Related
Just bought new Atrix phone and unlocked/rooted flashed CM7.
Before flashing CM i backed up stock ROm which came with phone since i kinda liked it so i can use it later on maybe.
I tried to restore it now and in ClockworkRecovery it started to restore it but somewhere in the process it got stuck saying "cannot restore /system" and leave me no choice but to use custom ROM.
What can be the problem and how to solve it?
thanks
There's no way to answer this question accurately without knowing more information about your setup. Like for example what version of cwm are you using, what version of android were you using....
Sent from my MB860 using Tapatalk
purpler said:
Just bought new Atrix phone and unlocked/rooted flashed CM7.
Before flashing CM i backed up stock ROm which came with phone since i kinda liked it so i can use it later on maybe.
I tried to restore it now and in ClockworkRecovery it started to restore it but somewhere in the process it got stuck saying "cannot restore /system" and leave me no choice but to use custom ROM.
What can be the problem and how to solve it?
thanks
Click to expand...
Click to collapse
You can use a Fruit Cake to get stock back.
Phalanx7621 said:
There's no way to answer this question accurately without knowing more information about your setup. Like for example what version of cwm are you using, what version of android were you using....
Click to expand...
Click to collapse
\
Currently i run latest CM7 (2.3.7) for Atrix and latest romracer's CW 5, all latest software.
about about loading a blur type rom? like alien? its essentially the same as stock with some upgrades and changes... maybe look into that as well?
nah, i'd stick with stock for a while..
Can anyone point me to stock flashable SBF for International/Europe devices?
found it, exactly for my wire:
update - - - - - Gingerbread SBF for ATRIX MB860 Vodafone Germany
Android 2.3.4 ---- Blur_Version.45.31.0.MB860.Vodafone.en.EU
1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-31-release-keys-signed-Vodafone-EU.sbf.gz
http://www.filesonic.com/file/37304...OLE-31-release-keys-signed-Vodafone-EU.sbf.gz
Compression MD5 - D9C8B96A9853453DC5A303673FAF56B2
SBF MD5 - BE1204585422871071AC8CAD84FB39A8
Original thread: http://forum.xda-developers.com/archive/index.php/t-1125944.html
Hello everybody...
When i got the pjone i updated to the latest official update (28.12.11), I was having some problems so i downgraded using this tutorial http://forum.xda-developers.com/showthread.php?t=1420728, and than i found out about oxygen rom, and wanted to flash it.
Downloaded the lates version for huawei ideos x5 (2.3.2), wiped cache and flashed it using CWM, but got stuck on the Oxygen logo. I installed 2.2.2 again and than i read here that wiping everything should solve the problem, so i tried again, but this time wiped everything before flashing but this time it didnt even get to the oxygen logo?
Does anyone knows what might be the problem?
Go to official 2.2. Then install oxygen.
Sent from my Derp using XDA Herp
you mean 2.2.1?
cesarib said:
you mean 2.2.1?
Click to expand...
Click to collapse
It dont matter. To the stock rom the phone came with.
Sent from my Derp using XDA Herp
Which recovery are you using? You must use genos 4.0.05 or stockwells 5.0.2.6.
5.0.2.7 from geno and 5.5.0.4 from Blefish wont work with 2.2 because they are made for 2.3
i was using blefish 5.5.0.4, noob mistake i guess. i will try with new recovery.
Use this: http://forum.xda-developers.com/showthread.php?t=1130524 or this http://forum.xda-developers.com/showthread.php?t=1288223&highlight=5+0+2+6 both should work fine
Do you really offer using this oxygen rom to a miui rom user? Are there too many advantages at this rom?
Yann, it worked lile a charm, thank you very much. The rom is running smoothly.
I never used any other custom rom, but comared to the official roms this one is a lot smoother and less buggy.
Im new here, should i close the thread?
Sent from my u8800 using XDA App
only one more question... when i go to systems it says i only have 300 something of ram, shouldnt it be 512?
