Related
I have a Nook Color. Somehow (and I really can't recall how), I can no longer get to the B&N side of my Nook. Even with the micro-SD out, I still go directly into CYANOGEN. To make matters worse, every single app I try to get from the market will not download. Once I 'Accept & download', the app starts to download then I get an Error overlay screen: "name-of-software" could not be downloaded due to an error.
So I have a V--E--R--Y generic tablet that can't do much. Please help.
Thanx in advance...................................
How did you go about installing CM7? Did you install it to the internal storage?
Please help!!! Noobie messed up NC (big time)
That's part of the problem. I did not consciously install to internal memory, I wanted it to boot from the SD card.
That's what I did...
That's what I did once. I unwittingly installed it onto the internal memory. It also happened to be really buggy. I restored it to stock using Clockworkmod Recovery. Did you use the installer for the SD card?
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card.
I put the ZIP file for: gapps-gb-20110828-signedgapps-gb-20110828-signed, and gapps-gb-20110828-newtalk-signed.
I tried the home-power key combo. It asks me if I'm sure that I want to restore to the factory. I say "Yes" but when the Nook starts up, I'm still in cyanogen mod.
Should I (re-)format the MicroSD, write 1gb_clockwork-3.2.0.1-eyeballer (or another version) then move recovery-clockwork-3.2.0.1-encore?
Aside from not being able to get back to B&N-supplied software, I can't do anything with the NC as an Android tablet.
OP, do you intend to install CM7 into the internal memory?
All I'm trying to accomplish is to get back to the factory NC settings. Once I can get there, I'll decide.
How to hard reset and Factory Default Nook Color - http://goo.gl/pSFui
Power down your NC. Wait approximately 10 seconds or so-- just give it a bit of a break between shut down and factory reset.
Press and hold power button and your "N" home button almost simultaneously-- press Power first and then the N.
Hold these until your screen flashes the "Touch the future of reading" message; hold for a second or two afterward, then release. You will then get a prompt asking if you want to reset your nook to factory. Press the home button to continue. It will ask you to confirm. Press the home key again. Your nook will deregister, reset, and when it reboots, you will see "Kate" in her tutorial video, as if you'd never registered it in the first place.
(Obviously your account info will still be valid-- simply register with your email/pw combo instead of creating a new account.)
Hope this helps- if so please click thanks
Sent from my MB860 using XDA App
I did this (more than once - grrrrrrrrrrrrr!). I never see the "touch the future....." message. Instead, I get a cyanogen mod 7 screen with the message "Booting into Recovery". Then I get a sickly yellow-greenish screen that asks (twice) if I want to teset. I confirm both times then it "wipes" the data. It then boots into a cyanogen mod 7 screen (and the skateboarding 'droid) and I go through the registration process.
Now, when I select a Google app, the downloading (Google Maps) seems to be taking forever, but at least I'm not getting the error I got before.
Also, I do not see the progress of the download that I'm used to seeing on my phone. All I see is "movement" under the "Downloading..." message. How long do I leave it before I abort the download?
Your micro sd card is removed right?
Sent from my MB860 using XDA App
mike11050 said:
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card.
I put the ZIP file for: gapps-gb-20110828-signedgapps-gb-20110828-signed, and gapps-gb-20110828-newtalk-signed.
I tried the home-power key combo. It asks me if I'm sure that I want to restore to the factory. I say "Yes" but when the Nook starts up, I'm still in cyanogen mod.
Should I (re-)format the MicroSD, write 1gb_clockwork-3.2.0.1-eyeballer (or another version) then move recovery-clockwork-3.2.0.1-encore?
Aside from not being able to get back to B&N-supplied software, I can't do anything with the NC as an Android tablet.
Click to expand...
Click to collapse
Eyeballer is a clockwork recovery bootable SD image which is used to install stuff (e.g. CM7) to internal memory.
http://forum.xda-developers.com/showthread.php?t=1030227
VeryGreen (size agnostic thread) is the SD image which creates a full OS on the SD card itself leaving the internal memory alone.
http://forum.xda-developers.com/showthread.php?t=1000957
You have used the Eyeballer method and have therefore done an internal install. You must also have installed a CM7 zip not just the gapps zip as they are just google apps and not an actual ROM.
You have 2 ways forward.
The simplest is if you want to end up with internal CM7 and are not interested in running the B & N ROM. Start again by creating the Eyeballer SD card using win32diskImager. Make sure you use a real USB SD adapter and not a card slot on a laptop. Put onto the card the CM7 ROM zip. I recommend the one from the KANG MiRaGe thread in the development forum. It is the most up to date and stable version available at the moment. Also put on one gapps zip (20110828). Now put the card in Nook, Power up and when in recovery then use the menus to format system, data and cache. Do NOT format boot. Then flash the CM7 ROM zip, then the gapps zip. Power down and prepare a clean SD card either by reformatting the eyeballer card with something like the HP USB card utility or a partition manager in the PC like miniTools. You could also use a different SD card if you want to keep the eyeballer one for future use. Put the card back in, power up and you should now be in a stable CM7 environment where you can set up wifi, register with the Google market and download apps.
The second way if you really want to return to stock on the internal and run CM7 of the SD card then use the eyeballer method but instead of flashing CM7 and gapps you now use a return to stock zip. Make sure you still format the partitions as before.
http://forum.xda-developers.com/showthread.php?t=914690
Once you have it back to stock and upgraded to whatever stock you want then follow the VeryGreen method from the link above. Once the SD card has put CM7 on itself, do not worry that there is only a 114MB space if you ever put the card back in the PC. That is normal; it is just the boot partition that the PC sees. The rest of the card can be seen if you USB connect the Nook to the PC.
Yes it is. Also, even though I'm not getting an error, no apps are loading.
You absolutely rock!!!!!!!!!!!!!!
I'm back at the NC "baseline". I tried to go back to a 1.2 (which is what it came with) using "update-nc-stock-1.2-signed". Once I re-booted, it kept returning to the NOOK COLOR screen. Then I used a 1.0.1 from your last post. It came back fine with 2 exceptions. 1) I now have a message that I need to install a SD card. When I do, my (Windows Explorer) "Computer" screen only recognizes the SD card and not the Nook. These are piddly little issues, but if I can get them fixed, great! (Right now, I cannot upgrade the NC or move any books or load any apps.
Thanks again!!!!!!!!!!!!!!!
mike11050 said:
That's part of the problem. I did not consciously install to internal memory, I wanted it to boot from the SD card.
Click to expand...
Click to collapse
I had this same problem. Since I am a new member, and can't post links, I'm going to try to help.
Install Clockwork Recovery to an SD card. Yes, the same way you did when installing clockwork to the SD the first time.
