Database Users

All-In-One Auto-Root Script

I made this for all the people that seem to be having issues with rooting their phone, installing the recovery partition, and installing the new rom.
This is an all-in-one package. It's about 200MB. Includes the original root rom, recovery image, the new rom (2.1OTA rom that was just released today), as well as a few extras. It's a batch script to automate the entire process.
Here's the README file:
Code:
These are automated scripts to root your Eris phone with Android 1.5 (NOT 2.1 LEAK!!!!!)
YOU NEED THE ANDROID SDK IN ORDER FOR THIS TO WORK!
If you don't have the SDK working, visit guide on the forums for instructions.
INSTRUCTIONS:
Unzip this file to your \tools\ directory of your Android SDK. Then run one of the following files:
install_root.bat
------------------------
This script will do the following:
1) Install the root image onto your phone
2) Install the recovery partition onto your phone
3) Install the current rom using the recovery partition
install_extras.bat
------------------------
This script will do the following:
1) Install live wallpapers
2) Install the Nexus Launcher
3) Install the Nexus photo gallery
4) Remove HTC Lockscreen
5) Install wireless tethering
NOTE!
------------------------
1) NOT ALL LIVE WALLPAPERS YOU FIND IN THE MARKET WILL WORK!
2) You cannot use the Nexus photo gallery when in the Nexus Launcher, it will crash
These scripts were put together by GrdLock.
Credit for all of the included files goes to ivan, amon, jcase, and everyone else
who chipped in!
Install this by unzipping it into your \tools\ directory of your Android SDK, then run install_root.bat.
I'm not running Windows so I didn't test this, but I proof read it like 10 times, and I'm 99.99% sure it should work 100%. If anyone gets any errors using it, post and I'll fix them immediately. Make sure USB debugging is turned on before running it.
You can download the whole package here: http://www.multiupload.com/Y7UC8UU2JE
-------------------------------------------------------------------
If you just want the 2.1OTA rooted rom, you can download that here: http://www.multiupload.com/YP1BIUOF60 (this rom includes busybox, the otacert fix, and a few other minor things)
I also put together an update. This will update you to the new 2.1 OTA leak "official" without wiping. Wipe your dalvik and that's it. Do a nand backup first though just incase! http://www.multiupload.com/3OPZCD6NRA

GrdLock said:
I made this for all the people that seem to be having issues with rooting their phone, installing the recovery partition, and installing the new rom.
This is an all-in-one package. It's about 200MB. Includes the original root rom, recovery image, the new rom (2.1OTA rom that was just released today), as well as a few extras. It's a batch script to automate the entire process.
Here's the README file:
Code:
These are automated scripts to root your Eris phone with Android 1.5 (NOT 2.1 LEAK!!!!!)
YOU NEED THE ANDROID SDK IN ORDER FOR THIS TO WORK!
If you don't have the SDK working, visit guide on the forums for instructions.
INSTRUCTIONS:
Unzip this file to your \tools\ directory of your Android SDK. Then run one of the following files:
install_root.bat
------------------------
This script will do the following:
1) Install the root image onto your phone
2) Install the recovery partition onto your phone
3) Install the current rom using the recovery partition
install_extras.bat
------------------------
This script will do the following:
1) Install live wallpapers
2) Install the Nexus Launcher
3) Install the Nexus photo gallery
4) Remove HTC Lockscreen
5) Install wireless tethering
NOTE!
------------------------
1) NOT ALL LIVE WALLPAPERS YOU FIND IN THE MARKET WILL WORK!
2) You cannot use the Nexus photo gallery when in the Nexus Launcher, it will crash
These scripts were put together by GrdLock.
Credit for all of the included files goes to ivan, amon, jcase, and everyone else
who chipped in!
Install this by unzipping it into your \tools\ directory of your Android SDK, then run install_root.bat.
I'm not running Windows so I didn't test this, but I proof read it like 10 times, and I'm 99.99% sure it should work 100%. If anyone gets any errors using it, post and I'll fix them immediately. Make sure USB debugging is turned on before running it.
You can download the whole package here: http://www.multiupload.com/09DM1FI1D1
md5: 535c300411cd47acd319e667fee8cf16
-------------------------------------------------------------------
If you just want the 2.1OTA rooted rom, you can download that here: http://www.multiupload.com/5HH0H1M4T1 (this rom includes busybox, the otacert fix, and a few other minor things)
md5: 6d95e5e8846c6912fda42c54daa0cb34
I also made a kernel-only update that can be flashed without wiping anything: http://www.sendspace.com/file/5ptpmc
md5: cc4e95034dc7e8adaa776483251952bf
Click to expand...
Click to collapse
Thanks....I will be using this on the wifes (soon to be mine) phone tonite as with the new OTA update I now feel my phone is stable enough for her not to freak out over
appreciate your work....
does the script disable OTA's ?

rvpartsguy said:
Thanks....I will be using this on the wifes (soon to be mine) phone tonite as with the new OTA update I now feel my phone is stable enough for her not to freak out over
appreciate your work....
does the script disable OTA's ?
Click to expand...
Click to collapse
Yes, I built the otacert fix into the rom.

Thanks for all your work grid, and all the others that have worked on this. Just got a new refurb the other day and was going to tackle rooting this weekend, gonna make the task so much easier.

Can you please explain what was fixed? Thanks again for your work.

The current rom is a rooted rom using the new 2.1 leak that was just released today, which is SUPPOSEDLY the "official" 2.1 update from Verizon.

What setting should be used for the phone, HTC Sync, USB, Mount SD, or nothing?

