Pls explain 1st init, 2nd boot, bootstrap and safestrap - Milestone 2 General

I have been using droid2bootstrap on my milestone2. I notice there is an option for 1st init 2nd boot or something like that. I have been holding out from trying tezet's cm9 because of the camera not working and now i saw a new post that someone has a cm9 rom with a working cam (sorry i forgot the dev's name i think its ondavol or something) i would like to try it out. I have read somewhere about safestrap. Is it safe to use on m2? Tia.

Safestrap is based over CWM, so it should be easy to port, but I'm not sure it's currently compatible with M2. You can try to install it, just keep in mind that you'll need to flash a sbf in case something goes wrong.
2nd init is a set of scripts that run on the OS startup, allowing devs to sideload some files, required to run custom ROMs. At least that's what I understood of it while I used it. I can be completely wrong about it. Be careful =P
Flashing a custom ROM is relatively harmless, just keep a nandroid of your original system and you should be OK. Safestrap just automatizes it, automatically flashing safe and unsafe ROMs on your device with a few clicks, safe being the custom ROM, where you can play as you want without harming the original system, and unsafe being the original system, where it's unsafe to tinker with it. Besides that, it's just CWM.
M3 XT860
DarkDroid 1.1 (Unsafe) + Hash's ICS Beta 1 (Safe)

Thanks you very much for the reply. I am happy with m currentt setup but i am really itching to try out ics. Like i said the lack off camera is put me off from trying just yet. The moment i read about this new rom with camera somewhat working, i just cant resist anymore.
I guess nandroid is the way to go then.

The developer is called rondoval
Just keep in mind, that it's not possible at the moment (afaik) to unlock your SIM card. So you can use Wifi only.
That's just a reason for me to wait for another build with fixed SIM unlock...
Camera works with normal photos only, so no panorama and no videos
Still a step