There are some threads on other fourms (google is your friend) that have links to Update files that allow you to update while keeping clockwork recovery, and some that will remove clockwork recovery. If you can remove the SD card and boot into the Stock Nook OS, then don't worry about installing 1.0.0 or 1.0.1 like some of the forms say. Just place the .ZIP file of the hacked update (usually 1.3 or 1.4 I think) into the root folder of the SD card, then Install it on your NC just like installing CM7 onto the internal memory. Your nook should start working again. It restored mine to full functionality. I can now pay 3 Dollars for angry birds, but at least its not as terribly slow and laggy as it was with CM7.
mike11050 said:
You absolutely rock!!!!!!!!!!!!!!
When I do, my (Windows Explorer) "Computer" screen only recognizes the SD card and not the Nook. These are piddly little issues, but if I can get them fixed, great! (Right now, I cannot upgrade the NC or move any books or load any apps.
Thanks again!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
I had the same issue last weekend, somehow my internal memory had become unrecognizable to anything, and the local Barnes and Noble store had a SD card that repartitioned the internal memory, and I was back in business. And as an added bonus I now have the 4 GB app/BN partition and the 1 GB mostly useless partition.
mike11050 said:
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card. ...
Click to expand...
Click to collapse
The instructions I see when googling around where I see that image mentioned are instructions for installing onto the Nook Color internal memory.
In the simplest case, making an n2a card is much less complicated than that ~ all you need is on the PC, write the size agnostic image, then drop in the CM7 build you want to use, then put the card in the Nook and it creates itself. There are upsides and downsides to different n2a methods, but that one seems to be the easiest ~ I've done it successfully several times, and I'm certainly nothing like an expert when it comes to these Android systems.
A recovery card image will make a bootable recovery card ... and while that might not have been what you needed to get what you want, its what you need to get the nook back to stock.
You might want to go to
http://forum.xda-developers.com/showpost.php?p=22809801&postcount=148
... to get a version of the 1.4.1 upgrade that your recovery card can install. You'll probably have to wipe all sorts of partitions, which means you'll have to sign in with the B&N store again and you'll get to download you B&N apps again, but that's pretty straightforward.
This OP in this thread:
http://forum.xda-developers.com/showpost.php?p=10623716&postcount=1
... says that it will be necessary to format ("wipe") the /data and /system partitions, but it doesn't seem like you'll lose anything you want to keep. After all, you've either overwritten or completely tangled up your stock B&N info.
That post above has 1.4.1. There should be a signed 1.4.2 lying around somewhere, but if not, once its back to stock, you can update to 1.4.2 the normal way, download the B&N update file, drop it in the root of the Nook, make sure its at least 30% charged, and let it go to sleep, which will run the update file.
Hello XDA fourms, i have just today bought a nook color. I have been researching rooting it so i can read my manga and comics on it. I have decided to root it through a micro sd 4gb card so that if i want to use my nook regularly i can. now the problem is i can not understand half the things people say to do to achieve rooting my Nook color. can any one help me or redirect me to an easy place to teach me how to do this?
That's exactly how I started out. You can find instructions on the "[ROM][CM7] [v1.3] Size-agnostic SD Card image and CM7 installer for SD Cards." thread in the "Nook Color Android Development" forum. I'm no Android expert, being more a console Linux & C/Forth kind of guy, but it worked for me.
Since I spent most of my time in stock and only had a few apps I actually used on the card, I ended up rooting the stock nook with a manual nooter to install those apps in the Nook Color stock home page ... but using the SD card install for a month was quite useful in working out whether I wanted to root the stock B&N firmware or install a CM7 firmware instead.
ok so i tried to make an sd card out of my 4 gb but it didnt work so i decided to reformate it and now it only has 117 mb! wth? im so confused...
Tom32090 said:
ok so i tried to make an sd card out of my 4 gb but it didnt work so i decided to reformate it and now it only has 117 mb! wth? im so confused...
Click to expand...
Click to collapse
when you write the image to the SD card the partition is 117mbs. windows can only see that partition (there is actually 4 on the card after the image is written) that's why when you hit reformat it reformatted it to 117mbs. boot your nook up into stock form with the SD card in it, then go into your settings and hit "unmount SD card" then hit "reformat". That'll get you back to 4gbs.
ok great! ill try that thank you very much! but now how do i get it rooted?
If you "want to root it through a micro sd 4gb card so that if i want to use my nook regularly i can" ... you aren't really rooting the device, you are just making an SD card that will boot up its own system and leave the stock system in the built-in flash alone. Then if the card is pulled out (or replaced with a non-bootable SD card), the bootloader skips the SD card and boots from the internal flash.
If you are using a Windows box, as nook711 explained, the regular Windows format will not change existing SD partitions, so it will just format one relatively small partition on the SD card. To reformat back to a single clean SD partition on the Windows side, google for Panasonic SDFormatter.
As far as how to get that card to work as an SD-boot card ~ its hard to say, since you didn't say what went wrong the first time you tried it: which imager program did you use? did you power the Nook down all the way before rebooting it? Did it hang, or did it fail to boot and start up as a stock Nook Color?
Unless of course I misread you: if you want to root it using a SD card in a way that allows it to also be used as a regular Nook ~ that is, the third party apps show up in what looks like a regular B&N Home page ~ that is a manual noot you want to do. The instructions for doing a manual noot are in the "[NC][1.2][1.3] ManualNooter 4.6.16" thread. However, those are instructions for a 1.2 or 1.3 version. Instead of using the manualnooter file described in the opening post, skip ahead to page 175, and look for GMPOWER's post #1745. The "LINK" downloads a manualnooter file that seems to work for a stock Nook Color 1.4.1 ~ at least, that's the one I've used and now I have what looks like a stock Nook Color, except with Crackle, Crunchyroll, YouTube, OpenIntents and DolphinMini apps showing up on the B&N home pages.
BruceMcF said:
If you "want to root it through a micro sd 4gb card so that if i want to use my nook regularly i can" ... you aren't really rooting the device, you are just making an SD card that will boot up its own system and leave the stock system in the built-in flash alone. Then if the card is pulled out (or replaced with a non-bootable SD card), the bootloader skips the SD card and boots from the internal flash
If you are using a Windows box, as nook711 explained, the regular Windows format will not change existing SD partitions, so it will just format one relatively small partition on the SD card. To reformat back to a single clean SD partition on the Windows side, google for Panasonic SDFormatter.
As far as how to get that card to work as an SD-boot card ~ its hard to say, since you didn't say what went wrong the first time you tried it.
Click to expand...