Nothing. Just connect it to your USB, and enable USB debugging. Don't mount your sdcard.

Does the market work now?
(I recall hearing that the market wouldn't work because of the test/dev certificate that was in the leaked rom)

The market will work if it doesnt work now, itll work when the OTA comes out.

Grd, this looks fantastic. I've been patient so far, and haven't upgraded to the leaked or original rooted 2.1 builds, but with the news of the latest one (and initial reports saying that it's mostly bug-free), I'm ready to take the plunge. This should be a huge help to me.
A couple of questions:
Does the big package (the 200MB one) include jcase's ROM (bare-bones basic), or yours with the tweaks? I ask because you mentioned removing pdfviewer, which I use.
Also, has anyone else gone through this process yet? Call me timid, but I'm not too keen on being the first one.

K0CAW said:
Grd, this looks fantastic. I've been patient so far, and haven't upgraded to the leaked or original rooted 2.1 builds, but with the news of the latest one (and initial reports saying that it's mostly bug-free), I'm ready to take the plunge. This should be a huge help to me.
A couple of questions:
Does the big package (the 200MB one) include jcase's ROM (bare-bones basic), or yours with the tweaks? I ask because you mentioned removing pdfviewer, which I use.
Also, has anyone else gone through this process yet? Call me timid, but I'm not too keen on being the first one.
Click to expand...
Click to collapse
It includes my rom. You should be able to restore pdfviewer if you need it though. I can post the files in a bit.

Great. I was pretty sure that the apps could be reinstalled if needed, but wanted to confirm. I'm downloading the package now, so I'll keep you updated. I'm pretty excited about this, since I'm still at stock 1.5.

Issues, Well first It copied the PB image fine, it didnt reboot the phone i had to manually do it with vol -, now im on step two installing amons image, it transfers but it cant start files\flash_image, no such file or directory and then it cant chmod it cause its not there.

Could you copy/paste the command prompt text you're seeing? (you gotta right-click the cmd window and select Mark)

Installing Amon's Recovery Image.
1545 KB/s (3926016 bytes in 2.480s)
cannot stat 'files\flash_image': No such file or directory
Unable to chmod /system/bin/flash_image: No such file or directory
flash_image: not found
-
Finished
Your phone will now reboot and test the recovery partition.
Press any key to continue . . .

Ahh, crap...
http://www.sendspace.com/file/obtx2w
Download that file, put it in the \tools\files\ directory, then try again and let me know.
I think I got delete-happy removing some temp files and deleted flash_image by accident.

Worked great
I just went through the install.bat file and everything worked 100% just as promised. I have not installed any of the extras yet. Thanks for the great work!

flash_image was it worked a treat its in amon_ra now was trying manually and came across it missing, went to post it and you had just now

One suggestion before letting adb copy the 2.1 rooted img to the phone have it delete the PB so users dont accidently click on it. Just a lil cleanup to help things out. So far its flashing 2.1 rooted I will let you know about the first error, ill go back through it again and get it to recreate.

[ROM][STOCK][P7310] P7310UEKHA Stock Rom (US Retail)

Hey everyone - I figured this might help some folks. It is a CWM installable zip that will restore your system to a completely stock UEKHA (the US retail build for P7310). This includes the stock kernel and recovery image as well.
Heres the instructions:
1) Download this file: http://www.multiupload.com/1KRF1M4CQZ
2) Put the file on your internal storage.
3) Reboot into recovery
4) Execute the Wipe Data/Factory Reset option
5) Choose Install Zip from SD Card
6) Choose Choose Zip from SD Card
7) Select the P7310UEKHA_Restock_v1.zip
8) Sit back, wait about 5 minutes
9) Once the script completes and says "Done", reboot.
10) Welcome to a completely stock US Retail tab
Enjoy.

I just want to ask: Can we flash this on other 8.9s from other regions (namely, an Asian model)?
I'm used to how it is in Maemo where the only differences between firmwares is localization and some preinstalled programs.

Yes you could flash it onto another 8.9 as well, although it should be a P7310 (Wifi only). Just like Maemo, the only differences between regions are localizations and pre-installed apps.
This stock image would not support 3G functionality however, so it would be a bad idea to install it on a P7300.

That's great. Going to flash Clockwork and this once I pick up my P7310 on Tuesday.
Which reminds me - how are Samsung kernels built? I heard that they need to use an initrd (or can the modules be compiled straight into the kernel? or is there a kernel size limitation, which is why an initrd is needed?)

I am truly grateful for this as I rooted and debloated my Tab the very first day lol. This is a great step!

Just flashed my tab with the ROM, works great! Originally had asian ROM on the tab.

Thank you very much! I needed some of the stock original loadable modules after some prior tweaks .

Thanks for the good work!
I was checking the system script used, and I was wondering if this CWM preserve the file/folder permissions as out of the box state or is just 7777 state?

mramirezusa said:
Thanks for the good work!
I was checking the system script used, and I was wondering if this CWM preserve the file/folder permissions as out of the box state or is just 7777 state?
Click to expand...
Click to collapse
Permissions should be out of the box state...the system image was taken from my stock tab directly, and the extract script should leave all permissions in tact.