Related

[Q] Backing-up and flashing

Hey, guys (and girls? )! Just got a new DEFY+ couple of days back and I'd like to get the most out of it. It's already working all smooth and sexy, but I'm sure it can do better. So I need some assistance
Phone info:
DEFY+ (MB526)
Android 2.3.4
System 45.0.74.MB526.Retail.en.DE
Kernel 2.6.32.9-gbad50c3
Build 4.5.1-134_DFP-74
I've rooted it yesterday and I'm pretty sure it was successful, since the phone is working and I've got SuperUser on it since then (I've followed the root part of the all-in-one super DEFY guide thread)
About backing up, I would like to be able to go back to my old backup at any time. Is that even possible? I know I probably never will go back to it, but I like to play things safe. If it is possible, could you teach me how or point me to some nice guide/thread on that?
When it comes to flashing, I'd like to try CM, WAJKIUI and MS2G. Any more ROMs that are a must try? Now, I didn't quite understand... Are there different versions for defy and defy+? Or...which ROMs are compatible with defy+? I've read somewhere that all defy ROMs can't use defy+'s battery properly, so that's what concerns me. Nandload? How to?
I'm sorry if these are stupid questions, I've tried finding out everything from the guides, but I just didn't find enough information... I do have RSD (v5.0.0, is it okay?) and the drivers, all set up. I'm not asking for anyone to write an essay for me, it will be perfectly fine if you just point me to some (really really) good guides. I'll be grateful for any and every answer!
*EDIT #1* Well, I've tried to learn some more... Let's go step by step. Should I install 2ndInit app or some other custom recovery app?
I can beg if need be
"*EDIT #1* Well, I've tried to learn some more... Let's go step by step. Should I install 2ndInit app or some other custom recovery app?"
Hi,
as I've seen the guides, yes.
I've defy, so I didn't try it, but heard from many people with defy+ with CM or MIUI.
BUT before it I suggest to you:
- get a stock sbf of your rom. It is necessary if you want get back the original factory state. hope here you find it: http://forum.xda-developers.com/showthread.php?t=966537
- install titanium backup from market (I know this, but you can install any similar app) and make a full backup (all user and system app). It saves all data, installed apps with settings ...
- make backup of your contacts and sms-s with stock app (it is possible I think)
- make backup of your sd content
After that you can install 2ndinitdefy. Follow the instructions in the program. I suggest 1.4.2 version. If it doesn't work go to 2.0. The 2.0 has instructions not on the main screen but in its menu.
After the 2 reboot (regarding 2ndinit install) you can do a nandroid backup with clockworkmod recovery.
Reboot, push vol down at blue led (after start with 8-10 sec). You are at bootloader. Use vol up/down to navigate and power to enter a menu. Go to recovery-> custom recovery->backup and recovery->backup all. It takes some time. You can save this nandroid to computer (just for safety ) You find it in sd/clockworkmod/backup.
Now you have backups. Go ahead, install the custom rom of your choice.
I recommend WajkIUI. You find the link in my signature and you find installing instructions in Wajk's first post. And of course there are defy+ users in that thread as I remember, you can ask question there.
ps: everything is your responsibility
Was it helpful? Just use thank button
Good luck bro/sis !!!
Thank you for such a long reply!
I have installed 2ndInit, using the v2.0 installer, but I chose the stable version of the 2nd init itself, instead of the latest one. That stable one said it was meant for CM and MIUI, so I'm guessing I'll be alright with WajkIUI as well!
I'll follow the steps you gave me for making a complete backup of everything on my phone and then I'll start looking for a ROM that's fully mb526 compatible (I need >10 posts to be able to post in the development section :/ )
P.S. I'm a bro
I see. This 10 post rule a bit annoying. But as I know you can send private message to anyone. In the Wajkiui thread there are some people with 526.
I've got my 10 posts Thank you once more and I'm sure we'll be talking again soon!
I'm having a hard time finding a full SBF of my stock ROM...
It's 4.5.1-134_DFP-74 (Android 2.3.4)
I don't really understand the codes in that name, so can someone please tell me if I could flash some close to this sbf if I ever need to? I've found some with just that value after "...DFP-" different. Would they be okay?
Please let me know! I wanna load up something different, but don't want to do so until I have a full sbf as well, just in case of emergency
niksy+ said:
I'm having a hard time finding a full SBF of my stock ROM...
It's 4.5.1-134_DFP-74 (Android 2.3.4)
I don't really understand the codes in that name, so can someone please tell me if I could flash some close to this sbf if I ever need to? I've found some with just that value after "...DFP-" different. Would they be okay?
Please let me know! I wanna load up something different, but don't want to do so until I have a full sbf as well, just in case of emergency
Click to expand...
Click to collapse
You should ask Walter79. I found similar sbf as yours in his thread /forum.xda-developers.com/showthread.php?t=966537/ at "my roms" link:
www.4shared.com/folder/YpyTOtp4/Defy-roms.html
Bests
Mate, thanks for the info, but I've already found and flashed a full .sbf The topic said it was 2.3.4, while it turned out to be 2.3.5, but I don't mind, got my phone working again after a failed flashing of cm7.2..!
Cheers

I bought a used A500 that was already rooted.

