So i bricked my phone trying to deodex with 928 method as shown in the below steps.
B. DEODEXING:
1. Now that your phone is rooted, you can now download and install clockworkmod’s “Droid X Recovery Bootstrap” app in the app market. Do not use this program after installing just yet! There are a few more steps!
2. Download but DO NOT UNZIP 928’s BlackGlass Theme here: 928Droid Themes for the Droid X This program will automatically Deodex your Droid X and install the custom BlackGlass Theme. There is another option to manually deodex your phone but that’s a far more complicated option compared to this alternative.
3. Place your DROID X into “USB Mass Storage” mode (originally it was PC MODE but now we need to switch to USB Mass storage in order to access the SD Card storage).
4. Drag and drop the zipped 928 BlackGlass onto your sdcard. You can make a separate folder for this on your SD Card labeled “custom themes/roms” and place the file there. You will later access this file through Bootstrap Recovery in order to install the custom ROM/Theme (or any other ROM or theme hereinafter).
5. Open the Bootstrap app in your app drawer and press “Bootstrap Recovery”. Click “Allow” if the Superuser Permissions window pops up. Make sure to do this step before rebooting. Some users have been having issues with the phone not rebooting into recovery and it's usually because they skipped this step
6. Press “Reboot Recovery” and your phone will reboot into recovery mode.
7. Allow the recovery mod to boot (it will take less than a minute after the Motorola logo pops up). You should see a series of options in green font.
8. Use volume up/volume down buttons on the phone to control scrolling and use the red camera button to select a particular option. Use the phone’s back function (second button from right on front of phone) to move back to previous screen options. Scroll down to “Backup and restore” and backup your current stock froyo. This process takes a very long time so be patient with it. I recommend that you Backup the first time you try modifying your phone in any way because if you brick, you're going to lose everything! I’m personally skipping this step because I’ve done it before and the backup process takes a very long time.
9. Select “install zip from sdcard”
10. Select “choose zip from sdcard” and find “928DroidBlackGlassX-DroidX-OTA2315-DeOdexEERR-THEME.ZIP”
11. Confirm the install by scrolling down to “Yes-Install 928DroidBlackGlassX-DroidX-OTA2315-DeOdexEERR-THEME.ZIP”
12. If you’re watching the install process you will see various commands running such as “removing odex files” etc. etc.
13. Go back to the main screen and select “reboot system now” and wait for the phone to reboot. That’s it! Your Droid X is now fully deodexed and you have 928’s BlackGlass Theme installed!
14. You can go download “ROM Manager” from the app market and go download more custom ROMs or themes but make sure to only dl and install DEODEXED ROMs!!! If you install a ROM that is not compatible with a deodexed phone your Droid X will brick!
15. If you want to download and install different ROMs and Themes you can do this by following steps 2 through 11.
I was running 2.2.1 root. RSDLite keeps erroring out while trying to SBF
What error are you getting with rsd lite?
Sent from my DROIDX using XDA App
I was getting a error about downloading ram from the bootloader or something of the sort. I Finally got it to go through, then i tried the manual deodex method and it errored out on the SyncML.odex file. THen i realized there wasnt root anymore, or bootstrapper. I guess the SBF wipes that stuff out? So i re rooted, got recovery reinstalled. And im restoring my backup i did. I figure after the backup is up and running ill try the manual deodex again.
This guide shows you how to root and install a ROM.
I am NOT responsible for bricked devices or dead sd cards etc.
Hi,
Today i'm going to show you how to root and update your Galaxy S.
In this guide we flash custom kernel and rom.
But first, remember the drivers http://www.filefactory.com/file/3nhyqmo40111/n/SAMSUNG_USB_Driver_for_Mobile_Phones.zip
Now the rooting part.
1.Download Semaphore kernel http://semaphore.gr/downloads Choose the first one. (Semaphore_2.7.4.tar)
2. It may look like a zip file but it is not. So do not extract the tar file.
3. Open Odin (if you don't have it download it from http://ul.to/o2xcp01n )
4. Switch off the phone and wait for vibration. When it vibrates it is completely off
5. Make sure you have drivers.
6. Put your phone to download download mode. To do that press vol down + home + power.
7. Now your phone should be in download mode. Plug it to computer (make sure odin is still open)
8. Click PDA tab and choose Semaphore_2.7.4.tar.
9. Click start
10. Wait
11. Wait more and then there should read Success! in odin
12. Now you can disconnect the phone.
13. Finish!
Now we are ready to install a custom ROM!