I think it depends how many apps you have installed in phone memory, move some apps to SD and check if get more ram free.
I think that some RAM is reserved for system and GPU. This is why it only showes 300MB
First of all sorry for the noob question, because I'm really a newbie in this kind of mod.
Ok let's get to the problem. My Ideos X5 is running on Froyo,and wanna upgrade it to official GB stock roms.
After reading and searching in this web, I knew that some users found trouble after flashed it with the stock(can't go to pink screen, can't root, can't instal CWM, and the worst is it bricked their phone etc).
the reason why i'm gonna ugrade to official GB instead of straight to instal custom rom is some rom requirements need my phone to be upgraded into official GB. But then I've found many kinds of stock roms in the web such as B526, B138, B528, B16. since this situatian has turned my will to upgrade my phone, I just wanna know what is the most stable and safest official gingerbread rom for Ideos X5 out there, that won't brick my phone of course.thanks for the responds/advices
best regard
iikbgsdw
It is very difficult to brick your phone, I have to tell you, if it's possible.
I installed dozens of ROMs, some very good, some others plain bad, and my phone still works perfectly.
Today I am using Dzo's excellent ICS Aurora 2.11a which makes my friends envy my phone and has none of the GB bugs.
So, my advice is try some ROMS and find for your self which suits you best.
Thanks a lot lateris....
so what should i do first? instal the official rom first or straight to the custom rom (miui/cyanogenmod etc) cus some recent custom roms require my phone to be upgraded into official.
At the moment, you could try EZET's cyanogen custom rom if still on Froyo. It is cm7.2 based which is gingerbread 2.3.7 and it is very good. Runs fast and is very smooth. AFAIK everything works now, even tethering.
Otherwise you should upgrade to official gingerbread first if you want to get the ICS based roms that are here (like Aurora) or are in the works. I would use b526 as it is the last version to be able to root easily using superoneclick root and then install custom recovery and custom roms.
Most of the phone brickings with the official update happened because of custom partitions being installed and updating using the beta gingerbread release, you should be fine to update safely if your phone is still on official froyo.
that means a lot Mr. Paul....thanks 4 ur advice
PaulMilbank said:
At the moment, you could try EZET's cyanogen custom rom if still on Froyo. It is cm7.2 based which is gingerbread 2.3.7 and it is very good. Runs fast and is very smooth. AFAIK everything works now, even tethering.
Otherwise you should upgrade to official gingerbread first if you want to get the ICS based roms that are here (like Aurora) or are in the works. I would use b526 as it is the last version to be able to root easily using superoneclick root and then install custom recovery and custom roms.
Most of the phone brickings with the official update happened because of custom partitions being installed and updating using the beta gingerbread release, you should be fine to update safely if your phone is still on official froyo.
Click to expand...
Click to collapse
How about B528? is it better than b526 or it's the lattest GB stock rom?
iikbgsdw said:
How about B528? is it better than b526 or it's the lattest GB stock rom?
Click to expand...
Click to collapse
No official roms is stable at 100%
asm19 said:
No official roms is stable at 100%
Click to expand...
Click to collapse
I agree 100% on that, all phone companies makes unstable roms, and custom roms ALWAYS BETTER.
The most stable and battery friendly ROM: http://forum.xda-developers.com/showthread.php?t=1527745
iikbgsdw said:
How about B528? is it better than b526 or it's the lattest GB stock rom?
Click to expand...
Click to collapse
I believe it is difficult to root B528. Of the two, I suggest you use B526
Najnesoog said:
I believe it is difficult to root B528. Of the two, I suggest you use B526
Click to expand...
Click to collapse
It's very easy to root B528. You need B528_root.rar from somewhere in forums. Try search general section.
Sent from my U8800 using Tapatalk 2
thanks a lot 4 ur help guys
Do you need Gingerbread specifically? The Aurora ICS ROM is already stable and there are no major bugs - sometimes the mobile internet connection does not work until the next restart, but this problem already existed on Gingerbread too. Device encryption does not work either.