I bought it and it appears to have ICS because the Android version is 4.0.3 but that is all I really know right now. I expect that it was never updated OTA though because the guy I bought it off had it for 2 months and he was not the one who rooted it. I was going to leave it as is because I bought it for my 10 year old daughter...but the camera takes very blurry, kind of grainy looking pictures.
I am not afraid to root because I had a Samsung Fascinate and I loved the custom roms I downloaded to it. It had been over a year since i had the Fascinate so i am a little rusty when it comes to all if this. My problem is not knowing where to start with this A500 because I am unsure what has already been done to it.
The guy who sold it to me said he did a factory restore, but when I ran the check root app it does state that it's rooted and I figured it was because there is a app called superuser on the device. I don't know what kernal it has. I don't know if it has a bootloader and/or the version number. I don't know if it has CWM and/or the version. number.
What is the best way to proceed? By the way, the tablet is very clean with absolutely no scratches anywhere. Not a bad buy for $175 with a leather case...
Setting > About tablet. That should tell you quite a bit of info about it no?
download the acer recovery app , it will tell you what Bootloader you have and what recovery
Thanks for the replies! When I get home I will check. I don't want to brick the thing. I ordered a micro SD today and I will get it in 2 days so there is no hurry for me to proceed. Is it worth it to keep it rooted? Is the OTA ICS good enough? I don't think my daughter cares if the tablet is overclocked but if the roms are much better than stock than I would keep it rooted and then download a preferred rom.
Vintage144, in another post you specified that there is a Acer recovery beta...will I need that or would I just get the one from google play? Also when I find out which version of recovery and bootloader I have...I am not sure what to do with the information. Could AfterOta help me accomplish what I want if my goal is to try and fix her camera issue...either by going back to stock or updating the kernal and rom.
I don't want to seem like a noob but my only rooting experience was with my Fascinate which I did everything from stock. Now that I am not coming from stock, I am unsure where to go with what I have. It's like trying to get to a goal but not sure what step to start at. If I was starting from stock I could follow some of the threads here but it's not stock.
What info will I need to post here to let you guys know what is in my A500? I know that the Android version is 4.0.3 , what else will I need to post?
well the beta copy I believe is at thors tegra forum , but its by euclids brother (thats his name on xda) anyway if you've upgraded your BL it will tell you version you have and might give you accurate Recovery as well, if the device is only for your daughter and she's too young to really do anything I would stick with a stock rom and realistically I would upgrade the boot loader , why be left behind?
Theres no reason to root if you dont plan on doing anything major with it,that being said you wont be able to get a newer Boot Loader or custom recovery without it, and custom recovery is well worth the effort!
You guys are the pros so I will take your advise. I don't mind it being rooted and if there are some really nice roms I expect my daughter would like the different looks...it would seperate hers from others.
Android
4.0.3
Kernel version
2.6.39.4+
Image version
Acer_AV041_A500_RV16RB02_WW_GEN1
Build number
KJY2010lcylicious
Anything else I will get when I get home.
I would like to know how to get through all this in case I decide to get myself a A500 it's a really nice tablet.
Okay
Recovery Version: Revamped for Iconia 3.16
Bootloader Version: 3.01
With all the above information what would be my next step?
Sorry
Recovery Version: RA Revamed for Iconia 3.16
Damn auto correct!!!
You're already running an older custom rom...
You have root - your words not mine...
You can download another custom rom, put it on the sd card/ internal memory and reboot into recovery. You need to wipe cache, dalvik cache and do a data wipe(factory reset) after which you can install zip from sd card. Go to the rom zip file you put there and install...
Wait until it boots...
I don't know if you're running the new ICS bootloaders or not.
BEFORE FLASHING - make a nandroid backup. If things go bad then you can go back and restore the tab to before the flash...
It's worth getting your CPUID and keeping it safe somewhere and you might think about installing the ICS bootloaders (I'd do it just to be sure I have them) but thats you're choice...
Good luck...
ultramag69 said:
You're already running an older custom rom...
You have root - your words not mine...
You can download another custom rom, put it on the sd card/ internal memory and reboot into recovery. You need to wipe cache, dalvik cache and do a data wipe(factory reset) after which you can install zip from sd card. Go to the rom zip file you put there and install...
Wait until it boots...
I don't know if you're running the new ICS bootloaders or not.
BEFORE FLASHING - make a nandroid backup. If things go bad then you can go back and restore the tab to before the flash...
It's worth getting your CPUID and keeping it safe somewhere and you might think about installing the ICS bootloaders (I'd do it just to be sure I have them) but thats you're choice...
Good luck...
Click to expand...
Click to collapse
Probably want to hold off on flashing roms a second.
He's running an HC Bootloader. I'm 99% sure of this. Reason, RA Revamped 3.16 doesn't work with ICS Bootloaders. So you can install an ICS Rom, but, it has to be an ICS Rom for the HC Bootloader. And the performance under HC BL is not near as good as ICS BL.