First you need to download a ROM. I recommend Cyanogenmod because it is popular, it has many features and it is stable. Here's the link http://download.cyanogenmod.org/get/jenkins/49867/cm-10.2.0-galaxysmtd.zip
1. Download the ROM.
2. Put it to your phone's internal sd-card
3. Download gapps http://goo.im/gapps/gapps-jb-20130813-signed.zip
4. Put it to your phone's sd-card
5. Reboot to recovery (vol up + home + power)
6. Wipe data/factory reset
7. Wipe cache
8. Advanced > wipe dalvik cache
9. Install zip from sd-card
10. Choose zip from sd-card
11. Select cm-10.2.0-galaxysmtd.zip
12. Confirm
13. Wait
14. Wait more
15. Wait even more
16. Go back
17. Don't reboot
18. Install zip from sd-card
19. Choose zip from sd-card
20. Choose gapps-jb-20130813-signed.zip
21. Confirm
22. Wait
23. Reboot
Now it's ready! You made it! You rooted and updated your phone. Be proud!
This is not correct guide.
Why?
monkeywithbanana said:
This guide shows you how to root and install a ROM.
I am NOT responsible for bricked devices or dead sd cards etc.
Hi,
Today i'm going to show you how to root and update your Galaxy S.
In this guide we flash custom kernel and rom.
First you need to be sure that you have 2.3.6 XXJW4.
You can check it by going to settings > about phone > and there's baseband version.
If you have JW4 you can skip to rooting part.
If you don't have JW4, you need to flash it.
Installing JW4
1. You need the drivers. For 32 bit(x86) Windows http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml and for 64 bit(x64) Windows
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
2.Download the firmware http://www.hotfile.com/dl/150483619/708026d/I9000XXJW4_I9000OXAJW4_XEU.zip.html
3. Then you need extract the downloaded file I9000XXJW4_I9000OXAJW4_XEU.zip (from step 2) to any folder, you will get these 2 files:
JW4_JW4_JW4.tar
SS_DL.dll (ignore this file)
4. Download Odin which we will be using to flash XXJW4 on the phone. http://www.mediafire.com/download.php?06v1nznuk3ng7gw
5. Disconnect your phone if it’s connected to PC. Then switch it off. Wait 5-6 seconds for vibration to confirm complete switch off.
6. Boot into recovery. To do this, press and hold the Volume_UP + Home + Power till the screen turns on, then let them go. You will boot into recovery soon enough.
7. Then, use the volume keys to navigate and the home/power key to select options, select wipe data/factory reset, then select Yes on next screen to confirm. After the data wipe is complete, remove and re-insert the battery, but don’t power it back on.
8. Put the Galaxy S in Download Mode. To do that press and hold these keys together: Volume down + Home + Power until a screen saying Download Mode comes up.
9. Open Odin (downloaded in step 4) — Odin3 v1.7.exe.
10. Connect your phone to PC now. You should get the message “Added!!” under Odin’s message box in the bottom left. If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed.
11. Now, in Odin, click the PDA Tab, and select the file JW4_JW4_JW4.tar
12. Important! Do not touch any other button or make any other changes in Odin except selecting the required file as given in step 11.
13. Now, hit the START button to begin the flashing process. When it finishes, your phone will automatically reboot, upon which you can unplug the cable. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin.
IMPORTANT Note: If ODIN gets stuck at some stage and doesn’t seem to be doing anything, do this — disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 9. Same if you get a FAIL message in Odin.
14. Finish!
Now the rooting part.
1.Download CF-Root http://download.chainfire.eu/155/CF-Root/SGS/CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip
2. Unzip the file and you get a tar file. It may look like a zip file but it is not. So do not extract the tar file.
3. Open Odin (if you don't have it download it from section 4 in installing part)
4. Switch off the phone and wait for vibration. When it vibrates it is completely off
5. Make sure you have drivers (JW4 installing section 1)
6. Put your phone to download download mode. To do that press vol down + home + power.
7. Now your phone should be in download mode. Plug it to computer (make sure odin is still open)
8. Click PDA tab and choose CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.tar.
9. Click start
10. Wait
11. Wait more and then there should read Success! in odin
12. Now you can disconnect the phone.
13. Finish!
Now we are ready to install a custom ROM!