The ICS ROM one of the fastest ROMs for this device, I see no reason to install an older version on purpose.
Once again the process:
1) Install a official huawei gingerbread ROM, this is done to update the kernel. You need this for the newer ROMs. This is done by putting a update file onto your sd-card (into the dload folder), instructions are provided by huawei.
The first step simply is done to update the kernel, this happens automatically. Be careful though, you want to use a specific file and not the newest version from huawei as this complicates things. If you do not know which file to use I am happy to provide you with a link.
2) Start the phone when the update is finished. Follow the setup, do not configure a wireless connection, google account or anything else. When you are at the homescreen, attach the device to your computer and remove the dload folder, the update is already done. This step is important.
3) Now you install a recovery program that manages your ROMs (make backups, delete ROM, install new ROM etc.). You use this here, instructions are included and should be easy to follow: http://forum.xda-developers.com/showthread.php?t=1377390
4) Try to start the recovery mode and see if you can move up and down with the volume buttons (at the menu). Now you have the updated kernel and a working recovery program, that is all you need.
5) Download the zip-file of the ROM you want to use (I suggested ICS earlier) and copy it onto the sd-card. Within recovery mode you can now select the zip-file (do not extract it!) to install the new ROM. Before you do that, you select to wipe data, cache and under advanced the dalvik cache. This is important.
Now you have to wait quite a while when the phone starts for the first time with the new ROM. Just wait a few minutes and do not interrupt this. You will be greeted with the setup screen of your new ROM and can now configure wireless, google account etc.
XphX
XphX, and how about rooting? Don't you need to root your phone first? (I'm a leek)
You do not need to do that, the ICS Aurora comes pre-rooted and the other custom ROMs come prerooted too - just read their description.
XphX
XphX
1) Install a official huawei gingerbread ROM, this is done to update the kernel. You need this for the newer ROMs. This is done by putting a update file onto your sd-card (into the dload folder), instructions are provided by huawei.
The first step simply is done to update the kernel, this happens automatically. Be careful though, you want to use a specific file and not the newest version from huawei as this complicates things. If you do not know which file to use I am happy to provide you with a link.
Click to expand...
Click to collapse
and yes I do not know which file (official GB Rom) to use, and sure I really need that link...thanks
best regard
Hey
My brother has a Defy, and I have a Defy+. He strongly recomended me to install CM on my Defy+, and after I saw CM7 on his Defy I really grew to like it.
The Problem is, I can't see an official CM support for Defy+:
http://www.cyanogenmod.org/devices/motorola-defy
As the link states: "Official CyanogenMod support is ONLY for the Motorola Defy, NOT the Motorola Defy+. "
So what are my options instead? I'm looking for a good rom, preferably android 3 or 4 that must support Hebrew.
Currently using rooted stock 2.3.6 rom.
Thanks in advance!:victory:
here to you: http://download.cyanogenmod.org/?device=jordan_plus&type=nightly CM7 for Defy+
anyway, good roms are CM9 by Epsylon, Wiui, CM10 by Quarx and Xperia D. look in the development section
I'm about to do this for my Defy+ for the first time too. It's got the latest firmware update pushed out from Motorola (BL7?) so I'm following the gizmolord tutorial for rooting it (not allowed to hyperlink yet) for rooting it. If anyone has the time for checking it for errors I should be aware of I'd be most grateful.
Anyway, my real question for this post is: is CM7.2 for upgrading Defy (not +) and CM7 effectively the same thing for Defy+?
Edit: Another question: how do I back up (save an image of - "nandroid"? my phone before I wipe data/factory reset the phone, which seems to be required before rooting it?
I realise there are CM9's for Defy+ but I reckon I'll wait around for JB+ (10.2?) to get to a stable point before I go with moving away from Gingerbread.
Thanks for any comments/answers in advance.
ricketyclik said:
I'm about to do this for my Defy+ for the first time too. It's got the latest firmware update pushed out from Motorola (BL7?) so I'm following the gizmolord tutorial for rooting it (not allowed to hyperlink yet) for rooting it. If anyone has the time for checking it for errors I should be aware of I'd be most grateful.