Click to collapse
so what happen on my first try was i used winimage to write the genertic sd card file on to it. i than put update-cm-7.1.0-encore-signed.zip on the card. my nook was off and i turned it on. it did not boot from the sd card. i have not tried holding the n button to see if that worked yet. i do have the sd card formatted and i have already formatted the card back to 4 gb. Next i was going to do the same steps but try and hold the n button
update:so i tried the N button but it didnt boot the sd card... i just dont know what im doing wrong!?
if it did not boot from the sdcard then I would suspect that the image did not write to the sdcard correctly. the nook will automatically look at the sdcard boot first.
did you unzip the image file before writing it to the card?
did you write the image as admin in the winimage?
After writing the image to the sdcard remove it from your computer and then plug it back in the computer, if it wrote correctly it should now say "boot"
"my nook was off and i turned it on. it did not boot from the sd card"
It only boots if it is turned on from a powerdown. If it just went to sleep to save the battery, and a quick tap of the power button can wake it up, its not powered down, its only sleeping.
When its awake, hold the power button, wait for the "do you want to turn it off completely" dialog, keep holding the power button, and it will turn off. That is a complete power down. Then put in the bootable SD-card, and hold the power button until it turns on ~ it ought to boot off the card instead of off the Nook internal flash.
Like any Android device, it will take a while to go from the boot screen to the home screen on the first power-up, but you'll see the skaterboy droid in a couple of minutes and know that its grinding through the process of setting up the CM7 system.
And regarding the CM7 update file ~ looking in my PC file system, that's the same CM7 update file I used.
nook711 said:
After writing the image to the sdcard remove it from your computer and then plug it back in the computer, if it wrote correctly it should now say "boot"
Click to expand...
Click to collapse
it does say "boot" but it still does not work
BruceMcF said:
"my nook was off and i turned it on. it did not boot from the sd card"
It only boots if it is turned on from a powerdown. If it just went to sleep to save the battery, and a quick tap of the power button can wake it up, its not powered down, its only sleeping.
When its awake, hold the power button, wait for the "do you want to turn it off completely" dialog, keep holding the power button, and it will turn off. That is a complete power down. Then put in the bootable SD-card, and hold the power button until it turns on ~ it ought to boot off the card instead of off the Nook internal flash.
Like any Android device, it will take a while to go from the boot screen to the home screen on the first power-up, but you'll see the skaterboy droid in a couple of minutes and know that its grinding through the process of setting up the CM7 system.
And regarding the CM7 update file ~ looking in my PC file system, that's the same CM7 update file I used.
Click to expand...
Click to collapse
Yes i did shut it off and than turned it on but is still does not work?
i have also been looking at video on youtube. but every single one tells me something different. so far the one i found that seems to be the closest to what im trying to do is this one http://www.youtube.com/watch?v=P4nenR-mNo0 but even so i feel like the more i watch the more confused i get
There are only three things that come to my mind:
(1) What is the make and class of the microSD card? That's not from personal experience, but it shows up in multiple HowTo guides, both here and on other sites. I used a Kingston Class 4 8gb microSD card, but the preference seems to be for SanDisk Class 4.
(2) A generic image is likely to work best if its written onto a "like new" fully formatted SD card ~ I have seen a few YouTube clips of various rooting efforts where formatting it with the Panasonic SDFormatter Windows executable succeeded after the prior effort had failed.
Edit: the YouTube clip you posted is the first one where I saw advice to use the Panasonic SDFormatter. However, other than that, I mostly followed the xda How-To.
I'd note that even though the the CrashTechDummies YouTube clip is from April, 2011, they are using a HowTo guide for a image that is older than the "size-agnostic" image in the "Size-agnostic" How To guide, so they have to do several things by hand that are handled automatically by the "Size-agnostic" image.
(3) What is your hardware for writing SD images? USB-port card writers sometimes need to be safe-unmounted with the USB unmount tool before popped out. I've run into that before in a different context.
If its not one of those, then I got nothing, sorry. The part between copying the CM7 file onto the generic image and seeing the CM7 droid skaterboy "just worked" for me.
BruceMcF said:
There are only three things that come to my mind:
(1) What is the make and class of the microSD card? That's not from personal experience, but it shows up in multiple HowTo guides, both here and on other sites. I used a Kingston Class 4 8gb microSD card, but the preference seems to be for SanDisk Class 4.
(2) A generic image is likely to work best if its written onto a "like new" fully formatted SD card ~ I have seen a few YouTube clips of various rooting efforts where formatting it with the Panasonic SDFormatter Windows executable succeeded after the prior effort had failed.
(3) What is your hardware for writing SD images? USB-port card writers sometimes need to be safe-unmounted with the USB unmount tool before popped out. I've run into that before in a different context.
If its not one of those, then I got nothing, sorry. The part between copying the CM7 file onto the generic image and seeing the CM7 droid skaterboy "just worked" for me.
Click to expand...
Click to collapse
ok i reformatted it with Panasonic reformat and i am using a 4 gbsandisk micro sd and it has a 2 with a circle around it
Tom32090 said:
i have also been looking at video on youtube. but every single one tells me something different. so far the one i found that seems to be the closest to what im trying to do is this one http://www.youtube.com/watch?v=P4nenR-mNo0 but even so i feel like the more i watch the more confused i get
Click to expand...
Click to collapse
there's lots of ways to get to the end result, don't get confused we will help you through the process.
Now that being said:
This was my process
* reformat your SD card again using the stock nook
* download "windisk32 image writer" (easier I think then winimage)
* download "verygreens, genenric 1.3image.zip"
* unzip the image.zip to your desktop (using 7zip)
* open windisk32, click the blue folder and find the image file on your desktop for generic 1.3
* select your corresponding drive to your sdcard hit write
*when finished remove sdcard and reinsert it into computer
* download (cm7.1 or cm7.2)
* open up " my computer" on windows
* drag "cm7.1 or 7.2" to the corresponding drive for sdcard (should say boot)
* when finished right click hit eject when safe to do so remove sdcard
* insert sdcard into fully powered down nook
* turn nook on (after a few it should go to a little Linux penguin) and install scripts should be running
* when it's done it'll power off
* wait a few minutes and turn the nook on, should boot into cm7 but first you should see the android riding a skateboard.
*while that's working download the gapps file
after you set up cm7 for the first time, shut it down.
* remove sdcard and reinsert it into your computer
* open up "my computer" and drag the gapps file to the sdcard drive
* when finished hit eject and reinsert the card into the nook and while holding the "n" power up the nook (should see the little Linux penguin again)
* when its finished it should power down againbthen just turn it on and set up Google
hope this helps
** again this is just what works for me and I have successfully done several different nook for friends, family and myself.
uh is there any way you could supply some links ? i mean i think i have alot of these things but iv been gathering it from doing reaserch so i justwant to make sure i have the right files
Tom32090 said:
uh is there any way you could supply some links ? i mean i think i have alot of these things but iv been gathering it from doing reaserch so i justwant to make sure i have the right files
Click to expand...