First you need to download a ROM. I recommend Cyanogenmod because it is popular, it has many features and it is stable. Here is link http://get.cm/get/3qH
1. Download the ROM.
2. Put it to your phone's internal sd-card
3. Download gapps http://goo.im/gapps/gapps-ics-20120429-signed.zip
4. Put it to your phone's sd-card
5. Reboot to recovery (vol up + home + power)
6. Wipe data/factory reset
7. Wipe cache
8. Advanced > wipe dalvik cache
9. Install zip from sd-card
10. Choose zip from sd-card
11. Select cm-9.0.0-galaxysmtd.zip
12. Confirm
13. Wait
14. Wait more
15. Wait even more
16. Go back
17. Don't reboot
18. Install zip from sd-card
19. Choose zip from sd-card
20. Choose gapps-ics-20120429-signed.zip
21. Confirm
22. Wait
23. Reboot
Now it's ready! You made it! You rooted and updated your phone. Be proud!
Click to expand...
Click to collapse
here are the reason:
1. While installing jw4 in step 6 you have ask to boot in recovery and recovery only available when you have flashed a kernel which supports it.
2. If i already have recovery them why i should flash jw4 again and then again root it and flash the ics.
3. You have asked to put rom in internal sdcard and gapps in sdacrd... they should both be in same card else a new user might get confuse.
4. You haven't mention if user ends in bootloop what should he do?
I think this guide is just fine , go make your one if there's a problem^. Good job OP.
Sent from my GT-I9000 using xda premium
I meant to write internal sd card for gapps and my sgs had stock recovery without root.
Have you ever heard about android stock recovery 3e?
And i forgot to write what to do if bootloop And fortunately nobody asked what to do if bootloop and if someone asks, i'll reply and explain what to do.
monkeywithbanana said:
I meant to write internal sd card for gapps and my sgs had stock recovery without root
Click to expand...
Click to collapse
Is it... i haven't heard like this ever.
bakcup /efs
I didn't acutally read the whole thing so I don't know wether it's corret or not, but I think you should definitly advise the user to backup the /efs folder to prevent issues with IMEI/baseband.
(searched your guide for /efs and didn't find it anywhere)
Greets.
AlwaysDroid said:
I think this guide is just fine , go make your one if there's a problem^. Good job OP.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I can create my own guide however did not want to have one more thread on the thing which is already there a lots of time rather than I will spread the already present guides.
boot loop
Hi,
I followed the entire guide and after getting and "Encryption Unsuccessful" -> Reset to Factory, I got a boot loop.
Any ideas on how I could fix this?
Thanks for the guide
Nash
--
UPDATE: Fixed the boot loop but still don't know why it happened. Can you shed a light? Still on 2.3
Thanks!
Nash
Were you flashing the Rom or gapps before getting the encryption error? It's possible that the zip files are corrupted or they have some errors. Try to redownload the files.
Thanks for your reply, but i want to know if that works with my phones stock rom
CF-Root is is available for almost every Samsung SGS stock rom(maybe for every stock rom) so you just need to tell me your baseband and i'll give instructions to do that for your ROM.
What if I still have Froyo installed? Where can I find instructions to upgrade to Gingerbread?
See the ''installing JW4'' section
monkeywithbanana said:
And i forgot to write what to do if bootloop And fortunately nobody asked what to do if bootloop and if someone asks, i'll reply and explain what to do.
Click to expand...
Click to collapse
I have this exact problem...I have followed the instructions to the T, Now my phone is just "bootlooping". Please can you tell me what to do?
Thanks in advance
Factory reset and try flashing again.
Uhh why don't you just suggest an odin flash of Darky's rom, then a CWM flash of CM9 then CM10. That would be a lot quicker and easier to read and explain.
it's a good guide, thanks
Hiieeexx...
I am a newbie here...
I managed to root my device and want to experience Jellybean..can the following file(link for pacman nightly) be used with the steps below???
pac_edison-nightly-20131223.zip (m not allowed to post links, but it is from pacman basketbuild)
Steps:
1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
2. Disconnect USB and then turn off your Motorola Atrix 2.
3. Now, boot into recovery mode. To do so, press and hold Volume Down & Power until you see the text "Fastboot" appear in the top left in corner of the screen. Then use the volume down button to scroll through all the options until you reach "Android Recovery". Pressing the volume up button will select the option. You should now see the famous Android Triangle Exclamation screen. Tap the bottom right hand corner of the screen, just above the search key and that should bring you into the main menu of the system recovery. In recovery use Volume buttons to navigate through options and Power button to select an option.
