Related
I decided to go ahead with the TW firmware upgrade. Everything seemed to be going fine until I tried to install it and it told me there was an error and I needed to hook it up to Kies first. I had already been using Kies with it on my Macbook for a couple weeks now so I went ahead and plugged it in. Kies recognized it as usual and all the information came up.
So I went on and tried to install again and it said it needed to reboot.
It reboots and comes to the Samsung Galaxy Tab 10.1 screen like normal (right before it starts the galaxy animation). Next thing I know it comes to a screen that looks like the attached images! I immediately unplugged it from Kies and shut it down. Every time I start it back up it does the same thing. I honestly have NO idea what to do. I can't even return it as it's past the 14 day period and I (stupidly) didn't buy Staples' bogus $160 insurance.
I was not rooted before. This was a stock tab that I bought at staples. It had the firmware 4.24 when I bought it, I think.
Please, any help is appreciated. I tried doing firmware recovery in Kies but the pop up comes up in Korean and I have no idea what it says...
Edit: More info. I'm not the only one with this problem. Two other people have posted on AndroidPolice about this. http://www.androidpolice.com/2011/08/04/samsung-galaxy-tab-10-1-wifi-touchwiz-ux-update-is-now-live/
The software is definitely running underneath all that mess but it's literally impossible to see what is going or to touch anything.
I guess this thread is about the same issue
http://forum.xda-developers.com/showthread.php?t=1203610
Thanks, I'm checking the thread out now. I probably should have searched more than just Google before posting but I freaked out when it happened.
No need to freak out . we have xda and dev to solve all our problems
i have exactly the same problem as you... what should i do now?
I get the same screen but after rebooting! pfft it's making me really sad :\
I'm sorry but I tried reading this http://forum.xda-developers.com/showthread.php?t=1171089 and couldnt understanding what should I do!
What CWM + my device is not rooted, all I could understand is that the thread contains instructions on how to root your device..
I just want my normal screen back!
Please tell me what to do in simple english :\
And now I did a wipe and the stripes are gone, but the screen is black instead :\ still not working. Please help me!
Are you sure you didnt sit on it?
Amal Kadi said:
I'm sorry but I tried reading this http://forum.xda-developers.com/showthread.php?t=1171089 and couldnt understanding what should I do!
What CWM + my device is not rooted, all I could understand is that the thread contains instructions on how to root your device..
I just want my normal screen back!
Please tell me what to do in simple english :\
Click to expand...
Click to collapse
haha i had the same problem go look at my threat that was posted above. in thier someone posted instructions on what to do the link you posted contains the download to the things needed heres a basic rundown of what you need to do
install clockwork recovery mod "CWM" to replace your bootloader.
download and install stock 3.1 and you should have your tab back to normal.
my help thread has the instructions to instal CWM
tonyurquiza said:
haha i had the same problem go look at my threat that was posted above. in thier someone posted instructions on what to do the link you posted contains the download to the things needed heres a basic rundown of what you need to do
install clockwork recovery mod "CWM" to replace your bootloader.
download and install stock 3.1 and you should have your tab back to normal.
my help thread has the instructions to instal CWM
Click to expand...
Click to collapse
So I need to follow all the steps for rooting except the last one which is the actual rooting? Great thanx! Do I need to use Kies? My current computer is Mac but I guess I need to download those things to a Windows machine to make it work, right?
Thank you very much
I had the same problem. I upgraded the update on my non-rooted tablet and got the funked up video mess. Per instructions from Samsung support, I hard booted to the recovery menu (power+vol down, then power up, down on download screen) and did the factory wipe. After that I ended up with the black screen. I could tell things were working in the back but couldnt see a thing. I figured I would throw it on the Kies and it saw that there was a factory upgrade so I let the Kies run through it and it works fine now.
Dont know if this will help w/other but it worked for me.
isimobile along with pershoot has found a faster and better way of fixing this!:good:
I suggest you use isimobile's method found " HERE !!" Don't forget to thank him!!! or we'll fallow you home and poop in your driveway!
If for some reason that does not work try my method!
Sorry Mods I wasn't sure which forum I should put this in please move if incorrect!
A little history before I continue!
I recently decided to Root my TELUS GT-P7510/16GB/WIFI so I went to the Galaxy Tab 10.1 Android Development Forum and fallowed S0ckM0nk3y's [ACSyndicate] [How-To] Root/Unroot The SGT 10.1 GT-P7510 USA Retail WiFi Only
.
Everything was going fine until I was to put it into Recovery Mode (At this point Its CWM-based Recovery v5.0.2.7) to Flash Samsung_Galaxy_Tab_10.1_root.zip, but as soon as it booted into Recovery the screen was scrolling as shown here http://www.youtube.com/watch?v=GhGm6kq_4dg&feature=player_embedded by castiel19.
There is nothing you can do to correct this except fallow my Guide (OR) download and install the only CWM Recovery that works for us with this problem which is ClockworkMod_Recovery_v5.5.0.4_P75xx.tar
... I have tried all of them and this is the only one that works....For me anyways!
I was not satisfied with this as I Purchased ROM Manager and it shows that the latest update for my device is V4.0.0.4, so I decided to try all I could to find a solution and I did.... By accident!
Before You continue, Please back up all your personal stuff to your PC or any other media but do not leave anything you can not loose on the TAB it will be gone if you continue!
Meat, Potatoes and Gravy!
Follow S0ckM0nk3y's Guide HERE you want to follow the Unroot part!
Click on the very first Blue DOWNLOAD link in his guide which will open another forum with a similar layout and click the first Blue DOWNLOAD link at the top of that guide save it to your desktop. The file is called sgt10.1_root_unroot.zip and it is 381MB. Once downloaded, extract to a new folder on your desktop, now open that new folder on your desktop and extract the ODIN3_v1.85.zip!
Put your Tab 10.1 into Download Mode by using S0ckM0nk3y's guide.
Open Odin3_v1.85.exe that is in the folder that you extracted the two downloads too on the desktop.
Click the PDA button and choose P7510XABKMP_P7510UEKMP_HOME.tar.md5.
Plug the USB into your PC
Plug the other end into the Tab
In the Odin Software on your PC the box below ID:COM should be yellow with stuff in it click the start button it will take a few minutes. 1min 59sec for me. once finished the Tab will reboot and do some stuff then it will reboot again to the OS.
Your Unrooted with an to up to date stock ROM!
This is optional but recommended! Power off your device now, and then put it in Recovery Mode.
Once Android System Recovery comes up click "wipe data/factory reset" then click "wipe cache partition" then click "reboot system".
Now Root using HERE and install any of the appropriate CWM Recovery versions without having the rolling screens!
I will clean this up later it is 2am and I have to Tow a car 800km tomorrow! There are fellow members that need this so it was rushed sorry!
I would like feedback on this as to wether it works or not for you!
I had my wife follow this guide with her Tab that was doing the same thing and it worked for her first time, but i'm more worried that my wording might not be understood by some and if that is the case it may not work for you and i would like to help you understand!
Update: 1
I can not confirm this but thanks to "isimobile and vladin79" it also works on 3g P7500 version!
Update: 2
P7510XABKMP_P7510UEKMP_HOME.tar.md5 is now included in S0ckM0nk3y's Package! Upated this guide to reflect that change.
Update: 3
After you fallow this Guide and all goes well but then you notice that when your screen goes to sleep then you wake it up and it is scrambled in the center of the screen and the only way you can stop it is to reboot, follow this Guide! http://forum.xda-developers.com/showthread.php?t=1680738
Major Update: 4 Major Thanks To "isimobile"
Please Read his post Here I am going to test it and will post back!
