Hi all,
i hope someone knows this problem:
Odin will hang on every rom i try to install it always stops when it must download something:
here the log files of 2 different roms i try'd to install:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
Click to expand...
Click to collapse
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> partition.bin download..
Click to expand...
Click to collapse
as you can see both stops when they try to download something...
i used different pc's and different usb ports
even try'd on another network to see if the router wasn't blocking anything
hope some one can help me out here
Related
i am from mexico and sorry if the translation is bad because I'm using a translator. my problem is that I was trying to update my SG3 by odin multi downloader with i5800xxjpm firmware, but there is a problem near the end of the process:
----------------
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V2, P9,R2
<1> START!!!
<1> set download environment.
<1> logo.png download..
<1> 1/6 Finished.
<1> zImage download..
<1> 2/6 Finished.
<1> factoryfs.rfs download..
<1> 3/6 Finished.
<1> datafs.rfs download..
<1> 4/6 Finished.
<1> cache.rfs download..
<1> 5/6 Finished.
<1> modem.bin download..
-------------------------
not because it has finished downloading is modem.bin file to my phone. "someone over to him Occurred this problem?
something hapens to me aswell when i try flashing XXjpm (the one with multiple tar files) odin crashes after loading the third or four .tar
Make sure you are using correct tar file and connect the phone after starting up odin......
SEnt frOM mY GalAxY 3
ive done it several times... it is strange becouse i flashed jpm 2 times before using the same files and same odin
Hey ! i got a problem out there. When im trying to flash a rom into my device (galaxy 3) i got this after 2 minutes and nothing hapens in any time...
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
I waiteh half an hour but nothing happened wheres the problem ??? stock rom sucks...
PLEASE HELP
Can you give us some more details ?
Have you put your phone in Download Mode ? Have you tried to re-install the drivers on your computer ?
Just reflash ^^
Try Re-installing drivers
or check the USB port n give little more detail if u still face it
androidaz5800 said:
Hey ! i got a problem out there. When im trying to flash a rom into my device (galaxy 3) i got this after 2 minutes and nothing hapens in any time...
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
I waiteh half an hour but nothing happened wheres the problem ??? stock rom sucks...
PLEASE HELP
Click to expand...
Click to collapse
put your phone in download mode and connect it with usb to our pc and you must me sure that the files are coorect and if it is a single tar file you must check one package box and fire up tour odin
happy flashing
I was trying to flash my G3 with Kyorarom 0.4.0 but Odin doesn't seem to progress beyond this point:
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V2, P9,R2
<1> START!!!
<1> set download environment.
[B]<1> big partition size!![/B]
<1> logo.png download..
This is the first time I've encountered "big partition size!!" in Odin.
I tried removing the SD card as well as SIM too. No change. Hitting the same block. Any help?
Problem resolved. Had to download it again. Had fiddled with the original downloaded tar file.
Hi guys!
I've got a stock samsung i9001 with root.
when i attempted to flash feamod 1.2 via odin it stopped to
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
after 6 minutes i disconnected di USB and odin adds in the log:
Code:
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
the phone is ok but what is the problem? i followed the guide in this section
yesterday when i was trying to flash my device, so i put my phone on download mode and i connected it with my pc. then, when i started te flash with odin the process gets stucked in setup connection, exactly this message
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
what is happening? how can fix it?
thank you
lovenduro said:
<1> setup connection...what is happening? how can fix it?
Click to expand...
Click to collapse
shut down KIES, when you run Odin , look at solutions in My Android Solutions