I used CM7 for a while, but recently the device stopped booting it only shoes the honeybee icon and resarts.
I the following without success
1. wipe cache
2. factory reset data
3. used CM7 rom and MUIU rom to for update.zip but the update stopss with cache:recovery/log can't mount
Another trial was RSDLITE but the boot loader was shown once and later its shows Failed to initialize ....... failed to flash
the only way I feel would work is to use ADB method to replace the partitions, but need help to know how to do it (sdk and adb tools already installed), what files are required can the CM7 rom has all the img files
Please help in a simple step by step way.
oh that sounds like an interesting problem, such as mine
i never heard of a bootproblem even after wipe ... that's the problem of my defy as well ... look at my post here: http://forum.xda-developers.com/showthread.php?t=1522842
mabe, we have the same problem? would be nice to know, so we can move on together ...
nice greetz
EDIT: i even have a full dump of the unlocked chinese defy ... so if any partition is failed, we could overwrite it with the one of that defy ...
DJ_Synergy said:
oh that sounds like an interesting problem, such as mine
i never heard of a bootproblem even after wipe ... that's the problem of my defy as well ... look at my post here: http://forum.xda-developers.com/showthread.php?t=1522842
mabe, we have the same problem? would be nice to know, so we can move on together ...
nice greetz
EDIT: i even have a full dump of the unlocked chinese defy ... so if any partition is failed, we could overwrite it with the one of that defy ...
Click to expand...
Click to collapse
Thanks DJ_ sunergy
However, I unable to flash the SBF also as it fails in rsdlite. may I have the custom rom with mount recovery issue. How do you use adb to push the recovery img to the phone. I am not able to do that , i dont have these files either. help in reflashin the individual partitions. maybe this will help
i'm not able to do anything on my defy but flashing full-sbf ... cause i don't have any cwm at the defy at the moment, so i have no ability to get ADB-conection ...
so .. please ... leve it at this and do not flash any full-sbf, because it will overwrite cwm and you don't have any adb such as me
with adb ability we should be able to flash your / our defy with a working rom ... that just needs trial and error
EDIT:
ehhm .. let's talk over IRC:
irc.freenode.net
#motodefy
DJ_Synergy said:
i'm not able to do anything on my defy but flashing full-sbf ... cause i don't have any cwm at the defy at the moment, so i have no ability to get ADB-conection ...
so .. please ... leve it at this and do not flash any full-sbf, because it will overwrite cwm and you don't have any adb such as me
with adb ability we should be able to flash your / our defy with a working rom ... that just needs trial and error
EDIT:
ehhm .. let's talk over IRC:
irc.freenode.net
#motodefy
Click to expand...
Click to collapse
Thnks you gave me hope, i d have the CWM working which gives error on mount recovery. But It seems I am not aware on what you suggested as
"with adb ability we should be able to flash your / our defy with a working rom"
could you help me how to use adb and where can i get the necessary image files which mentioned in almost all solutions. confused ho to flash thse boot.img, recovery.img flash partitions etc
hope is allready there, because the defy is nearly unbrickable ... totally bricking the phone is quiet impossible (if you aren't Epsylon3 ) ...
I got the clue now, the recovery running on my defy is 3e and the CWM recovery has gone missing, thats is why is not allowing unsigned roms to even try to mount. If somehow I can get CWm or some other recovery manager to run. I might survice. did you DJ_synergy try this thourgh some tools. do let me know your experience too.
Somebody please help on this issue. How do i get the ADB , recovery image work on this device.
wtf? you didn't have CWM running n your Defy?
Thankfully RSD worked
The RSDlite took me back to stock by using JORDN sbf.
Now trying CWM wiki to get custom recovery installed and will try MUIU on this.
Related
I accidentaly installed the CM9 kernel when i should have installed the CM7 one with ICS. Then i made a nandroid restore of my previous CM7. Than... phone dead. Starting but no CWM no ROM booting.
As i have had CM7 with GB kernel( i think) i flashed ( not knowing) an old SBF than didn't booted. I tried the JORDN_U3_97.21.51 T-Mobile It boots, i can root it, install CWM.
But than when i try to install a CM7 nightly ( installed ok) it dies again. Starts but No CWM no Rom booting.
What to do? I don't know what SBF to flash or what method to install?
Problem update I red that the above SBF has a CG Version 3: SBF 2.51 (Éclair) (Defy) so i installed several CG Version 4: SBF 3.4.2 (Froyo) (Defy).