Don't forget to hit the Thanks button over there! -------------------------------->
Hi
I have same behaviour with the recovery, i fond the overcome recovery who works fine.
But if i install a rom i get same behaviour as recovery during boot. The only way to get endless scroll off is to lock and unlock the screen
Does your process remove endless scroll off curtom rom too?
Yes you should be able to install any CWM without the screen rolling, I'm thinking that there is something about the stock software that came on our particular Tabs that is trying to stop us from replacing Stock Recovery!
I flashed every CWM version mentioned in the Tab 10.1 WIFI forum and the only one that did not roll in Recovery was v5.5.0.4 and if I flash another CWM with the working one installed I would boot up to a rolling CWM Recovery until I reflash the v5.5.0.4.
This is the stock info that was causing CWM to screen roll!
SKU: GTP7510UWR
SW-VER: VLKL2
Kernel Version: [email protected] #1
Build Number: HTJ85B.VLKL2 P7510VLKL2
great write up. thanks!
Did anyone tests this method ?
I don't have enought time during this week, but I'll try this week end.
I'm interessed to know if you succeed to install roms (and not recovery) without flickering.
Thanks
Omg, u rocks
I will test this method this evening (since the time I was looking for)... I hope it works !!
In facts, I think this issue is due to the version of stock (EUKL1 when I bought my GT... then passed to KL2 but same issue).
But, with Task ROM #14 and stock Kernel KMP I have no problem. Once I install Pershoot's Kernel, I have the rolling boot screen (same as CWM) => Turn off / turn on the Unlock screen and is ok.
Have you tried to install Pershoot's Kernel after your handling ?
Azertouf said:
I'm interessed to know if you succeed to install roms (and not recovery) without flickering.
Thanks
Click to expand...
Click to collapse
Not yet! I am not quite interested in trying any Cooked Roms as of yet due to cameras not working.
But I am willing to try Tasks 15 when it becomes available!
Neums said:
Omg, u rocks
I will test this method this evening (since the time I was looking for)... I hope it works !!
In facts, I think this issue is due to the version of stock (EUKL1 when I bought my GT... then passed to KL2 but same issue).
But, with Task ROM #14 and stock Kernel KMP I have no problem. Once I install Pershoot's Kernel, I have the rolling boot screen (same as CWM) => Turn off / turn on the Unlock screen and is ok.
Have you tried to install Pershoot's Kernel after your handling ?
Click to expand...
Click to collapse
I currently am trying the CWM Recovery from pershoot's thread HERE Works a treat! Thanks Pershoot " not sure if it's CWM but Superuser cannot see a network connection to get updated Binaries it just says fail, going to Unroot and start over and see if it is something I missed!<------NEVER MIND THIS! "
Edit
It seems Gmail doesn't like something either, I click on it and it opens and closes repeatedly about 15 times can’t see my Gmail! Time to wipe!<------NEVER MIND THIS!
Hey, dude, it works perfectly !
I can install Pershoot's CWM, Pershoot's Kernel and all others ICS Roms without any freacking rolling screen !!
---------- Post added at 08:08 PM ---------- Previous post was at 08:07 PM ----------
Azertouf said:
Did anyone tests this method ?
I don't have enought time during this week, but I'll try this week end.
I'm interessed to know if you succeed to install roms (and not recovery) without flickering.
Thanks
Click to expand...
Click to collapse
Try to install AOKP Build 28, it works perfectly !
Perfect, that works !!
I'm now on CWM 5.0.2.7 and AOKP Build 28 and no more screen flickering.
PERFECTS, thank's a lot !
Brilliant!
It works me too! Thanks a lot!
This post also very much helped me... so thanks again good sir!
You mentioned you got yours from Telus, I got my 32GB WIFI version from Futureshop, so maybe it's a Canadian version thing?
rAy
PS: I was also very disappointed to find that it has a white back when all of the googled pics of it had a black one... and the fact that it is white is not shown on the Futureshop website, nor shown or written anywhere on the box is baffling! It was almost a deal-breaker as I do NOT endorse white gadgets, but I'll give it a chance first haha.
It works.. Perfect. Thank you so much
I have P7500 model, which is 3G version. I decided to root it and installed several CWM recoveries, but all of them caused a scrolling screen when booted in recovery. Then I came to your guide and installed the ClockworkMod_Recovery_v5.5.0.4_P75xx.tar from your first post. It worked like a charm and the screen was steady as a rock. No more scrolling. Then I used it and rooted my tab.
Thank you so much for your efforts!
vladin79 said:
I have P7500 model, which is 3G version. I decided to root it and installed several CWM recoveries, but all of them caused a scrolling screen when booted in recovery. Then I came to your guide and installed the ClockworkMod_Recovery_v5.5.0.4_P75xx.tar from your first post. It worked like a charm and the screen was steady as a rock. No more scrolling. Then I used it and rooted my tab.
Thank you so much for your efforts!
Click to expand...
Click to collapse
I can confirm, also did it on a 3g(P7500) version, it worked. Thanks!
[Edit1] If you flash ICS, screen also scrolls.
[Edit2] Flashed the 7510 ROM mentioned in first post on the 7500. It worked. So I could flash then latest recovery from Pershoot. Flashed ICS, no Scrolling in ROM.
OP maybe you can edit first post to say it also works on the 7500?
Wow!!!! It DOES work!!!! After days of researching.
I bumped to your thread before but it wasn't make sense, why the hell should the stock ROM interfere with the process lol?
But it makes sense now, like S-OFF concept on the phone, NA stock is "s-off" while my stock (NZ) is not!
Thanks again man! CM9 + latest pershoot kernel now, all smooth no flickering
i've used your guide, thanks it works...the only problem i get now, is screen on/off (screen doesn't switch on after a screen lock or sleep..i can hear email notifications when i send it a mail)
this happens only after i flash Task 14..doesnt happen on the stock ROM for unrooting
so, i used your guide but instead, used Asian firmware to flash stock rom..however CWM screen flicker is back, and the only way for me to flash Task is to use Overcome CWM
I will maybe try your method again and flash ICS (just to test since i really need the camera)
I'm now really thinking there is something in the Asian Tabs that is doing this...
marjoejoejoe said:
i've used your guide, thanks it works...the only problem i get now, is screen on/off (screen doesn't switch on after a screen lock or sleep..i can hear email notifications when i send it a mail)
this happens only after i flash Task 14..doesnt happen on the stock ROM for unrooting
so, i used your guide but instead, used Asian firmware to flash stock rom..however CWM screen flicker is back, and the only way for me to flash Task is to use Overcome CWM
I will maybe try your method again and flash ICS (just to test since i really need the camera)
I'm now really thinking there is something in the Asian Tabs that is doing this...
Click to expand...
Click to collapse
Just the Asian stock, it might have other settings which prevents custom kernels and CWM from being fully functional. I have an Asian Tab but stocked it with American How you say, ummm Asian skin American flesh lol
awesome guide!
hylde said:
Just the Asian stock, it might have other settings which prevents custom kernels and CWM from being fully functional. I have an Asian Tab but stocked it with American How you say, ummm Asian skin American flesh lol
Click to expand...
Click to collapse
finally another one with an asian tab..
did you get the screen off/on problem after flashing task 14?
i want to try out ICS since this method (Stocking with US firmware) removes screen rolling of CWM and successfully applies the necessary CWM for pershoots ICS...have you already flashed ICS in yours?
but then, its May and official ICS might be rolling out soon (i hope)
** which US firmware did you flash? im lookin to try that out
Hi everyone.