4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the pac_edison-nightly-20131109.zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
7. Once the ROM installation process end, repeat the step 6 but choose the gapps-jb-20130813-signed.zip file instead of ROM zip to install the Google apps package.
8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Motorola Atrix 2 and boot up into customized Android 4.3.1 Jelly Bean ROM PAC-man. The first boot will take time, so be patient!
9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.
And next thing i wanted to ask is that since it's a custom version, how they are different from original one, and does it allow updates from playstore?
please help....
Yes the installation of the nightly is the same as the description above if you are currently on a stock or other ROM.
Check out the ROM features in the Feature Development forum.
If you flash the full gapps package, all PlayStore features will work as normal
i have one mytouch 4g with s-off and android 2.2.1 with root and CWM recovery.
i want to install ICS on this but not sure how to proceed as i am really confused by reading all threads . so DEVs kindly help me to install ICS step by step.
thanks
Put a ICS rom onto your sd card. Then flash it.
Broken down version:
1) download an ICS ROM zip file (I recommend SteppNasty Aospx - link in the 'resource bible')
2) put that zip file (don't extract) on the root of your sd card (i.e. not in any folders)
3) reboot your phone into recovery (either adb reboot recovery or power off > battery pull > battery insert > hold volume down button + power > select 'recovery', press power button
4) using CWM recovery, do a factory reset/wipe data, then I think under advanced select 'wipe cache' and 'wipe dalvik' (I don't have CWM anymore). If you like, you can also wipe battery stats, but I'm not sure it does anything.
5) select 'install from zip', and choose your ROM zip file
6) either flash a gapps (google apps) zip file if the ROM thread says it needs it, or reboot if it already includes google apps (most don't). Sometimes (like I think with Stepp Aospx), its actually better to reboot after flashing the rom, then go back to recovery and wipe dalvik & cache and flash gapps after getting through an initial boot. Most rom threads will have a link to the gapps they recommend for their rom. You just need one that matches the android version (i.e ICS gapps for ICS roms)
That's the usual method. Most ROM threads will have instructions on them. Seems like a lot of steps, but it usually only takes a couple of minutes.
Hello guys,
i have decided to make a complete (as compete as possible) guide about flashing Custom ROMs because i didnt find any for our device.
I will try to keep this guide as clear as possible for better understanding and quick flashing!THE FOLLOWING METHODS HAVE BEEN TESTED A LOT OF TIMES, IN DIFFERENT DEVICES, AND THE RESULTS WERE SUCCESFULL!
Code:
[SIZE="3"][CENTER][COLOR="Red"]Your warranty is now void.[/COLOR]
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this GUIDE
before you begin the whole procedure! YOU are choosing to make these modifications at YOUR OWN RISK.[/CENTER]
[/SIZE]
BEFORE YOU PROCEED WITH THE FOLLOWING METHODS, IT IS HIGHLY RECOMMENDED THAT YOU MAKE A NANDROID BACKUP OF ALL YOUR DATA.(REQUIRES ROOT ACESS!)
PRE-REQUIREMENTS (INCLUDING CUSTOM RECOVERY AND ODIN METHODS):
1) Drivers. Here you can find the most recent(As updated from the site owner)driver package for your device (skip this step if you have already installed them). Download
2) A device with TWRP recovery installed. (If you want to flash your ROM via custom recovery)
If it happens that your device is not rooted, you can follow the ODIN method mentioned down below or you can follow this guide on how to flash a TWRP recovery!
3) ODIN. (If you want to flash your ROM via computer)
4) IMPORTANT: Make sure your battery is at least 90% charged!
5) OPTIONAL: Make sure your have downloaded the lattest GAPPS.zip.
6) OPTIONAL: Make sure your have downloaded the lattest SUPERSU.zip.
7) Some patience.
Changelog:
[16/02/2016(Minnor Improvements)] General cleanup.
[30/01/2016(Minnor Additions)] Added an #INDEX#.
[27/01/2016(Important Changes)] Changed some parts at the UNBRICK method.
[22/01/2016(Minnor Improvements)] Updated the ODIN method.
[20/01/2016(Major Additions)] New post: Unbrick, added.
[18/01/2016(Minnor Improvements)] Updated the drivers package.
[28/11/2015(Important Improvements)] Rewrote and added some parts on the Custom recovery and Odin guides.
[21/10/2015(Minnor Changes)] Changed the expresion on some parts. It should be easier to follow now.
#INDEX#
NANDROID BACKUP
CUSTOM RECOVERY METHODS
ODIN METHOD
UNBRICK
Credits:
@Android-Andi for his custom TWRP recovery and how to flash it method.
