you are flashing the right ROM for the 7500?
Perhaps try to flash the recovery and bootloader first and then the right ROM and see what happens?
DefQoN_BE said:
Status 7 usually indicates the wrong update file, are you sure you are flashing the right ROM for the 7500?
Perhaps try to flash the recovery and bootloader first and then the right ROM and see what happens?
Click to expand...
Click to collapse
The thing is it is the exact same file I used to flash the previous time.. I first updated my recovery and bootloader before flashing and still get the error. Thanx for the thought though.
Phone stuck on "Samsung - Custom" screen after creating TWRP backup. Help please?
I have an ATT S4, that has had CM 10.1 on it running flawlessly pretty much since nightlies started to get released. Decided to try going back to some TW based ROMs. Running the latest nightly, loaded up TWRP, created a backup, as I usually do before swapping roms. Created the backup fine, now it won't boot, it just sits at the Samsung screen with the lock and Custom message. Wiped cache\dalvic, even tried restoring from the backup I just created. Nothing. Tried it with the phone plugged into the computer and without being plugged in (I think I recall it being plugged into USB could cause issues in the past), and still nada. Tried pulling the battery and rebooting about 10 times. Can get into recovery and odin mode perfectly fine still. Any suggestions or ideas? Thanks
Simonzi said:
I have an ATT S4, that has had CM 10.1 on it running flawlessly pretty much since nightlies started to get released. Decided to try going back to some TW based ROMs. Running the latest nightly, loaded up TWRP, created a backup, as I usually do before swapping roms. Created the backup fine, now it won't boot, it just sits at the Samsung screen with the lock and Custom message. Wiped cache\dalvic, even tried restoring from the backup I just created. Nothing. Tried it with the phone plugged into the computer and without being plugged in (I think I recall it being plugged into USB could cause issues in the past), and still nada. Tried pulling the battery and rebooting about 10 times. Can get into recovery and odin mode perfectly fine still. Any suggestions or ideas? Thanks
Click to expand...
Click to collapse
There are no less than a dozen similar threads about similar problems already. Have you looked at those threads for a possible solution yet? You can find them by using the search function or better yet just doing a visual search of the first few pages of the "General" and "Q&A" sections. Good luck.
Sounds like a ROM and kernel issue. Try flashing a ROM with a loki'd kernel.
Tylorw1
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Tylorw1 said:
Sounds like a ROM and kernel issue. Try flashing a ROM with a loki'd kernel.
Tylorw1
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
I don't see how that could be the case. I didn't flash anything. I just loaded TWRP, created a backup, and rebooted my phone. No ROM\kernel change. Nothing more than creating a backup in TWRP.
scott14719 said:
There are no less than a dozen similar threads about similar problems already. Have you looked at those threads for a possible solution yet? You can find them by using the search function or better yet just doing a visual search of the first few pages of the "General" and "Q&A" sections. Good luck.
Click to expand...
Click to collapse
I tried searching, the closest one I could find on the first few pages was this one. I just didn't see any specific to my situation because nothing was flashed. Like my response to Tylorw1, all I did was boot into recovery, create a backup, and reboot my phone. Didn't flash a ROM, change a kernel, format anything, etc...
I has this same problem... It happened after every single reboot after flashing various ROMs or anything.. I gave up and went back to CWM and haven't had the problem since :good:
Sent from my SGH-I337 using xda app-developers app
Simonzi said:
I have an ATT S4, that has had CM 10.1 on it running flawlessly pretty much since nightlies started to get released. Decided to try going back to some TW based ROMs. Running the latest nightly, loaded up TWRP, created a backup, as I usually do before swapping roms. Created the backup fine, now it won't boot, it just sits at the Samsung screen with the lock and Custom message. Wiped cache\dalvic, even tried restoring from the backup I just created. Nothing. Tried it with the phone plugged into the computer and without being plugged in (I think I recall it being plugged into USB could cause issues in the past), and still nada. Tried pulling the battery and rebooting about 10 times. Can get into recovery and odin mode perfectly fine still. Any suggestions or ideas? Thanks
Click to expand...
Click to collapse
what version of twrp? if it is 2.6.?.? then get off of it, also, what I did was pull battery for 3min, it booted fine....go back to early version of twrp...