They don't work. RSD says PASS but phone is dead .No stock recovery no boot. Only way to get it back to life is if i flash the eclair again.
I red that if i get a back screen when booting i have installed a lower CG version. As i tested with version 4, version 5 GB is the only option. I didn't try it out because there are some issues. Froyo would have been much more easier.
i think many readers of your post are getting problems with understanding your problem ...
you got a stock defy, rooted it, installed 2ndinit via apk, booted into recovery (vol- at blue led) and installed CM7 zip ??? correct ???
after succesfull install of CM7 your phone doesn't turn on? Black screen?
black screen after zip is (i think) impossible ... but i can fail ...
i would like to help you, but first you have to give the detailed steps you did and what you wanted to do ...
To make it simplier
I installed the JORDN_U3_97.21.51 T-Mobile (which is 2.1 update1) It boots, i can root it, install 2nd-init > CWM. Set Normal boot.
Than in CWM nothing works.
Installing a CM7 nightly, or restoring a CWM backup.
I install a CM7 nightly like this> In CWM> Custom Recovery> Wipe data, wipe cache> install Cm7 zip, install Gaaps zip. After this, phone restarts, screen is on, logo appears and i wait and wait. Nothing happens.
Do i have to install a special CM7 build?
The CWM backup does not restore. It says that files are missing ( like android.secure..) I am not interested in keeping downgrade ability. i would like to try another SBF. I am not 100% sure what SBF to use from the wiki page.
I red that the SBF i installed has some special "problems" here> http://forum.xda-developers.com/showthread.php?t=905371. They are talking of a CWM revoery app by tenfair here> http://forum.xda-developers.com/showthread.php?t=875233
Maybe that works^. Will try it after the phone is fully charged.
so, ok ... thats detailed as i wish
ok, the problem is clear i think ... first of all eclair is not a nice system for a defy ... upgrade to froyo or even gingerbread ... (keep in mind, that GB has problems with green lens camera) ...
than you can root it with SuperOneClick e.g. ... if this is running correctly, you can install 2ndinit via apk ... then boot, vol- while blue led (i know, you know how ) ... in that clockworkmod recovery you can wipe the devices data and cache partition (even wipe dalvik cache in advanced menu) ... then install CM7.2-nightly-.... .zip ... you may have to flash an fixed sbf with the nessesary kernel for CM7 at this point to boot ...
if this is working fine, you can install the gapps.zip via recovery ...
also try to set boot to 2ndinit in boot-menu ... i don't think it's "normal" boot for CM7 ... but i can't try at the moment cause of my bricked defy ...
Thanks for the reply.
The problem is that i can't install other Froyo SBF's. Will try Gingerbread SBF. The last froyo didn't boot, will try a new one. Weird, i know. Maybe someone can tell me which CM7 to flash? An older one with Kernel ? I didn't think the install would be so tricky.
Froyo Full-SBF doesn't boot on your defy?
be aware of flashing Gingerbread then ... if GB doesn't boot, you will have a problem downgrading to froyo / eclair ...
it sonds crazy, that froyo isn't booting on your device ... have you done a full wipe after froyo sbf? it's important ...
I'm on the Eclair SBF right now. What should i do? Go into recovery and do a wipe or install a new Froyo SBF? It's about the CG value maybe. I understand the mechanism but don't know how to check the CG value. If i search for my current eclair SBF i get all sorts of weird stuff. Nevertheless i will try and try until i succeed. It took me a while to figure out the Rooting method. Superoneclick does not work. It's a special method for the 2.51.
The thing is that i wanted to go the my Nordic SBF( the one Quarx used during the first days of CM7) and it didn't booted. That's why i tried this one. Funny ho flashing the wrong kernel(CM9 instead of CM7) can brake things like this. What i don't understand is how my CWM backup didn't restore. It restored well, finished, then phone dead. No CWM.
edit: i just red: 2.51 is Not downgradable. But no downgrade to what??? Will try to some Froyo SBF's, see if works. But that does not solve my CM7 issues.
Tried a few Froyo SBF's. Wiped data/cache in Stock Recovery. RSD says PASS than phone does not boot. Only the 21.51 eclair works all the time.....Where next?
Update 2 got it to work with this>
http://forum.xda-developers.com/showthread.php?t=1486731&highlight=cg
OMG i dn't understand what was going on with your defy, but i'm happy to know your on the road again
the only sbf that are running are the stock eclair you have (21.51) and the modded BL6 with Froyo Kernel ???