IF YOU FOUND THIS GUIDE USEFULL OR IT HAS HELPED YOU, CONSIDER VOTING ON THE POLL AND PRESSING THE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BUTTON.
NANDROID BACKUPNOTE: If the backup's android version was on an android version older than the one you are trying to flash DO NOT FLASH IT.(pss. it does no harm, just it is worthless)
NOTE: Backup must be done before wiping any partitions.
NOTE: In the following methods i will be using TWRP as custom recovery.
BACK UP PROCEDURE
1) Boot into recovery mode. (In order to do so, press Volume Up (+), Homebutton and the Power-Button at the same time untill you see the S3 Mini Logo, then release the Power-Button and keep pressing Volume Up (+) and the Homebutton untill you see the TWRP logo!)
2) From the main menu of the TWRP press the Backup button.
3) Then tick the partitions that you want to backup (Preferably Boot, Data and System).
4) Make sure that your destination folder is on your external sd-card. (If you dont have micro a sd card, save it on the internal storage and then transfer the files to a computer.
5) Choose a name or leave the auto-generated one.
6) Enable encryption, so others can't install your backup with all of your apps, contacts, accounts etc.
7) Swipe to Back Up.
8) DONE!
CUSTOM RECOVERY METHODS
NOTE: In the following methods i will be using TWRP as custom recovery.
NOTE: The following methods are completely different from each other, thus you should NOT try to mix them.
METHOD NO.1 (The clean installation) RECOMMENDEDIt is recomended but not necessary to perform a FORMAT DATA wipe before wiping the bellow partitions.
As you may have heard the clean installation, is a method that wipes all your device's DALVIK CACHE, SYSTEM, CACHE, DATA and INTERNAL STORAGE partitions.
YOU DONT HAVE TO WORRY ABOUT MAKING THE PHONE UNSUABLE.
By wiping SYSTEM partition, you only wipe the old ROM's files. The new ROM will genarate new proper files.
By wiping DALVIK CACHE and CACHE, you just clean the old " mess" of installed apps etc.
By wiping INTERNAL STORAGE and DATA you DO delete all of your personal files, apps, phone contacts etc.
WIPE PROCEDURE
1) From the main menu of the TWRP press the Wipe button.
If you dont want to follow the step 2 go to step 4.
2) OPTIONAL BUT RECOMENDED: Then press the Format Data button.
2a) Go back.
2b) From the main menu of the TWRP press the Reboot button.
2c) Then press the Recovery button.
After that your device will reboot by it self into recovery mode, continue.
3) From the main menu of the TWRP press the Wipe button.
4) Then press the Advanced Wipe button.
5) Tick the Dalvik Cache, System, Cache, Data, Internal Storage.
BE CAREFULL, DO NOT WIPE your Micro SD Card! Otherwise you will not be able to install your ROM.
6) Swipe to Wipe.
7) DONE!
INSTALL PROCEDURE
1) From the main menu of the TWRP press the Install button.
2) Browse to your micro sd card.
3) Find the ROM.zip file you want to install.
4) Press on it.
5) Then Swipe to Confirm Flash.
OPTIONAL STEPS FOR GAPPS PACKAGE. IF YOU DONT WANT TO INSTALL IT CONTINUE TO STEP 8
6a) From the main menu of the TWRP press the Install button.
6b) Browse to your micro sd card.
6c) Find your gapps.zip package.
6d) Press on it.
6e) Then Swipe to Confirm Flash.
OPTIONAL STEPS FOR SUPERSU PACKAGE. IF YOU DONT WANT TO INSTALL IT CONTINUE TO STEP 8
7a) From the main menu of the TWRP press the Install button.
7b) Browse to your micro sd card.
7c) Find your supersu.zip package.
7d) Press on it.
7e) Then Swipe to Confirm Flash.
8) After the installation is done, press the Reboot System button that will show up on the screen.
9) DONE!
METHOD NO.2 (The "dirty" installation) NOT RECOMENDEDWith this method you DO NOT wipe your INTERNAL STORAGE nor your DATA. You only wipe the absolutely unnecessary files from the old rom so the new rom can genarate new ones.
As you may have heard the "dirty" installation, is a method that only wipes DALVIK CACHE and CACHE.
By wiping DALVIK CACHE and CACHE, you just clean the old " mess" of installed apps etc.