Just repeating again - the model I have is A501 on stock 3.2.1 Honeycomb - a more USEFUL tablet with 3G and WIFI capabilities...One would think it would be a much more popular model, but the A501 doesn't have its own board on XDA; its merged with this board for the less practical A500. Basically, I have created this thread as I don't want to take any 'extra' risks in successfully installing ROOT with the CORRECT ROM with the most updated version of Android available for this tab, for example Jellybean...
Another A501 user, beny9 posted:
http://forum.xda-developers.com/showthread.php?t=1745550
Following TimmyDean's method (thank you) I have now managed to install 3.2 Honeycomb A500 ROM with success after completing steps 1-15 inclusive from his README file. As you will know, I don't have 3G or GPS functionality, so I need a stock A501 ROM to install.
I have found:
http://forum.xda-developers.com/showthread.php?t=1113878
Is my best bet to install Acer_A501_1.309.02_4.031.24_COM_GEN1 : http://cdn.a1.futuredial.com/Acer_A5...2_35b68c5d.zip from that above link, which will keep me on HC 3.2 but now, it will be the ROM for the A501? As it seems the only other NEWER Acer updates for ICS are A500 only...
Can someone link me the a fully detailed video or post on here on installing the ROM i mentioned above (if that's the best one to go with, given what I'm on now; A500 3.2 and still keeping root), or to install some other A501 ROM which is for at least Jellybean or ICS?
http://forum.xda-developers.com/showthread.php?t=1828876
Per this link, shoukd i just use the update.zip (for the 3.2 HC A501 ROM) put it on the SD card then boot up holding POWER + VOL DOWN until the file auto-installs?
http://forum.xda-developers.com/showthread.php?t=1099673
Before I can try the above, I also have trouble after i download the ROM's zip file when I try to unzip. I have downloaded the Acer Update Decrypter, but AVG antiVirus will not allow me to run the EVE file even as an administrator. What should i do?
Thanks
RoOSTA
Your best bet is to install a good 501 HC 3.2 and get on HC for your 501.
The files are available. What you'll probably want is a full HC Update rom for the 501. Note that some of these Acer roms are encrypted, so you'll need to decrypt it first. You can find the decrypting tool in the Themes and Apps forum, as a "Sticky". After decrypting, you can pull the update.zip out of it, and copy to Ext SD (do not extract, just pull the update file out). Boot the tab holding Vol- and PWR I believe. Might be Vol+ but I can't remember. This should force the tab to look for update.zip on your SD and install it.
I would use this one;
Acer_A501_1.309.02_4.031.24_COM_GEN1
After it installs, and you get it set up, you need to get Acer Update Enhancer from the Play Store. This will allow your tab to get the ICS OTA.
Keep in mind, there is only 1 official ICS OTA update for the 501, so don't expect more. It may do it in 2 steps though.
If you want root on ICS, there is really only 1 way to get true root and adb system remounts. And that's to flash the V8 unlocked ICS Bootloader, and flash an insecure boot.image. There's currently a small package that'll give you somewhat root, but it's a pain and really doesn't do a good job. So it's better to get the V8 and unsecure boot image. Might be a good idea to also install CWM Recovery at the same time.
Get the correct rom installed first, then check back if you need help.
Oh yeah, one more thing. When you are on HC 3.2, get your UID number and write it down somewhere. You need this as a safety precaution. There's a good sticky thread on how to do it. Pretty simple really.
MD
Ugh. I have a pain in the A$$ version of AVG...even under advanced settings there was no disable options. Managed to figure it out to run the Acer Decrypter EXE and fix the image you have advised I should download and flash. Will give that a go now...
Thanks again!
Just to fill you in, this issue is solved.
1. Used TimmyDeans rollback V4 tool to a 500 rom
2. SD card was not recognized in CWM or Stock recovery. Was however recognized in the HC OS.
3. Formatted SD Card using Mini Tool formatting app. Format primary partition only to fat32 (defaults)
4. Decrypted and pulled update.zip from this 501 HC full update rom
Acer_A501_1.309.02_4.031.24_COM_GEN1
http://forum.xda-developers.com/showthread.php?t=1816560
5. Did OTA update to 3.2.1
6. No more OTA available, even after installing Acer Update Enhancment tool.
7. Downloaded and used Blackthund3rs Bootloader management app
http://forum.xda-developers.com/showthread.php?t=1622425
8.Downloaded V8 and CWM package, unzipped to the same folder as the tool
9. Ran the 500NVFlashapx app.
10. After completion, booted to CWM recovery, wiped and formatted, and install Moscow Desire's RaptorX almost stock ICS rom.
Works as advertised.
MD
Yep. All thanks to MD's patience and assistance throughout these steps..
Moscow Desire said:
Just to fill you in, this issue is solved.
1. Used TimmyDeans rollback V4 tool to a 500 rom
2. SD card was not recognized in CWM or Stock recovery. Was however recognized in the HC OS.
3. Formatted SD Card using Mini Tool formatting app. Format primary partition only to fat32 (defaults)
4. Decrypted and pulled update.zip from this 501 HC full update rom
Acer_A501_1.309.02_4.031.24_COM_GEN1
http://forum.xda-developers.com/showthread.php?t=1816560
5. Did OTA update to 3.2.1
6. No more OTA available, even after installing Acer Update Enhancment tool.
7. Downloaded and used Blackthund3rs Bootloader management app
http://forum.xda-developers.com/showthread.php?t=1622425
8.Downloaded V8 and CWM package, unzipped to the same folder as the tool
9. Ran the 500NVFlashapx app.
10. After completion, booted to CWM recovery, wiped and formatted, and install Moscow Desire's RaptorX almost stock ICS rom.
Works as advertised.
MD
Click to expand...
Click to collapse
Acer A501 OS refreshment
Moscow Desire said:
Your best bet is to install a good 501 HC 3.2 and get on HC for your 501.
The files are available. What you'll probably want is a full HC Update rom for the 501. Note that some of these Acer roms are encrypted, so you'll need to decrypt it first. You can find the decrypting tool in the Themes and Apps forum, as a "Sticky". After decrypting, you can pull the update.zip out of it, and copy to Ext SD (do not extract, just pull the update file out). Boot the tab holding Vol- and PWR I believe. Might be Vol+ but I can't remember. This should force the tab to look for update.zip on your SD and install it.
I would use this one;
Acer_A501_1.309.02_4.031.24_COM_GEN1
After it installs, and you get it set up, you need to get Acer Update Enhancer from the Play Store. This will allow your tab to get the ICS OTA.
Keep in mind, there is only 1 official ICS OTA update for the 501, so don't expect more. It may do it in 2 steps though.
If you want root on ICS, there is really only 1 way to get true root and adb system remounts. And that's to flash the V8 unlocked ICS Bootloader, and flash an insecure boot.image. There's currently a small package that'll give you somewhat root, but it's a pain and really doesn't do a good job. So it's better to get the V8 and unsecure boot image. Might be a good idea to also install CWM Recovery at the same time.
Get the correct rom installed first, then check back if you need help.
Oh yeah, one more thing. When you are on HC 3.2, get your UID number and write it down somewhere. You need this as a safety precaution. There's a good sticky thread on how to do it. Pretty simple really.
MD
Click to expand...