Anyway, my real question for this post is: is CM7.2 for upgrading Defy (not +) and CM7 effectively the same thing for Defy+?
Edit: Another question: how do I back up (save an image of - "nandroid"? my phone before I wipe data/factory reset the phone, which seems to be required before rooting it?
I realise there are CM9's for Defy+ but I reckon I'll wait around for JB+ (10.2?) to get to a stable point before I go with moving away from Gingerbread.
Thanks for any comments/answers in advance.
Click to expand...
Click to collapse
Firstly if gizomolord's tutorial is a program that roots the device for you, don't use it, because BL7 devices (I'm fairly sure yours would be) need to be rooted manually. You can follow the instructions in my signature under 'Status' for the files and instructions needed to root your device.
Secondly, I'm not quite sure what you mean in your first question. CM7 is Gingerbread and CM7.2 would just be a 'more up-to-date' version.
About the nandroid, from what I know you can only perform a nandroid after rooting your device. As for preparing to root there are a few things I did:
You can back up your SMS and Call Logs using programs from the Google Play Store. During rooting, your sdcard will be safe and so you can back most thing onto it.
You can back up your contacts to Google.
You can remember what apps to download from the Google Play Store once you have rooted.
That's all I did. There may be a way to backup but nandroid backs-up your current ROM which means you need root to be able to do so.
I hope that helps you! And if you need any help with rooting don't be afraid to ask (plus I wrote instructions and added files to my spare DropBox which you can find in my signature)
z3ro-grav1ty said:
Firstly if gizomolord's tutorial is a program that roots the device for you, don't use it, because BL7 devices (I'm fairly sure yours would be) need to be rooted manually. You can follow the instructions in my signature under 'Status' for the files and instructions needed to root your device.
Secondly, I'm not quite sure what you mean in your first question. CM7 is Gingerbread and CM7.2 would just be a 'more up-to-date' version.
About the nandroid, from what I know you can only perform a nandroid after rooting your device. As for preparing to root there are a few things I did:
You can back up your SMS and Call Logs using programs from the Google Play Store. During rooting, your sdcard will be safe and so you can back most thing onto it.
You can back up your contacts to Google.
You can remember what apps to download from the Google Play Store once you have rooted.
That's all I did. There may be a way to backup but nandroid backs-up your current ROM which means you need root to be able to do so.
I hope that helps you! And if you need any help with rooting don't be afraid to ask (plus I wrote instructions and added files to my spare DropBox which you can find in my signature)
Click to expand...
Click to collapse
Thanks very much for that z3ro. I did use your tutorial in the end (gizmodo's was similar, but less detailed) but since I'd downloaded their sbf's I used those. I also did the sms and call log backing up. There is, as far as I can tell, no way to make a backup of a rom of a device that isn't rooted, so I just gave up on that idea and stepped into the void. It all worked a treat. I'm feeling so confident now I think I might try Jelly Bean
ricketyclik said:
Thanks very much for that z3ro. I did use your tutorial in the end (gizmodo's was similar, but less detailed) but since I'd downloaded their sbf's I used those. I also did the sms and call log backing up. There is, as far as I can tell, no way to make a backup of a rom of a device that isn't rooted, so I just gave up on that idea and stepped into the void. It all worked a treat. I'm feeling so confident now I think I might try Jelly Bean
Click to expand...
Click to collapse
Good for you mate If you need any further help, don't hesitate to ask
pochopsp said:
here to you: http://download.cyanogenmod.org/?device=jordan_plus&type=nightly CM7 for Defy+
anyway, good roms are CM9 by Epsylon, Wiui, CM10 by Quarx and Xperia D. look in the development section
Click to expand...
Click to collapse
Hmmm, they are all good looking, I'll try the CM7 first and then decide what's next.