Click to collapse
verygreens image:
forum.xda-developers.com/showpost.php?p=12240928&postcount=1
windisk32:
www.askvg.com/win32-disk-imager-write-any-bootable-image-to-usb-drive-in-windows/
7zip:
download.cnet.com/7-Zip/3000-2250_4-10045185.html
nook711 said:
there's lots of ways to get to the end result, don't get confused we will help you through the process.
Now that being said:
This was my process
x reformat your SD card again using the stock nook
x download "windisk32 image writer" (easier I think then winimage)
xdownload "verygreens, genenric 1.3image.zip"
xunzip the image.zip to your desktop (using 7zip)
xopen windisk32, click the blue folder and find the image file on your desktop for generic 1.3
xselect your corresponding drive to your sdcard hit write
xwhen finished remove sdcard and reinsert it into computer
x download (cm7.1 or cm7.2)
x open up " my computer" on windows
xdrag "cm7.1 or 7.2" to the corresponding drive for sdcard (should say boot)
xwhen finished right click hit eject when safe to do so remove sdcard
xinsert sdcard into fully powered down nook
xturn nook on (after a few it should go to a little Linux penguin) and install scripts should be running
x when it's done it'll power off
* wait a few minutes and turn the nook on, should boot into cm7 but first you should see the android riding a skateboard.
*while that's working download the gapps file
after you set up cm7 for the first time, shut it down.
* remove sdcard and reinsert it into your computer
* open up "my computer" and drag the gapps file to the sdcard drive
* when finished hit eject and reinsert the card into the nook and while holding the "n" power up the nook (should see the little Linux penguin again)
* when its finished it should power down againbthen just turn it on and set up Google
hope this helps
** again this is just what works for me and I have successfully done several different nook for friends, family and myself.
Click to expand...
Click to collapse
Ok so i have gotten up to the part where it shutdown and i have no restarted it yet. I downloaded the gapps and now i have another question. if i want to open up the memory on the sd card that isnt being used willl it mess anything up? the video talks about using MiniTool Partition Wizard Home Edition 5.2 and i just dont want to mess up anything iv already down
Tom32090 said:
Ok so i have gotten up to the part where it shutdown and i have no restarted it yet. I downloaded the gapps and now i have another question. if i want to open up the memory on the sd card that isnt being used willl it mess anything up? the video talks about using MiniTool Partition Wizard Home Edition 5.2 and i just dont want to mess up anything iv already down
Click to expand...
Click to collapse
the unseen portion of the sdcard in windows will be seen in your nook
nook711 said:
the unseen portion of the sdcard in windows will be seen in your nook
Click to expand...
Click to collapse
ok so if i want to put thing on the card how would i do it? would my computer pick up the unused memory?
Tom32090 said:
ok so if i want to put thing on the card how would i do it? would my computer pick up the unused memory?
Click to expand...
Click to collapse
you can use the nook as a mass USB storage device. while on the nook plug the cord into your nook and then the USB side into your computer. the computer should pick it up as USB mass storage and show 2 drives, 1 for nook color and the other for sdcard. once connected you can put whatever you want on it.
so i have cm 7.3.0-encore installed and
1) i cant get the android apps to install
2)cm mod( rom manager 4.2.0.2 clockwork mod 3.2.0.1) will not let me updgrade to premium
when i try to download rom it tells me i must upgrade rom manager to latest version and when i press ok i get another box that says "the application ROM Manager process com.koushikdutta.rommanager) has stopped unexpectedly please try again" and when i press ok i get sent bact to the home screen.
3)when i try to reboot into recovery,1) with the sd card in,i get booted to the main cyanogen mod home screen
4) and when i try to install gapps i go into the recovery,/install zip from sd card/choose zip from sd card/confirm install/when it says install complete,i exit out(reboot system now)it goes back to the main nook color screen so i have to power the nook off and back on so it can boot into cm. once back in cm,i dont have any market.
Oh and my software version is 1.2.0
PLEASE HELP!!
As much as I or we want to help you, we are completely lack of info.
Please provide some basic info about your system and what you are trying to do.
1. Where did you get cm7.3.0?
2. On your very last sentence, 1.2.0. What is that?
3. How have you run "which ROM"? from eMMC or uSD?
Those info is a good start to get more help.
votinh said:
As much as I or we want to help you, we are completely lack of info.
Please provide some basic info about your system and what you are trying to do.
1. Where did you get cm7.3.0?
2. On your very last sentence, 1.2.0. What is that?
3. How have you run "which ROM"? from eMMC or uSD?
Those info is a good start to get more help.
Click to expand...
Click to collapse
i hvae to pull up the site i got the mod from (i believe it was the cyanogen forum,ill get back to you on that)
2 1.2.0 is the stock nook firmware.(i believe they are up to 1.4 now)
3 i have no idea what your talking about.(im hoping your asking wether im running from internal or sd card. if that is the case,im running from the sd card
OK... to help you there are several things we must know... since answers to each can influence the method we need to get things working as they should:
1. Which method did you use to setup your SD? i.e. verygreen's SASD, racks11479 or another method.
2. Which ROM are you having issues with? i.e. CM7 on SD, Stock 1.2 on eMMC
3. What "android apps" are you having issues with? i.e. google apps (gApps) or another specific "android" app... since they are ALL android apps.
If you used verygreen's SASD then you CANNOT use the stanard ROM manager and CWM to install gApps... you have probably screwed up your stock system and installed gApps there... not that it will work... but you are now no longer "stock"
If you can answer these questions and elaborate as to exactly what you have done, and are trying to accomplish, we can provide informed suggestions to you... otherwise we can flood this thread with a TON of solutions that will EVENTUALLY work... but waste lot of time and cause you much frustration along the way.
DizzyDen said:
OK... to help you there are several things we must know... since answers to each can influence the method we need to get things working as they should:
1. Which method did you use to setup your SD? i.e. verygreen's SASD, racks11479 or another method.
2. Which ROM are you having issues with? i.e. CM7 on SD, Stock 1.2 on eMMC
3. What "android apps" are you having issues with? i.e. google apps (gApps) or another specific "android" app... since they are ALL android apps.
If you used verygreen's SASD then you CANNOT use the stanard ROM manager and CWM to install gApps... you have probably screwed up your stock system and installed gApps there... not that it will work... but you are now no longer "stock"
If you can answer these questions and elaborate as to exactly what you have done, and are trying to accomplish, we can provide informed suggestions to you... otherwise we can flood this thread with a TON of solutions that will EVENTUALLY work... but waste lot of time and cause you much frustration along the way.
Click to expand...
Click to collapse
heres what i did step by step
1) got a sandisk 16gb micro sd card and fomatted it to fat 32.