I would do like UltraMag mentioned as far as install steps and such. It's how we install roms.
Check this thread;
http://forum.xda-developers.com/showthread.php?t=1622425 (steps 1-6)
, and install an unlocked ICS Bootloader and a CWM 7 or 7.2 recovery. Then install one of the Roms made for the ICS Bootloader.
I know AfterOTA will do some of this for you. But this thread gives a good idea of what's going on.
Thanks for your help. I will be getting my micro sd card on Friday. In the mean time I will do a bunch of reading about the things you guys told me to do...again thanks a lot. I really appreciate the help.
I am the kind of person that really wants to know what I am doing...I don't expect all the answers, I just don't want to brick this device.
Forstir9,
Moscow Desire is a great dev on this board, his information about updating the bootloader is dead on. I recommend reading the entire OP in that thread, and then re-read section listed as Automated Flashing Tools, it really helps tremendously if you are a person familiar with root, but not extremely dynamic with making these changes.
I've rooted several BN Nooks and my A500 many many times and love it. I had the Honeylicious ROM that you listed prior to what I'm currently running. KYJ had a great HC ROM with that one! Personal preference currently for me on the ICS ROM is FLEXREAPER from Civato, poster of the referenced article from MD above, you can find that ROM info here: http://forum.xda-developers.com/showpost.php?p=22964651&postcount=1 Lots of cool features and step by step directions, which are what UltraMag69 listed in their post. There are many many different options though and I recommend reviewing several and then settling in on one when you find the one that fits your (or your daughter's) preferences best.
If you enjoy doing this and playing with the tablet your daughter may not keep it and may end up getting something different, because you may have too much fun with it...good luck, have fun, don't be scared to try things and ask questions (after you read first), and most importantly BACKUP BACKUP BACKUP...
Good luck,
-DB
Let me get this straight then.
1) boot into recovery and make a nandroid backup.
2) within that backup I should be able to find the CPUID on my sdcard...I will want to write this down and the write it down again somewhere else...out this number on my phone and computer...pretty much don't lose this number.
3) follow steps 1-6 from the link that Moscow Desire posted.
I am going to go with the Flexreaper rom...should I go with the extreme one or is there another Flexreaper rom that isn't extreme?
4) I think the 6 steps above will install a ICS bootloader
5) find and install the newest recovery
I only have 2 questions
How many of these steps does the Afterota app get Rid of?
Should I use the Acer recovery app to install the bootloader and/or the recovery?
forstir9 said:
Let me get this straight then.
1) boot into recovery and make a nandroid backup.
2) within that backup I should be able to find the CPUID on my sdcard...I will want to write this down and the write it down again somewhere else...out this number on my phone and computer...pretty much don't lose this number.
3) follow steps 1-6 from the link that Moscow Desire posted.
I am going to go with the Flexreaper rom...should I go with the extreme one or is there another Flexreaper rom that isn't extreme?
4) I think the 6 steps above will install a ICS bootloader
5) find and install the newest recovery
I only have 2 questions
How many of these steps does the Afterota app get Rid of?
Should I use the Acer recovery app to install the bootloader and/or the recovery?
Click to expand...
Click to collapse
First off. Thanks for thinking I am the "God" of the 501". Yeah, I know it pretty well.
Second, Ultramag, is is one of my right hand men. So I suggest you heed his advice well. I always trust his judgement. Am sure he has puled my arse out of the wringer a few times. Well, maybe not, but you get the picture. Some of us on XDA, support each other. That's how it is. I just noticed the bootloader version, And being one who likes flashing experimental code, well, I noticed.
So;
1. ALWAYS make a recovery backup. Then, restore it to make sure it works. (lots of people don't do this and they get fubar'd later).
2. UID. Seriously. Ok, the link on the many ways to get it. You don't want to get it, well... your;e pretty much fubar'd
http://forum.xda-developers.com/showthread.php?t=1624645
3. He has the normal, and one with a kernel you can overclock. Your choice. Really, if you don't OC, then you run the same as the original. Please don't ask me the names of Civatos roms. The extreme will be fine for you. Just don't overclock it if you don't want to. Only difference is the kernel. Not the OS.
4. Yes.
5. For recovery, I would say CWM 1.7.2. Should work for you. 1.7.0 is also ok. Publick recovery is ok too.
6. Never ran After OTA. But hear it is good when you already have ICS.
Forget AcerRecovery. You will already have bootloaders and recovery installed.
MD
Know I'll probably get a bashing out of this but there's a V1.7.3 recovery on the site that must not be named (cough, tegraowners, cough) that supports the Aroma installer - on Thor's ICS rom anyway...
Just thought I'd throw that in too...
I am ready to do a backup...it's asking me what I want to backup...it has a (X) next to the following...
Boot
System
Data
Cache
Flexrom
Is this correct the way it is?
EDIT: ignore this post I didn't see page 2 -_-
Sorry that I didn't post this in Friday...but I really want to thank everyone for their help. It went very easy and it want too much different than my fascinate.
The camera still takes grainy pictures and a few apps has sounds issues but she really likes the rom a lot.
Thanks again for the help.

