Related
The NC return "An Unexpected Error Occurred" message after starting the B&N sync in the Libraries of either Magazines or in Books. I did the Market tip which reset Market for me. Btw, I upgraded from ManualNooter 4.5.6 to 4.5.18.
NookColor 1.2, ManualNooter 4.5.18
Any suggestions,
getting the same error
Huh, I think it was from B&N. It also occurred in the B&N app, running under CM7.
Though, I have not confirmed that my magazine subscriptions have updated since the 4.5.18 update.
The error did not occur in the B&N app, running under CM7 today.
see thread http://forum.xda-developers.com/showthread.php?t=1092036 to see if that helps.
Shucks, the error still occurs in MN but doesnt appear in the Nook app in CM7.
Shop displays, but, clicking on a book selection errors out: service unavailablle.
Sent from my NOOKcolor MN 4.5.18 using XDA Premium App
To resolve the issue I reformated my NC and flashed back to 1.01 following this process: [HOW-TO] : Restore Nook Color back to stock EASILY!
Then updated to NC v1.2 via the manual load method.
Then installed MN 4.5.18.
Seems to be working but with an exception or two observed:
1. On install of 1.0.1, the NC app, Springpad appeared as a book on Home and still does. I can archive it (as a book) but it is not in the app archive (1.2). Downloading just makes it appear and act as a book.
Is there a way to remove NC apps that appear and act like books?
2. I thought there was another observation, oh ya, the reformatting and restore to 1.0.1 instructions indicate that I would loose all my personal data. It and other stray folders remain.... curious....
3. Wifi is annoying, but after a while, I noticed it should settle down and mind its own.
MN nice! I like the Nook Home button.
I successfully removed and then installed Springpad:
1. Archive the app.
2. Log onto B&N in your favorite browser and then delete it from the archive.
3. Find app and the install app.
It is somehow tied up with either the "Account and Sync Settings 2.2.1" or "AuthenticationSvc 1.0" system apps...or both together. Maybe someone with better skills than me can work with that.
I recently bought a new Nook N2E. It actually came with firmware 1.0.0 strangely enough. I did slap 1.1.0 on there.
I want to root this baby. My question is should I revert to 1.0.0, upgrade to 1.0.1, root with touchnooter and proceed with everyone else, or just manually root it noogie style? Or I could stay at 1.1.0 and rip out of touchnooter the things that are not working. I'm just looking for opinions.
volwrath said:
I want to root this baby. My question is should I revert to 1.0.0, upgrade to 1.0.1, root with touchnooter and proceed with everyone else, or just manually root it noogie style? Or I could stay at 1.1.0 and rip out of touchnooter the things that are not working. I'm just looking for opinions.
Click to expand...
Click to collapse
There's no simple answer to that.
In regards to Market things are a little messy on 1.1.0 right now, but we're working on it.
Some people claim they got Market working on 1.1.0, but GabrialDestruir is having trouble with finding a reliable solution for that and so do I.
If you absolutely want Market right now, then save you the trouble and go back to 1.0.1 + TouchNooter 1.6.24
If root is all you need atm, then just check out the updated uRamdisk thread.
ros87 said:
...If you absolutely want Market right now, then save you the trouble and go back to 1.0.1 + TouchNooter 1.6.24....
Click to expand...
Click to collapse
ros87:
If he does go back to 1.0.1/TouchNooter 1.6.2.4, won't the B&N update eventually download automatically and force the unit to update?
there is a way how to (successfully?) block OTA updates, just google it out. It is simple sqlite3 db update.
Thanks for the replies. I decided that since Ive never seen the N2E running android, I would go 1.0.1 and Touchnooter and it worked like a charm. Only thing I cant figure out how to do is change Google Sync from Push to Manual
Updated my rooted Nook touch to Ver 1.1.0, after reverting to factory version as received. Used the two modified files in the SD image, and after the third boot it worked. I get Youtube, Gmail, and Market successfully. Now I cannot install any non-market apps. Somewhere I saw a menu and accepted permissions which I thought would allow installation of many non-market APK's. Guess I need some help, but close to success.