Glad it worked.
DJ_Synergy said:
OMG i dn't understand what was going on with your defy, but i'm happy to know your on the road again
the only sbf that are running are the stock eclair you have (21.51) and the modded BL6 with Froyo Kernel ???
Click to expand...
Click to collapse
Yes but now i am running CM9 flawlessly. So happy. The only thing that bothers me is the Chinese Boot screen )). But that can be changed. It's great that one SBF works, moded or not. I tried like 6,7 other Stock sbf's before. So a message to whom tries to install SBF's: Stay away from JORDN_U3_97.21.51 SBF. Even the Rooting method is awful (until you find it) .
HI Deonix, I have the similar problem. However I am unable to use RSDlite as it gives a failure messg when u click start. I tried JRDNEM_U3_3.4.3-36-1.7.sbf and JRDNEM_U3_2.59.0_CHN_P3_SIGN_SIGNED_UCAJRDNEMARAB1B50AA028.0R_USAJORDANRTINT15_P003_A020_HWp3_Service1FF.sbf.
Both failed, I will try using the rsdlite after the cache and factory rest this time based on your suggestions. Can you tell, if your adb command was listing your device, as mine is not.
my CWM is also gone I get some old android recovery system 3e instead which fails after signature check.
Hi,
I think I know what is your problem.
I also installed the firmware JORDN_U3_97.21.51 and now I can only install any Custom ROM after installing the firmware fix for JORDN_U3_97.21.51.
I did upload it for you: http://www.4shared.com/rar/o02VEk_v/firmware.html?refurl=d1url
It is the following:
Install JORDN_U3_97.21.51;
Rootear;
Install the Recovery;
Install the fix;
enter the recovery and install any rom you want, remembering to delete the caches (data and Dalvik cache)
ps: have 100% of the battery before installing the SBF.
any problems let me know.
Sometimes you could get stuck in a bootloop and all you need to do is pull battery and reboot
Sent from my MB525 using xda premium
Same Problem, Please help!
Deonix said:
Yes but now i am running CM9 flawlessly. So happy. The only thing that bothers me is the Chinese Boot screen )). But that can be changed. It's great that one SBF works, moded or not. I tried like 6,7 other Stock sbf's before. So a message to whom tries to install SBF's: Stay away from JORDN_U3_97.21.51 SBF. Even the Rooting method is awful (until you find it) .
Click to expand...
Click to collapse
Hey bro.
Even i have got the Defy working, but its not detecting the device when connected to the computer, i have done all the basic troubleshooting, is it working for you??
is it bcoz this room is for ME525??
Hi all pls dont hate me im a big fan from this forum :laugh:
E: Format_Volume: make_extf4fs failed on /dev/block/mmcblk0p13
I get this error message when I try to do a factory reset with CWM v5.5.0.4
I was trying to install roms after error message
stock rom 2.2f 2.3g
error message failed update
roms oxygen2.2.2 cm-7.1.0-U8800-Geno-en aurora 4.1
The phone is stuck you can only see the logo of huawei without motion
rom 2:02 aurora
I see the aurora logo that moves but nothing happen
I've tried re-partitioning with Geno (official-partition.zip)
but I think that's the wrong partition there repartitioned and reformatted
I think I need someone who could help me
to get to my data partition run again
pls help me i dont want a new paperweight whit cwm :crying:
sorry for my bad englisch :silly:
SimonAndroid said:
Hi all pls dont hate me im a big fan from this forum :laugh:
E: Format_Volume: make_extf4fs failed on /dev/block/mmcblk0p13
I get this error message when I try to do a factory reset with CWM v5.5.0.4
I was trying to install roms after error message
stock rom 2.2f 2.3g
error message failed update
roms oxygen2.2.2 cm-7.1.0-U8800-Geno-en aurora 4.1
The phone is stuck you can only see the logo of huawei without motion
rom 2:02 aurora
I see the aurora logo that moves but nothing happen
I've tried re-partitioning with Geno (official-partition.zip)
but I think that's the wrong partition there repartitioned and reformatted
I think I need someone who could help me
to get to my data partition run again
pls help me i dont want a new paperweight whit cwm :crying:
sorry for my bad englisch :silly:
Click to expand...
Click to collapse
Well, you need to restore the -pro stock files. Try this link.
ty for your fast reply
Somcom3X said:
Well, you need to restore the -pro stock files. Try this link.