Thank you so much for this
How do I install? Usual cleaning & wiping in Recover Mode, then "install from zip file" option, wipe again and done?
ricketyclik said:
Thanks very much for that z3ro. I did use your tutorial in the end (gizmodo's was similar, but less detailed) but since I'd downloaded their sbf's I used those. I also did the sms and call log backing up. There is, as far as I can tell, no way to make a backup of a rom of a device that isn't rooted, so I just gave up on that idea and stepped into the void. It all worked a treat. I'm feeling so confident now I think I might try Jelly Bean
Click to expand...
Click to collapse
Good to know you found your answers
z3ro-grav1ty said:
Good for you mate If you need any further help, don't hesitate to ask
Click to expand...
Click to collapse
Thank you for helping the other guy !
TheBirdOfHermes said:
Hmmm, they are all good looking, I'll try the CM7 first and then decide what's next.
Thank you so much for this
How do I install? Usual cleaning & wiping in Recover Mode, then "install from zip file" option, wipe again and done?
Click to expand...
Click to collapse
wipe data, chache and dalvik chache, flash cm7, flash gapps, reboot
z3ro-grav1ty said:
Good for you mate If you need any further help, don't hesitate to ask
Click to expand...
Click to collapse
Thanks z3ro. Here's one for you: I've got Quarx's CM7.2 running, after trying CM7, and both go through battery much faster than stock Motorola - which had a nice battery saver setting, not available in the CM's.
I've read that this is as much about which kernel you're using as anything. So:
Can I flash a new SBF without flashing a new ROM? If so, is it advisable? and
I can't figure out how to do a nandroid backup. I've got 2nd init installed, but cant see the option anywhere in its menu. Does a nandroid backup back up just the ROM and settings, or those plus the SBF?
ricketyclik said:
Thanks z3ro. Here's one for you: I've got Quarx's CM7.2 running, after trying CM7, and both go through battery much faster than stock Motorola - which had a nice battery saver setting, not available in the CM's.
I've read that this is as much about which kernel you're using as anything. So:
Can I flash a new SBF without flashing a new ROM? If so, is it advisable? and
I can't figure out how to do a nandroid backup. I've got 2nd init installed, but cant see the option anywhere in its menu. Does a nandroid backup back up just the ROM and settings, or those plus the SBF?
Click to expand...
Click to collapse
Ok firstly I'll answer about nandroid backup. Once you have 2ndInit install, you'll encounter a blue led on bootup. If you press Volume Down then you'll be taken to the bootmenu screen. From there select recovery and then custom recovery. You'll now see the CWM recovery screen. Now select backups and restore and this is where you can make your nandroid backup. Select backup all and let it finish.
As for battery drainage, I've been using CM10 with now problems at all. In fact my current configuration Quarx's CM10 (17/02 build) and JellyX Kernel (22/03) has been exceptionally good! Very stable, just may take a few tries (as in a couple of flashing attempts) to get it to boot up
Now with sbf's you should really note that there is a stock SBF (which you can locate a list of in the Development section) and if you own a Defy+ there are some sbf's needed to root your phone.
As far as ROM's are concerned, to change from one ROM to another you need to perform a full wipe (data/cache/dalvik) then you flash the ROM and gapps and the another cach and dalvik wipe and then reboot your device.
I'm not entirely sure what you mean by flashing a new sbf without flashing a new ROM. All I can say is: you use the stock SBF to restore everything (unroot + go back to stock android version) or it is used, as I said, to help root the Defy+. ROM's do not require the flashing of a new sbf. Kernel's don't require you to flash a new sbf either, however it is suggested to reflash (or just flash) the ROM that you want to use.
------I'll link something here in a bit-------
EDIT: Here! <--- just a general flash procedure if you need
If you encounter any problems along the way, restore to stock SBF, re-root, install 2ndInit, and flash again.