Click to collapse
I am embarking on a very crucial mission for my Acer A501 . Its tablet OS refreshment. I have spoken and written to Acer but all my pleas have fallen on deaf ears. At last i stumbled on this site and WOW ! I am downloading the Acer_A501_1.309.02_4.031.24_COM_GEN1 and will flash as per the instruction. But I am finding difficult to locate the "sticky" software for the decryption the above. can you please help me locate the same.
I really appreciate your help and thank you in advance
jonnybrave said:
I am embarking on a very crucial mission for my Acer A501 . Its tablet OS refreshment. I have spoken and written to Acer but all my pleas have fallen on deaf ears. At last i stumbled on this site and WOW ! I am downloading the Acer_A501_1.309.02_4.031.24_COM_GEN1 and will flash as per the instruction. But I am finding difficult to locate the "sticky" software for the decryption the above. can you please help me locate the same.
I really appreciate your help and thank you in advance
Click to expand...
Click to collapse
Here is the decryption tool. Located in themes and apps.
http://forum.xda-developers.com/showthread.php?t=1869505
Good Luck!
MD
Trouble installing update.zip for A501
Moscow Desire said:
Here is the decryption tool. Located in themes and apps.
http://forum.xda-developers.com/showthread.php?t=1869505
Good Luck!
MD
Click to expand...
Click to collapse
Hi MD,
I have Acer Iconia A501 tablet. My tablet suddenly showed andriod logo with exclamation mark when it was being used. Upon looking at your posts, I found the resolution which I tried. I am not expert in this all, but I tried running your ROM "41-124-01-A500-update" from one of your posts which was actually meant for A500. This resolved the issue successfully and tablet was up and running.
Then further I found full ROM for A501 as mentioned below and thought that I should try the ROM meant for the model of my tablet.
I successfully decrypted the ROM that you mentioned "Acer_A501_1.309.02_4.031.24_COM_GEN1"
When I tried to update it with the mentioned ROM update.zip, it did updated it from SD card and passed android symbol with those gears running. However, when it restarted the tablet by itself, it showed ACER logo and then it showed "ANDROID" (spelling in blue color) which kept on flikering slowly for long long time....for more than 30 minutes and did not moved further. Can you please let me know whats could be wrong?
I also tried ICS ROM, but that didn't worked (it failed). So after couple of trail and error, I moved back to A500 ROM update.zip which I knew that is installing successfully.
Can you please let me know what shall be done in case I want update.zip for A501? It will be highly appreciated if you can upload update.zip directly that I can use and that gets installed successfully.
Regards,
Muk
mukapril said:
Hi MD,
I have Acer Iconia A501 tablet. My tablet suddenly showed andriod logo with exclamation mark when it was being used. Upon looking at your posts, I found the resolution which I tried. I am not expert in this all, but I tried running your ROM "41-124-01-A500-update" from one of your posts which was actually meant for A500. This resolved the issue successfully and tablet was up and running.
Then further I found full ROM for A501 as mentioned below and thought that I should try the ROM meant for the model of my tablet.
I successfully decrypted the ROM that you mentioned "Acer_A501_1.309.02_4.031.24_COM_GEN1"
When I tried to update it with the mentioned ROM update.zip, it did updated it from SD card and passed android symbol with those gears running. However, when it restarted the tablet by itself, it showed ACER logo and then it showed "ANDROID" (spelling in blue color) which kept on flikering slowly for long long time....for more than 30 minutes and did not moved further. Can you please let me know whats could be wrong?
I also tried ICS ROM, but that didn't worked (it failed). So after couple of trail and error, I moved back to A500 ROM update.zip which I knew that is installing successfully.
Can you please let me know what shall be done in case I want update.zip for A501? It will be highly appreciated if you can upload update.zip directly that I can use and that gets installed successfully.
Regards,
Muk
Click to expand...
Click to collapse
Hey Muk, I can probably guess the ROM you installed doesn't do data wipes and such, so it caused an animation loop.
Try this one. It's an SD ROM, so it "should" wipe your Data, along with installing the ROM.
https://mega.co.nz/#!NZBlBSLQ!mOHICp7gbinkYeHCvrEz7aKXsWQjjquAWq_XC_lSQzk
As you probably discovered, Acer has pretty much removed almost all tablet ROMs. I snagged a few the other day, then checked yesterday, and they removed all from their support site.
I would guess they are getting out of the tablet business.
Also, they shut down their OTA Update servers for a few months now.
Acer A501
mukapril said:
Hi MD,
I have Acer Iconia A501 tablet. My tablet suddenly showed andriod logo with exclamation mark when it was being used. Upon looking at your posts, I found the resolution which I tried. I am not expert in this all, but I tried running your ROM "41-124-01-A500-update" from one of your posts which was actually meant for A500. This resolved the issue successfully and tablet was up and running.
Then further I found full ROM for A501 as mentioned below and thought that I should try the ROM meant for the model of my tablet.
I successfully decrypted the ROM that you mentioned "Acer_A501_1.309.02_4.031.24_COM_GEN1"
When I tried to update it with the mentioned ROM update.zip, it did updated it from SD card and passed android symbol with those gears running. However, when it restarted the tablet by itself, it showed ACER logo and then it showed "ANDROID" (spelling in blue color) which kept on flikering slowly for long long time....for more than 30 minutes and did not moved further. Can you please let me know whats could be wrong?
I also tried ICS ROM, but that didn't worked (it failed). So after couple of trail and error, I moved back to A500 ROM update.zip which I knew that is installing successfully.
Can you please let me know what shall be done in case I want update.zip for A501? It will be highly appreciated if you can upload update.zip directly that I can use and that gets installed successfully.
Regards,
Muk
Click to expand...
Click to collapse
A big thank you to Moscow. I have tried the above link but still no go.. I have seen on Acer website they have updated the OS but all Android 4.0 ICS and nothing with Honeycomb. The tablet was initially with Honeycomb. Please advice. Thank you and Best Regards.
Trouble installing ROM for A501
jonnybrave said:
A big thank you to Moscow. I have tried the above link but still no go.. I have seen on Acer website they have updated the OS but all Android 4.0 ICS and nothing with Honeycomb. The tablet was initially with Honeycomb. Please advice. Thank you and Best Regards.
Click to expand...
Click to collapse
Hi MD,
Thanks for your super fast response. I am downloading the ROM for A501 from the link provided by me. I will update you if it works in my tab.
I forgot to mention you about one message that I received once tablet is restarted. So, once ROM for A501 from SD card has performed its job successfully....that is that android symbol with gears in its tummy is successfully finished and tablet restarts. It shows "Acer" (spelling logo) and then after it gets stuck at "android" (spelling logo). Between these two, it displays two lines messages on top left corner for 2-3 seconds that the "blob is illegal - abort" and then gets stuck at "android" (spelling logo). I think this might be useful for you to identify something.
Another thing about wiping out the data, in starting when we press volume down and power button, it does display message about SD card (still not not sure about whether it might be wiping out the data or not....I believe you might be correct that it might not be wiping out the data).
Another thing, that I found in my backup is that when I purchased this tab (A501), I downloaded HoneyComb 3.2 Kernel Source Code from the Acer support site. Is this something that you can do magic with and provide me with update.zip? Please let me know....if you can do magic with this, then let me know how shall I share it with you.
Regards,
Muk
Trouble installing ROM for A501
Hi MD,
Thanks for your super fast response.