Jim
"Install blocked" message appears "for security, your phone is set to block... Android Market", I had earlier checked accept non-market apps.
jmgazer said:
Updated my rooted Nook touch to Ver 1.1.0, after reverting to factory version as received. Used the two modified files in the SD image, and after the third boot it worked. I get Youtube, Gmail, and Market successfully. Now I cannot install any non-market apps. Somewhere I saw a menu and accepted permissions which I thought would allow installation of many non-market APK's. Guess I need some help, but close to success.
Jim
Click to expand...
Click to collapse
NookColorTools, even if non market apps is checked, uncheck and check it gain.
I've had success three times rooting it with full Market and search.
Here's what I did:
1) Backed up with noogie.img on SD and Roadkil's DiskImage.
2) Used nookRestore on SD to restore /system.
3) Erased and Deregistered to wipe /data.
4) Skipped B&N registration (I don't need/want it).
5) Applied 1.1 firmware update.
6) Used TouchNooter 1.6.24 on SD, modified with 1.1 uRamdisk and framework.jar.
7) Triple booted TouchNooter (gave it five minutes each time), removed card, rebooted, skipped Google registration.
8) Youtube --> GMail --> Market. Downloaded a program in Market.
9) Installed SearchMarket and ADB Wireless Widget. Enabled non-market apps with NookColorTools. Uninstalled YouTube (someone said this helps).
10) Used ADB over wireless to push Vending.apk from here. SearchMarket is no longer needed.
My original thread (with links and other details) is on MobileRead in the nook sections. As ros87 noted, GabrialDestruir hasn't got it to work, but I see no reason why it shouldn't if I've done it successfully on different devices. My guess is that some part of the process is being done differently.
TouchNooter's three boots went like this for me:
1st) Infinite loop of nook dots. I reset after about five minutes.
2nd) Complete freeze either on "Rooted Forever" or nook dots screen.
3rd) Success! and boot to Android Welcome. From here I removed the SD and rebooted.
I've been reading a lot of people reporting that they first tried TouchNooter and this failed, they then had to restore and try a different rooting method. Can this maybe mean that TouchNooter doesn't work anymore for some reason? Are there people which have recent successes with it?
I got it!
I tried it and failed, and panicked at first. I then realized I could reboot the device, but nothing happened still. ros82 has a great thread with backups, shown here
Anyway, I took the recovery option one, and put it into my NOOK Simple Touch and rebooted. It said resetting to factory, wait till done. When it finished, I was rooted for some reason!
Apparently that "restore to factory" doesn't get around to restoring the boot partition.
I can confirm TouchNooter works - I used 2.1.31 to root a new nook touch that I bought over the weekend (twice).
The device was running 1.1.0 out of the box and I had updated to 1.1.2 before the first attempt. That worked but "device info" showed 1.1.0 after the root, and I couldn't force update the firmware after. Market was working after the 1-day wait as well. I used the 8 hard resets to restore the device and tried again on the stock firmware. Same results. I ended up using the MinimalTouch method after updating to 1.1.2 to root while retaining the firmware update.
Touchnooter did NOT work for me.
I have a new NST, came with 1.1.1 stock, then I manually upgraded to 1.1.2. Registered to B&N, have downloaded several books and transferred some epub and pdf files.
Then tried to root:
Upon starting up the NST with the Touchnooter SD image I created, I got the touchnooter instruction screen, then 20 seconds later did see a quick flash to black, then immediately the Nook startup screen appeared with the 5 dots along the bottom.
The screen stayed there with only the first dot black and it hung.
Waited awhile....10 or 15 min.
Took out the SD card, powered the Nook off then back on without the Touchnooter SD card in it.
The Nook was NOT rooted. Went right to stock Nook screens with my books loaded.
Tried it 2 more times, same result.
WHY doesn't this work on my Nook?
didnt work for me either
looks like touchnooter worked for me, but then on reboot i dont get adw option, just normal nook boots.. tried also salsicha nooter, same thing, why doenst it work for me!!!!