Click to expand...
Click to collapse
I've already tried it whit stock rom 2.2 and 2.3 from huawei page but on end i get error message failed update
before this stock roms works fine
I just think it can not be written to the correct partition
the stock rom can not do that, I realized even before this where I worked with 2 android systems I had to repeatedly use the tools of Geno
to install stock roms
(twosys-partition.zip) for install 2 systems
(offical-partition.zip) for 1 sysem like stock rom 2.3
I think there is something wrong with this partition 0p13
Maybe this would help create a new partition
how can I get access, and I do not know what format
Maybe there is a different solution
I am very grateful for any kind of help with my problem
SimonAndroid said:
I've already tried it whit stock rom 2.2 and 2.3 from huawei page but on end i get error message failed update
before this stock roms works fine
I just think it can not be written to the correct partition
the stock rom can not do that, I realized even before this where I worked with 2 android systems I had to repeatedly use the tools of Geno
to install stock roms
(twosys-partition.zip) for install 2 systems
(offical-partition.zip) for 1 sysem like stock rom 2.3
I think there is something wrong with this partition 0p13
Maybe this would help create a new partition
how can I get access, and I do not know what format
Maybe there is a different solution
I am very grateful for any kind of help with my problem
Click to expand...
Click to collapse
Hi
change your memory card and Try these instructions on this link
http://forum.xda-developers.com/showthread.php?t=1816147
Hi folks,
5 day ago i rootet my tablet 16GB WE and installed Koshu`s CWM step by step like discribed in his threat [http://forum.xda-developers.com/showthread.php?t=1831161]. At the end there was an error message..., i was too quick and made an reboot bevor i could read it.
But i tested if i rooted the tablet succesfully and the superuser-app said that i am root now....
Then i installed the v.0.8.1 Version and everything was fine!
a few days later i got reboots during normal use.
Now i cant boot in the OS, there are bootloops the hole time.
I think that i have not installed the CWM correct...
Any ways to check this with adb commands or something else?
It would be great if someone could help me....
Sorry for my bad english!
Thomas
tpauli said:
Hi folks,
5 day ago i rootet my tablet 16GB WE and installed Koshu`s CWM step by step like discribed in his threat [http://forum.xda-developers.com/showthread.php?t=1831161]. At the end there was an error message..., i was too quick and made an reboot bevor i could read it.
But i tested if i rooted the tablet succesfully and the superuser-app said that i am root now....
Then i installed the v.0.8.1 Version and everything was fine!
a few days later i got reboots during normal use.
Now i cant boot in the OS, there are bootloops the hole time.
I think that i have not installed the CWM correct...
Any ways to check this with adb commands or something else?
It would be great if someone could help me....
Sorry for my bad english!
Thomas
Click to expand...
Click to collapse
You can still boot into CWM? Well you could make a backup of the installed recovery (like shown in the CWM thread) and check if the md5sums are equal to the downloaded image. Btw. linebreaks in the logcat would really help reading it
Koshu said:
You can still boot into CWM? Well you could make a backup of the installed recovery (like shown in the CWM thread) and check if the md5sums are equal to the downloaded image. Btw. linebreaks in the logcat would really help reading it
Click to expand...
Click to collapse
yes i can Boot into CWM, but i cant restore my backup. I tried to install cm10 clean again but after rebooting CWM and booting the OS Android is updating the apps. But i did a full wipe bevor.Thats why i think that the CWM is not in an good state.
i am in the road and maybe i can later check the md5sum.
I can attach an picture from the CWM during trying formating and fixing permissions.
thank you!
Problem solved
tpauli said:
yes i can Boot into CWM, but i cant restore my backup. I tried to install cm10 clean again but after rebooting CWM and booting the OS Android is updating the apps. But i did a full wipe bevor.Thats why i think that the CWM is not in an good state.
i am in the road and maybe i can later check the md5sum.
I can attach an picture from the CWM during trying formating and fixing permissions.
thank you!
Click to expand...
Click to collapse
Koshu helped me! The problem was, that my data partion was read only and my wipes befor and installs was more or less unusefull!
Big thanks to koshu!!!!!
tpauli said:
Koshu helped me! The problem was, that my data partion was read only and my wipes befor and installs was more or less unusefull!
Big thanks to koshu!!!!!
Click to expand...