Hopefully that answers most things
z3ro-grav1ty said:
Ok firstly I'll answer about nandroid backup. Once you have 2ndInit install, you'll encounter a blue led on bootup. If you press Volume Down then you'll be taken to the bootmenu screen. From there select recovery and then custom recovery. You'll now see the CWM recovery screen. Now select backups and restore and this is where you can make your nandroid backup. Select backup all and let it finish.
As for battery drainage, I've been using CM10 with now problems at all. In fact my current configuration Quarx's CM10 (17/02 build) and JellyX Kernel (22/03) has been exceptionally good! Very stable, just may take a few tries (as in a couple of flashing attempts) to get it to boot up
Now with sbf's you should really note that there is a stock SBF (which you can locate a list of in the Development section) and if you own a Defy+ there are some sbf's needed to root your phone.
As far as ROM's are concerned, to change from one ROM to another you need to perform a full wipe (data/cache/dalvik) then you flash the ROM and gapps and the another cach and dalvik wipe and then reboot your device.
I'm not entirely sure what you mean by flashing a new sbf without flashing a new ROM. All I can say is: you use the stock SBF to restore everything (unroot + go back to stock android version) or it is used, as I said, to help root the Defy+. ROM's do not require the flashing of a new sbf. Kernel's don't require you to flash a new sbf either, however it is suggested to reflash (or just flash) the ROM that you want to use.
------I'll link something here in a bit-------
EDIT: Here! <--- just a general flash procedure if you need
If you encounter any problems along the way, restore to stock SBF, re-root, install 2ndInit, and flash again.
Hopefully that answers most things
Click to expand...
Click to collapse
Thanks z3ro. On reading this I realize I'm confusing SBF's with kernels. An SBF is kernel + ROM? If so, when I flashed to CM7.2 I flashed kernel as well? Quarx's instructions say flash Froyo (which I didn't do, having a Defy+) then install the ROM.
BTW, my phone's rooted, hence having CM7.2 loaded.
ricketyclik said:
Thanks z3ro. On reading this I realize I'm confusing SBF's with kernels. An SBF is kernel + ROM? If so, when I flashed to CM7.2 I flashed kernel as well? Quarx's instructions say flash Froyo (which I didn't do, having a Defy+) then install the ROM.
BTW, my phone's rooted, hence having CM7.2 loaded.
Click to expand...
Click to collapse
Yeah I had a feeling you confused the two. Well an sbf (I guess) is a kernel+ROM. Ok having a defy+ makes things a lot easier because that's the model I have as well.
Quarx's nightlies come with their own kernel so when you flash them, the install the kernel. (Go into phone settings > scroll down to the bottom and click on about phone > check to see if kernel version is there, it should be the same as your current ROM)
Then again, I went straight to CM10, but I'm fairly sure CM7 should be the same.
Well since you are rooted, I just recommend performing a nandroid backup, then flashing whatever ROM (and Kernel if you want) you feel comfortable with.
I recommend Quarx's 18/03 build for CM10 (before his experimental wi-fi builds), ParanoidAndroid 2.5.3 (however there hasn't been much activity of late), and the combination I mentioned earlier of Quarx's 17/02 and JellyX 22/03.
TheBirdOfHermes said:
Hey
My brother has a Defy, and I have a Defy+. He strongly recomended me to install CM on my Defy+, and after I saw CM7 on his Defy I really grew to like it.
The Problem is, I can't see an official CM support for Defy+:
http://www.cyanogenmod.org/devices/motorola-defy
As the link states: "Official CyanogenMod support is ONLY for the Motorola Defy, NOT the Motorola Defy+. "
So what are my options instead? I'm looking for a good rom, preferably android 3 or 4 that must support Hebrew.
Currently using rooted stock 2.3.6 rom.
Thanks in advance!:victory:
Click to expand...
Click to collapse
leave cm7 n flash your phone with cm10 on any of the links provided here
http://forum.xda-developers.com/showthread.php?t=1768702
choose the latest one maybe around march24th build. its perfectly stable.
press thanks if helped.
my device:>>> Motorola defy plus(running on cm10.1 by quarx)
z3ro-grav1ty said:
I recommend Quarx's 18/03 build for CM10 (before his experimental wi-fi builds)
Click to expand...
