Database Users

Flashing A Recovery Rom..

I have searched this forum multiple times and i can not find my answer so i am posting this hoping someone with some patience will help me.. when i followed these steps.. "III: Flashing a Custom Recovery
Flashing a custom recovery will make your life easier when flashing ROMs in the future.
1. Download this file: Recovery.zip
2. Extract file contents to your \tools\ directory of your Android SDK.
3. Open up a command prompt and go to your tools directory, and execute these commands:
•adb shell mount -o rw,remount /dev/block/mtdblock3 /system
•adb push recovery.img /sdcard
•adb push flash_image /system/bin
•adb shell chmod 755 /system/bin/flash_image
•adb shell flash_image recovery /sdcard/recovery.img
4. Success! You now have a recovery partition installed on your phone. You can access it by running "adb shell reboot recovery" or by powering off your phone, holding "Volume Up + Power On"
It says that what i have typed is not an executible file.. someone please help.

are you 100% sure that you extracted the file out of the zip and not just put the zip into the folder?

yea im sure

Are you typing out each command? or are you pasting them into your terminal? Also, what OS are you running ADB from, and have you had success with it before? Or is the eris your first android device
Also, you did the previous steps first correct? IE: you're ROOTED

there is an easier way posted by i think Zinfab it was something like.
su
adb shell
reboot bootloader
at this point make sure it says fastboot USB on the screen
then in the same window fastboot flash recovery recovery.img (make sure your recovery.img is in the same directory as all your SDK tools)
this worked for me when the method u posted didn't work

where do i type this stuff in at.. i have my phone plugged in usb debug checked i installed the usb driver update it and i have the recovery thing extraced in my tools folder now what do i use my computers command prompt or my phones command prompt

ashertheplague said:
where do i type this stuff in at.. i have my phone plugged in usb debug checked i installed the usb driver update it and i have the recovery thing extraced in my tools folder now what do i use my computers command prompt or my phones command prompt
Click to expand...
Click to collapse
did u set the enviromental variable? its not that important I'm just curious.
if not in command prompt first command would be
(directory to tools)\adb shell
"su"
"Reboot bootloader"
then once its in bootloader
(directory to tools)\"fastboot flash recovery (directory to recovery.img)"
now the quoted sections should be typed exactly as is, without the quotes, but you have to know your own directory.

when i type it in on my phone it says adb not found

whats that

ok my phone now is in fastboot usb mode what do i do know

as suggested, did you set the variable? type fastboot devices to see if its even working correctly, to start.

how do i get out of fastboot usb

Type in the command fastboot flash recovery recovery.img

ok now it says waiting for device

You didn't search that well.
http://forum.xda-developers.com/showthread.php?t=647974

well i went to that forum and it was still giving me problems.. but i got help from spence_moore so its all good

ashertheplague said:
well i went to that forum and it was still giving me problems.. but i got help from spence_moore so its all good
Click to expand...
Click to collapse
What step were you having a problem with? If there is something wrong I would like to fix it.

Im sorry

Hello,im sorry for asking all theese questions lately but i am really confused.could someone post how to adb push and adb shell from like the first cmd line.because i do
cd C:\android-sdk-windows\tools
adb remount
Remount failed no such file or directory
extra info. i am rooted i have recovery and su i have samsung driver installed usb debugging checked.thank you everyone i really appreciate all the help.

Can Any1 Help?

II5StarII Swag said:
Can Any1 Help?
Click to expand...
Click to collapse
Adb push is to send something to the phone. You needt to put that file in your tools directory on the computer, then navigate there as you demonstrated properly.
Adb push FILENAME /Location/
To access the shell
Adb shell
$ not root access
# root access
To mount the file system with th adb remount command, you need busybox installed. Otherwise you have to mount it from the shell (sorry don't have the long ass command memorized, but its all over here)
Sent from my SPH-D700 using XDA App