[Q] A500 rooted but unable to flash ICS

Hello...
I've spent about a good week and a half trying to root and install ICS on the A500 at where I work. My goal is to get ICS or higher on this device so that it can be used for testing purposes. I was able to root and install CWM but have not been able to flash ICS or JB. Am hoping you guys can point me in the right direction.
I have tried to flash cm-10-20121027-UNOFFICIAL-a500.zip and cm-9-20121221-NIGHTLY-a500.zip but what I get in both cases is my device hanging on the Acer logo. My last attempt I left the device like that over the weekend and this morning it was still displaying the logo.
The CM9 nightly wouldn't install at first until I came across a post that said to remove the first line of the install script, which I did, and the install seemed to happen but as I mentioned the device hung up at the Acer logo.
No idea how to move forward here... there are hundreds of posts and updates on the topic but quite frankly there are terms that I've never heard of, all sorts of caveats, specific recoveries that need to be used, dead links, etc... am making no progress.
I do have a backup up of HC, so am able to revert easily via CWM.
Current Android is 3.2.1, build is Acer_A500_7.014.02_COM_GEN2
@eyepoker..... I honestly don't see where your problem is provided you are prepared to load a custom ICS rom from any of the Developers in thread #3. Without picking out a favorite I would suggest any of "Civatos" FLEXxxxx ..... SHELLshock..... roms will give you a highly customized ICS Rom.
Be aware that you will have to load first an ICS Bootloader..... you cannot run these custom roms on a HC Bootloader, but in "Civatos" posts there are links to tutorials on how to do this.
The issue is that i can't flash a rom, it doesn't work. The device hangs with the Acer logo displayed and advances no farther after a flash and reboot.
Should my take away be that the latest CM nightly and the unofficial don't work? Should i not bother with CM? Is ClockworkMod old now - is there something else I should be looking for?
I'll look at the bootloader stuff you mentioned.
@eyepoker..... With respect you know your tab better than I, however unless you have bricked it (you don't say it is nor does anything you say about it suggest that is the case) then there is no earthly reason why you cannot load a ICS rom onto it. Now I am not going to say that there is a problem with the NIGHTLY updates of CM roms but is it possible that an app that you have previously installed is causing a problem with CM?
To prove to yourself that your tab can run ICS why don't you try the following.....
1) Follow the instructions in Civato's thread to load an unlocked ICS Bootloader..... I would recommend "v.8"
2) Download one of his ShellShock or Flex roms and put the zip file onto your External SD card - DON'T unzip the file leave it in it's zipped state.
3) Boot into CWM Recovery - do the necessary "wipes"
4) From within CWM install the zip from your SD Card
I am quite certain that the rom will install.
If the above doesn't work then I think there is far more wrong with your tab than it being unable to flash a rom.