I tried downloading the ROM for A501 from the link provided by you. It downloaded it from the cloud, but at the very end it displayed message "Decryption Error". Still I tried extracting "update.zip" from the zip file, but it displayed message that the archive is corrupt and file is corrupt. Can you please check at your end and provide me with fresh link or directly with update.zip? For your reference I have attached screenshots of errors.
I forgot to mention you about one message that I received once tablet is restarted. So, once ROM for A501 from SD card has performed its job successfully....that is that android symbol with gears in its tummy is successfully finished and tablet restarts. It shows "Acer" (spelling logo) and then after it gets stuck at "android" (spelling logo). Between these two, it displays two lines messages on top left corner for 2-3 seconds that the "blob is illegal - abort" and then gets stuck at "android" (spelling logo). I think this might be useful for you to identify something.
Another thing about wiping out the data, in starting when we press volume down and power button, it does display message about SD card (still not not sure about whether it might be wiping out the data or not....I believe you might be correct that it might not be wiping out the data).
Another thing, that I found in my backup is that when I purchased this tab (A501), I downloaded HoneyComb 3.2 Kernel Source Code from the Acer support site. Is this something that you can do magic with and provide me with update.zip? Please let me know....if you can do magic with this, then let me know how shall I share it with you.
Regards,
Muk
Trouble installing ROM for A501
Hi MD,
Please read my earlier message and then read this one.
Thanks a lot....your answer about my first problem resolved everything.... (your answer was "that the ROM that I am trying to install is not clearing the data"...I verified that the ROM is clearing the cache, but not the user data. I can confidently say that you correctly identified the issue as when the ROM installation was stuck at "android"....I switched off my tablet and tried installing again the old ROM for A500 which I knew that it is working and instead of asking me to configure the tablet (i.e. time zone, date & time setup, etc.) after installation, it simply logged in and started my tablet as usual....that means that when I was trying to install ROM for A501, it was not clearing user data and was then hanging).
Now coming back to the link that you sent me in previous message, I was able to download the zip file successfully in the second attempt. I extracted the update.zip and it did not work. It showed the similar problem of getting stuck at "android". However, with your great answer that you gave me, I cleared the user data and cache manually by pressing vol up + power buttons simultaneously and then when "acer" symbol displays, releasing only power button and turning on and off the lock button. This cleared user data and cache. After that, since update.zip (that you provided) was already in my SD card, it installed the ROM and tablet works perfectly. Thanks a lot....:good:
One question, when it asked me about the zone, it had only few countries like US, UK, etc. I couldn't find Australia...is it because this ROM not for Australia? I understand that this is not an issue, but if you find anything for Australia, do send me.
Another thing, is this HoneyComb 3.2? Will 3G and GPS work in this one?
Do let me know if you can do some magic with HoneyComb 3.2 kernel source code that I have as mentioned earlier.
Regards,
Muk
mukapril said:
Hi MD,
Please read my earlier message and then read this one.
Thanks a lot....your answer about my first problem resolved everything.... (your answer was "that the ROM that I am trying to install is not clearing the data"...I verified that the ROM is clearing the cache, but not the user data. I can confidently say that you correctly identified the issue as when the ROM installation was stuck at "android"....I switched off my tablet and tried installing again the old ROM for A500 which I knew that it is working and instead of asking me to configure the tablet (i.e. time zone, date & time setup, etc.) after installation, it simply logged in and started my tablet as usual....that means that when I was trying to install ROM for A501, it was not clearing user data and was then hanging).
Now coming back to the link that you sent me in previous message, I was able to download the zip file successfully in the second attempt. I extracted the update.zip and it did not work. It showed the similar problem of getting stuck at "android". However, with your great answer that you gave me, I cleared the user data and cache manually by pressing vol up + power buttons simultaneously and then when "acer" symbol displays, releasing only power button and turning on and off the lock button. This cleared user data and cache. After that, since update.zip (that you provided) was already in my SD card, it installed the ROM and tablet works perfectly. Thanks a lot....:good:
One question, when it asked me about the zone, it had only few countries like US, UK, etc. I couldn't find Australia...is it because this ROM not for Australia? I understand that this is not an issue, but if you find anything for Australia, do send me.
Another thing, is this HoneyComb 3.2? Will 3G and GPS work in this one?
Do let me know if you can do some magic with HoneyComb 3.2 kernel source code that I have as mentioned earlier.
Regards,
Muk
Click to expand...
Click to collapse
I'm mobile right now, so can't go into big detail.
In your settings, about tablet, you can always find info on which specific OS you have. If you indeed have an A501 and the settings tells you that your tablet is a 501, then your 3g and GPS should function.
The only 2 differences between an A500 and an A501 is of course 3g. Also, they use different GPS radios. So you can install 500 Roms on a 501 and vice versa. Just the above 2 items won't work. Also, I believe I gave you a 3.2.x ROM. Getting it to ICS 4.0.4 may be a problem.
I revived my own 501 last night by putting the motherboard in the oven, but now it doesn't read my ext SD card, so I may be stuck on 3.2. Eh, no problem.
mukapril said:
Hi MD,
Please read my earlier message and then read this one.
Thanks a lot....your answer about my first problem resolved everything.... (your answer was "that the ROM that I am trying to install is not clearing the data"...I verified that the ROM is clearing the cache, but not the user data. I can confidently say that you correctly identified the issue as when the ROM installation was stuck at "android"....I switched off my tablet and tried installing again the old ROM for A500 which I knew that it is working and instead of asking me to configure the tablet (i.e. time zone, date & time setup, etc.) after installation, it simply logged in and started my tablet as usual....that means that when I was trying to install ROM for A501, it was not clearing user data and was then hanging).
Now coming back to the link that you sent me in previous message, I was able to download the zip file successfully in the second attempt. I extracted the update.zip and it did not work. It showed the similar problem of getting stuck at "android". However, with your great answer that you gave me, I cleared the user data and cache manually by pressing vol up + power buttons simultaneously and then when "acer" symbol displays, releasing only power button and turning on and off the lock button. This cleared user data and cache. After that, since update.zip (that you provided) was already in my SD card, it installed the ROM and tablet works perfectly. Thanks a lot....:good:
One question, when it asked me about the zone, it had only few countries like US, UK, etc. I couldn't find Australia...is it because this ROM not for Australia? I understand that this is not an issue, but if you find anything for Australia, do send me.
Another thing, is this HoneyComb 3.2? Will 3G and GPS work in this one?
Do let me know if you can do some magic with HoneyComb 3.2 kernel source code that I have as mentioned earlier.
Regards,
Muk
Click to expand...
Click to collapse
Hello mukapril .. may you provide me with the Honeycomb ROM which I might try ?
Thanking you and Best Regards
Trouble installing A501 ROM
Moscow Desire said:
I'm mobile right now, so can't go into big detail.
In your settings, about tablet, you can always find info on which specific OS you have. If you indeed have an A501 and the settings tells you that your tablet is a 501, then your 3g and GPS should function.
The only 2 differences between an A500 and an A501 is of course 3g. Also, they use different GPS radios. So you can install 500 Roms on a 501 and vice versa. Just the above 2 items won't work. Also, I believe I gave you a 3.2.x ROM. Getting it to ICS 4.0.4 may be a problem.
I revived my own 501 last night by putting the motherboard in the oven, but now it doesn't read my ext SD card, so I may be stuck on 3.2. Eh, no problem.
Click to expand...
Click to collapse
Hi MD,
Apologies for very long replies. Wanted to convey the message in detail how I did it so that it might help someone else like me.