Touchnooter not working
I am sure there is something I can do to get this working, no? Had firmware 1.0.1, used the Touchnooter 2.1.31 booted and saw the little android icon and I started the process. Skipped the sign in and enabled location service, then flash of the screen and back to nook reader home. Restart, no Android icon, just e-reader home screen. Updated firmware to 1.1, retried touchnooter 2.1.31, still nothing comes up on startup, just acts like an e-reader, SD card inserted or not.
Sounds to me like some of you are either missing the prompt to select the launcher on 1st restart, or it's not working for some reason. Do you see the little Button Savior button on the right of the screen? If everything worked, you should be able to use that to get back to ADW. If that doesn't work, your default launcher may be set to B&N's home screen. I'd recommend a complete wipe and try again. TN has worked very well for me on 1.1.x, but be sure to set ADW as your home default on 1st launch if that's what you want.
If you have updated to 1.2, be sure to read around before trying to root. Things have changed a bit, apparently.
No button savior
bobstro said:
Sounds to me like some of you are either missing the prompt to select the launcher on 1st restart, or it's not working for some reason. Do you see the little Button Savior button on the right of the screen? If everything worked, you should be able to use that to get back to ADW. If that doesn't work, your default launcher may be set to B&N's home screen. I'd recommend a complete wipe and try again. TN has worked very well for me on 1.1.x, but be sure to set ADW as your home default on 1st launch if that's what you want.
If you have updated to 1.2, be sure to read around before trying to root. Things have changed a bit, apparently.
Click to expand...
Click to collapse
Arrgg. Unfortunately no, I do not see the button savior on the right. I had it rooted a few months back and restored it to the plain e-reader before trying to re-root again. I thought I did a complete wipe by updating to 1.2. Should I go back to 1.1 and then try the µSD?
Cannot root my Nook touch
shadylady said:
I can confirm TouchNooter works - I used 2.1.31 to root a new nook touch that I bought over the weekend (twice).
The device was running 1.1.0 out of the box and I had updated to 1.1.2 before the first attempt. That worked but "device info" showed 1.1.0 after the root, and I couldn't force update the firmware after. Market was working after the 1-day wait as well. I used the 8 hard resets to restore the device and tried again on the stock firmware. Same results. I ended up using the MinimalTouch method after updating to 1.1.2 to root while retaining the firmware update.
Click to expand...
Click to collapse
I've tried auto-nooter and touchnooter and nothing I try works. My Nook is running version 1.1.0 and WAS rooted before but refuses to root now. I have the nooter image (linux using dd if= method) on the sd card but rebooting the device with the nooter card in it never ends with a rooted nook. It simply boots up normally and then complains that the sd card needs to be formatted. I've tried restting/deregistering the nook and trying again. No dice. This thing will not root.:crying:
praedoratrebates said:
I've tried auto-nooter and touchnooter and nothing I try works. My Nook is running version 1.1.0 and WAS rooted before but refuses to root now. I have the nooter image (linux using dd if= method) on the sd card but rebooting the device with the nooter card in it never ends with a rooted nook. It simply boots up normally and then complains that the sd card needs to be formatted. I've tried restting/deregistering the nook and trying again. No dice. This thing will not root.:crying:
Click to expand...
Click to collapse
- for NST FW 1.2 upgraded from NST with recovery image 1.1 only 'tinynooter' will work (as for now) . You will gain root + adb but not the Market/Google Play.
I
I.1 - do a full recovery (6 failed boot's in a row [reset the device just after it starts booting])
I.2- upgrade to 1.2 manually
I.3- run tinynooter from CWR.
or
II
II.1 - wipe system partition using CWR
II.2 - install 1.1 FW using CWR (from cwr_1.1_zip)
II.3 - upgrade to 1.2 manually
II.4 - apply 'tinynooter' using CWR
same procedure if you just want to root 1.1.