2) used win image to burn generic sd card image to the sd card
3) once burned, i put cm7.3.0 encore zip file in the root of the sd card
4) put sd card in nook
5) let the install run
thats pretty much it it will not let me update the rom manger or install gapps
im trying to include pics of my rom manager and settings screens
so i have the cm mod running i just want to be able to install gapps and upgrade my rom manager
bigicedog said:
heres what i did step by step
1) got a sandisk 16gb micro sd card and fomatted it to fat 32.
2) used win image to burn generic sd card image to the sd card
3) once burned, i put cm7.3.0 encore zip file in the root of the sd card
4) put sd card in nook
5) let the install run
thats pretty much it it will not let me update the rom manger or install gapps
im trying to include pics of my rom manager and settings screens
so i have the cm mod running i just want to be able to install gapps and upgrade my rom manager
Click to expand...
Click to collapse
First off, you are running CM7.0.3, NOT 7.3 since it is not exist.
Secondly, I start following this post of yours. Pls note, whatever you did or have done described in your very first post were totally screw. Don't know who show you that.
Anyway,
Let's put it this way.
1. Your device is NC (NOOKColor)
2. Your NC is running stock ROM version 1.2.0 on eMMC.
3. You want to run CM7.0.3 on external uSD card.
4. You have problem getting Android apps.
Right? OK
1) got a sandisk 16gb micro sd card and fomatted it to fat 32. => good
2) used win image to burn generic sd card image to the sd card.
Ans: I strongly suggest you getting the Win32DiskImager since a lot of members reported having issue with WinImage.
3) once burned, i put cm7.3.0 encore zip file in the root of the sd card.
Again. It is CM7.0.3.
Assume after successfully done creating a bootable uSD using Win32Diskimager, put your cm7.0.3 (or suggesting using CM7.2-RC KANG) into the root folder, where you see those mlo, ramdisk, ... file. It should only 4 files there at this time.
4) put sd card in nook => correct
5) let the install run => it should
6 - after successfully install, it will automatically delete the cm7.0.3 zip file then shutdown.
7 - remove the uSD, put back into PC, download and copy GApps and put it the root folder, same place where you just put the ROM before.
Link: http://wiki.cyanogenmod.com/index.php?title=Latest_Version
Note: rolling all the way down and select one for CM7, not CM9
8 - remove the uSD off PC, put it back into the NC, power it up
9 - let it boot into CM7 first, do connect to your wifi at this point is a good choice, then reboot and choose reboot into recovery using the menu.
10 - after it boots back into recovery, it will install the GApps now and shutdown again.
11 - reboot and start using.
NOTE: the way I show you above is the easiest way. There are several ways that are so good and too convinience but it's far more advance for newbie. When you get used to the NC, you will find out more.
This link is very helpful:
http://forum.xda-developers.com/showthread.php?t=1000957
votinh said:
First off, you are running CM7.0.3, NOT 7.3 since it is not exist.
Secondly, I start following this post of yours. Pls note, whatever you did or have done described in your very first post were totally screw. Don't know who show you that.
Anyway,
Let's put it this way.
1. Your device is NC (NOOKColor)
2. Your NC is running stock ROM version 1.2.0 on eMMC.
3. You want to run CM7.0.3 on external uSD card.
4. You have problem getting Android apps.
Right? OK
1) got a sandisk 16gb micro sd card and fomatted it to fat 32. => good
2) used win image to burn generic sd card image to the sd card.
Ans: I strongly suggest you getting the Win32DiskImager since a lot of members reported having issue with WinImage.
3) once burned, i put cm7.3.0 encore zip file in the root of the sd card.
Again. It is CM7.0.3.
Assume after successfully done creating a bootable uSD using Win32Diskimager, put your cm7.0.3 (or suggesting using CM7.2-RC KANG) into the root folder, where you see those mlo, ramdisk, ... file. It should only 4 files there at this time.
4) put sd card in nook => correct
5) let the install run => it should
6 - after successfully install, it will automatically delete the cm7.0.3 zip file then shutdown.
7 - remove the uSD, put back into PC, download and copy GApps and put it the root folder, same place where you just put the ROM before.
Link: http://wiki.cyanogenmod.com/index.php?title=Latest_Version
Note: rolling all the way down and select one for CM7, not CM9
8 - remove the uSD off PC, put it back into the NC, power it up
9 - let it boot into CM7 first, do connect to your wifi at this point is a good choice, then reboot and choose reboot into recovery using the menu.
10 - after it boots back into recovery, it will install the GApps now and shutdown again.
11 - reboot and start using.
NOTE: the way I show you above is the easiest way. There are several ways that are so good and too convinience but it's far more advance for newbie. When you get used to the NC, you will find out more.
This link is very helpful:
http://forum.xda-developers.com/showthread.php?t=1000957
Click to expand...
Click to collapse
so i did everything and most of i went as planned until.....
10) i pressed the power button to power off and pressed reboot( i got 3 choices 1-reboot,2-recovery 3-bootloader) i pressed recovery and it rebooted back into cm7. so i powered down the nc,took the sd card out and powered on it went to the stock nc menu. so i re-inserted the sd card and rebooted through the clockwork mod menu,once again it booted into the cm7 without installing gapps, so i once again powered down took out the sd card,powered up.it finnaly booted into recovery so i inserted the sd card(again) went down to "install zip from sd card,choose zip from sd card chose gapps-gb-20110828-signed.zip.installed it said install from sd card complete chose reboot system now. it booted into stock nook.so i powered off and back on into cm7 just to find out GAPPS DID NOT INSTALL. so im at the point where im just gonna get a n2a premade card or something. but i do want to say to say THANK YOU TO EVERYBODY FOR YOUR HELP
bigicedog said:
so i did everything and most of i went as planned until.....
10) i pressed the power button to power off and pressed reboot( i got 3 choices 1-reboot,2-recovery 3-bootloader) i pressed recovery and it rebooted back into cm7. so i powered down the nc,took the sd card out and powered on it went to the stock nc menu. so i re-inserted the sd card and rebooted through the clockwork mod menu,once again it booted into the cm7 without installing gapps, so i once again powered down took out the sd card,powered up.it finnaly booted into recovery so i inserted the sd card(again) went down to "install zip from sd card,choose zip from sd card chose gapps-gb-20110828-signed.zip.installed it said install from sd card complete chose reboot system now. it booted into stock nook.so i powered off and back on into cm7 just to find out GAPPS DID NOT INSTALL. so im at the point where im just gonna get a n2a premade card or something. but i do want to say to say THANK YOU TO EVERYBODY FOR YOUR HELP
Click to expand...
Click to collapse
Did I just said whatever you did or have done, described on your very first post were screw up?
Why would you do that?
You follow to step 10, you are very close to get it up and running then you continue to do the wrong way. That's why you can't get your NC work.