Thanks for your response. I have tested it, 3G and GPS is working fine. I believe, before my tab encountered this problem, it was having version 4 which should be ICS. At that stage I didn't had any problem with my tab...I believe it was there for long time.
If you have good known ROM for ICS, please forward me I can try on my tab. If it doesn't work, then will re-install the Honeycomb that you sent earlier.
One more question....when I try to update the system from "About Tablet" in Settings, why it displays message the the "network is poor" and advices to move to better coverage? Though, I am just besides my WiFi modem and coverage is almost 100%.
And @jonnybrave: If you are referring to the ROM that I successfully installed which was sent by MD earlier, then it does not need any decryption. So you can use the link sent by MD earlier in this post. And if you are referring to the KernelSourceCode that I mentioned earleir, then it needs some kind of processing in Linux machine and then you can create some image.....this is was I know about it....sorry not an andrion guru. Please let me know what you are referring to.
Regards,
Mukesh
mukapril said:
One more question....when I try to update the system from "About Tablet" in Settings, why it displays message the the "network is poor" and advices to move to better coverage? Though, I am just besides my WiFi modem and coverage is almost 100%.
Click to expand...
Click to collapse
You get the message as do all 500/501 owners (it can change depending on version of Rom).
Acer no longer gives updates to any of their devices (regardless of age). These are otherwise known as OTA Updates. So they have closed their update servers, so now we get some "message" that absolutely means nothing.
I suppose Acer is getting out of the Android business and no longer supports anything. Nice job Acer.
As for updating to ICS (or any other version), I have a few update files. Generally though, the update files must be matched to the current version of your tablet. Sometimes you can run a "full update" and it will work.
The problem, is these tablets are getting old, and the nand memory can go bad. Running an update can cause a variety of problems such as "Stuck in APX" mode, stuck at bootloader, stuck at boot animation. Then we have to go back to the EUUS file, or an old SD ROM file. So you run the risk of doing things all over again, and the risk that it just won't work again. (I spent a couple hours last night, and was almost ready to throw it in the garbage)
For example, I'm pretty much stuck at 3.0.x or 3.2.x. I've already disassembled the tablet and put the mainboard in the oven, just to get it back to life! And after numerous attempts to get ICS on it, I've pretty much given up before it hard bricks again. In fact, I can't get a 3.2.x EUUS to work on it, so it is stuck at the 3.0.x ATT EUUS. Eh, it's my little girls tab, so as long as it gets You Tube and browser, it's pretty much ok.
Trouble installing A501 ROM
Hi MD,
I am in the same boat as you...lol...This tablet is mostly used by my daughter and as long as it is solving my daughter's purpose, we are happy
I was just curious about that message as to why that is happenning, but after your clarification, it is clear to me as to why it is happenning.
My tablet is working as normal and everything is working fine...so we are happy with what we have.
Thanks a lot!
Regards,
Muk
---------- Post added at 03:04 AM ---------- Previous post was at 02:48 AM ----------
jonnybrave said:
Hello mukapril .. may you provide me with the Honeycomb ROM which I might try ?
Thanking you and Best Regards
Click to expand...
Click to collapse
Hi Jonny,
If you are referring to the ROM that I successfully installed which was sent by MD earlier, then it does not need any decryption. So you can use the link sent by MD earlier in this post. And if you are referring to the KernelSourceCode that I mentioned earleir, then it needs some kind of processing in Linux machine and then you can create some image.....this is was I know about it....sorry not an andrion guru. Please let me know what you are referring to.
Regards,
Muk
Hello,
I've been searching for almost 2 weeks in forums how to fix my A500 frozen on logo Acer (following a crash when I was launching a game).
I've tried to boot on these 2 ics roms in recovery mode : http://forum.xda-developers.com/showthread.php?t=1699277, the install starts and then the Android man falls...
I've tried to flash (flash.dat) in apx and my computers disconnects the tablet...
I've tried to get my cpuid with windows ans ubuntu : didn't work...
Maybe someone here is going to have an idea to help me? There seem to be very competent members, here!
(I hope my english is good enough to make you understand me, sorry if it doesn't look very clear to you, but I'm French)
EASY
If you go to tegraowners forum and read/install one of the recoveries there - in the various topics it will explain how to "really format data-data/media"
From there you will once again be able to install roms etc.
freightyard said:
If you go to tegraowners forum and read/install one of the recoveries there - in the various topics it will explain how to "really format data-data/media"
From there you will once again be able to install roms etc.
Click to expand...
Click to collapse
Thanks for your reply. I went to tegraowners forums and the only post I found about really format data doesn't fit, because my tablet doesn't start properly and I can't go to a menu to choose options, I can only start in recovery mode... (but maybe I didn't watch the right thread, please tell me)
recovery
woukou said:
Thanks for your reply. I went to tegraowners forums and the only post I found about really format data doesn't fit, because my tablet doesn't start properly and I can't go to a menu to choose options, I can only start in recovery mode... (but maybe I didn't watch the right thread, please tell me)
Click to expand...
Click to collapse
that's what you need the recovery
just get a tegraowners recovery and flash it with your recovery
BTW
what recovery do you have on your tab presently
freightyard said:
that's what you need the recovery
just get a tegraowners recovery and flash it with your recovery
BTW
what recovery do you have on your tab presently
Click to expand...
Click to collapse
The tablet had no recovery on an sd card (no sd card at all before the crash!), so I've downloaded many different updates since the crash, and it doesn't work. Maybe it was not the good solution, though;.. Which recovery do you advise me to download?
recovery
woukou said:
The tablet had no recovery on an sd card (no sd card at all before the crash!), so I've downloaded many different updates since the crash, and it doesn't work. Maybe it was not the good solution, though;.. Which recovery do you advise me to download?
Click to expand...
Click to collapse
I think maybe you misunderstand what recovery is
It is a low level program that is on an internal partition
you open it by holding volume- while pushing power button
when it opens if it just immediately tries to load from the sd card then it is stock
if it opens with a menu then it should also say somewhere what recovery it is.
It is also somewhat important to know what android you had on the tab and whether it was rooted and what bootloader version.
there is an A500 manager at tegraowners by blackthund3r that will update the bootloader install a recovery and root the tablet.
if it's an official acer rom the afterota will probably help fix it.
barring all that - if you sign up to be a tegraowner member and pm(private message) me I can dropbox you babsector as well.
suggested recovery would be the new twrp or the 1.7.3 cwm recovery
freightyard said:
I think maybe you misunderstand what recovery is
It is a low level program that is on an internal partition
you open it by holding volume- while pushing power button
when it opens if it just immediately tries to load from the sd card then it is stock
if it opens with a menu then it should also say somewhere what recovery it is.
It is also somewhat important to know what android you had on the tab and whether it was rooted and what bootloader version.
there is an A500 manager at tegraowners by blackthund3r that will update the bootloader install a recovery and root the tablet.
if it's an official acer rom the afterota will probably help fix it.
barring all that - if you sign up to be a tegraowner member and pm(private message) me I can dropbox you babsector as well.
suggested recovery would be the new twrp or the 1.7.3 cwm recovery
Click to expand...
Click to collapse
Thank you for these explanations, you're right , I was confused about all that!
To be clear about what you said : when I push volume- and power, there are a few lines written (erasing... sd car... booting recovery kernel...) then the Android fells down. so it is stock, isn't it?
The tablet wasn't rooted I believe because I never touched anything since I bought it ( october 2011) but I can't find on the box or notice which Android was on it...
