[Q] getting AT&T GoPhone SIMs to work - Milestone 2 General

recently i've bought a milestone 2 and i wanted to see if my AT&T Gophone SIM card would work on it, turns out it doesn't no service, network, or phone number in the status menu
is there anyway to fix this or is my device just incompatible? i'd greatly appreciate any help on the subject manner

Related

Unlocked T-Mobile Wing + AT&T Prepaid SIM = Fail?

Hello everyone,
I have a T-Mobile Wing which I want to use with an AT&T prepaid SIM card. I called T-Mobile and received the SIM unlock code, but with the AT&T SIM inserted my Wing is unable to connect to the network (it simply says "Searching..." in the left corner indefinitely).
I understand that this device does in fact work with AT&T service so I am a bit mystified. Perhaps the solution is staring me in the face and I am just too daft to see it. If anyone could shine some light on this for me I would greatly appreciate it.
Is a 3G sim card? Might not work on an Edge phone
lol you have to configure the network for it to work. Try the cab in this post:
http://forum.xda-developers.com/showpost.php?p=4133169&postcount=13

Please help. AT&T sim won't work in unlocked Touch HD

Hello,
I've been pulling my hair out over this for days now, any help would be most appreciated.
I have a UK Touch HD, formerly on O2, but unlocked using Blackstone Unlocker.
I'm in the US and have a prepaid AT&T gophone Sim and it just isn't being recognised by my phone at all, it's driving me mad.
I've tried a friends US T-mobile sim and it seems to work OK.
Any ideas? Before I have to throw the whole lot out the window.
Ta
D
Dillops said:
Hello,
I've been pulling my hair out over this for days now, any help would be most appreciated.
I have a UK Touch HD, formerly on O2, but unlocked using Blackstone Unlocker.
I'm in the US and have a prepaid AT&T gophone Sim and it just isn't being recognised by my phone at all, it's driving me mad.
I've tried a friends US T-mobile sim and it seems to work OK.
Any ideas? Before I have to throw the whole lot out the window.
Ta
D
Click to expand...
Click to collapse
it could be because it's a GoPhone SIM. did you purchase with a GoPhone? if so, does it work with it's used in the GoPhone? if yes, i suspect that's your issue.
does the gophone have internet or 3g? my old att card does not seem to work at all with the touch so i had to get a new one
Hi,
Yeah it was a Go Phone sim. The crappy phone it came with doesn't do data but I assumed the sim would be data capable. I can by data bolt ons for it.

Bell Canada HSPA Network: Unlocked AT&T phones appear as roaming all the time

Everyone,
A few of us have been having a conversation over in the Raphael forum about an issue with the new Bell Canada UTMS/HSPA network. Due to Bell not carrying any HTC /HSPA capable phones, many of us have elected to purchase AT&T phones like the Topaz/Pure or Rhodium/Tilt 2 and get them unlocked. We have all been able to setup network connections etc, but the phones register as "roaming" all the time. I'm assuming that this is because Bell has some master list of IMEI codes for their own phones, and that any time a "foreign" phone registers on the network Bell sends it a "roaming" status. Can anyone confirm how this functionality works? We are all using Bell sim cards, and are not being billed for any roaming fees, so we're really not sure why this is happening. This also seems to happen with unlocked Android phones from Rogers when they run on the Bell network, but not with the Nexus One for some reason. Any help would be appreciated.
Link to thread in Raphael forum...
http://forum.xda-developers.com/showthread.php?t=641299
Bump
Bumping this up, does anyone have any insight into this issue?
any updates? I'm having the same issue.
bobzero said:
any updates? I'm having the same issue.
Click to expand...
Click to collapse
I still have this issue, I haven't been able to find any way around it.
Bump !.
Tilt 2 on Bell same problem
Same problem here...
My phone unlocked Koodo phone is always roaming with my Fido SIM card.
Phone calls and Data work okay, but Radios are always roaming.
Anybody figure this out?
Nope, after more than a year, I gave up and moved onto a new phone.