STVERDI said:
I has this same problem... It happened after every single reboot after flashing various ROMs or anything.. I gave up and went back to CWM and haven't had the problem since :good:
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I've wanted to go back to CWM. That's what I had on my S3. Only thing stopping me, is all my nandroid backups for my S4 are done with TWRP, and I don't want to run into a situation where I need them, and them not being compatible
TheAxman said:
what version of twrp? if it is 2.6.?.? then get off of it, also, what I did was pull battery for 3min, it booted fine....go back to early version of twrp...
Click to expand...
Click to collapse
Nope, still on 2.5.0.2. Finally, after a third complete wipe/format and restore from the back I had created (the one that started the whole issue), it works fine. Such a huge pain in the ass.
a user had to boot back into twrp and wipe data/factory reset yesterday to fix this issue.
Simonzi said:
I've wanted to go back to CWM. That's what I had on my S3. Only thing stopping me, is all my nandroid backups for my S4 are done with TWRP, and I don't want to run into a situation where I need them, and them not being compatible
Nope, still on 2.5.0.2. Finally, after a third complete wipe/format and restore from the back I had created (the one that started the whole issue), it works fine. Such a huge pain in the ass.
Click to expand...
Click to collapse
And you have to be ****ing kidding me. I rebooted into recovery while typing my initial response, just to verify I was still on the 2.5.x.x TWRP. Booted up TWRP, verified that, choose "Reboot System", and same thing. Back to sitting at the Samsung screen. Nandroid backups or not, ditching TWRP as soon as I get it able to boot back up.
Even worse off now than when I started. After my last post, where my phone was doing the same "stuck on Samsung logo" thing, just from booting into TWRP, I decided to swap to a different recovery. Searched for "switch from TWRP to CWM", and found my own post I had made a few months ago, but never went through.
Following those instructions now, I decided on the PhilZ CWM. Head over to that thread, grab the loki'd zip, load up TWRP, and flash the zip. Now I can't even boot into recovery!! It just freezes on the Samsung screen with the blue "recovery booting" text.
Can still get into download mode, so I tried using ODIN to flash PhilZ jflteatt.tar.md5 file, and it fails.
At this point, waiting for the stock 1.6 firmware package to download, so I can just ODIN that.
If anyone has any other suggestions though, they'd be great. Have an hour to try while waiting for that to download
somebody had mentioned this...
http://forum.xda-developers.com/showpost.php?p=44629460&postcount=8
make sure you have the correct firmware and proceed as you are. likely your best bet.
Simonzi said:
Even worse off now than when I started. After my last post, where my phone was doing the same "stuck on Samsung logo" thing, just from booting into TWRP, I decided to swap to a different recovery. Searched for "switch from TWRP to CWM", and found my own post I had made a few months ago, but never went through.
Following those instructions now, I decided on the PhilZ CWM. Head over to that thread, grab the loki'd zip, load up TWRP, and flash the zip. Now I can't even boot into recovery!! It just freezes on the Samsung screen with the blue "recovery booting" text.
Can still get into download mode, so I tried using ODIN to flash PhilZ jflteatt.tar.md5 file, and it fails.
At this point, waiting for the stock 1.6 firmware package to download, so I can just ODIN that.
If anyone has any other suggestions though, they'd be great. Have an hour to try while waiting for that to download
Click to expand...
Click to collapse
Stock 1.6 firmware package?
Make sure you get the correct firmware? Go to SamMobile and get the stock firmware from there or go to Adam Outlers "Stock firmware ODIN" thread in the General section (the AMDL firmware link is in that thread you just have to look for it).
scott14719 said:
Stock 1.6 firmware package?
Make sure you get the correct firmware? Go to SamMobile and get the stock firmware from there or go to Adam Outlers "Stock firmware ODIN" thread in the General section (the AMDL firmware link is in that thread you just have to look for it).
Click to expand...
Click to collapse
Yeah, I meant 1.6gb firmware package. Just forgot the "gb". That's what I'm currently downloading, but trying to recover it with Kies while waiting.
I would like to report I had the same problem.
