Hi, i wanna dualboot my phone with aurora (on the phone memory) and miui or CM7 (on the sdcard)
Can somebody help me?
jaronstrypsteen said:
Hi, i wanna dualboot my phone with aurora (on the phone memory) and miui or CM7 (on the sdcard)
Can somebody help me?
Click to expand...
Click to collapse
You can't. CM7 .32 kernel is the only system installable as second system. That requires you to use .32 roms. Also, both roms are in phone memory in dualboot.
See geno post I try it before I worked fine on. 32 but I don't know about. 35
Ask to geno maybe he will help you
Now geno move on pro so maybe he wouldn't help u
Sent from my U8800 using XDA
Related
I’m Using MIUI Now，and i want to flash cm9 on my defy，but I do not know how to do that. Anyone can help me? I have flashed cm7, is it the same with cm9?
this might help
http://forum.xda-developers.com/showthread.php?t=1364659
you should just use multi-Boot Keep your curent room and CM9
crlx1906 said:
http://forum.xda-developers.com/showthread.php?t=1364659
you should just use multi-Boot Keep your curent room and CM9
Click to expand...
Click to collapse
I have done as that, but now the problem is cm9 has no signal in this way
I'm have not tried to flash cm9 coming from miui.
I just did the usual way, wipe everything and then instal .zip from SD.
If you want to instal builds, newer than 111207 you need to flash 111207 first.
hope this helped, greetz Esok
edit: I also had problems with the net while using multiboot.
Newer builds 111207 cant be used with multiboot. But in my opinion 111211 is good enough to use everyday
I've really searched everywhere but it's too complicated and i can't seem to find a solution.
So, my issue is that i have installed the ICS CM9 with GB kernel, but i want to install the WIUI 2.4.20 Stable (GB) version that is based on MiuiAndroid 2.3.7 (GB).
I am assuming it requires the Froyo kernel, and if so, i need to somehow downgrade it to froyo before installing it, but i don't know hot to do it...
can anyone please help me?
Also the kernel version of my rom is "2.6.32.9-g21f1a48"
Questions go in the Q&A section
daaamn_ said:
I've really searched everywhere but it's too complicated and i can't seem to find a solution.
So, my issue is that i have installed the ICS CM9 with GB kernel, but i want to install the WIUI 2.4.20 Stable (GB) version that is based on MiuiAndroid 2.3.7 (GB).
I am assuming it requires the Froyo kernel, and if so, i need to somehow downgrade it to froyo before installing it, but i don't know hot to do it...
can anyone please help me?
Click to expand...
Click to collapse
as far as i remember 32 is froyos kernel..(35 is gb's kernel)
so what is the problem???
Numbers are the same I thought. If you flashedthe gingerbread kernel from the recovery, just search for the froyo kernel zip (there is one on epsy's site) and flash it with the froyo based ROM.
Don't forget to wipe.
Sent from my MB525 using XDA
labsin said:
Numbers are the same I thought. If you flashedthe gingerbread kernel from the recovery, just search for the froyo kernel zip (there is one on epsy's site) and flash it with the froyo based ROM.
Don't forget to wipe.
Sent from my MB525 using XDA
Click to expand...
Click to collapse
Hello, I read on a lots of topic that say we have to pass on nandroid and other thing for downgrade.. so i want to be sure that i can downgrade my gb kernel to froyo kernel juste like this..
When i read that, that or that for me it is impossible directly...
Thank you.
-------------------------------------------------------------------------------------
My English is horrible... Sorry
:Hey guys,
I'm in trouble with multiboot and tried some ways but failed. So I need your help!
My main system is MS2 2.3.4, BL6, GB kernel. And I want CM9 defyplus to be the 2nd system.
First I tried m11kkaa's multiboot v0.7 but couldn't launch CM9, it stunned with black screen. Then I found multiboot can't work on GB kernel after that. So I searched solution and found this View attachment multiboot_v0.5.5_fix.zip，it came from http://bbs.mfunz.com/forum.php?mod=viewthread&tid=408756, and could work on GB kernel. With this i could launch CM9 finally, but it came out another question, the encryption unsuccessful and couldn't go on.
After reading the changelog of m11kkaa's multiboot I thought maybe the v0.6.1 can work properly. So I tried to contact with the guy who did modification on it for help but failed.
I think the attachment maybe useful to m11kkaa for developing multiboot on gb kernel, but i cant reply his thread for i'm new.
Can someone help for letting m11kkaa know here maybe have the solution of multiboot with gb? I'm very thankful!
My defy plus is bl7.. So stock gb kernel.. And multiboot worked fine.. Just don't flash any kernel.. I didn't have any problem..