[Q] Renamed framework-res.apk and bricked my Kindle Fire

I already rooted my kindle fire, downloaded android market I loggedin using a google account. After that I was unable to change the google account. Browsed web and I saw the post of the video. I followed the instructions in the video.
steps followed: using root explorer, went to /system/framework and renamed framework-res.apk and and after I completed the renaming, the device crashed (or I clicked something; hence crashed?) and stuck in blank carrousel page.
So, I rebooted and all I get now if boot logo of 'Kindle fire'. It doesnt go any forward.
I connected to PC and I am able to see the device in ADB. But no root access in shell. So, any adb command I give I get back errors like: no permission; read-only folder, etc.
When I use the Kindle fire utility v0.9.3 and try to do temp root or root, I get
Error type 2 android.util.AndroidException: Can't connect to activity manager; is the system running?
adbd cannot run as root in production builds
PC detects the device as 'Android Composite ADB interface'. But cant do anything in adb. I can push files to /data/local/tmp folder. Thats about it.
adb shell mount is not allowed
when I do
adb shell mv /system/framework/framework-res.apk.bak /system/framework/framework-res.apk
I get:
failed on '/system/framework/framework-res.apk.bak' - Read-only file system
Can someone help rename this file back to original framework-res.apk?
Thank you very much;

renamedresfile said:
I already rooted my kindle fire, downloaded android market I loggedin using a google account. After that I was unable to change the google account. Browsed web and I saw the post of the video. I followed the instructions in the video.
steps followed: using root explorer, went to /system/framework and renamed framework-res.apk and and after I completed the renaming, the device crashed (or I clicked something; hence crashed?) and stuck in blank carrousel page.
So, I rebooted and all I get now if boot logo of 'Kindle fire'. It doesnt go any forward.
I connected to PC and I am able to see the device in ADB. But no root access in shell. So, any adb command I give I get back errors like: no permission; read-only folder, etc.
When I use the Kindle fire utility v0.9.3 and try to do temp root or root, I get
Error type 2 android.util.AndroidException: Can't connect to activity manager; is the system running?
adbd cannot run as root in production builds
PC detects the device as 'Android Composite ADB interface'. But cant do anything in adb. I can push files to /data/local/tmp folder. Thats about it.
adb shell mount is not allowed
when I do
adb shell mv /system/framework/framework-res.apk.bak /system/framework/framework-res.apk
I get:
failed on '/system/framework/framework-res.apk.bak' - Read-only file system
Can someone help rename this file back to original framework-res.apk?
Thank you very much;
Click to expand...
Click to collapse
You should be able to mount the system r/w with the proper command, hopefully someone will be here soon to give you the commands.

do you have fff & twrp available ?
if yes boot to twrp - there you have full adb availabe and you can copy your backup framework-res to the kf

same thing happened to me,but I made it worse and the computer wouldn't even detect the KF.I had to return it.
Sorry): I know how it feels

renamedresfile said:
I already rooted my kindle fire, downloaded android market I loggedin using a google account. After that I was unable to change the google account. Browsed web and I saw the post of the video. I followed the instructions in the video.
steps followed: using root explorer, went to /system/framework and renamed framework-res.apk and and after I completed the renaming, the device crashed (or I clicked something; hence crashed?) and stuck in blank carrousel page.
So, I rebooted and all I get now if boot logo of 'Kindle fire'. It doesnt go any forward.
I connected to PC and I am able to see the device in ADB. But no root access in shell. So, any adb command I give I get back errors like: no permission; read-only folder, etc.
When I use the Kindle fire utility v0.9.3 and try to do temp root or root, I get
Error type 2 android.util.AndroidException: Can't connect to activity manager; is the system running?
adbd cannot run as root in production builds
PC detects the device as 'Android Composite ADB interface'. But cant do anything in adb. I can push files to /data/local/tmp folder. Thats about it.
adb shell mount is not allowed
when I do
adb shell mv /system/framework/framework-res.apk.bak /system/framework/framework-res.apk
I get:
failed on '/system/framework/framework-res.apk.bak' - Read-only file system
Can someone help rename this file back to original framework-res.apk?
Thank you very much;
Click to expand...
Click to collapse
Try using 'adb remount' then try to rename it again.
if you get the 'Read-only file system' error again:
adb reboot
adb remount
try again
Sent from my Kindle Fire using xda premium

[Q] Editing Build.prop results in failure to boot [bricked]