Hey alterbridge86, it's great to hear you have a GT 8.9 now, that's good news for us
Quick question, how did you dump the ROM and the recovery? I have a GT 8.9 3G from Orange France and I'd like to dump everything before installing CWM to be able to restore to stock if needed.
Thanks! And again, great work!

masterludo said:
Hey alterbridge86, it's great to hear you have a GT 8.9 now, that's good news for us
Quick question, how did you dump the ROM and the recovery? I have a GT 8.9 3G from Orange France and I'd like to dump everything before installing CWM to be able to restore to stock if needed.
Thanks! And again, great work!
Click to expand...
Click to collapse
I ended up dumping it using the CWM I posted in the other thread. The new clockworkmod stores its backups in .tar format, so it makes it really easy to manipulate. Simply create a backup, then if you're feeling adventurous, you can take this flashable zip, replace system.tar and boot.img with the ones created by your backup. The stock recovery is same on all devices, so you can leave the one that is in this package and itwill work for you

Sounds good, thanks I'll give it a try when I have a little more time to play

Hey guys, i did something really stupid today to my 8.9 p7310...I installed that Asia update to it and it placed the tab into a loop and crashes in the settings app when it first starts up. Cant access SD card to install this firmware. I need the Odin firmware to put back to stock I think. Any ideas?

shatty said:
Hey guys, i did something really stupid today to my 8.9 p7310...I installed that Asia update to it and it placed the tab into a loop and crashes in the settings app when it first starts up. Cant access SD card to install this firmware. I need the Odin firmware to put back to stock I think. Any ideas?
Click to expand...
Click to collapse
When you installed the Asian firmware at ODIN, did you remember putting the CSC, PIT, BOOTLOADER to their corresponding places along with the biggest file being at PDA? If you just used the PDA file and not the other files...there's your issue. Once you successfully ODIN, flash this specific CWM Recovery and then you can either choose Stock (this thread) or the Overcome ROM.

Yea just did the pda. The instructions only said the pda. Doesnt matter anyway i am back to stock used adb to load the stock zip to sdcard and loaded

shatty said:
Yea just did the pda. The instructions only said the pda. Doesnt matter anyway i am back to stock used adb to load the stock zip to sdcard and loaded
Click to expand...
Click to collapse
Good to know you made it. The same happened to another user. Those instructions aren't correct.
Sent from my GT-P7310

Help getting China based GT-7310 to US stock
Hello,
I recently bought a GT-7310 in China, and want to get this to stock US using your method. I had a question on step #2.
2) Put the file on your internal storage.
How do I get the file to the internal storage and where is that location? I don't see an /SDCARD folder anywhere when browsing the tab in Windows 7. I have the latest USB drivers installed. I tried to push the file to /SDCARD using ADB but Android SDK tools doesn't recognize my tab. Are there any other ways to get the file to internal storage?
Thanks.

zinzino said:
Hello,
I recently bought a GT-7310 in China, and want to get this to stock US using your method. I had a question on step #2.
2) Put the file on your internal storage.
How do I get the file to the internal storage and where is that location? I don't see an /SDCARD folder anywhere when browsing the tab in Windows 7. I have the latest USB drivers installed. I tried to push the file to /SDCARD using ADB but Android SDK tools doesn't recognize my tab. Are there any other ways to get the file to internal storage?
Thanks.
Click to expand...
Click to collapse
When you plug in the tab, it connects via MTP to Windows. Then you can only get to the internal storage, just drop it in there. You'll see all the default folders (music, videos, etc.) so you'll know your in the right place.

Thank you. I got the file to SD Card, went into recovery, executed the wipe data/factory reset option. After the wipe data/factory reset is complete, I selected the option "apply update from /sdcard". I selected that and I get the following error:
E:error opening /data/media: No such file or directory
Any ideas?
Thanks.

You need to use CWM recovery, not the stock recovery.

[TELUS T959D FASCINATE][NOT ACTIVELY MAINTAINED-last updated 04.29.13]One Stop Shop