After changing roms and making a nandroid, and then deciding to switch roms again, I ran into the stuck at Samsung Custom with a lock boot screen. Most roms would boot up once, but a restart or power down would lead to being stuck. I was flashing through TWRP.
I went into TWRP and flashed OUDHS recovery which overrode TWRP and wiped/flashed through OUDHS a new rom.
Problem solved.
S3 at&t stuck in TWRP booting screen.
xBeerdroiDx said:
a user had to boot back into twrp and wipe data/factory reset yesterday to fix this issue.
Click to expand...
Click to collapse
Im new to custom roms, I pressed ok for an update on my phone, after the update was complete my phone shut off and booted into TWRP and now I can't get back to my android screen nor make calls etc. HELPPPPPPPP PLEASSSSSEE I have been trying to fix my phone since july and I have been using this cheap phone that don't even get internet. I have an S3 1747 at&t
Lnjames said:
Im new to custom roms, I pressed ok for an update on my phone, after the update was complete my phone shut off and booted into TWRP and now I can't get back to my android screen nor make calls etc. HELPPPPPPPP PLEASSSSSEE I have been trying to fix my phone since july and I have been using this cheap phone that don't even get internet. I have an S3 1747 at&t
Click to expand...
Click to collapse
Wrong forum. Please go to the s3 section with your question.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Had this problem just now, solved it by fixing permissions.
I am running an MDL based S4, and screwed the pooch. I was going to wipe the internal storage and made the mistake of doing it through TWRP 2.5. Now, I have the same problem of being stuck on the custom boot screen. I have tried to change from TWRP to OUDHS Recovery, but still boot loops to Custom screen. I have tried fresh installs of 4.2 ROMs and 4.4.2 Google Editions. Do I need to flash via ODIN?
Flame away....I know better than this!!!!
Help would be greatly appreciated.
Sent from my GT-N8013 using Tapatalk 4
First time flashing CM, and I may have messed up.
I rooted, installed TWRP, everything went perfect. I made a backup, and then tried to do a factory wipe. The wipe ended with the messages "unable to mount /system", "... /cache" and another one. I still tried to flash, and it just immediately got stuck, nothing happened. I rebooted, and everything worked fine. It was the Samsung stock image and all my apps were still there. I'm assuming it just didn't wipe at all.
I then went full retard mode, and tried to do a restore. I wanted to be sure my phone wouldn't fail on me in the recent future because some random stuff may have been partially wiped or something. Feel free to tell me I have the IQ of a chimp.
This completely messed things up, as it just got stuck at "Restoring System...". Eventually I restarted it with the power button. Now it can't boot normally, it can't boot into recovery mode, which just leaves download mode.
Any way I can fix this and subsequently install CM properly? I'm using TWRP 2.6.3.0. I've been told it's recommended to use 2.5, as the other version may have some issues (including not being able to recognize partitions). Only download mode still seems to work, so maybe there's a way to flash my phone back into the living world?
Versions:
Team Win Recovery Project 2.6.3.0
CyanogenMod 10.1.3 (RC2 jfltexx)
Thanks!
No idea really but maybe try to flash default rom/recovery etc with odin?
I've had this problem. Seeing as you only have download mode you have to flash a stock Rom and start again. Recoveries for our phone are still I development. Use official CMW to install CM, using links in Op.
Sent from my GT-I9505 using XDA Premium 4 mobile app
HANDSY said:
I've had this problem. Seeing as you only have download mode you have to flash a stock Rom and start again. Recoveries for our phone are still I development. Use official CMW to install CM, using links in Op.
Click to expand...
Click to collapse
I got the Samsung stock ROM of july, flashed it using download mode, and everything was back! I then rooted it again, and installed CMW (see versions below). I went into recovery, and tried to do a backup. It told me it failed: "Error while making a backup image of /data!". I then wondered if it may have been due to a lack of storage (which could very well be, as that was the issue before and the old backup by Teamwin was probably still on it somewhere), so I rebooted my phone. That's when it just failed and kept showing the Samsung logo at boot. I tried flashing my ROM again, again the logo. Then I did a factory reset using the regular recovery (cache and data reset), which fixed it. Now all my apps and data are gone, but that's no problem.