Click to collapse
This. I love it! No more radical battery drain, and seems really stable. Nice clean UI too
I was expecting JB to be a pain to learn, but on the face of it it seems to be quite similar to GB, at least in UI terms.
ricketyclik said:
This. I love it! No more radical battery drain, and seems really stable. Nice clean UI too
I was expecting JB to be a pain to learn, but on the face of it it seems to be quite similar to GB, at least in UI terms.
Click to expand...
Click to collapse
I'm glad you fixed your wi-fi drain, it seems that problem is quite evident in CM7 builds
z3ro-grav1ty said:
I'm glad you fixed your wi-fi drain, it seems that problem is quite evident in CM7 builds
Click to expand...
Click to collapse
I don't think it was related to wifi. I hardly ever have it on.
ricketyclik said:
I don't think it was related to wifi. I hardly ever have it on.
Click to expand...
Click to collapse
sorry I meant battery not wi-fi
I want to install too
shubhu2604 said:
leave cm7 n flash your phone with cm10 on any of the links provided here
http://forum.xda-developers.com/showthread.php?t=1768702
choose the latest one maybe around march24th build. its perfectly stable.
press thanks if helped.
my device:>>> Motorola defy plus(running on cm10.1 by quarx)
Click to expand...
Click to collapse
Hey Bro,
I want to install CM10.1 too....but i am confused which link to download and each link shows multiple file. Also if i install CM10.1 how much my internal memory will decrease? Since originally we are having 1.2Gb in DEfy +. What are the things that not working in the version that you installed??
Thanks in advance.
jountha said:
Hey Bro,
I want to install CM10.1 too....but i am confused which link to download and each link shows multiple file. Also if i install CM10.1 how much my internal memory will decrease? Since originally we are having 1.2Gb in DEfy +. What are the things that not working in the version that you installed??
Thanks in advance.
Click to expand...
Click to collapse
Go for CM10, I would not suggest CM10.1 for you yet. The multiple download link each have a date - correspond each date to the changelog on Quarx's thread and choose a stable one (NOT and experimental build) - I suggest 18/03 for you because you don't seem too familiar yet.
z3ro-grav1ty said:
Go for CM10, I would not suggest CM10.1 for you yet. The multiple download link each have a date - correspond each date to the changelog on Quarx's thread and choose a stable one (NOT and experimental build) - I suggest 18/03 for you because you don't seem too familiar yet.
Click to expand...
Click to collapse
does cm10 quarx 18/03 has major bug? eg: battery drain,connectivity problem etc..
currently on cm7.2. wish to upgrade to cm10..
Just recently flashed a friend's phone with Energy Rom. The rom looks amazing and is very well designed. There are just a few issues that he is having and I have not seen anyone else experience these problems in the tread. (Too few posts to post there)
Her camera is not working and I guess her Hotspot gave her a "timed out" message. . . . If anyone else has experienced this, please let me know if you were able to resolve this and how.
Thanks!
marcusw3 said:
Just recently flashed a friend's phone with Energy Rom. The rom looks amazing and is very well designed. There are just a few issues that he is having and I have not seen anyone else experience these problems in the tread. (Too few posts to post there)
Her camera is not working and I guess her Hotspot gave her a "timed out" message. . . . If anyone else has experienced this, please let me know if you were able to resolve this and how.
Thanks!
Click to expand...
Click to collapse
Are you on the 4.1.2 update? If so you will need to flash back down to 4.1.1 kernel because the new kernel is not compatible with the 4.1.1 camera
Sent from my XT907 using Tapatalk 2
marcusw3 said:
Just recently flashed a friend's phone with Energy Rom. The rom looks amazing and is very well designed. There are just a few issues that he is having and I have not seen anyone else experience these problems in the tread. (Too few posts to post there)
Her camera is not working and I guess her Hotspot gave her a "timed out" message. . . . If anyone else has experienced this, please let me know if you were able to resolve this and how.