Hi and welcome Telus Fascinate T959D Users.
The purpose of this thread was to join a few T959D users together. When I flash a ROM I usually have at least 6 posts open on XDA - on different methods, kernels, etc. So I started collecting information and organizing it here. I have been updating based on feedback and adding more and different content especially when more users found us here.
Special thanks to everyone who has helped with this thread over the past few years - and special call outs to @Matt5606, @iwebsource, @finneginsfast, @moosehead11, @Dayfid, @karmatose, @bucknetbucky.
However, please note that we the contributors take no responsibilities for your phone or anything you do to it - this is simply a collection of helpful posts to get you started and continue having conversations - they are by no means offered as full proof guides, nor do they imply a warranty of any sort.
Now on the fun stuff, but first a simple FAQ.
Q. What is the T959D and what ROMs can I use on it?
The T959D is Telus' Galaxy S phone - known as a fascinate. What is confusing is this phone has almost nothing in common with the Verizon Fascinate - in fact flashing a fascinate ROM will brick your phone. Fortunately for us, our phone is VERY close to the International Version - the i9000 or galaxysmtd. Those are the ROMs we use on this phone.
Q. Is there a place where I can get files for my phone?
Yes - all through XDA you can use i9000 compatible ROMs, Kernels, modems. As well, we have a stock pile of files available to you - as you read the OPs you will find those and how to get them.
Q. Can I brick my phone?
Yes - but from my personal experience it is very hard to do this, and you can always get a USB jig that gets you to download mode (if you are soft bricked) - load one of the stock images and you are right as rain again.
A USB jig is a small piece of modded hardware that plugs into your USB port on your phone and forces it into download mode on start up - EVEN if it is SOFT BRICKED. A necessity for flashing. Lots of 'how tos' on how to create them out there if you have a spare cord, or just order one on EBay
http://www.ebay.com/sch/i.html?_nkw=usb+jig
For me, the place to use the most caution is using Odin - when placing files into the fields ensure they in the right place (measure twice, flash once ) as that is the biggest risk to flashing your phone. I think this is the greatest risk to hard bricking your phone which I am not sure you can recover from (I have only ever soft bricked my phone in which the USB jig saved my hide).
Q. I put on an ICS/JB ROM and now my IMEI is gone? What is that and how do I get it back?
Your IMEI is the unique identifier on your phone. The number is written down behind your battery - and that is what your phone should be displaying when you go to About Phone in Settings. Something happened with ICS/JB that it sometimes gets lost. To prevent that you need to back up your EFS folder.
1. You must be rooted.
2. You must have a file explorer that has root access (root explorer or ES File Explorer - although, if using ES ensure you have enabled root access and mounted /system in the preferences.
3. Find your /EFS/ folder at root (/).
4. Copy the EFS folder. Ensure you have ALL the files and ALL the subfolders (one will your IMEI). However, there can be hidden files in here, I would not worry so much about those, simply ensure you copy over the EFS folder itself - that should do it.
5. Move this to your removable SD card. Zip it, keep it on your PC, put in dropbox, ensure you have a copy for safe keeping.
And that is it - after flashing a new ROM, if you are missing your EFS or your IMEI number if wrong, just copy back the folder, reboot, and voila!
Q. GPS sucks.
Yes, yes it does. Do a search if you are adventurous there are hardware fixes. There's also faster fix in the play store and there are files here you can load as well - but its a known issue with the Galaxy S family of phones.
Q. What should I run on my phone?
Well, that is entirely up to you. The last official firmware you can get is 2.3.3. If you like very stable and do not need to have the latest, just a stable working phone with great battery - maybe try a good gingerbread ROM like Darky's or CM7.0 - Darky's will give you that Samsung feel (and still have the right firmware for the camera).
There are literally tons of options - go to the i9000 thread and see what the latest is. Most users here in this thread are on SlimICS, SlimBeam, CM10 or CM10.1. I have been running latest (nightlies) CM10.1 for some time combined with my favourite kernel Semaphore.
If you are going to flash a new JB ROM though, I suggest as your first flash stable CM 10.0 - this will be the base of your next ROM and many ROMs such as slim recommend you flash CM first just to set things up for yourself.
Q. So what now?
Read, read, and read. Go through this thread - go through threads of the ROMs you want to install - see what users are saying about it lately. And please - come to this thread and ask questions - we have a small but friendly and very helpful community - and remember if we help you, stay active on the thread so you can help someone else.
Cheers - and happy flashing