I'm back at the unrooted Samsung stock image now. Any ideas what I did wrong? These were the versions I used:
CF-Auto-Root-jflte-jfltexx-gti9505
i9505-cwm-recovery-6.0.3.2(0611)
Odin3 v3.07
I did nothing more than root, install CMW, try a backup and then it all went to ****. I'm surprised a backup can even do that.
Mmm I'm not too familiar with the internal workings of backups. Perhaps something was corrupted during flashing? Glad to hear that you have got your phone working again. There is an updated version of CMW somewhere in the original development thread.
Sent from my GT-I9505 using XDA Premium 4 mobile app
i've had the exact same issue.
I did go back to stock firmware and recovery, rerooted(chainfire) and installed the latest CWM 6.0.3.6.
Then, i did download Jamals Google play 4.3 rom, placed it on my SDcard and did follow the instructions. Works like a charm, and i've got noe clue what happened to my phone. however, it works now.
Chillzone said:
i've had the exact same issue.
I did go back to stock firmware and recovery, rerooted(chainfire) and installed the latest CWM 6.0.3.6.
Then, i did download Jamals Google play 4.3 rom, placed it on my SDcard and did follow the instructions. Works like a charm, and i've got noe clue what happened to my phone. however, it works now.
Click to expand...
Click to collapse
I tried CMW 6.0.3.6 and the Google Play 4.3 ROM as you said, and it works perfectly! I didn't try a backup this time, as it didn't exactly have anything to back up anymore.
Finally my precious vanilla Android again, I missed it since I switched from my Galaxy Nexus to my S4. Thanks a lot guys!
Edit: I do seem to be having one issue. Quite frequently after it's booted, and I enter the SIM pin, the message "Unlocking SIM card..." stays there indefinitely. I can use the phone but the message covers everything up. This doesn't always happen, but quite often. I've read some ROMs can't handle SIM lock, like CM. This is a Google Play edition, however. Is it normal that this doesn't work?
I can seem to fix it by holding the power button, and choosing "Unlock SIM" from the menu. I guess it's not that bad as I don't often reboot my phone.
Hi all,
Recently I've had a few troubles with flashing ROMS, to the point where I cant start my phone without it rebooting. I've been using CWM PhilZ 6.0.4.4, GT-I9505 and I did a full wipe everytime.
Originally I was on Omega 10 and decided to try out a new ROM (phone kept dying at 15% for some reason as well). Flashed PACman ROMs latest nightly and had some troubles getting past the set up as it froze every time, and when I tried rebooting it, it would simply not start. It was suggested to upgrade my recovery, so I did so from PhilZ CWM 3.0.3.3 to 3.0.4.4. Tried it again and it worked fine, but due to my own clumsiness I accidentally restored system data from Omega to PACman. Obviously it wouldn't start properly after that, reflashed again and was very careful to only restore apps (restored SMS as well as .xml). Everything was fine except a few bugs here and there, but then I rebooted it and it just wouldn't start.
After that I tried cyanogenmod, as I thought it would be more stable. Pretty much same thing happened, less bugs but when I tried rebooting it just wouldn't start.
Given up by this point, I tried reflashing Omega v10. It worked perfectly for a few hours, flashed the latest 3minit framework and ausdim kernel. The next day, my phone suddenly died at 42% and when I try to start it up it gets stuck at the Omega logo. Went into recovery, tried doing full wipe again and cant get past setup without it turning off. Furthermore, when I try to reflash, it just unpacks the zip but turns off randomly.
I'm not quite sure what to do next, I'm thinking it's my recovery not doing wipes properly since when I try to wipe dalvik it says "path not found", and if I try to reboot with recovery it says "root may have been lost, would you like to root?"
Sorry for the whole wall of text, just thought all the information would be better than not enough! If anyone could help it would be greatly appreciated as I cant even access my phone currently
Sent from my GT-N5110 using Tapatalk
Battery
Williamharv said:
Hi all,
Recently I've had a few troubles with flashing ROMS, to the point where I cant start my phone without it rebooting. I've been using CWM PhilZ 6.0.4.4, GT-I9505 and I did a full wipe everytime.