NOTE: THE WIPE PROCEDURE MUST BE APPLYED BEFORE AND AFTER THE INSTALLATION
WIPE PROCEDURE
1) From the main menu of the TWRP press the Wipe button.
2) Then press the Advanced Wipe button.
3) Tick Dalvik Cache and Cache.
4) Swipe to Wipe.
5) After the Wipe is done, press the Back button that will show up on the screen.
6) From the main menu of the TWRP, press the Reboot button.
7) Then press the Recovery button.
8) DONE!
INSTALL PROCEDURE
1) From the main menu of the TWRP press the Install button.
2) Browse to your micro sd card.
3) Find the ROM.zip file you want to install.
4) Press on it.
5) Then Swipe to Confirm Flash.
OPTIONAL STEPS FOR GAPPS PACKAGE. IF YOU DONT WANT TO INSTALL IT CONTINUE TO STEP 8
6a) From the main menu of the TWRP press the Install button.
6b) Browse to your micro sd card.
6c) Find your gapps.zip package.
6d) Press on it.
6e) Then Swipe to Confirm Flash.
OPTIONAL STEPS FOR SUPERSU PACKAGE. IF YOU DONT WANT TO INSTALL IT CONTINUE TO STEP 8
7a) From the main menu of the TWRP press the Install button.
7b) Browse to your micro sd card.
7c) Find your supersu.zip package.
7d) Press on it.
7e) Then Swipe to Confirm Flash.
7f) After the Flashing is complete, press the Back button that will show up on the screen.
Repeat the WIPE PROCEDURE and after it is done continue from here to step 8.
8) From the main menu of the TWRP press the Reboot button
9) Then press the System button.
10) DONE!
ODIN METHOD
NOTE: With the following method you can't install Gapps. If you wish to install GApps you must install them with a custom recovery and by following the FLASH USING CUSTOM RECOVERY METHODS post. Same goes for the super su.
INSTALL PROCEDURE
1) Boot into Download mode. (In order to do so, press Volume Down (-), Homebutton and the Power-Button at the same time untill you see the Green warning screen. Then press the Volume Up).
2) Connect the device to the computer.
3) Open Odin on the computer.
4) Check if your device is being recognised on the top left of the Odin window. There should be displayed something like (e.x. 0:[COM3]). (If nothing is displayed, you propably didn't install the Drivers or you installed the wrong ones)
5) Make sure that only Auto Reboot and F.Reset time are ticked.
6) Press ONLY the PDA button.
7) Browse to your downloaded file (e.x. ROM.tar.md5).
8) Select it.
9) Press Start.
10) Wait untill the device reboots and on the top left is displayed one green box saying PASS!.
11) Unplug the device from the computer.
12) Immediately remove the cover and take out the battery.
13) Wait 5 secs and then put it back again.
14) Boot into recovery mode. (In order to do so, press Volume Up (+), Homebutton and the Power-Button at the same time untill you see the S3 Mini Logo, then release the Power-Button and keep pressing Volume Up (+) and the Homebutton)
15) Wipe data/factory reset.
16) Wipe Cache partition.
17) Press reboot system now.
18) DONE!
UNBRICK
NOTE: Please be sure that your device is bricked. To know if your device is bricked, your device should not boot into your current ROM at all and at some cases not even on (Custom) recovery. In other words you suffer from what is called bootloop.
If you are able to boot into your already flashed custom recovery use the FLASH USING CUSTOM RECOVERY METHODS and flash your custom ROM to regain access to the phone.
If you can not boot into your custom recovery but you can boot in download mode the problem is repairable. Be sure that you have the original recovery installed before you flash the Stock ROM because some roms don't include it and it may cause some issues.
If you can not even boot in download mode then your device is hard bricked and you must use an usb jig in order to make your device boot into download mode(ONLY) again. If at the end, you still can not boot into download mode then there is nothing you can do from a software-side
Download the stock rom you need form here: www.sammobile.com and unzip it on your computer.
UNBRICK PROCEDURE
1) Boot into Download mode. (In order to do so, press Volume Down (-), Homebutton and the Power-Button at the same time untill you see the Green warning screen. Then press the Volume Up).
2) Connect the device to the computer.
3) Open Odin on the computer.
4) Check if your device is being recognised on the top left of the Odin window. There should be displayed something like (e.x. 0:[COM3]). (If nothing is displayed, you propably didn't install the Drivers or you installed the wrong ones)
5) Make sure that only Auto Reboot and F.Reset time are ticked.
6) Press ONLY the PDA button.