But I don't understand your advice (I don't know a lot about tablets + foreign language : forgive me!) : do you advice me to try "an A500 manager at tegraowners by blackthund3r that will update the bootloader" or try "babsector" (don't know what it is...)
By the way I registered on tegraowners just now, as woukou.
Thanks a lot to take time for my problem
recovery
woukou said:
Thank you for these explanations, you're right , I was confused about all that!
To be clear about what you said : when I push volume- and power, there are a few lines written (erasing... sd car... booting recovery kernel...) then the Android fells down. so it is stock, isn't it?
The tablet wasn't rooted I believe because I never touched anything since I bought it ( october 2011) but I can't find on the box or notice which Android was on it...
But I don't understand your advice (I don't know a lot about tablets + foreign language : forgive me!) : do you advice me to try "an A500 manager at tegraowners by blackthund3r that will update the bootloader" or try "babsector" (don't know what it is...)
By the way I registered on tegraowners just now, as woukou.
Thanks a lot to take time for my problem
Click to expand...
Click to collapse
There are numerous methods to fix this
first login to tegraowners and pm me with
Did you get updates from acer and install them since you bought the tablet
Do you know if it was Ice Cream Sandwich or Honeycomb running on the tablet
do you have your cpuid or know what it is ?
Is your tablet an Acer A500 ,A501 or something other ?
freightyard said:
There are numerous methods to fix this
first login to tegraowners and pm me with
Did you get updates from acer and install them since you bought the tablet
Do you know if it was Ice Cream Sandwich or Honeycomb running on the tablet
do you have your cpuid or know what it is ?
Is your tablet an Acer A500 ,A501 or something other ?
Click to expand...
Click to collapse
First, I can't mp you because "We are sorry, but you are not authorised to use this feature. You may have just registered here and may need to participate more to be able to use this feature. ", maybe you can mp me and I will reply...
But I can answer you here:
- I only had 1 update since I bought the tablet (maybe 1 year ago) and it was the regular Acer update.
- I don't know at all if it was Ice Cream sandwich or Honeycomb on it (bought in october 2011, and I still have the box if it can help...)
- I don't have the cpuid, and I tried yesterday to get it through Windows (when the tablet appears in usb) and through Ubuntu (file called apx.c, etc...) and I didin't work unfortunately...
- My tablet is A500 Iconia tab
I hope that will help...
woukou said:
First, I can't mp you because "We are sorry, but you are not authorised to use this feature. You may have just registered here and may need to participate more to be able to use this feature. ", maybe you can mp me and I will reply...
But I can answer you here:
- I only had 1 update since I bought the tablet (maybe 1 year ago) and it was the regular Acer update.
- I don't know at all if it was Ice Cream sandwich or Honeycomb on it (bought in october 2011, and I still have the box if it can help...)
- I don't have the cpuid, and I tried yesterday to get it through Windows (when the tablet appears in usb) and through Ubuntu (file called apx.c, etc...) and I didin't work unfortunately...
- My tablet is A500 Iconia tab
I hope that will help...
Click to expand...
Click to collapse
without the cpuid there is little you can do
try reading through and running this http://forum.xda-developers.com/showpost.php?p=26618772&postcount=1
freightyard said:
without the cpuid there is little you can do
try reading through and running this http://forum.xda-developers.com/showpost.php?p=26618772&postcount=1
Click to expand...
Click to collapse
I'm going to read it, thanks!
freightyard said:
without the cpuid there is little you can do
try reading through and running this http://forum.xda-developers.com/showpost.php?p=26618772&postcount=1
Click to expand...
Click to collapse
Hello,
I read the whole page, I downloaded the 2 files (1 big-1 tiny) and I guess I'm stupid, because I don't know how to use them...
Could someone help me? Thanks!
woukou said:
Hello,
I read the whole page, I downloaded the 2 files (1 big-1 tiny) and I guess I'm stupid, because I don't know how to use them...
Could someone help me? Thanks!
Click to expand...
Click to collapse
Looks like your in a similar situation to me.
IF your any good with Linux read up here to get your CPUID http://forum.xda-developers.com/showthread.php?t=1751978
then your 1 step closer.
follow my thread here as well for things to read & try http://forum.xda-developers.com/showthread.php?t=2729674
.
Still bricked...
Hello,
It's beeen a long time ( lot of work and not many time to spend on the tablet...) but I did try all tips you gave me, and I realize I can't go any further without that CPUID!
I tried methods to get CPUID that are described on this post :
http://forum.xda-developers.com/showthread.php?p=25429111#post25429111
- With A500 manager : my PC sees my connected "in APX" tablet, but it doesn't want to give me a serial number...
- With usb deview I can get the snid (that is also on the box) and that is only 11 characters...
- With Ubuntu : the PC doesn't recognize the tablet at all (normal or APX mode)
- Methods 4, 6 and 7 won't work because my tablet is stuck on Acer logo
And I have no idea how to use methods 2 and 5 (sorry...)
Are there any other methods to try with my PC (Windows 7- X64)
Can someone help me? I'm crazy about that tablet that starts but doesn't work!
Thanks in advance if you can!
Tried these too:
http://forum.xda-developers.com/showthread.php?t=2755126
Nothing...
Hurra! and Noooo
Hello,
I managed to bring my tablet to life! (with getting my cpuid with Ubuntu and updating with EUU)
BUT now I want to get a real update and I can't! When I launch it, the tablet says "you wifi is too unstable, try later" I tried at a neighbour's, and it's the same : it comes from the tablet!
What would you suggest?
woukou said:
Hello,
I managed to bring my tablet to life! (with getting my cpuid with Ubuntu and updating with EUU)
BUT now I want to get a real update and I can't! When I launch it, the tablet says "you wifi is too unstable, try later" I tried at a neighbour's, and it's the same : it comes from the tablet!
What would you suggest?
Click to expand...
Click to collapse
Just for info, it seems Acer has shut down it's update servers. I have an a501 (recently bricked forever), and an A701. Neither can get updates. Usually, I get the message "Network coverage is poor, try a different location". So it seems these are messages generated from the tablet. More than likely as a triggered response from their old servers.
I'm on direct wifi
Also, acer has been deleting their available update ROMs from their support servers. I grabbed some a couple days ago, and now today they are gone!
Pretty sure Acer is getting out of the tablet business, or at least they act like it.
Ok thanks for the information, it's not only my tablet that can't update!
But, what do you think would be the best (and most simple!) solution to run ICS like it used to do?
Every link I found to get an update for 3.0.1 are dead...
I'm not a specialist, and all tutorials for rooting and install ICS (rom or custopm) seem complicated and risky!
Thanks in advance for your advice
woukou said:
Ok thanks for the information, it's not only my tablet that can't update!
But, what do you think would be the best (and most simple!) solution to run ICS like it used to do?
Every link I found to get an update for 3.0.1 are dead...
I'm not a specialist, and all tutorials for rooting and install ICS (rom or custopm) seem complicated and risky!
Thanks in advance for your advice
Click to expand...
Click to collapse
Well, there are a couple of methods to update manually. The key, is getting the correct match of 3.x.x to 4.x.x. Sometimes the ICS updates will use a "patch" install, and it's very specific to which current ROM is installed.
Tell you what, remind me again which tablet (500 or 501) you have, and I'll take a look at what I have on my own servers, and maybe we can get you upgraded manually. Pretty simple really.
Moscow Desire said:
Well, there are a couple of methods to update manually. The key, is getting the correct match of 3.x.x to 4.x.x. Sometimes the ICS updates will use a "patch" install, and it's very specific to which current ROM is installed.