Thanks!
Click to expand...
Click to collapse
Energy ROM is based off of the the 4.1.1 build, the latest update has the XT907 at 4.1.2. So if her phone was previously on 4.1.2, then flashing this ROM could cause problems as the previous poster mentioned due to the new kernel. Not sure if the developer will update his ROM any time soon (which I loved by the way, and keep checking his thread for any updates),
also, Energy ROM can only be installed via SS right now, and given that the bootloader has been unlocked, I believe that all ROMs will be flashable via TWRP/CWM going forward - thus making SS obsolete for the XT907.
Here's what I suggest though:
unlock bootloader
install TWRP recovery
try out the DeadRage ROM, which is based on the 4.1.2 build: http://www.droidrzr.com/index.php/topic/17778-romretail-deadrage-v12a-05092013-412-base/
if you really want to stick with Energy ROM with working camera, then you still can:
flash back to stock (4.1.1)
root
install SS
unlock bootloader
install TWRP
install Energy ROM on Slot 1
backup Energy ROM via SS
move Energy ROM to stock slot via SS
backup Energy ROM via TWRP (basically making a nandroid, and this can be installed going forward as a backup)
uninstall SS
Thanks!
jco23 said:
Energy ROM is based off of the the 4.1.1 build, the latest update has the XT907 at 4.1.2. So if her phone was previously on 4.1.2, then flashing this ROM could cause problems as the previous poster mentioned due to the new kernel. Not sure if the developer will update his ROM any time soon (which I loved by the way, and keep checking his thread for any updates),
also, Energy ROM can only be installed via SS right now, and given that the bootloader has been unlocked, I believe that all ROMs will be flashable via TWRP/CWM going forward - thus making SS obsolete for the XT907.
Here's what I suggest though:
unlock bootloader
install TWRP recovery
try out the DeadRage ROM, which is based on the 4.1.2 build:
if you really want to stick with Energy ROM with working camera, then you still can:
flash back to stock (4.1.1)
root
install SS
unlock bootloader
install TWRP
install Energy ROM on Slot 1
backup Energy ROM via SS
move Energy ROM to stock slot via SS
backup Energy ROM via TWRP (basically making a nandroid, and this can be installed going forward as a backup)
uninstall SS
Click to expand...
Click to collapse
I will give the first suggestion a reply, if that does not work, the second. I will keep you all posted on results. Thank you!
Kernel?
Any clue of where I can find just the kernel I need to download and flash?
Sorry for coming across as a newbie, but I am used to other phones that have a bit larger of a community. Thanks again.
marcusw3 said:
Any clue of where I can find just the kernel I need to download and flash?
Sorry for coming across as a newbie, but I am used to other phones that have a bit larger of a community. Thanks again.
Click to expand...
Click to collapse
no worries - we all were newbies at some point in time.
I have not seen a thread dedicated to the stock 4.1.1 kernel, but I did find this:
http://forum.xda-developers.com/showthread.php?t=2017200
my advice at this point is to backup your apps/data via TiBu (and then copy that backup folder to your mnt/external1 directory).
so that way, after you pick your ROM, you can re-download your apps from the market (I always recommend doing this as opposed to letting TiBu restore them), then you can use TiBu to restore data ONLY from your apps. I do NOT recommend restore system data though when switching ROMs (however, I do restore WiFi settings and bluetooth pairings).
hope this helps.
All worked out great! I appreciate the help. I ended going with Energy 4.1.1 I have that stupid grateful dead image stuck on first power up due to rage. -Annoying!!
marcusw3 said:
All worked out great! I appreciate the help. I ended going with Energy 4.1.1 I have that stupid grateful dead image stuck on first power up due to rage. -Annoying!!
Click to expand...
Click to collapse
anytime - see this thread regarding the boot logo:
http://www.droidrzr.com/index.php/topic/17708-boot-logos-request-for-custom-one-here/