Click to collapse
Hi. I have the same Problem. Can you tell me how Koshu helped to fix the problem.
the checksum and stuff. thx
florian1985 said:
Hi. I have the same Problem. Can you tell me how Koshu helped to fix the problem.
the checksum and stuff. thx
Click to expand...
Click to collapse
I linked a zip file in the CM10 Thread that formats the data partition: http://forum.xda-developers.com/showthread.php?t=1846044
You can find it in the "addition steps" section. Beware that it will delete all your personal data including the internal sd-card (also nandroid backups if you have stored them on the internal sdcard). So make sure you have EXTERNAL backups if you want to keep some of the data.
I have same problem
After install CM10 ,my TPT cant boot
I turn on My tablet and see loop forever logo : Lenovo ==> CyanogenMod....
Please help me, how to fix it ????
cachlanhuong said:
I have same problem
After install CM10 ,my TPT cant boot
I turn on My tablet and see loop forever logo : Lenovo ==> CyanogenMod....
Please help me, how to fix it ????
Click to expand...
Click to collapse
I have nearly the same problem.
I rooted my TPT a few weeks ago, today I was reading about Cyanogen and decided to install CWM. After some issues with the adb drivers, I managed to install the clockwork recovery.
Now I followed the steps from the cm-thread. I did a nandroid backup and wiped my tablet. After that, I flashed CM10. But all I get is the CyanogenMod logo spinning around.
I tried to go back to my nandroid backup, but it seems broken somehow.
I also tried several several CM-versions and downloaded them several times, without success. But I realised, that the installation procedure of CM was very quick, too quick maybe? Could it be that my clockworkmod isn't installed correctly, because the installation of CM and the nandroid backup won't work.
I hope you guys can help me out. Because I only could find nandroid backups for ROW and US version. I also don´t have adb access anymore.
TPT 16GB 3G WE
Ottilooping said:
I have nearly the same problem.
I rooted my TPT a few weeks ago, today I was reading about Cyanogen and decided to install CWM. After some issues with the adb drivers, I managed to install the clockwork recovery.
Now I followed the steps from the cm-thread. I did a nandroid backup and wiped my tablet. After that, I flashed CM10. But all I get is the CyanogenMod logo spinning around.
I tried to go back to my nandroid backup, but it seems broken somehow.
I also tried several several CM-versions and downloaded them several times, without success. But I realised, that the installation procedure of CM was very quick, too quick maybe? Could it be that my clockworkmod isn't installed correctly, because the installation of CM and the nandroid backup won't work.
I hope you guys can help me out. Because I only could find nandroid backups for ROW and US version. I also don´t have adb access anymore.
TPT 16GB 3G WE
Click to expand...
Click to collapse
Koshu helped me!
I linked a zip file in the CM10 Thread that formats the data partition: http://forum.xda-developers.com/showthread.php?t=1846044
You can find it in the "addition steps" section. Beware that it will delete all your personal data including the internal sd-card (also nandroid backups if you have stored them on the internal sdcard). So make sure you have EXTERNAL backups if you want to keep some of the data.
tpauli said:
Koshu helped me!
I linked a zip file in the CM10 Thread that formats the data partition: http://forum.xda-developers.com/showthread.php?t=1846044
You can find it in the "addition steps" section. Beware that it will delete all your personal data including the internal sd-card (also nandroid backups if you have stored them on the internal sdcard). So make sure you have EXTERNAL backups if you want to keep some of the data.
Click to expand...
Click to collapse
But how can formatting my data partition help? You mean after a format, the installation of cm would work?
And how do I use the .zip, just flashing with cwm?
Ottilooping said:
But how can formatting my data partition help? You mean after a format, the installation of cm would work?
And how do I use the .zip, just flashing with cwm?
Click to expand...
Click to collapse
You have to download the formatdata.zip on your external sd-card.
After that you can boot in the recovery and flash this .please dont juse the cwm! Do you know how to boot into the recovery?
Power on and during that you should drop-down the volume + key a few seconds.
This helped me and others.
Please read in this threat: http://forum.xda-developers.com/showthread.php?t=1831161
tpauli said:
You have to download the formatdata.zip on your external sd-card.
After that you can boot in the recovery and flash this .please dont juse the cwm! Do you know how to boot into the recovery?
Power on and during that you should drop-down the volume + key a few seconds.
This helped me and others.
Please read in this threat: http://forum.xda-developers.com/showthread.php?t=1831161
Click to expand...
Click to collapse
But I have no recovery anymore. The cwm replaced the "normal" recovery.