from android 2.2 to 4.x guide

I never did any software changes to my phone, because of this whole warranty talking, but today my warranty is over, so this finally the time for some upgrade . Currently I have B138 ROM and I want something with android 4.0+ for google hangouts, and much more apps that are based on API level 14. So my first question: is CM11 stable enough for every day use? I don't have second phone, and I have to be on line most of the time.
Assuming that it is, I did prepare a little todo list:
Install stock rom through dload (Second question: will B518 be good enough, becouse if anything goes wrong I will still have pink screen; Third question: Should I wipe data and/or cache? It would be wiped anyway, or not?)
Root the phone using [U8800] [How To] Root, Install ClockworkMod + Remove Bundled Apps from Official 2.3.5 (link to SuperOneClick inside this thread is dead, but I found it elsewhere)
I'm rooted so I can backup my IMEI thanks to [Helpful][Tutorial][Caution] IMEI backup & Flash your IMEI
I still have stock recovery, [RECOVERY] ClockworkMod Recovery [v6.0.4.6]
If answer for second question will be “You should use latest official, B528”, I will have to get my PINK screen back (in this tut Blefish recommended 5.5.0.4 recovery, 6.0.4.6 installs on top of it, so I will rather stay with 5.5.0.4)
If CM11 is stable enough partitioning is required: [PARTITION] BlePart [v2.x].
[ROM][07.09.2014] Unofficial Cyanogenmod 11.0 [4.4.4]. This ROM is rooted out-of-the-box, isn't it?
[GAPPS][4.4.x] OFFICIAL Up-to-Date PA-GOOGLE APPS (All ROM's). And here it goes a little messy. A lot of different packages, replacement of stock apps, Titanium Backup required (?), I don't know how to install, update, remove them...
Anyway, see guys how much have you done for anyone who has u8800, it's everything right here and only thanks to you I was able to make above list .
Is everything in right order? Is there anything important that I didn't found and read before posting this?
EDIT: If anyone will need this in the future:
Second step didn't worked, SuperOneClick freezed in "Step 7", I found [URL="http://forum.xda-developers.com/showthread.php?p=23565074]this[/URL] tutorial and it rooted my phone (I had to use included adb drivers).
CWM 5.5.0.4 wasn't able to install CM11, with error "E:Error in /sdcard/cm-11-... .zip (Status 7) Installation aborted", with CWM 6.0.4.6 I had no problems.
/system partition from BlePart allows only for micro PA-gapps
It's good decision to Flash Custom ROMs as there is no good original FW for this good phone. It's a "Do It Yourself" phone! :fingers-crossed:
But there are more than one CM11 versions like there are more than one CM10 versions, etc. You should better read their forum pages and then decive yourself which one to use...
ROMs which need re-partitioning is one step further than classic Custom ROMs. For this case you should better try firstly some ROMs which don't need partition. For e.g. Aurora will be a perfect option for that.
You can get Aurora v5 Update 20 and 21 (which I have used very long time) from its topic:
http://forum.xda-developers.com/showthread.php?t=1492957
Then you can do partitioning. I personnally suggest Forumber's partition file.
After partitioning you can try Aurora SP+ Update 2 which I am currently using. You can get from here:
http://forum.xda-developers.com/showthread.php?t=2295318
Next step is Blefish currently developping ROM. After trying Aurora SP+ you can go one step further and flash Blefish. You can even participate to the topic with the issues you may face in this still developping ROM. Get it here:
http://forum.xda-developers.com/showthread.php?p=49579659
Thanks for reply, I'm using CM two days from now and I'm amazed what this phone is capable of To be honest I didn't choose Aurora ROM because of 800 pages topic to read . I wasn't shure from where start reading, so I read the whole topic about 4.4.4. And I didn't even thought about leaving stock partition schema. In 2.2 I had problems with lack of space for applications.
But you advise in just one answer to try 3 different ROMs. And I belive many people do so - they change ROMs weekly, monthly to find the best one for their needs. My question is: how to restore everything, everytime when new soft is flashed? Google can restore phonebook. Titanium Backup SMS, and apps. But app data? Saved games? Saved progress in books? And we talking here about jumping between two kernels (.32 and .35), and many API levels. How do you do it?

Verizon Note 4, I have Root and BL Unlock. A few questions within.