ICS/JB ROMS from Scratch (updated May 31 2013)
THANKS to @karmatose and @Dayfid for creating an ODIN flashable 2.3.3 - this means no more KIES (yes!) and creating a fresh stock ROM - here's the steps for this procedure... (Updated September 26, 2012)
Please note that the links below provided by Karma http://t959d.karmatose.org will work BUT you will need a username and password to download the files. Karma or myself can make the login and password available to you.
1. Download the KG2 package from here - http://t959d.karmatose.org/index.php/apps/files/download/Shared/stock_roms/T959TLKG2_Gingerbread.zip
2. Extract the archive to a folder on your PC using your archive app of choice. Mine is WinRAR.
3. Open Odin3 v1.7.exe (the one that is in the ZIP file)
4. Place the PDA, CSC and PHONE and PIT files in the proper boxes. Take absolute care to make sure you don't mix them up. Ensure that repartition is ticked 'on' in this case.
5. Put phone in download mode (vol down + power from off or download jig) and connect it to the PC
6. Click start and wait just under 3 minutes. The phone will restart and you should be back to stock 2.3.3
7. If your intention was to get to stock, you're done. If you want to go to ICS/JB and you *don't* have a backup of your EFS folder, go to step 8. If you do have a backup of your EFS folder, go to step 10.
8A. If you need to backup your EFS folder (HIGHLY RECOMMENDED), you need to root the phone. Flash the Speedmod kernel with ODIN (in the PDA field). The phone will reboot and get stuck in a boot loop at this point. Pull and replace the battery and place the phone in Recovery Mode by holding VOL+ and VOL- and pressing the power button. When the screen lights up, release the power button and continue to hold the volume rocker until you see CWM Recovery. Using the Vol+ and Vol- to navigate the menu, go to the Speedmod Advanced Options menu and press the power button to select it. Choose to root your phone.
8B. (Optional) Now that you have custom recovery, would not be a bad idea to make a nandroid backup of your phone. So go to backups, and create backup from the CWM Menu.
8C. Once that is complete, go back to the root menu and reboot the phone. Pull the battery out and put the phone back into download mode. Flash the stock 2.3.3 kernel back (also in the PDA field) in Odin. The phone should now be rooted. Let it boot. Hopefully you're greeted with a lock screen
9. Install ES Explorer from play (or APK), enable Root Settings in the settings menu then navigate up to root and copy your EFS folder to your EXTERNAL_SD card. Power down the phone, remove the SD card and copy this to your PC, Google Drive and some other backup source. Don't lose this folder.
10. Installing ICS / JB - Depending on what OS you want to go to, you're going to need to grab an appropriate kernel to do so. The best option seems to be Semaphore's i9000 kernels. If you're going to flash an ICS rom, grab the 1.3.0s .tar file. If you're going to JB, grab the 2.1.0s .tar file.
11. Download your ROM of choice. i9000 versions of SlimICS/SlimBean/CM9/CM10 work on the T959D. You will also need grab the .zip version of the Semaphore kernel (ICS / JB) you're using and a Modem of your choosing. KG3 works best for me, your mileage may vary. Place the ROM, .zip version of the Semaphore kernel you're using and the ES File Explorer APK on your internal SD card.
12. Open Odin again. Put the .tar'd Semaphore kernel file you just downloaded in the PDA field, ensure Re-Partition is UNCHECKED. Put your phone in download mode, connect it to the PC and click start. In a bit more than 10 seconds, your phone should reboot itself. Pull the battery out and replace it.
13. Put the phone in Recovery Mode by holding VOL+ and VOL- and pressing the power button. Release the power button as soon as the screen turns on but keep holding VOL+ and VOL- until CWM appears. Use the VOL+/- keys to navigate, PWR button to select. Go to "Install zip from sdcard", then "choose zip from internal sdcard".
14. Follow the directions to install your ROM. CM9/10 comes in one flashable .zip file whereas SlimICS/SlimBean comes in multiple files. Consult the documentation for your ROM to get specifics on how to install it. Note that if you are installing CM10, CM10.1, Slim 3.x + that the partition layout has changed. This means you will need to flash the ROM at least 3 times - once you will get an error 7, then flash again, and then again - after that you will have latest.
15. Once the ROM is done flashing, flash the Kernel .zip you placed on your External SD card the same way you flashed the ROMs. Then flash your modem .zip. Note that if you are using an 's' version of semaphore, and a non-patched ROM like CM (Slim is already patched) you will want to flash the big mem library patch which is attached below after flashing the kernel.
16. Go back to the CWM main menu and reboot the phone. You should boot into ICS / JB at this point with no issue. It might take a bit so be patient.
17. Verify your IMEI number. Hit the Menu button on your phone and select System Settings > About Phone > Status. Look at your IMEI. If there's a lot of 0's in it, you need to replace your EFS folder. Use Oi Explorer to access your External SD card and install the ES File Explorer APK. Enable *all* the Root options in the application settings and return to the file browser. Locate your EFS folder backup on your external SD (emmc), longpress on the folder and select "Copy To". Hit the navigate up button in the dialog box and select /. Press OK twice then reboot your phone. Your IMEI should be back to normal now.
18. Enjoy the fruits of your labour and customize the heck out of your new ICS / JB rom.
----
This is an alternate method from @bucknetbucky created this quick 'how to'. This will put you on stock GB and allow you to flash ICS from there.
Why start from GB? The bootloaders. When flashing from froyo you'll see lots of tips on pulling batteries and the first flash always not working - this won't happen from Gingerbread AND you'll get to keep the logo for the kernel for some added bling.
For those looking to flash from GB here is how to do it...
Get back to 2.3.3 stock
1 flash stock froyo via ODIN (tick repartition! - See the 'Essential Files' section above).
2 install samsung kies (should have this if you have this device- AND update it!)
3 update to GB using kies
Root your phone and back up EFS
Backing up EFS is vital. Essentially do this.
4. Download Super1click to root your phone and following the instructions (http://depositfiles.com/files/n0dcxce3t)
5 Install a file manager with root access and backup your efs folder by copying it to the internal sdcard then your computer (instructions in OP)
Note: this is one way to root your stock GB phone - you can also use the speedmod kernel (the version I use is older --- but works --- and is attached below) which has a root option under 'advanced' but has more steps. If you already have backed up your EFS though, you really do NOT need to do this step and skip to the steps below to flash your ICS ROM.
Finally INSTALL your ICS ROM
Now to flash the latest super duper ROMs from the super duper devs you will need to do the following...
1 copy glitch v14 kernel and the rom of your choice to your internal sdcard (The version linked below is the BEST version to accomplish this with)
http://www.box.com/s/tov06pvzkkqbmui6tcmi
2 flash via ODIN the speedmod kernel (gives you a custom recovery)
3 when it tries to boot pull the battery and then boot to recovery
4 flash the glitch kernel from recovery (again you are boot looping)
5 pull the battery and boot to glitch recovery and wipe data, clear cache and such then flash your ROM
6 copy your backed up EFS folder back to the phone to restore yout imei
Just some notes
Most ROMs will come with a compatible modem, however, if having modem issues - please see a few posts down on getting modems.
A complete list of ROMs for the I9000 by Android version can be found here (as well as kernels). Please note the update dates as that will indicate how much active support there is for the ROM.
http://forum.xda-developers.com/showthread.php?t=1837223

Gingerbread ROMs (Updated 03/11/2012)
In terms of loading GB ROMs I have had success with a few - namely Darky ROM (up to 10.4.2).
Credit to the original poster, but I always start with this how to on loading a ROM.
http://forum.xda-developers.com/showthread.php?t=923712
I do not execute every step, but essentially use it to get to stock along with the custom voodoo kernel which will give you root and custom recovery to load your custom ROM.

ROM and Kernel TWEAKS (Updated 08/28/2012)
GPS Tweak
This how to can you help you tweak GPS
http://forum.xda-developers.com/showthread.php?p=17081413
Note the multiple GPS.conf entries you can have for country (Canada) as well as region (North America).
Darky ROM tweak
When installing Darky ROM you will find the buttons for home and back no longer work. There is a simple fix for this as long as you have a root explorer (like ES File Explorer) and a text editor.
Open up /system/usr/keylayout/melfas_touchkey.kl in a text editor.
Make sure that your 'keys' look like this:
key 139 MENU
key 158 BACK
key 217 SEARCH
key 105 HOME
key 106 SEARCH
Keep VIRTUAL as part of the keys and you will still have vibration as well.
Alternatively (Thanks @finneginsfast !) you can flash 'keylayout.zip' attached below from recovery.