As you may know, some Android games especially most Gameloft games are not compatible with the Kindle Fire. So in efforts to find a way to make certain Gameloft games to work such as Modern Combat 2 and Shrek Kart and others, I resorted to editing my build.prop in the systems folder to make my device compatible with the apps. So I copied the original build.prop file, renamed it, and saved it to my SD Card folder. I took the copy I made and I then replaced it with the build.prop from HTC Glacier. (I never knew what could possibly happen) So then to apply those settings you have to reboot the device. I rebooted the Kindle and now it won't boot up. It get's to the Kindle Fire screen when booting up but after several seconds it just shows a black screen. No physical damage has been incurred to it but I feel like my stupid mistake of modding the build.prop resulted in the Kindle Fire unable to boot up correctly. It also isn't recognized by the PC when I hook it up to a USB cable. So far I've found nothing that could help to solve this. I've seen a Factory Default Settings Cable which is a special cable to reverts the device to its factory default settings but I'm not too sure if that would work. I'm in desperate need of help as in I use my Kindle Fire for everyday work and play. Thanks.
EDIT: I've tried adb push and renaming and moving the build.prop into the /system/ but returns that it is a Read-File System Only. Also adb shell and su doesn't work as in it ends up with segmentation fault. I've tried to zergRush root it and permanently root it using KFU but it ends up with 'Cannot Access Package Manager. Is System running?' Also the mount -o rw,remount.....command doesn't work either as it says Permission Denied. All of this would be easy to accomplish if only it ADB allowed me to write onto the /system file.
EDIT**: The biggest issue I'm faced with is the permission settings that prevent my from editing anything. You cannot simply change it from RO to RW because apparently the ADB is not rooted. And I also can't root it because problems exist when accessing either Package Manager or Activity Manager. What I need is a way to access the /system files without a root (non-rooted). Either that or enable fastboot because I cannot access that either. On a reply on the second page is the resulting lines when changing bootmodes on the KFU.

Don't know how to fix your problem, but just wondering, did you just completely replace the kindle fire build.prop with the HTC glacier? Because you can't do that, it will, as you have learned, mess up your device.. Your supposed to edit the build.prop and just change a few things. Next time read up on the subject before deciding to mod the device you use everyday...

the cable you'r talking about is a "factory cable" it forces the kf to fastboot mode - it don't restore any settings !
you need fastboot mode to install fff (firefirefire - custom bootloader) and twrp (recovery)
do you allready have installed fff & twrp (or cwm) ?
if you have twrp installed and booted into then you have adb command available and can copy back the original build.prop

Did you remember to restore the read/write permissions to build.prop? It should be set to 644.

As already stated, your not supposed to replace the whole file, build.prop tells android which device you have, so now Android thought and configured itself to different hardware config. which is not available to it. Adb seems like the only option.

I should have really looked more into it before modifying the build.prop. I replaced the ENTIRE build prop with the build.prop of HTC Glacer. (I know, i know I was stupid) And referring to the factory cable, I don't think I'll resort to that: too time consuming. In regards to the last person that posted before me who said that my only option was ADB could you elaborate? Thanks for all your feedback.

gococogo321 said:
I should have really looked more into it before modifying the build.prop. I replaced the ENTIRE build prop with the build.prop of HTC Glacer. (I know, i know I was stupid) And referring to the factory cable, I don't think I'll resort to that: too time consuming. In regards to the last person that posted before me who said that my only option was ADB could you elaborate? Thanks for all your feedback.
Click to expand...
Click to collapse
Your going to have to use adb to basically remove the HTC Glacier build.prop and replace it with the original build.prop.
For example:
Adb remount <- allows you to mount system as rw
Adb pull /path-to-original/build.prop
Adb push build.prop /system
Adb shell chmod 644 /system/build.prop <- sets permissions to rwrr
Adb reboot
Sent from my Kindle Fire using xda premium

You dont have access to recovery? Either TWRP or CWM?

daggy1985 said:
Your going to have to use adb to basically remove the HTC Glacier build.prop and replace it with the original build.prop.
For example:
Adb remount <- allows you to mount system as rw
Adb pull /path-to-original/build.prop
Adb push build.prop /system
Adb shell chmod 644 /system/build.prop <- sets permissions to rwrr
Adb reboot
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
I tried doing that but it says something like Access Denied or Read-Only File System when i try to push the build.prop into it.

gococogo321 said:
I tried doing that but it says something like Access Denied or Read-Only File System when i try to push the build.prop into it.
Click to expand...
Click to collapse
Did you use the 'adb remount' command? Sometimes, when attempting to push a file to the system, I get the 'read-only file system' and I have to issue adb reboot followed by adb remount and then push the file again. It seems after a time the mount system as read write automatically goes back to read-only.
Sent from my ADR6400L using xda premium