Originally I was on Omega 10 and decided to try out a new ROM (phone kept dying at 15% for some reason as well). Flashed PACman ROMs latest nightly and had some troubles getting past the set up as it froze every time, and when I tried rebooting it, it would simply not start. It was suggested to upgrade my recovery, so I did so from PhilZ CWM 3.0.3.3 to 3.0.4.4. Tried it again and it worked fine, but due to my own clumsiness I accidentally restored system data from Omega to PACman. Obviously it wouldn't start properly after that, reflashed again and was very careful to only restore apps (restored SMS as well as .xml). Everything was fine except a few bugs here and there, but then I rebooted it and it just wouldn't start.
After that I tried cyanogenmod, as I thought it would be more stable. Pretty much same thing happened, less bugs but when I tried rebooting it just wouldn't start.
Given up by this point, I tried reflashing Omega v10. It worked perfectly for a few hours, flashed the latest 3minit framework and ausdim kernel. The next day, my phone suddenly died at 42% and when I try to start it up it gets stuck at the Omega logo. Went into recovery, tried doing full wipe again and cant get past setup without it turning off. Furthermore, when I try to reflash, it just unpacks the zip but turns off randomly.
I'm not quite sure what to do next, I'm thinking it's my recovery not doing wipes properly since when I try to wipe dalvik it says "path not found", and if I try to reboot with recovery it says "root may have been lost, would you like to root?"
Sorry for the whole wall of text, just thought all the information would be better than not enough! If anyone could help it would be greatly appreciated as I cant even access my phone currently
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
Seems to me that you are having battery issues. You might need to get a replacement. If that doesn't work you could try flashing a pre-knox ROM though ODIN 3.04. This would mean starting from scratch, but it could be your solution.
Quick question. Are you downloading the ROMs with your phone or downloading them with your computer then moving them to your phone via usb? because it might be your pc's/usb fault.
I also think there's a problem with your battery, it might need to be replaced.
ebahena said:
Seems to me that you are having battery issues. You might need to get a replacement. If that doesn't work you could try flashing a pre-knox ROM though ODIN 3.04. This would mean starting from scratch, but it could be your solution.
Quick question. Are you downloading the ROMs with your phone or downloading them with your computer then moving them to your phone via usb? because it might be your pc's/usb fault.
Click to expand...
Click to collapse
Thanks for the quick reply! Would the battery explain why my ROMS wouldn't start though? Such as how Omega got stuck at the logo. I will try using my friend's battery, or just keeping the phone on charge whilst doing it and see how that works.
Im sending them through Usb currently, is there any other way to get it on my phone as I can't turn it on to send it over wifi :/
Sent from my GT-N5110 using Tapatalk
Whenever you flash stock tar through Odin, the phone will restart by itself and wipe cache. After it does this, you should factory wipe and no more bootloop, or soft bricks. I would start from scratch if i were you. If you have working custom recovery installed., I would go in and do a format, not a wipe, but format the sdcard and restart into download mode and flash stock tar, cf auto root, and then flash a custom recovery. And then decide what rom to flash.
norml said:
Whenever you flash stock tar through Odin, the phone will restart by itself and wipe cache. After it does this, you should factory wipe and no more bootloop, or soft bricks. I would start from scratch if i were you. If you have working custom recovery installed., I would go in and do a format, not a wipe, but format the sdcard and restart into download mode and flash stock tar, cf auto root, and then flash a custom recovery. And then decide what rom to flash.
Click to expand...
Click to collapse
Thank you for the reply i just got home so I'll try this soon, would it be risky though since my battery and/or cable may be damaged, meaning if it turns off during flashing stock, I'll get a hard brick?
Update: just reflashed Omega whilst it was on a charger and it actually worked.
Does this suggest that the battery is damaged?
Sounds to me like a definite battery problem.
Samsung recalled batteries with a serial number starting with BD. have a look and check your battery mate.
Also check it's not swollen
Sent from my GT-I9505 using XDA Premium HD app
Obagleyfreer said:
Sounds to me like a definite battery problem.
Samsung recalled batteries with a serial number starting with BD. have a look and check your battery mate.
Also check it's not swollen
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
I just checked my battery, it does start with BD, and it does appear to be somewhat swollen.. I haven't noticed it before :l Could I just return it to Samsung for a replacement, without going back to stock ROM? I'm currently in Australia, haven't really seen a Samsung support center anywhere nearby.