Flashables (Updated June 29 2013))
This is reserved for flashables such as modems and kernels.
Ultimate Kernel Cleaner
Before flashing a kernel, you should run a kernel cleaning script. Matt (THANKS @Matt5606) gave me this one - it handles cache cleaning, etc. See the attached file for ultimate kernel cleaning script.
Modems
Lots of modems out there, and get Perka's file store for a ready list (see recommended apps). My favourite for a long while has been the i9000UGKC1 modem - it has GB versions as well as ICS - just make sure you get the right one!
You can also download modems diredctly from Perkas Site (/Samsung/ICS_CM_Modems/850_Modems_CM) or the android app (available in Play). Ensure you get the right modems for your ROM or Android version.
For Gingerbread: /Samsung/I9000/Modem_850_Enabled
For ICS and JellyBean: /Samsung/ICS_CM_Modems/850_Modems_CM
@finneginsfast provided me with this graphical link to help give you an idea of what modems work where: http://soggycashew.weebly.com/modem-location-map.html
Gingerbread Kernels
Semaphore. Great kernel to run with DarkyROM.
http://forum.xda-developers.com/showthread.php?t=1112908
Glitch Kernel. Great kernel to run with CM7 or MIUI GB as its made for our model!!!
http://forum.xda-developers.com/showthread.php?t=1315400
ICS Kernels
I run Semaphore almost exclusively - definitely a favourite.
http://forum.xda-developers.com/showthread.php?t=1468795
Glitch has a specialized kernel for ICS as well, but I typically do not use it.
http://forum.xda-developers.com/showthread.php?t=1459475
JellyBean Kernels
Semaphore has a JellyBean kernel for 4.1.2 as well as 4.2.2 - its my go to kernel.
http://forum.xda-developers.com/showthread.php?t=1786220
Be sure to get the LMK app from XDA (search it) to ensure your launcher and keyboard do not die, and get Semaphore manager from the Play Store as well.

Recommend APPs (Updated 09/28/2012)
Launchers - ICS/JB
- APEX Launcher (free and paid, on Google Play)
- Nova Launcher (free and paid, on Google Play)
- Holo Launcher HD (free and paid, on Google Play)
Launchers - 2.x
- Launcher Pro (free and paid - better widgets with paid - Google Play)
- GO Launcher (totally free - lots of great supporting apps - Google Play)
- ADW (free and paid, Google Play)
- Holo Launcher (free and paid, Google Play)
Keyboards
- Swift Key X (trial and paid, Google Play)
- Swype (trial and paid, Google Play)
File Management & Files
- ES File Explorer (Free, has root explorer - Google Play)
- Perka's File Stash Free and Donate - excellent file resource for modems - Google Play)

Other Stuff
Essential Files
Before we get started wanted to make available some essential files. These are from my public dropbox folder, so I may switch it in time, but felt they should be here.
Need to get back to stock, then here is the Stock Telus Froyo 2.2. http://dl.dropbox.com/u/2069701/T959TLJL3.zip
Want stock with a CWM kernel on 2.2, then here is the VooDoo Kernel http://dl.dropbox.com/u/2069701/voodoo.advanced.v666.2-20110111-21.53.tar
Remember when flashing back to stock to tick the re-partition box, and place the files as follows:
- s1_odin_20100512.pit in "PIT"
- T959TLJL3-REV03-ALL-low-CL763100.tar.md5 in "PDA"
- T959TLJL3_FROYO_Phone-CL763100.tar in "PHONE"
- SGH-T959D-CSC-TLSJL3.tar.md5 in "CSC"
Additionally, Karma has some core files he is posting as well (Thanks @karmatose !!!) and you can find those files at:
http://t959d.karmatose.org
To access the files, you will need a login. @karmatose or myself can make the login and password available to you.
Starting Fresh
Buck provided this a while back. This is recommended after many flashes and you want to start out fresh without lingering script files and other crap we're all guilty of installing/flashing
WARNING: This clears up EVERYTHING - even TB backuped programs - so if you want your TB backups, change your backup location to the REMOVABLE SD Card.
If you want to start fresh and i mean bare bones this is how i do it.
1. Remove the external sd card (the one you put in the phone)
2. Go into storage under settings and unmount then format the sd card (the partition the phone makes that you see if you do not have root)
3. Flash stock rom via odin and repartition ofcourse.
4. When you are done the phone will be like you just took it out of the box.
5. Backup the card you took out and format that. Leave it out.
6. Grab some beers and start flashing whatever you want (except the neighbors they dont like that)

Awesome thread, subscribed!
Sent from my GT-I9000 using XDA

Do I have to root my phone after installing GB . Or I can wait
And witch app is the better to backup the EFS folder

You need to root to back up your EFS... so for that. Then use root explorer or ES to copy that folder over to your SD and computer.
If you ES make sure turn on root explorer and mount /system.
Sent from my GT-I9000 using xda premium

In Odin witch slot (PDA,PHONE,CSC,BOOTLOADER) that i put the file speedmod-kernel-k16-11 . and the other one

Pda
Sent from my GT-I9000 using xda premium

there is no root option in the recovery mode after i put the speedmodkernel
nevermind lolll

I've been lookin at that procedure and you root through recovery with the speed mod kernel? I'm pretty sure you can root while on stock GB without all that hassle by just using SuperOneClick.
Sent from my GT-I9000 using XDA

Thx a lot JP for this thread!!!! . I m now part of the ICS community . Only one thing my IMEI number inst the same was its written under my battery . I copy back the EFS folder tho . Does it change something ???
---------- Post added at 08:38 PM ---------- Previous post was at 08:37 PM ----------
Matt5606 said:
I've been lookin at that procedure and you root through recovery with the speed mod kernel? I'm pretty sure you can root while on stock GB without all that hassle by just using SuperOneClick.
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
I finally found it but thx for the feedback