Sent from my MB526 using xda premium
dk0108 said:
My defy plus is bl7.. So stock gb kernel.. And multiboot worked fine.. Just don't flash any kernel.. I didn't have any problem..
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Actually i got touch with the guy from mfunz.com finally, and with his help i got a fixed v0.6.1, then i made it.
The only thing which different from my 1st try is when stunned as black screen i kept waiting, for about 3 or 5 Minutes the screen turned on at last. Then i got into desktop without encryption unsuccessful.
So maybe i should wait longer at the first try? maybe the fixed version is unnecessary?
Anyway, thanks for your reply. let me know the multiboot can work with gb kernel at least.
But i swear i saw m11kkaa'reply in his thread saying that it's not support for gb kernel.
And, what's mean of 'Greenbreadmod' in the changelog?
I used v0.6.1.. Not the fixed one.. I didn't have any problems.. Tried cm7 ms2ginger and cm9 on multiboot and all worked fine.. what image files are you using?? did you flash a kernel while installing ms2ginger??
Sent from my MB526 using xda premium
Hello, so I am new user of Huawei U8800 and I succeded to install Aurora ICS on it, but now I would like to try CM7. But I don't know how to get back to Froyo and then from Froyo to CM7 (as it says in CM7 install instructions?
Thanks for help.
Just format system and data and install over it.
Sent from my Desire HD using xda premium
SEK610i said:
Hello, so I am new user of Huawei U8800 and I succeded to install Aurora ICS on it, but now I would like to try CM7. But I don't know how to get back to Froyo and then from Froyo to CM7 (as it says in CM7 install instructions?
Thanks for help.
Click to expand...
Click to collapse
If you want to install CM7 (.32) you need to downgrade to froyo but if you want (.35) you can install it over Aurora.
Sorry but can I ask why to revert back to froyo from Aurora?
Somcom3X said:
Just format system and data and install over it.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
That would not work.
Find official froyo
Unzip it and put into your sdcard like /dload/update.app
Close your phone.
Press vol+ vol- and power and keep until update screen.
After the successful froyo downgrade root it.
Copy cwm
Install cm7.
That simple.
Sent from my U8800
entrapmen said:
That would not work.
Find official froyo
Unzip it and put into your sdcard like /dload/update.app
Close your phone.
Press vol+ vol- and power and keep until update screen.
After the successful froyo downgrade root it.
Copy cwm
Install cm7.
That simple.
Sent from my U8800
Click to expand...
Click to collapse
This only need for Cm7.32
If you want to CM7.35, just install on top aurora with full wipe
Mahdial said:
If you want to install CM7 (.32) you need to downgrade to froyo but if you want (.35) you can install it over Aurora.
Sorry but can I ask why to revert back to froyo from Aurora?
Click to expand...
Click to collapse
I won't downgrade to Froyo, I just wan't to try CM7, and in CM7 install instructions downgrading to Froyo is mentioned, so I tought I will have to downgrade to Froyo and then install Cm7.
Thanks for all answers, will try installing CM7 35 right now.
EDIT:Can someone link me to CM7 .35 thread?
Sent from my U8800 using Tapatalk 2
There are atleast three dev topics in the forum. One from genokolar and if i am not wrong there is a kernel dev for ezet's cm7.2 .32 by Paul*.
But... All of them are onhold or ended dev. And they all have bugs. So. What i am trying to say is if you want bug free cm7 then you should try ezet's .32
Sent from my U8800
entrapmen said:
There are atleast three dev topics in the forum. One from genokolar and if i am not wrong there is a kernel dev for ezet's cm7.2 .32 by Paul*.
But... All of them are onhold or ended dev. And they all have bugs. So. What i am trying to say is if you want bug free cm7 then you should try ezet's .32
Sent from my U8800
Click to expand...
Click to collapse
Installed .32 yesterday, and I am really happy with it. Thanks everone for helping me. :good:
SEK610i said:
Installed .32 yesterday, and I am really happy with it. Thanks everone for helping me. :good:
Click to expand...
Click to collapse
What's the main differences between Aurora and CM7.2 in your opinion?
Cause I want to go to Aurora though.
Mahdial said:
What's the main differences between Aurora and CM7.2 in your opinion?
Cause I want to go to Aurora though.
Click to expand...
Click to collapse
Sorry, for late answer...I didn't see any major differences...actualy I was more pleased with aurora, but I always got atleast 2 reboots a day on Aurora, so thah is the reason I tried CM7.
Now I have one more question...How do I get to stock GB now? I changed recovery.img when I was installing CM7, so do I need to change recovery.img to stock, and then "update" with official GB, or can I just directly "update" to official GB without changing recovery.img to stock before?