Have you got TWRP or ClockworkMod?
Because you could flash a new rom then.

abd - root mode
Perhaps, running adb in root mode will
allow you to push the original build.prop
back. Then execute "adb remount / rw" to mount the
root directory as read/write. Hopefully you will be able to push
it then follow daggy1985's instructions.
* In Win 7, type "cmd " at the 'SEARCH/RUN' and hold
shift + ctrl while hitting 'Enter' to put yourself
in Admin mode which apparently makes adb work in root mode when you launch it.
* Xda-dev is the coolest site for Android that I have seen. Kudo's to everyone participating.

sum1nil said:
Perhaps, running adb in root mode will
allow you to push the original build.prop
back. Then execute "adb remount / rw" to mount the
root directory as read/write. Hopefully you will be able to push
it then follow daggy1985's instructions.
* In Win 7, type "cmd " at the 'SEARCH/RUN' and hold
shift + ctrl while hitting 'Enter' to put yourself
in Admin mode which apparently makes adb work in root mode when you launch it.
* Xda-dev is the coolest site for Android that I have seen. Kudo's to everyone participating.
Click to expand...
Click to collapse
Thanks but I have actually been running it from Administrator from the very beginning. I've used Kindle Fire Utility KFU and it says that ADB Server is Online and my Bootmode is 4000 but it says ADB root: No. And whenever I choose any bootmode whether it be Normal, Fastboot, or Recovery, it always shows this:
***********************************************
* Activating Normal (4000) *
***********************************************
Installing BurritoRoot, Courtesy of Jcase of TeamAndIRC!
1393 KB/s (1164225 bytes in 0.816s)
Error: Could not access the Package Manager. Is the system running?
Activating BurritoRoot...
Error type 2
android.util.AndroidException: Can't connect to activity manager; is the system
running?
Elevating the Shell...
* daemon not running. starting it now *
* daemon started successfully *
/data/local/tmp/BurritoRoot3.bin: permission denied
mount: Operation not permitted
mount: Operation not permitted
failed to copy 'files\rbfb' to '/system//rbfb': Read-only file system
Unable to chmod /system/rbfb: No such file or directory
Unable to chmod /system/rbfb: No such file or directory
mount: Operation not permitted
mount: Operation not permitted
***********************************************
* Root Activated *
***********************************************
The kindle is successfully running in root mode.
<idme> Invalid permission
reboot: Operation not permitted
Same goes for the Temp Burrito Root and installing FFF and TWRP. It always shows something about cannot access Package manager. I have no clue what the Package Manager even does but apparently I cannot find a solution to that.

I think you need to get a factory programming cable like we talked about on gtalk. I'm confident that will fix this.
Sent from my DROIDX using Tapatalk

I used android commander for windows, mounted system in TWRP and used android commander to copy a new working build.prop to the right place.
With a cable from my htc desire.

would make a little test:
issue "adb shell"
if you get a error message your up to a factory cable because the system shell is messed up and you have no possibility to get to fastboot mode to install fff & twrp
if you get a $ or # prompt you can resume and try "mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system" to mount system in read/write mode

daggy1985 said:
Your going to have to use adb to basically remove the HTC Glacier build.prop and replace it with the original build.prop.
For example:
Adb remount <- allows you to mount system as rw
Adb pull /path-to-original/build.prop
Adb push build.prop /system
Adb shell chmod 644 /system/build.prop <- sets permissions to rwrr
Adb reboot
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
hey, I've tried to remount my rooted galaxy y, fall in for same problem.but there show this message; "remount failed: Operation not permitted"
my device's usb debugging mode was off in last entire.
what I have to do now?

how did u edit build.prop in the first place if u don't have root and this might help
http://yaseminavcular.blogspot.com/2012/01/how-to-get-bricked-kindle-fire-back-to.html?m=1
Sent from my R800i using Tapatalk

[Q] installing app via cmd terminal?

Is it possible to install an app via cmd terminal?
if so, please show me tnx...

adb install nameofyourapk.apk

Place app in your adb folder
connect phone with usb and leave it
then type cd c:\adb (thats adb destination/folder)
adb remount
adb push nameofapk.apk system/app for example adb push titaniumbackup.apk system/app
And thats it :good:

Or you can use my application and do it without console:
http://forum.xda-developers.com/showthread.php?t=1881410