If you remembered to copy your efs folder before the flash, just copy the original folder back into your phone replacing the old files and reboot. You should have your number back.
Sent from my GT-I9000 using XDA

Yeppers
Sent from my GT-I9000 using xda premium

So get yourself the semaphore kernel and nova launcher and you are all set
Sent from my GT-I9000 using xda premium

it did not change my IMEI numbers?? .what is that kernel do (Semaphore) and how to install it odin??

jpmccarthy said:
Darky ROM tweak
When installing Darky ROM you will find the buttons for home and back no longer work. There is a simple fix for this as long as you have a root explorer (like ES File Explorer) and a text editor.
Open up /system/usr/keylayout/melfas_touchkey.kl in a text editor.
Make sure that your 'keys' look like this:
key 139 MENU
key 158 BACK
key 217 SEARCH
key 105 HOME
key 106 SEARCH
Keep VIRTUAL as part of the keys and you will still have vibration as well.
Click to expand...
Click to collapse
Or you can install this zip from recovery, I think it's the same fix or at least it's what I've been using for a while.

[Guide] Create your own ROM (Beginners Welcome)

Did you Ever Wanted your Own Custom ROM? Did you don't understand other Guides? Do you don't Like ROM Kitchens? Than this Guide is the right Guide for you! Just Try It and you can create your Own Custom ROM!
​​​

General Information​
So, Before we start with this Guide, i just want to tell you some General Informations about [highlight]Custom Roms[/highlight]. When you buy your phone, you will have a [highlight]Stock ROM [/highlight]installed. A [highlight]Stock ROM [/highlight] is just that Software, your Company has created, especially for your phone. It's a Software like Android 2.3.4 with Touchwiz 4 or Android 4.0.4 with Sony UI. Those Softwares may be good, but there are many Things to Improve, for the Best Xperience, while using your Phone. A [highlight]Custom ROM [/highlight]can be complete different to [highlight]Stock ROM [/highlight], like [highlight]Cyanogenmod 10 [/highlight], or be just a improved Version of the [highlight]Stock ROM [/highlight]. To Build a [highlight]Custom ROM [/highlight] you need to know a few Words, and have a Phone with Root Acess + S-OFF / Unlocked Bootloader. So in this Guide we will concentrate on the Easy Way, the [highlight]Improved Stock ROM [/highlight]. You Can also Build a [highlight]ROM [/highlight] out of Source from Google, but thats too complicated for beginners. Setting up compile envirment can be quite complicated . So let's take a look at stuff you need to know:
[highlight]Root Acess[/highlight]
Complete Acess to all System Files, like Administrator on Windows. To Root Your Phone, search XDA. Rooting your Phone is done by putting su library to /system and manage acess with SuperSu or Superuser. When you buy your Phone, it doesn't have Root Acess. Root Acess is needed for installing CWM, mount your /system as Read & Writeable ----> You can delete system files, and installing apps to /system/app, by copying them to /system/app. By Rooting your Phone you loose Warranty, but you can reinstall stock software and no one will notice
[highlight]ClockWorkMod Recovery (CWM)[/highlight]
Recovery Mode of your Phone. In Recovery you can install flashable zips and roms, wipe and format your device, mount different partititons and fix permissions... To Get CWM search XDA. There are different Ways for every Device. You can enter recovery before your device is fully booted, and since touchscreen drivers are not yet available you need to use the volume buttons for controlling the recovery. There are different ways of entering cwm for every device.
[highlight]Rom & Kernel[/highlight]
ROM means: [highlight] Read-Only-Memory[/highlight] . The Funny Thing is that we can Read and Write on our Read-Only-Memory. Anyway, its a partition which includes large parts of the OS ----> operating system of your Phone. In a [highlight]ROM[/highlight] for Android Phones are included apps, framework, libs & many more and since android is modular, there is an app for everything (keyboard, launcher, statusbar). Together with a [highlight]Kernel[/highlight] it's the "Life" of your Phone.
The Kernel is needed for a working Phone. You Can Install Stock or Custom Kernel. When you buy a Phone Stock Kernel is preinstalled of course. The kernel includes many drivers, controlls the cpu and does many more... Just rember that word ​​