Thanks for your help
SEK610i said:
Sorry, for late answer...I didn't see any major differences...actualy I was more pleased with aurora, but I always got atleast 2 reboots a day on Aurora, so thah is the reason I tried CM7.
Now I have one more question...How do I get to stock GB now? I changed recovery.img when I was installing CM7, so do I need to change recovery.img to stock, and then "update" with official GB, or can I just directly "update" to official GB without changing recovery.img to stock before?
Thanks for your help
Click to expand...
Click to collapse
Update with dload folder of the GB, it will give you the stock recovery after completed the update.
Sent from my U8800 using xda app-developers app
hi,
i want to ask who is the more stable roms for Ideos X5? (not the pro)
i want a stable and fast rom, and if it is possible not take all the battery.
for fast rom it is better to stay in android 2.3? or i can have and good results with 4.x?
the 4.x roms need more memory from the 2.3?
Thanks for any answer
You have here all you want, please take some time and read, all depend what do you want from your mobile, if you want play, or any navigate
http://forum.xda-developers.com/showthread.php?t=2166353
Using Tapatalk 2
Based on each version of Android:
Gingerbread - CM 7 ezet's rom
Ice Cream Sandwich- Aurora dzo's or AuroraSP (tweaked of Aurora)
Jelly Bean - CM 10 blefish's rom
My 2 cents
pl4t!n said:
You have here all you want, please take some time and read, all depend what do you want from your mobile, if you want play, or any navigate
http://forum.xda-developers.com/showthread.php?t=2166353
Using Tapatalk 2
Click to expand...
Click to collapse
thanks
in the past i have try this:
CyanogenMod 7.2 for Ideos X5 (u8800) by exet
http://forum.xda-developers.com/showthread.php?t=1527745
and it is working but i want to try and newer roms.
So today i have try the AuroraSP.
I have recovery 5.0.2.8 (and i have try with 5.0.2.7)
I have make full wipe (data, cache, dalvik)
I have install AuroraSP V4R
but then in the boot screen i have see only the huawei logo. The rom not start.
I have do something wrong?
there is a problem to switch from ezet CM72 to auroraSP?
i have try to go and to Aurora ICS 4.0.4 v5 but the problem remain.
thanks
dark_vader said:
Based on each version of Android:
Gingerbread - CM 7 ezet's rom
Ice Cream Sandwich- Aurora dzo's or AuroraSP (tweaked of Aurora)
Jelly Bean - CM 10 blefish's rom
My 2 cents
Click to expand...
Click to collapse
hi
thanks for this, i have use ezet's CM 7.2 and it is good.
I have see that you have use AuroraSP (in your signature).
How about speed and battery about ezetCM7 and AuroraSP? it is similar or not?
Also you have any idea what is wrong in my previous post?
thanks a lot
Hello, first of all you should install official 2.3 gingerbread from Huawei and root it. After that you should be able to install aurora without problem.
There is a thread on the developer section on how to install and root official Rom.
Sent from my U8800 using xda app-developers app
blueicegr said:
hi
thanks for this, i have use ezet's CM 7.2 and it is good.
I have see that you have use AuroraSP (in your signature).
How about speed and battery about ezetCM7 and AuroraSP? it is similar or not?
Also you have any idea what is wrong in my previous post?
thanks a lot
Click to expand...
Click to collapse
Speed is better on Aurora that's for sure and about battery i don't remember well i don't have CM7 and haven't tried anymore more than 1 year but drains a little more if you use 2G and turn off Wifi and then you can save battery.
If must have GB on your phone after that you should install any other custom roms since from CM7 to CM 10 and of course Aurora too. Remember when update from different kernel please format system, data and cache with together all 3 wipes.
dark_vader said:
Speed is better on Aurora that's for sure and about battery i don't remember well i don't have CM7 and haven't tried anymore more than 1 year but drains a little more if you use 2G and turn off Wifi and then you can save battery.
If must have GB on your phone after that you should install any other custom roms since from CM7 to CM 10 and of course Aurora too. Remember when update from different kernel please format system, data and cache with together all 3 wipes.
Click to expand...
Click to collapse
thanks for the answer.
What version of recovery you have use?
i have try 5.0.2.7 and 5.0.2.8 and 5.5.0.4 but not luck.
it is working when i install CM72 but not in aurora.
i have wipe system data cache but still not luck. In the boot i have just see the huawei logo.
any idea?
If you have ezet's Rom then you are at .32 kernel and need to install official Rom first. Just read my previous post. If not then sorry..
Sent from my U8800 using xda app-developers app
gegkikas said:
If you have ezet's Rom then you are at .32 kernel and need to install official Rom first. Just read my previous post. If not then sorry..
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
oh, yea, i have do this and everything is ok now
thanks
Nice
Sent from my U8800 using xda app-developers app