On which instruction you got that shows you doing the "went down to "install zip from sd card,choose zip from sd card" when you are running CM7 from uSD?
My suggestion, start over again, go slow.
Since using the uSD, why not using the stable CM7.1 or CM7.2 KANG? Get rid of the 7.0.3
I've worked ever so hard trying to configure and get the aesthetics of my cm7 rom up and running and apps in my testing might have triangulated and caused this error, I don't know.
Whenever I try to install a rom, boot into recovery, do a backup-- basically my clockwork is broken. Not broken, it still tries. It just pops this up on the screen:
Populating /dev using udev: done
Initializing random number generator....done
modprobe: chdir (2.6.32.9): No such file or directory
Starting network...
Detected Standard B&N nook layout, emmc first
It appears the SD card is already properly formatted
Skipping format
Mounting /dev/mmcblk1p1 as /boot
Looking for the install images....
Initial Install files not found
Please download it from nook.linuxhacker.ru
and put on first partition of this SD card
the name should start with updatei-cm and end with .zip
Click to expand...
Click to collapse
I'm using a recently nightly build of CM7.
I really love how I have it set-up, but if I don't have anyway to ever back it up my results are effortless.
How can I fix this situation without removal of the system. anyone, please?
First of all, have you done a nandroid backup in CWM? If so you can definitely recover.
Second it looks like your boot file is corrupted, always sending you to recover rather than a normal boot. What boot setup are you using?
echoedge said:
I've worked ever so hard trying to configure and get the aesthetics of my cm7 rom up and running and apps in my testing might have triangulated and caused this error, I don't know.
Whenever I try to install a rom, boot into recovery, do a backup-- basically my clockwork is broken. Not broken, it still tries. It just pops this up on the screen:
I'm using a recently nightly build of CM7.
I really love how I have it set-up, but if I don't have anyway to ever back it up my results are effortless.
How can I fix this situation without removal of the system. anyone, please?
Click to expand...
Click to collapse
You have installed your ROM to SD. There is no CWM recovery on SD installs. You cannot do a nandroid backup with the SD recovery.
See my post here for an explanation of the difference between emmc installs and SD installs:
http://forum.xda-developers.com/showthread.php?p=25354258
However, there is a way to back it up. Keep reading further down in my post.
thank you.
but how do i get access to uAltRam and uAltImg.
Multi SD Mount APP isn't working.
R/W permission difficulties in root explorer..
Using the 4202012 nightly build..
please help,
this shouldn't be too hard, don't let it drive me crazy
echoedge said:
thank you.
but how do i get access to uAltRam and uAltImg.
Multi SD Mount APP isn't working.
R/W permission difficulties in root explorer..
Using the 4202012 nightly build..
please help,
this shouldn't be too hard, don't let it drive me crazy
Click to expand...
Click to collapse
Take the card out and put in your PC. It will see the boot partition and you can copy the files there.
leapinlar said:
Take the card out and put in your PC. It will see the boot partition and you can copy the files there.
Click to expand...
Click to collapse
Hmm.. somehow I got it doing that. I of course tried that before and only the two partitions were loading. This time I was messing with it and clicking the multi sd mount widget and somehow the boot drive came up and I transferred the files on there.
So now I can do a nandroid backup as usual? Or sense it's an (Alt) instead of a recovery thing must it be different?
I'll try some things in the mean time..
Okay, so I have to boot into recovery and choose alternative and do it manually.
Can't do it with Rom Manager/Rom Tool Kit. Tried and it did the same error as in the OP.
Off to try now.
This is really strange though.
I've been messing with Nooks for a while and always used rom manager and the recovery console just fine.. but i've always ever done dual sd boots.This is my first time really doing a single one.
I'm in the boot menu (encore u-boot menu by j4mm3r), 1.2 port + extras.
It's been at
'Booting. One Moment'..." for at least a minute. Assuming it's frozen itself..
edit: Yeah, the Alt files didn't work.. I reset and pressed the N button, went to alternate and SD card. Nothing.
Reset it and it works as usual, but still no ability to backup..
echoedge said:
Okay, so I have to boot into recovery and choose alternative and do it manually.
Can't do it with Rom Manager/Rom Tool Kit. Tried and it did the same error as in the OP.
Off to try now.
This is really strange though.
I've been messing with Nooks for a while and always used rom manager and the recovery console just fine.. but i've always ever done dual sd boots.This is my first time really doing a single one.
I'm in the boot menu (encore u-boot menu by j4mm3r), 1.2 port + extras.
It's been at
'Booting. One Moment'..." for at least a minute. Assuming it's frozen itself..
Click to expand...
Click to collapse
Do not use ROM Manager with the verygreen SD installation. It does not work. Use the boot menu to boot into the alternate. Hold the n key while booting. Choose sd, alt.
Edit: you said two partitions showed up. Did you physically take the card out and insert into a card reader in your PC? It should see just one drive. Make sure those two files are there or it will hang when you choose it in the boot menu. I suspect you put the files on emmc boot since you used that strange program to do it.
Sent from my Nook Color running ICS and Tapatalk
No,
it's something with the multi mount sd app widget.
I hook mini usb to usb.
then hit the widget.
and JUST the boot partition comes up.
It says something about disk F: is not formatted correctly as well.
Just plugging it in without the multi mount app the outward sd card partition and the nook color come up, just those two.
And can't believe I didn't think to take the mini SD out and use an adapter. I'll try it again with that.
You're right I did mess something up with my EMMC.
Before I had it on a stock nook.
Now it goes to the cyanomod thing.
I took the miniSD card out, plugged it in for power and it turned on.
Went to that, had a bunch of force closed issues nothing worked, dry and empty, etc.
Any suggestions?
I'm gonna check out the miniSD card partitions now and try to get something going with that.
echoedge said:
You're right I did mess something up with my EMMC.
Before I had it on a stock nook.
Now it goes to the cyanomod thing.
I took the miniSD card out, plugged it in for power and it turned on.
Went to that, had a bunch of force closed issues nothing worked, dry and empty, etc.
Any suggestions?
I'm gonna check out the miniSD card partitions now and try to get something going with that.
Click to expand...
Click to collapse
There are many threads here that will tell you how to restore stock to emmc. Search for them.
But to get the SD working, do what I said. And I would suggest getting rid of that mount program so you don't mess it up again.
Edit: The problem with those mount programs is, if you mount the wrong partition, windows can only read fat partitions and will ask you to format. System and data are ext4 which windows cannot read.
Sent from my Nook Color running ICS and Tapatalk
Thanks a bunch.
In ubuntu once the sd card is inserted all 4 partititions automatically came up so I was able to copy and paste the Alt images.
Am backing up right now
And yeah getting the emmc back to stop np.