General Information
1. Install Stock ROM to your Phone - This Can be Done by Flashing via Flashtool or Odin. You Need a Clean Base to Start. Recomnend is a Stable, Official ROM, like Gingerbread, Ice Cream Sandwich or maybe Jelly Bean.
2. Root the ROM. This Can be done with Different Tools, Very Popular is for Example SuperOneClick Tool.
Just search for "my device name root" in xda if your not sure
3. Improve Stock ROM on Your Phone. So, After You Have Installed the Stock ROM and Rooted the ROM You Can Start. Now You Need To Change Some Things, To Make the Stock ROM to a Customized ROM. You Can do a lot Things, Here are a Few Examples:
- Install Latest Superuser SuperUser
- Install Latest BusyBox Auto-Installer
- Supercharge the ROM, enable Zipalign etc.. ----> here
- Remove Bloatware. Use Es File Explorer to remove not longer needed apps in system/app partitition
- Tweak Build.prop by going with ES File Explorer to /system and editing your build.prop. now you can change the Name shown in Settings and do a lot more ----> http://forum.xda-developers.com/showthread.php?t=1227269
- Change the Bootanimation. You can find a lot of them by Going to themes and apps of your own device.
- Add or Change Apps. Check out Themes and Apps Selection of Your Device and Install a few Of Them, If You Are Allowed to use MooDeD Apps created by other Users
3.1 Now Delete/remove all backups in clockworkmod/backup folder
4. Now Make Sure You Have Installed CWM. If You Have Changed a Lot Things and You Think Your ROM is good enough, Boot to CWM, select wipe data/factory reset and Boot up again. If You Are Still able to Boot, Check the ROM for Bugs or Problems. Write them Down. Try to fix them. You can always take a logcat (adb logcat)
Than Boot again to CWM select wipe data / Factory reset ---> yes advanced ---> wipe battery stats ---> yes. Now Select backup & Restore ---> Backup.
5. Connect Your sd card to PC and go to Clockworkmod/backup folder. Now Go to the only 1 backup folder and copy "system.img" to your PC.
6. On PC Open Yaffey and Choose Open ---> system.img and than extract to empty folder called system.
7. Now You Will Get a Folder "system" which contains the System of your Phone. Now Create an Empty .zip file and paste in extracted Meta-inf folder Download and copy folder "system" inside. ROM should be flashable for NOW!
Remeber to mount /system before flashing // replace with mount Script for ur device... You can check this by dowoading any rom 4 ur device
NOTE: This has nothing to do with developmemt or original development in any way. Its theming a stock ROM in the simplest way...
Just Press thanks if this was helpfull in any way...

How to
[[ Placeholder ]]

[[ Placeholder ]]

[!][RESERVED][!]
[[ Placeholder ]]

1 year later:laugh:

Sorry... I will finish this guide later...

And so on...
Sent from my GT-S7500 using xda premium

To infinity and beyond!

saiz136 said:
To infinity and beyond!
Click to expand...
Click to collapse
Beyond Smart xD

Updated Thread and Added a First Guide

so where is the guide ? lol ...
maybe make the guide before in PC and the create the thread ? .. just sayin

ruizit0 said:
so where is the guide ? lol ...
maybe make the guide before in PC and the create the thread ? .. just sayin
Click to expand...
Click to collapse
There is a guide lol

jader13254 said:
There is a guide lol
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
ahaha sorry .. i was thinking that was a little intro explaining clocklowrk and stuff .. to a coocking tutorial ahaha
maybe you can expecify more in title or something
nice tutorial to create a rom this way .. i read somewhere that the next clockwork will have this feature

Will try..
Sent from my GT-N8000 using Tapatalk 2

kaipro said:
Will try..
Sent from my GT-N8000 using Tapatalk 2
Click to expand...
Click to collapse
You need different commands for wiping on g Note, just search your device forum
Sent from my LT18i using xda app-developers app

Where is the system.img? I didnt have one when i backed up with cwm

very noob-friendly !

CovXX said:
Where is the system.img? I didnt have one when i backed up with cwm
Click to expand...
Click to collapse
check clockworkmod/backup folder... there should be system.xxxx.img

[TUT] Probably the simplest way to load a custom (CyanogenMod) ROM on your Hero!

Hi all.
I had an Orange UK Hero GSM on the latests official stock ROM and looked everywhere for a simple way to get Cyanogen 7 on it...
Most the 'simple' ways I found involved typing in text in a command line window and the ones I tried (including the official CyanogenMod instructions) did not work...
With a lot of looking around I've found a simple way that involves no typing and only downloading 3 files! So here goes... but before I do, remember I am not responsible for any damage you cause to your device. I am sharing the method that worked for me...
1) Put the attached apk files and the CyanogenMod 7 zip in the root directory of your SD card in the phone. The CyanogenMod zip can be got from: here.
2) Install the Universal Androot apk
3) Run the app to root your device (using SU option 2.1-2.2)
3) Install the RomManager 4.3 apk
4) Run the app. Choose install Clockwork Mod Recovery to install the recovery
5) Choose install ROM and when the phone boots into CWM Recovery select to install your CM7 zip from your SD card.
6) Reboot and you've got CM7.2 on your Hero!
Let me know if this works for you and hit the thanks button if it does! This guide would have saved me a day of trial and googling if someone else had written it first! :cyclops:
Thanks to the makers of Universal Androot and Rom Manager... it's their work that made this job so simple!

Thank you!!
Thank you for sharing the almost extinguished Rom Manager 4.3.apk
I've been looking for it for almost 3 days.
Thank you!!
Chris
afr33s said:
Hi all.
I had an Orange UK Hero GSM on the latests official stock ROM and looked everywhere for a simple way to get Cyanogen 7 on it...
Most the 'simple' ways I found involved typing in text in a command line window and the ones I tried (including the official CyanogenMod instructions) did not work...
With a lot of looking around I've found a simple way that involves no typing and only downloading 3 files! So here goes... but before I do, remember I am not responsible for any damage you cause to your device. I am sharing the method that worked for me...
1) Put the attached apk files and the CyanogenMod 7 zip in the root directory of your SD card in the phone. The CyanogenMod zip can be got from: here.
2) Install the Universal Androot apk
3) Run the app to root your device (using SU option 2.1-2.2)
3) Install the RomManager 4.3 apk
4) Run the app. Choose install Clockwork Mod Recovery to install the recovery
5) Choose install ROM and when the phone boots into CWM Recovery select to install your CM7 zip from your SD card.
6) Reboot and you've got CM7.2 on your Hero!
Let me know if this works for you and hit the thanks button if it does! This guide would have saved me a day of trial and googling if someone else had written it first! :cyclops:
Thanks to the makers of Universal Androot and Rom Manager... it's their work that made this job so simple!
Click to expand...
Click to collapse

great great , good post