Update: got my hands on a new battery, everything seems to be working great now. Flashed paranoid android, no reboots or any other problems.
Thank you so much to everyone who helped
So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.
rmngorelov said:
So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.
Click to expand...
Click to collapse
Restore from nandroid backup. I hope you made one. Try going into recovery do a factory reset and wipe all cache and data and what not and then install a ROM from Odin.
rmngorelov said:
So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.
Click to expand...
Click to collapse
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware): https://mega.co.nz/#F!0JdRkIZR!AqqKdbvba_Hpg5VrCmrbPw
i7vSa7vi7y said:
Restore from nandroid backup. I hope you made one. Try going into recovery do a factory reset and wipe all cache and data and what not and then install a ROM from Odin.
Click to expand...
Click to collapse
I restored to this stock ROM before and everything worked well. Currently I can't boot into recovery, Samsung flashes once and that's it, that's why I'm desperate the only thing I can do is boot in to download mode for odin.
silentdeath631 said:
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware):
Click to expand...
Click to collapse
Does it matter that I can't get into recovery to clear the cache first before trying new roms?
silentdeath631 said:
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware):
Click to expand...
Click to collapse
Maybe I'm doing something foolish but every time I try to download files from the link you gave I get a decryption error so I can't download them zip or original.
rmngorelov said:
I restored to this stock ROM before and everything worked well. Currently I can't boot into recovery, Samsung flashes once and that's it, that's why I'm desperate the only thing I can do is boot in to download mode for odin.
Click to expand...
Click to collapse
Just hold home power and volume up. Right when you see text at the top left let go. You have to have the right timing
i7vSa7vi7y said:
Just hold home power and volume up. Right when you see text at the top left let go. You have to have the right timing
Click to expand...
Click to collapse
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.
rmngorelov said:
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.
Click to expand...
Click to collapse
Depends what recovery you had and what version. I personally like Philz touch recovery but TWRP is good. Now wipe and flash a ROM my friend or restore a backup
rmngorelov said:
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.
Click to expand...
Click to collapse
im having similar issues. which version of TWRP worked for you?
thank you
fearthemarchx said:
im having similar issues. which version of TWRP worked for you?
thank you
Click to expand...
Click to collapse
I recommend flashing the newest one here using odin
http://teamw.in/project/twrp2
Then once you are able to boot into recovery go to wipe and perform both factory reset and format data. Then install whatever rom you like, I used Sprint Galaxy S4 SPH-L720 VPUFNAE (Androdi 4.4.2) found here
http://galaxys4root.com/galaxy-s4-stock-firmware/ (or maybe find a newer stock rom if this one gives you errors)
Just copy the zip file to the phone, boot into twrp, do wipe factory reset again, select install then select the zip in whatever directory and you should be good to go. Make sure you do a back up in twrp once you get the phone to boot so you can always revert to stock.
I hope I was thorough enough that some of the information was useful. Let me know if you need any more help.
only certain recoveries will stick. ive tried the most recent twrp, with no luck. only a few versions of philztouch work.
Sent from my LGL34C using XDA Free mobile app
fearthemarchx said:
only certain recoveries will stick. ive tried the most recent twrp, with no luck. only a few versions of philztouch work.
Sent from my LGL34C using XDA Free mobile app
Click to expand...
Click to collapse
Format with philztouch that works then try flashing a new stock rom with odin. That should bring everything back to stock including the recovery.
ive tried. when i flash rom via odin i only get a blue "recovery booting" at the top of boot screen. even when i only power on, not into recovery. im going to attempt to flash rom provided in previous post via philz.
Sent from my LGL34C using XDA Free mobile app
fearthemarchx said:
ive tried. when i flash rom via odin i only get a blue "recovery booting" at the top of boot screen. even when i only power on, not into recovery. im going to attempt to flash rom provided in previous post via philz.
Sent from my LGL34C using XDA Free mobile app
Click to expand...
Click to collapse
You're in download mode when you flash from odin right? If you your getting an error flashing, try a different stock rom after reformating/resetting to factory (it's crucial to clear the cache before trying a different rom). I had to try a few roms before I found one that worked.