One thing i'm confused about.. you're saying one cannot update rom's if booting from an SD card?
also, i assume all in eed to do to make a back-up on my hard drive or usb (so its not just inclusive to the minisd), i can just root browser into mnt/sdcard/clockworkmod/backup and and create a zip of the 2012.5.5.etc.etc.etc. made folder and trnasfer it onto external device? If needed all I would need to do is a transfer back?
echoedge said:
One thing i'm confused about.. you're saying one cannot update rom's if booting from an SD card?
Click to expand...
Click to collapse
Yes you can update the ROM. Just not with CWM. You place the update-...zip in the boot partition of the SD and then using the boot menu (hold n during boot) select SD and recovery. The script in the boot partition will install the ROM for you. You need to read the first post in the agnostic image thread. It tells you all this.
On the second question, you can do it that way, but the files are already compressed there so just copy the folder to your PC to archive them.
is it okay to just boot into alternative (power + vol up/down) instead of going through the manual booting with the 'N' on start-up?
echoedge said:
is it okay to just boot into alternative (power + vol up/down) instead of going through the manual booting with the 'N' on start-up?
Click to expand...
Click to collapse
Yes. I didn't know you could do it that way. See, you taught me something. LOL. As long as you are getting into the 3.0.2.8 CWM recovery it's OK.
Sent from my NookColor using Tapatalk
Caveat emptor: adopt/follow this guide at your own risk.
Below is a procedure that can be used to install amaces' LN14.1 (ref: https://forum.xda-developers.com/nook-hd/development/marshmallow-nook-hd-hd-t3239269) internally on a Nook HD+ :
Download sdcard-reco-ovation.img.xz from amaces' repo https://notredame.app.box.com/s/26a4bygh9vbaw7jjq08xr5evomvaw5ww/1/3332706778, unzip it (using e.g. 7-zip) and use win32diskimager to write the unzipped content sdcard-reco-ovation.img to a SD card.
Download and copy to the same SD card:
amaces' flashable TWRP zip file, e.g., twrp-3.0.1-0-ovation.zip ( https://notredame.app.box.com/s/26a4bygh9vbaw7jjq08xr5evomvaw5ww/1/3332706778)
amaces' flashable LN14.1 ROM zip file, e.g., lnos_ovation-ota-NMF26Q.170104.zip from https://notredame.app.box.com/s/26a4bygh9vbaw7jjq08xr5evomvaw5ww/1/3332706778
the flashable zip file of Gapps' corresponding pico package open_gapps-arm-7.1-pico-2017[mmdd].zip from http://opengapps.org/
Turn off the Nook, insert the SD card, and boot the Nook from its power-off state.
[Optional] Make a backup of your stock ROM & Apps: to backup onto the Bootable Recovery SD card you'd need to make the boot partition on the SD card large enough to hold the backup of your stock ROM and its Apps -- see my post #7 below.
Select "wipe data & factory reset".
Select "install zip from SD card" and install TWRP recovery zip file.
Select "install zip from SD card" and install LN14.1 zip file.
Select "install zip from SD card" and install Gapps zip file.
Remove SD card and select reboot.
Once the HD+ completes boot-up (be patient as the post-installation initial boot would take 3-5 min), set up the wifi connectivity and your google account info.
If you run into problems during initial setup:
- absence of WiFi network setup step: see this post
- setup process crashes (as have been reported with some combos of ROM and GApps build versions): retry the clean install process with the sequence of steps # 5, #7 & #9 (i.e., skipping over step #8 flashing GApps) and complete the initial setup, then reboot into TWRP to flash GApps; see also https://forum.xda-developers.com/showpost.php?p=72104906&postcount=37 for solution for other setup crash causes.
To enable "Root", see https://forum.xda-developers.com/showpost.php?p=72185622&postcount=1915.
Notes
- This procedure can also be used to install amaces' AOSP7.1 ROM (instead of his LN14.1 ROM).
- If your HD+ is currently running CM11/12/13, see https://forum.xda-developers.com/nook-hd/general/how-to-updating-nook-hd-internal-emmc-t3562818 for an alternate procedure which does not require use of a SD card.
Please post any comment/question on the features or performance of AOSP & LN ROM builds on the Developer's thread at https://forum.xda-developers.com/nook-hd/development/marshmallow-nook-hd-hd-t3239269.
I used these steps and can confirm that it works. I came from stock ROM. I understand that there's a risk since I did not do a original ROM backup.
So far, I am impressed by the work that have gone in to make it happened from so many volunteers.
wiismhour said:
...
I understand that there's a risk since I did not do a original ROM backup.
...
Click to expand...
Click to collapse
If you ever need/want to re-install stock ROM, see #6 of https://forum.xda-developers.com/showthread.php?t=2062613.
digixmax said:
If you ever need/want to re-install stock ROM, see #6 of https://forum.xda-developers.com/showthread.php?t=2062613.
Click to expand...
Click to collapse
Good point! Thx
I did this on my Nook HD yesterday. Everything seemed to go correct, however my tablet will not power off. If I power off it immediately restarts. I saw a similar problem mentioned with another build but can't seem to find the thread that was referenced.
edit: I found this thread https://forum.xda-developers.com/nook-hd/development/marshmallow-nook-hd-hd-t3239269/page166 which implies this is a known problem.
Holding the power button beyond the shutdown screen worked! The tablet powered off and stays off. Phew.
Can I take a moment to say thank you. I have owned a Nook HD and Nook HD+ for almost four years. I am not very technical but did do some modding of them to enable unknown sources, the very basic you could do. The tablets were really sluggish with the original OS but we muddled through. Last week the Nook HD froze at the boot screen and the only way to resolve was a factory reset. I figured the time was right to do something more permanent and followed your instructions.
The only issue I had was I was not able to do a backup. I used an 8 GB SD card. When I used win32diskimager to write the unzipped content sdcard-reco-ovation.img to the SD card for some reason the size of the card changed to ~900 MB. So the SD card didn't have enough space for the OS backup. I redid the card several times but it kept happening. Not sure if you know what I did wrong, but I hope its moot since I hope to never to have to go back to the Nook OS.
Very sorry for the long message, but I am excited with the prospect of having a tablet we can actually use. I plan to do this to my HD+ but that one is still working and has a ton of content that I know will be lost. But I think I have to do it.
bru20 said:
...
Can I take a moment to say thank you.
...
Click to expand...
Click to collapse
You're quite welcome (you can thank me by just hitting the "Thanks" button on my post).
...
The only issue I had was I was not able to do a backup. I used an 8 GB SD card. When I used win32diskimager to write the unzipped content sdcard-reco-ovation.img to the SD card for some reason the size of the card changed to ~900 MB. So the SD card didn't have enough space for the OS backup. I redid the card several times but it kept happening. Not sure if you know what I did wrong, but I hope its moot since I hope to never to have to go back to the Nook OS.