7) Browse to your downloaded file (e.x. ROM.tar.md5).
8) Select it.
9) Press Start.
10) Wait untill the device reboots and on the top left is displayed one green box saying PASS!.
11) Unplug the device from the computer.
12) Immediately remove the cover and take out the battery.
13) Wait 5 secs and then put it back again.
14) Boot into recovery mode. (In order to do so, press Volume Up (+), Homebutton and the Power-Button at the same time untill you see the S3 Mini Logo, then release the Power-Button and keep pressing Volume Up (+) and the Homebutton)
15) Wipe data/factory reset.
16) Wipe Cache partition.
17) Press reboot system now.
18) DONE!
If everything went as it should you should now have stock rom with stock recovery installed.
In the ODIN method you dont mention how to install Gapps. Please explain me how to install Gapps with the odin method. And also i have a question... if I will use the odin method i will have root after installation?
SausageReunion said:
In the ODIN method you dont mention how to install Gapps. Please explain me how to install Gapps with the odin method. And also i have a question... if I will use the odin method i will have root after installation?
Click to expand...
Click to collapse
The most known and safe (in a way) method is flashing your ROM with a Custom Recovery which i highly recommend [also you dont mess alot with the binary counter that way(if you dont know what this is , please google it)], but if you want to go with the Odin method that's ok with me.
About GApps: In actually fact you can't flash GApps with Odin. GApps were created only be to flashed with a Custom Recovery(whether this is TWRP or CWM).
My suggestions are that after you flash your desired ROM with the Odin method there are two options:
1)You flash a Custom Recovery via Odin and then you use the guide from above(FLASH USING CUSTOM RECOVERY METHODS) and only follow the steps from 6a to 6e and then only the 8th step.
About the Root Access after flashing with Odin: That depends only from ROM that you flashed. If you want root access and your ROM does not support native Root Access you must install a custom recovery and from there flash the supersu.zip file.
NOT ALWAYS AVAILABLE:After you flashed your rom via Odin (and taking into consideration that you dont have a custom recovery) you should enable ROM's native root access managment tool. From there you can experiment as you like.
I hope i helped good luck and play it safe .
Which is the best custom ROM for s3 mini GT-I8190
Sent from my Sparkle V using Tapatalk
Hello! Please can someone tell me why when I install a ROM on my s3 mini with TWRP i t finishes too fast. For about 5-10 seconds. Is this a corrupted file. I have a cm 12.1 and I wanted to install a fusionkat ROM yesterday but this happens and I restored my cm
Rizan Mohammed said:
Which is the best custom ROM for s3 mini GT-I8190
Sent from my Sparkle V using Tapatalk
Click to expand...
Click to collapse
Really you cant define which one is the best. All of the roms that have been ported/created from our developers here, are great. It really depends on your personal liking.
marti2003 said:
Hello! Please can someone tell me why when I install a ROM on my s3 mini with TWRP i t finishes too fast. For about 5-10 seconds. Is this a corrupted file. I have a cm 12.1 and I wanted to install a fusionkat ROM yesterday but this happens and I restored my cm
Click to expand...
Click to collapse
Fusionkat ROM is a stock rom, so in order to flash it you have to use the odin method from the guide that i wrote on this page. Stock roms can only be flashed with Odin.
Hi btw can i flash rom for i8190 for i8190n?
I think its better if dalvik cache & cache will be cleaned again after installation and before rebooting the system in the Clean Installation
mangkoeboemi said:
Hi btw can i flash rom for i8190 for i8190n?
Click to expand...
Click to collapse
If you mean whether or not you are able to flash a rom intented for i8190 on a i8190N the answer is yes.
dev.wes07 said:
I think its better if dalvik cache & cache will be cleaned again after installation and before rebooting the system in the Clean Installation
Click to expand...
Click to collapse
I think it makes no difference since you delete every thing and also reboot the device after you wiped.
Which method do I use when I don't have rooted device and want to have Google Play ?
G3RV0 said:
Which method do I use when I don't have rooted device and want to have Google Play ?
Click to expand...
Click to collapse
If you dont have a rooted device and you want to install a custom rom, you can use the Odin Method. Consider that i don't recommend this type of thing. It is way better to have at least a custom recovery, then you can do whatever you want on your device. Best of luck
Thank you very much for the guide. I am new to flashing ROMs/rooting my phone and such (but I've done a whole lot of reading and I think I'm about up to speed, seems like fun stuff!) but I was just wondering if there is any way to do this using the Odin method BUT without having to download TWRP?? I have a mad nasty virus on here called pornclub (yet I don't actually watch any porn on my phone, if ever at all (gofigure! :| ...))