Ottilooping said:
But I have no recovery anymore. The cwm replaced the "normal" recovery.
Click to expand...
Click to collapse
Send me an photo from your "recovery"...
tpauli said:
Send me an photo from your "recovery"...
Click to expand...
Click to collapse
https://www.dropbox.com/s/xl9fx8rb8bpqgkf/IMG_20130212_110830.jpg
Here is the photo.
I was thinking about 2 possible solutions right now.
1. get another nandroid backup (Problem didnt see any for the 16gb WE version)
2. try no reflash another CWM version or maybe ventana cwm and try again to flash Cyanogen (don't know if its possible to just flash another recovery as an image with the current working recovery)
So what do you guys think?
Ottilooping -
You were running ICS before flashing to CM, right?
da_reeseboy said:
Ottilooping -
You were running ICS before flashing to CM, right?
Click to expand...
Click to collapse
Yes, thats correct.
Ottilooping said:
https://www.dropbox.com/s/xl9fx8rb8bpqgkf/IMG_20130212_110830.jpg
Here is the photo.
I was thinking about 2 possible solutions right now.
1. get another nandroid backup (Problem didnt see any for the 16gb WE version)
2. try no reflash another CWM version or maybe ventana cwm and try again to flash Cyanogen (don't know if its possible to just flash another recovery as an image with the current working recovery)
So what do you guys think?
Click to expand...
Click to collapse
That looks good!
My suggestion: Flash the formatdata.zip and than install the last v0.9.2 from koshu located here: http://forum.xda-developers.com/showthread.php?t=1846044
I was coming from ics too.
Problem solved. CM is running. Thanks for your help, exspecialy to you tpauli.
The formatdata.zip was the key
One last question. I am using the folio keyboard with an european layout (qwertz), but with Cyanogen it is us layout (qwerty). How can I change this?
Hi,
I was using quarx' cm10.1 on my defy plus and it worked quite okay, until I somehow managed to mess up my installation by trying to install moves2sd. Now it won't boot anymore, I'm stuck with the Motorola logo. I can acess the the bootmenu though, but can't acess the costum recovery.
I really don't know how to proceed now. I think the file structure is somehow broken and that it may be enough to reinstall the cm10.1 zip file, but I don't know how to do that without the costum recovery. Is this possible in any way?
Aldimann said:
Hi,
I was using quarx' cm10.1 on my defy plus and it worked quite okay, until I somehow managed to mess up my installation by trying to install moves2sd. Now it won't boot anymore, I'm stuck with the Motorola logo. I can acess the the bootmenu though, but can't acess the costum recovery.
I really don't know how to proceed now. I think the file structure is somehow broken and that it may be enough to reinstall the cm10.1 zip file, but I don't know how to do that without the costum recovery. Is this possible in any way?
Click to expand...
Click to collapse
Not possible. Start from sbf, root, 2ndinit.
Guys
I have a big problem over here. I have S4 I9500
I wiped the entire system by accident usig twrp. Now i cannot boot into anything.
I've downloaded stock rom, but when i try to instal it also via twrp, /system and /preload cannot be mounted.
When i try do wipe again and mout everithing is ok, but when i install the rom again they unmount, and i get a messiage thet the instalation was sucsessfull.
Also tried to push stock firmware with odin, following all kinds of different tutorials, but it wont start.
PLEASE HELP
I can only install custom rom like pac man, but i wanna have the old one back.
Why is this rom installing sucsessfuly and the stock one is not.???
Also tried same thing using CWM but no succsess
VirtualMarko said:
Guys
I have a big problem over here. I have S4 I9500
I wiped the entire system by accident usig twrp. Now i cannot boot into anything.
I've downloaded stock rom, but when i try to instal it also via twrp, /system and /preload cannot be mounted.
When i try do wipe again and mout everithing is ok, but when i install the rom again they unmount, and i get a messiage thet the instalation was sucsessfull.
Also tried to push stock firmware with odin, following all kinds of different tutorials, but it wont start.
PLEASE HELP
I can only install custom rom like pac man, but i wanna have the old one back.
Why is this rom installing sucsessfuly and the stock one is not.???
Also tried same thing using CWM but no succsess
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=2162
A. Putting just "Q" in the subject line isn't going to get you help even if you were in the right forum. You need to put a subject.
B. You are in the wrong forum. The post above links you to the correct place to start.
C. Well, I've got nothing.
Good luck.