...
Click to expand...
Click to collapse
Bootable Recovery SD card images (such as Amaces' image in this case) are usually intentionally made just large enough for users to add necessary flashable zip files for ROM/GApps/Recovery yet small enough to fit in the smaller size cards a user might happen to have laying around. It's possible but more tedious (and thus potentially error-prone) to create a Bootable Recovery SD card with custom size of up to 16GB for the boot-partition -- I'll post a short guide for this.
Process for Creating a Bootable Recovery SD card for Nook HD+
[Caveat emptor: adopt/follow this guide at your own risk].
Below is the process for creating a Bootable Recovery SD card for flashing ROM/GApps/Recovery on a Nook HD+:
Using a disk partition tool (such as MiniTool Partition Wizard Home Edition) create on a SD card a Primary FAT32 partition of size no larger than 16GB, and set the partition ID type for the partition to 0x0C FAT32 LBA and set its Active flag. Once this is done, the partition should appear as a (read/write accessible) drive under Windows.
Use an archive file manager such as 7-zip and extract the .img file from amaces' sdcard-reco-ovation.img.xz ( https://notredame.app.box.com/s/26a4bygh9vbaw7jjq08xr5evomvaw5ww/1/3332706778 )
Use the archive file manager to extract the files from the .img file and copy them to the SD card: first MLO, then the rest of the files u-boot.bin, uImage, kernel, ramdisk, ramdisk.cwm, ramdisk.stock, and the folder OLD.
Copy to the SD card the flashable zip files for the ROM/GApps/Recovery/etc. that you'd want to install.
Notes
The most common symptoms of failed SD boot and their likely causes are:
The HD+ boots straight to stock -- most likely the boot partition's type and/or flag are not correctly set, or the NT cannot find the MLO in the boot partition (make sure that MLO is the very first file to be copied to the freshly made /boot partition).
If the HD+ consistently boots straight to stock in spite of a valid /boot partition and boot files, it's possible that the tablet is one of those HD+ units that have difficulty booting of SD cards, see http://forum.xda-developers.com/showthread.php?t=2288688 for more info and potential remedies.
The HD+ screen stays dark for seemingly a long time then eventually boots to stock -- most likely the MLO or u-boot.bin are corrupted. I have had this happen to me a few times in the process of extracting them from archive zip files.
The boot partition size is too large -- for some reason the HD+ cannot boot on boot partition of size larger than 16GB.
Fantastic write up.
Everything went flawlessly.
I notice that my device is no longer rooted. Is there a relatively quick way to re-root now that I've completed all the steps in your original post?
Thanks for such a well written guide!!
bozzchem said:
...
I notice that my device is no longer rooted. Is there a relatively quick way to re-root now that I've completed all the steps in your original post?
...
Click to expand...
Click to collapse
Root is built into this ROM and can be enabled in Settings->"Developer Options", but because of a current bug you'd need to enable it, then disable it, then re-enable it again.
digixmax said:
Root is built into this ROM and can be enabled in Settings->"Developer Options", but because of a current bug you'd need to enable it, then disable it, then re-enable it again.
Click to expand...
Click to collapse
Let's just say that you effin rock!!
:highfive:
Problem solved.
Sorry, double post........
After getting root access as described above in post #9, I installed SuperSU and SuperSU Pro from Play.
Once the binary updated and I rebooted, I was stuck in a bootloop. I had to reflash the entire process to get the HD+ operational again.
Is this normal? Did I miss something? Does SuperSU not work with this ROM?
I see that the ROM has "Privacy Guard" which looks to be a form of superuser. Ti backup isn't happy with the stock SU and would prefer I install SuperSU. I would love to install SuperSU but don't want to reflash from scratch again.
Any tips/help would be greatly appreciated!
bozzchem said:
After getting root access as described above in post #9, I installed SuperSU and SuperSU Pro from Play.
Once the binary updated and I rebooted, I was stuck in a bootloop. I had to reflash the entire process to get the HD+ operational again.
Is this normal? Did I miss something? Does SuperSU not work with this ROM?
...
Any tips/help would be greatly appreciated!
Click to expand...
Click to collapse
I believe the "Manage root access" menu in Settings->"Developer options" is meant to eliminate the need for root-access-management apps.
digixmax said:
Root is built into this ROM and can be enabled in Settings->"Developer Options", but because of a current bug you'd need to enable it, then disable it, then re-enable it again.
Click to expand...
Click to collapse
I don't see that option after flashing aosp_ovation-ota-NOF26W.170226.zip
Do I need to reflash, and let CWM fix for root?
michealm1979 said:
I don't see that option after flashing aosp_ovation-ota-NOF26W.170226.zip
Do I need to reflash, and let CWM fix for root?
Click to expand...
Click to collapse
Did you not see "Manage root access" under Settings->"Developer options", or not see "Developer options" itself?
digixmax said:
Did you not see "Manage root access" under Settings->"Developer options", or not see "Developer options" itself?
Click to expand...
Click to collapse
I don't see Manage Root Access.
michealm1979 said:
I don't see Manage Root Access.
Click to expand...
Click to collapse
Apparently "Manage root access" is only available on LN ROM.
For AOSP ROM it looks like you still need to install SuperSU, see https://forum.xda-developers.com/showpost.php?p=71063379&postcount=1647.
Thank you for the work on this. Mine is HD Plus.. Only problem I'm having after upgrade is the unit ignores "Power off" and seems to turn itself on after about 30 seconds of black screen and boots back up. Battery is at 100%, and I disconnected the USB cable, nothing is connected. Anyone else seen this?
RoundSparrow said:
Thank you for the work on this. Mine is HD Plus.. Only problem I'm having after upgrade is the unit ignores "Power off" and seems to turn itself on after about 30 seconds of black screen and boots back up. Battery is at 100%, and I disconnected the USB cable, nothing is connected. Anyone else seen this?
Click to expand...
Click to collapse
I am running lnos_ovation-ota-NOF26W.170226 and have not seen this problem with this build as well as the previous build.
Did you do a "wipe /data & factory reset" before flashing the ROM/GApps zip files?
Also, this thread which has a much larger set of reader might be a better place to post and get help with questions like yours.
digixmax said:
I am running lnos_ovation-ota-NOF26W.170226 and have not seen this problem with this build as well as the previous build.
Did you do a "wipe /data & factory reset" before flashing the ROM/GApps zip files?
Also, this thread which has a much larger set of reader might be a better place to post and get help with questions like yours.
Click to expand...
Click to collapse
I did it on two systems, one is 16GB the other 32GB. The one that keeps turning back on was one was upgraded from CM11 (32GB), the other was virgin Nook OS . Yes, I did wipe /data and factory reset, formatted cache, etc.