This virus started out just trying to download apps while I was connected to the internet and firing up popups for different supermarket stores etc, which was bare-able, but I done a factory reset on the thing and now it seems like the virus is back- and with a vengeance!!! It completely fills the whole phone with popups saying 'hot sexy girls now' etc and downloading so many different silly apps that I can't actually even use any function on the phone any more. So that means no phonecalls, texts, anything, it literally takes over the whole phone with these apps and pictures of all the 'sexy sluts' I can apparently go and meet right now. I also obviously cannot download TWRP or anything else for that matter.
So do I have any silver lining to my boob shaped cloud? Just need to know if there is any way I can just flash a new custom mod without having to download anything on the actual phone at this point, as I have just done a factory reset and now cannot access any functions on there because of popups etc.
Thank you very much kindly in advance for any help. Much appreciated!
edit: I should mention that it now also switches on the wifi and mobile data simultaneously without me even touching it. I currently have the phone sitting on download mode and charging.
zeneven said:
Thank you very much for the guide. I am new to flashing ROMs/rooting my phone and such (but I've done a whole lot of reading and I think I'm about up to speed, seems like fun stuff!) but I was just wondering if there is any way to do this using the Odin method BUT without having to download TWRP?? I have a mad nasty virus on here called pornclub (yet I don't actually watch any porn on my phone, if ever at all (gofigure! :| ...))
This virus started out just trying to download apps while I was connected to the internet and firing up popups for different supermarket stores etc, which was bare-able, but I done a factory reset on the thing and now it seems like the virus is back- and with a vengeance!!! It completely fills the whole phone with popups saying 'hot sexy girls now' etc and downloading so many different silly apps that I can't actually even use any function on the phone any more. So that means no phonecalls, texts, anything, it literally takes over the whole phone with these apps and pictures of all the 'sexy sluts' I can apparently go and meet right now. I also obviously cannot download TWRP or anything else for that matter.
So do I have any silver lining to my boob shaped cloud? Just need to know if there is any way I can just flash a new custom mod without having to download anything on the actual phone at this point, as I have just done a factory reset and now cannot access any functions on there because of popups etc.
Thank you very much kindly in advance for any help. Much appreciated!
edit: I should mention that it now also switches on the wifi and mobile data simultaneously without me even touching it. I currently have the phone sitting on download mode and charging.
Click to expand...
Click to collapse
Wow you seem to be in trouble but we can FIX it!
First of all i need you to have your battery charged to 100%.( if you cant charge your phone while its on, remove the battery and charge it to another phone or charge it with an external battery charger )
Power off your phone.
With the 3 button compination, go to your current(stock for you i think) recovery and do a factory reset. This will wipe all your data thus the virus.
After all this, boot into your rom.
Then you can flash a custom recovery and flash any rom you want.
You are done!
If this does not work for you, just let me know and i will post another solution.(i am not posting it right now cause it is more complicated!)
EDIT: Sorry for the delay but i didnt saw that you had already done a factory reset and it didnt work. That means that the virus is propably on the sd card. The solution is to wipe your sdcard and use the odin method. As simple as that. Please next time try to keep the things you tried and what is your problem together.
Geocfu1 said:
Wow you seem to be in trouble but we can FIX it!
First of all i need you to have your battery charged to 100%.( if you cant charge your phone while its on, remove the battery and charge it to another phone or charge it with an external battery charger )
Power off your phone.
With the 3 button compination, go to your current(stock for you i think) recovery and do a factory reset. This will wipe all your data thus the virus.
After all this, boot into your rom.
Then you can flash a custom recovery and flash any rom you want.
You are done!
If this does not work for you, just let me know and i will post another solution.(i am not posting it right now cause it is more complicated!)
EDIT: Sorry for the delay but i didnt saw that you had already done a factory reset and it didnt work. That means that the virus is propably on the sd card. The solution is to wipe your sdcard and use the odin method. As simple as that. Please next time try to keep the things you tried and what is your problem together.
Click to expand...
Click to collapse
Oops, sorry about that. Thank you for the reply.
I took the sd card out a long time ago but the problem is still there somehow. When I switch on the phone, I have about seconds before I can no longer use it because of popups etc...
Also, I just checked and it seems like I joined these forums on the exact same date as you but 1 year later, we both joined on the 18th of January.