[Q] SIM not valid - Enter SIM network unlock PIN

I have tried every code mentioned, in here, that was successful for others but not for me.
I started by buying my Galaxy S4, out right, at Walmart for use on Family Mobile. Poor signal everywhere except in my house. The phone has T-Mobile support as far as towers go. After about three weeks I had my phone number transferred to Straight Talk and they sent a SIM card for use with AT&T support. The phone was purchased as an unlocked phone, I did all the codes in this forum to check and sure enough, it is supposed to be unlocked, BUT, every SIM card I get from Straight Talk gives me "INVALID SIM CARD" when I boot up the phone then a black screen comes on with a subdued color message saying, "Sim network unlock PIN" and all the help from Family Mobile, T-Mobile, Straight Talk, Walmart and AT&T, have not helped my situation. I can't write a new APN and store it because I have an invalid SIM card. I have tried the service mode and did everything mention in these forums but no luck so far.
I really like the device(my NOT-Phone) but it does not function as a phone. Can anyone help with this one?
:crying:
gdeem01 said:
I have tried every code mentioned, in here, that was successful for others but not for me.
I started by buying my Galaxy S4, out right, at Walmart for use on Family Mobile. Poor signal everywhere except in my house. The phone has T-Mobile support as far as towers go. After about three weeks I had my phone number transferred to Straight Talk and they sent a SIM card for use with AT&T support. The phone was purchased as an unlocked phone, I did all the codes in this forum to check and sure enough, it is supposed to be unlocked, BUT, every SIM card I get from Straight Talk gives me "INVALID SIM CARD" when I boot up the phone then a black screen comes on with a subdued color message saying, "Sim network unlock PIN" and all the help from Family Mobile, T-Mobile, Straight Talk, Walmart and AT&T, have not helped my situation. I can't write a new APN and store it because I have an invalid SIM card. I have tried the service mode and did everything mention in these forums but no luck so far.
I really like the device(my NOT-Phone) but it does not function as a phone. Can anyone help with this one?
:crying:
Click to expand...
Click to collapse
No warranty in Walmart?!
If it connects to T-Mobile towers out of the box, can you borrow a T-Mobile SIM from soneone and go through the SIM unlock procedure? I'd do that just to make sure it's SIM unlocked. Then try Straight Talk with whatever APNs they use. Do this on stock and once you can confirm you get that far and it's working then go crazy. Good luck.
Locked SIM card
Daistaar said:
If it connects to T-Mobile towers out of the box, can you borrow a T-Mobile SIM from soneone and go through the SIM unlock procedure? I'd do that just to make sure it's SIM unlocked. Then try Straight Talk with whatever APNs they use. Do this on stock and once you can confirm you get that far and it's working then go crazy. Good luck.
Click to expand...
Click to collapse
If I put the original, 1st SIM (Family Mobile) that I bought, back in, I do not get the Unlock Sim code message but I also do not have service because I already had the number ported. I've been that route. I tried the APN routine but it won't save because I don't have service with that SIM card. I go into the unlock routine through the service mode and it says it's already unlocked. Any Sim card from Straight Talk gives me Invalid SIM.
I'm going to return it to Walmart and try another phone.

Swith to tMobile w/o Root?

According to one of the mods at Android Central you can switch a 900v to tmobile and get full lte speed by manually changing the apn. No need to switch to band 4. Is this true? Has anybody done it? I would love to stick in a tmobil3 sim and try it while retaining the option to go back to vzw unlimited data if tmobile signal is unsatisfactory. Thanks for your help!
900v on Tmobile
I have tried my wife's t-mobile $30/month no contract Sim card in my Sm-900v and it works great. I got 4g lte and the down load speed was 43mb. It was faster then my Verizon speed of 15mb. The t-mobile Sim card automatically stored the apn on the phone but if it does not just manually add the apn.I did verify that my band 4 was already enabled.. Band 4 has to be enabled to use on T-Mobile BUT you do not have to disable band 4 if you want to go back to verizon leave it alone. For what i understand Verizon enables band 4 out of the box so just get a cheap pre- payed card and try it out for a month. Hope this helps you out.
So no need to call for unlock code? Tmobile guy said they woildnt give me a sim without it
recDNA said:
So no need to call for unlock code? Tmobile guy said they woildnt give me a sim without it
Click to expand...
Click to collapse
I bought my phone used so I do not know if it was factory unlocked.. 2nd you can just go to any store that sells t-mobile sim cards and buy a prepaid Sim card. I bought mine online from t-mobile (out of convenients) they mailed it to me.. no need to go to t-mobile store. Again buy a cheap Sim to test on your phone. Worse case if your phone is carrier locked you will only lose $30. Or if you have a friend with a different carrier try there Sim card to see Iif your phone is unlocked or not. Also you can just call Verizon customer support and just ask for the unlock code it's free.
Where does the code go? Is there a setting where?
As soon as you install new sim card and reboot phone first thing it will ask you for a unlock code.. you will enter code on same screen. If it does not ask you for a unlock code then your phone is not locked then enjoy your new tmobile phone.
Sent from my SM-N900V using XDA Free mobile app
Thanks for the 411.
No problem hope it helps you.
Hit the thanks button if i helped you

Categories

Resources