So after blowing off the second half of my duties at work today, I managed to allocate enough time to get my SM-N910V rooted.
I have a few basic questions about what I should expect to see happen.
Allegedly, Verizon is rolling out an OTA upgrade to 6.0.1 Marshmallow sometime soon. Now that I have 'custom' boot and root achieved, will my device still receive and adhere to this OTA upgrade?
I have not applied any custom ROMs to the device. All I have done is follow the steps on this forum to unlock the bootloader and permroot.
If yes, cool!
If no, could someone please share with me a uniform resource identifier (lol) that links to a guide for installing CM13 to this device?
I will use my mind to beam eternal luck at anyone who helps me out. Thankyas.
Have you ever used Odin?
If you have twrp just load onto an sd or the phone and make sure to clear cache and wipe.
Bicknasty said:
Have you ever used Odin?
Click to expand...
Click to collapse
Yessir Mr. Nasty,
I followed a guide on this part of the forum that had me use Odin. After using Odin successfully I was able to get TWRP up before normal boot!
vIgGeN7 said:
If you have twrp just load onto an sd or the phone and make sure to clear cache and wipe.
Click to expand...
Click to collapse
Just to clarify, you're saying that if I boot into TWRP again and clear the cache/wipe, I'll go back to factory settings and get the OTA?
If you have a microSD card, use TWRP to backup all of your current data to it if you'd like to preserve it and have something to restore if anything goes awry. Download a custom ROM zip and whatever other zips you'd need for that particular ROM, and put them on the card. Use TWRP to format data and wipe everything EXCEPT FOR THE CARD, and then reboot into recovery mode again and open the TWRP install menu.
In that menu, navigate to external_sd (or whichever root level folder it is that contains the strings "ext" and "sd", referring to the microSD card), and select the zip or zips (in the proper order) that you want to flash. Then flash them, wipe cache/dalvik, and reboot.
I wouldn't stay on a stock ROM if I were you. You might avoid getting the OTA, but you're guaranteed to avoid it by running a custom ROM. JasmineROM seems to be the go-to ROM for stability, but hsbadr's CM13 builds are very functional.
Bicknasty said:
-snip-
Click to expand...
Click to collapse
Thank you for being so specific and clear, and for helping me out. I am new to this, used to working on computers that I can tear apart more easily and change things inside of.
I will keep this in mind and consider switching. I have a lot of free time with a 1GB/1GB
Futtermax said:
So after blowing off the second half of my duties at work today, I managed to allocate enough time to get my SM-N910V rooted.
I have a few basic questions about what I should expect to see happen.
Allegedly, Verizon is rolling out an OTA upgrade to 6.0.1 Marshmallow sometime soon. Now that I have 'custom' boot and root achieved, will my device still receive and adhere to this OTA upgrade?
I have not applied any custom ROMs to the device. All I have done is follow the steps on this forum to unlock the bootloader and permroot.
If yes, cool!
If no, could someone please share with me a uniform resource identifier (lol) that links to a guide for installing CM13 to this device?
I will use my mind to beam eternal luck at anyone who helps me out. Thankyas.
Click to expand...
Click to collapse
I dont know what everyone is thinking, but OTA will not work with rooted device. It will failed and in most case you will nee to flash full stock rom to fix it, then your bootloader will locked again. The best bet is to wait until Samsung released the rom and Dev here will modified it the right way so you can flash with TWRP.
Sent from my SM-N920V using Tapatalk
Honestly, don't bother with CM13 yet. It's buggy. I was on it for a short while, tried a couple different builds but I got sold on the Note 5 port which is on 5.1.1. If you have any apps that don't allow mock locations, they won't work on any 6.0/Marshmallow ports (i.e. CM13) from my short experience. I could be wrong. I couldn't find a way to allow mock locations on CM13, so I went somewhere else.
JOSHSKORN said:
Honestly, don't bother with CM13 yet. It's buggy. I was on it for a short while, tried a couple different builds but I got sold on the Note 5 port which is on 5.1.1. If you have any apps that don't allow mock locations, they won't work on any 6.0/Marshmallow ports (i.e. CM13) from my short experience. I could be wrong. I couldn't find a way to allow mock locations on CM13, so I went somewhere else.