Tell you what, remind me again which tablet (500 or 501) you have, and I'll take a look at what I have on my own servers, and maybe we can get you upgraded manually. Pretty simple really.
Click to expand...
Click to collapse
Thanks!
I tell you all what I know and can read on the tablet:
Acer Iconia tab A50016GB Wifi
Android version 3.0.1
Kernel version 2.6.36.3-00001-gf991e5d
Build number ACER_A500_1.016.05_COM_GEN1
I hope it's enough, thanks again!
woukou said:
Thanks!
I tell you all what I know and can read on the tablet:
Acer Iconia tab A50016GB Wifi
Android version 3.0.1
Kernel version 2.6.36.3-00001-gf991e5d
Build number ACER_A500_1.016.05_COM_GEN1
I hope it's enough, thanks again!
Click to expand...
Click to collapse
You can try those full ICS updates in the first thread of this forum. I believe they are full a500 ICS updates. There are 4 of them, and you may have to try them all. One of them may work. Not sure if they will update from 3.0.1 though.
I'm mobile right now, and can't personally check them.
Q&A for Acer Stock Firmware Files List (Full, Update and EUUs)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Looking to do a stock install of 3.2 on A501
blackthund3r said:
LIST OF FILES
Please note that none of these files are rooted and/or tweaked! They are stock Android ROMs from Acer and designed for stock recovery!
Flashing them will remove custom recovery and/or custom bootloader! You will be fully stock! Update zips may not install if you have modified your device in any way. If unsure use a full package! You need an EUU package only if your device is bricked as it will be completely wiped clean in the process!
-----------------------------
I am looking for the 3G version the 3.2 stock ROM to do a fresh install on my A501
The link from Vache seems dead.. can anyone please help to provide that particular ROM?
Thanks a lot. Desperately need some help as I'm password locked out!
Click to expand...
Click to collapse
sskhaliq said:
blackthund3r said:
LIST OF FILES
Please note that none of these files are rooted and/or tweaked! They are stock Android ROMs from Acer and designed for stock recovery!
Flashing them will remove custom recovery and/or custom bootloader! You will be fully stock! Update zips may not install if you have modified your device in any way. If unsure use a full package! You need an EUU package only if your device is bricked as it will be completely wiped clean in the process!
-----------------------------
I am looking for the 3G version the 3.2 stock ROM to do a fresh install on my A501
The link from Vache seems dead.. can anyone please help to provide that particular ROM?
Thanks a lot. Desperately need some help as I'm password locked out!
Click to expand...
Click to collapse
Best to just get stock ICS. Why are you password locked? Is the device stolen? I can easily help you get past it but I'm not sure whether I should.
Click to expand...
Click to collapse
Thanks blackthunder. It's our personal device, my wife set the password some time back and is sure she hasn't forgotten but for some reason it's not being accepted. We can't figure out why! I have the original receipt and box etc in case anyone's interested!
I tried the stock ICS Rom by naming it update.zip and rebooting into recovery, but that gets stuck at the Android guy logo immediately. Also tried 3.2 before that via a link from this page, and that seems to work until the progress bar hits about 80%. Then it just reboots back to the dreaded locked screen. From what I understand I can only do a reinstall of the same ROM version that's currently installed? We have a password lock on it, and not pattern. Would highly appreciate any help. . Really want this thing to start working again. It's practically new [emoji20]
Guys any idea? Really desperate here. Thanks in advance!!
sskhaliq said:
Thanks blackthunder. It's our personal device, my wife set the password some time back and is sure she hasn't forgotten but for some reason it's not being accepted. We can't figure out why! I have the original receipt and box etc in case anyone's interested!
I tried the stock ICS Rom by naming it update.zip and rebooting into recovery, but that gets stuck at the Android guy logo immediately. Also tried 3.2 before that via a link from this page, and that seems to work until the progress bar hits about 80%. Then it just reboots back to the dreaded locked screen. From what I understand I can only do a reinstall of the same ROM version that's currently installed? We have a password lock on it, and not pattern. Would highly appreciate any help. . Really want this thing to start working again. It's practically new [emoji20]
Click to expand...
Click to collapse
Your beat bet is using an EUUs package to wipe the tablet and reset back to 3.0.1 then use Flash Tool to get CWM or TWRP + a decent ROM
blackthund3r said:
Your beat bet is using an EUUs package to wipe the tablet and reset back to 3.0.1 then use Flash Tool to get CWM or TWRP + a decent ROM
Click to expand...
Click to collapse
To install EUUs, is it the same process; rebooting with power+volume and flashing via SD card? What version EUUs do you think I need, currently I have 3.2 installed. Is there a guide for above?... will be a lot of help. Many thanks
sskhaliq said:
To install EUUs, is it the same process; rebooting with power+volume and flashing via SD card? What version EUUs do you think I need, currently I have 3.2 installed. Is there a guide for above?... will be a lot of help. Many thanks
Click to expand...
Click to collapse
Actually, even easier.....use the APX Flash Tool to get yourself a CWM Image (you'll need your SBK....there's a fair few guides on obtaining this) then do a wipe data/factory reset within CWM.
From there it's fairly easy to side load the latest Acer ROM.
Thanks. I'll try it out over the weekend! Appreciate your help!
God morning! For the apx tool, I'm not sure if USB debugging option is selected, never ticked that myself consciously. Is it OK to go ahead?
Tried using the apx tool after downloading the Acer USB drivers and in short no luck.
Had to go the manual route for flashing since I don't have USB debugging enabled.
Tried two packages, one honeycomb bundle 6 and then also tried a later one for ICS.
It goes thru the motions enters APX mode with confirmation as well on the tab screen, without any hiccups right to the end. But then reboots to the old dastardly lock screen asking for password!
Any ideas? Already backed up using mobo app so am OK to wipe clean and start anew.
Acer b1-720 update.zip
Do you have any update.zip firmwares for an acer B1-720? Its the only way i can restore my tablet
Good sir i'm new with this stuff, will you teach me how to flash in my acer a500 tablet and what is the right firmware because my acer a500 stuck oin logo, hope yuo will teach how. Thank you and more power
Good day sir i'm sorry sir but really dont which should i flash on my acer a500 that stuck on logo, pls help me which file shoukd i flash and step by step how to flash thank you for the help
Iconia
Guyz.. Im not finding any firmware for Acer iconia b1 711. And this is bricked too. I only have an update file which i received from AcerAcer. And im not able to install it too. Plz help...
Options for upgrading an Acer A500: Acer_A500_4.010.15_COM_GEN1
OK, heres a totally noob question. I have an Acer A500 I bought used. It has been rooted apparently. Has the ClockWorkMod bootloader installed, v5.0.
My question is, what are my options to upgrade this tablet and is there a thread with instructions on which firmware files to use, how far can I go with upgrading the A500 (ICS?). Not really looking to trick it out and go the whole mod route, would be happy with stock firmware, just looking to make it a little more up to date and, above all _stable_! The main issue I have with it now is the wifi craps out every month or so and I have to do a refresh and wipe all info and start over.
I used to get prompted to install a system update, and every time, it would fail with the dead Android dude on his back....so sad. Now, it just tells me, "Network Coverage is poor, please move to a location with better coverage". I am sitting right beside my router...
Here are the relevant specs:
Model number: A500
Build number: Acer_A500_4.010.15_COM_GEN1
Kernel version: 2.6.36.3
If you need any other info in order to help, just let me know.
Thank you very much in advance for any advice!!