Click to expand...
Click to collapse
I think CM13 is worth giving a chance.
I'm about 90% sure the MM update will come with a new bootloader (a locked one). I highly advise against trying to accept it if/when it comes. Someone here will tear it apart and make odin flashable images to get us on 6.0.1 TW rom. Until then, flash TWRP and CM13. I've been using it daily and it's one of the better CM roms I've used on any device.
Also look into Dual Boot Patcher so you can crack flash roms without affecting your primary one.
Sent from my SM-N910V using Tapatalk
Bicknasty said:
If you have a microSD card, use TWRP to backup all of your current data to it if you'd like to preserve it and have something to restore if anything goes awry. Download a custom ROM zip and whatever other zips you'd need for that particular ROM, and put them on the card. Use TWRP to format data and wipe everything EXCEPT FOR THE CARD, and then reboot into recovery mode again and open the TWRP install menu.
In that menu, navigate to external_sd (or whichever root level folder it is that contains the strings "ext" and "sd", referring to the microSD card), and select the zip or zips (in the proper order) that you want to flash. Then flash them, wipe cache/dalvik, and reboot.
I wouldn't stay on a stock ROM if I were you. You might avoid getting the OTA, but you're guaranteed to avoid it by running a custom ROM. JasmineROM seems to be the go-to ROM for stability, but hsbadr's CM13 builds are very functional.
Click to expand...
Click to collapse
I might add to that storing a copy of that backup on another device... your desktop computer, perhaps, so that if something really goes bad and wipes your sd card, you still have a backup.
Do not, no matter how much your phone nags you to, take an OTA now that you're rooted. The odds are good that they've closed the exploit used to get root.
If you're looking for stability, Jasmine ROM is the best that I've tried. It's not being supported anymore, but it really doesn't need it. Everything works. I froze, then deleted every single Samsung and Google app that I don't use and it is just smooth.
CM 13? The last I looked, the camera doesn't work well, Bluetooth is problematic, you can't set your sd card as internal storage and a few other niggling issues. I've been doing this since my Droid Incredible and have found that ROMs ported from other devices will have issues until the developers marry the software to the hardware. I'm now waiting for the official Marshmallow to drop and let the developers take a crack at it.
joshw0000 said:
I'm about 90% sure the MM update will come with a new bootloader (a locked one). I highly advise against trying to accept it if/when it comes. Someone here will tear it apart and make odin flashable images to get us on 6.0.1 TW rom. Until then, flash TWRP and CM13. I've been using it daily and it's one of the better CM roms I've used on any device.
Also look into Dual Boot Patcher so you can crack flash roms without affecting your primary one.
Click to expand...
Click to collapse
Dual boot patcher has worked pretty reliably for me. Just be sure to thoroughly read the directions to make doubly sure that nothing goes wrong.
douger1957 said:
CM 13? The last I looked, the camera doesn't work well, Bluetooth is problematic, you can't set your sd card as internal storage and a few other niggling issues. I've been doing this since my Droid Incredible and have found that ROMs ported from other devices will have issues until the developers marry the software to the hardware. I'm now waiting for the official Marshmallow to drop and let the developers take a crack at it.
Click to expand...
Click to collapse
Bluetooth is flawless. I can't see why anyone would set their sd card as internal (defeats the point of being able to move info between other phones and/or computers). Camera works very well (for CM). I've had very few issues with taking pictures. Recording video doesn't work for me. I've modded every phone I've used (I've owned many that I wouldn't carry due to no root) since the Eris and this is IMO the best CM port ever.
Sent from my SM-N910V using Tapatalk
I am using PaulPizz 5.1.1 ROM and it's working almost flawlessly. I'm happier than ever with this phone. I want to wait for the OTA 6.0.1 to hit and the teardown of that to begin before I switch.
I'll look into dual boot.

Categories

Resources