- I.1 or II.1 + II.2 + 'Touchnooter' or any other 'nooter' that used to work
----------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------
I.1 - http://nookdevs.com/Nook_Simple_Touch_restore_to_stock
I.2 / II.3 http://www.barnesandnoble.com/u/Software-Updates-NOOK-Simple-Touch/379003175/
I.3 / II.4 http://forum.xda-developers.com/showpost.php?p=26015994&postcount=1
II.2 http://code.google.com/p/nst-recovery/downloads/list
Worked like a charm...after
I was having problems getting touchnooter to work. Running linux and using the dd command I found out I was screwing up the dd command slightly. I'd place the sdcard in my card reader and it would show up on my system as /dev/sdb1 (for instance) so I did the dd if=touchnooter.img of=/dev/sdb1 command but this produced a card that failed to boot even though the rooting software was clearly installed. Changing it to dd if=touchnooter.img of=/dev/sdb fixed the issue and a couple of days of problems rooting my nook became instant root upon reboot.
Now the problem I'm having is installing apps (or finding them). I try and install a google android app and it refuses to install saying my system security isn't setup to allow unsigned (or something like that) apps. I cannot find any security settings anywhere in what is provided by touchnooter that changes this. Also, while I can find a kindle reader app without issue in he amazon app store with a browser on my computer, it refuses to appear when I search the amazon app store from the rooted nook! WTF?
There seems to be a number of issues, in fact. The Opera Mobile app doesn't function, I cannot get gmail set to sync automatically, and I cannot get my yahoo email setup to work. Add to that the inability to install any apps beyond the base provided by touchnooter...I'm thinking of trying again only using the auto-nooter instead.
praedoratrebates said:
Now the problem I'm having is installing apps (or finding them). I try and install a google android app and it refuses to install saying my system security isn't setup to allow unsigned (or something like that) apps. I cannot find any security settings anywhere in what is provided by touchnooter that changes this. Also, while I can find a kindle reader app without issue in he amazon app store with a browser on my computer, it refuses to appear when I search the amazon app store from the rooted nook! WTF?
There seems to be a number of issues, in fact. The Opera Mobile app doesn't function, I cannot get gmail set to sync automatically, and I cannot get my yahoo email setup to work. Add to that the inability to install any apps beyond the base provided by touchnooter...I'm thinking of trying again only using the auto-nooter instead.
Click to expand...
Click to collapse
I suggest updating your nook to FW version 1.2
root with tinynoot as osowiecki shows in the previous post
you can then use adb to install apps
tinynoot will install nookcolortools- open this - and deselect and then reselect install non-markets apps.
this will allow you to install non-market apps
tinynoot doesn't include any google apps.
instead of gmail, I use k9mail - with this I am able to set up my gmail and other emails - all in one app.
I have a nook simple touch, with I rooted with Nooter from nookdevs.
I have two issues: First, when I try to download Dropbox from the Amazon app store, I get an error saying it could not parse the package. Is there either a fix for this, a way to get Android Marketplace to work, or another way to side load the Kindle app besides Dropbox?
Also, I can't figure out what button to use to get back to the main app screen-if I get to anywhere without a back button...I have to reboot. Just me being a noob, but I honestly spent almost an hour trying to figure this out.
Anyone help a noob out?
Thanks in advance.
Can you post a link to the guide you followed? My memory is that the nookdevs rooting guide gets you as far as booting from noogie which lets you manually place files into /system and /data, but if you have the appstore installed, it sounds like you've gotten a little past that.
You want to have nook color tools, IIRC, or similar installed, so that you can enable the installation of "unsigned apps," that ought to let your apps from the appstore finish installing. For that change to take, you'll need the su binary installed and a few other things.
Touchnooter lets you have the android market on a nook touch; glownooter does so on a glowworm, and there are guides here to nooter that uses clockwork to root an NST with the touchnooter-style of root.
If you just need / want the amazon market running, you can use tinynoot - for Android market to work, more of the OS needs to be changed than for the Amazon appstore, but IIRC you do still need to enable unsigned apps.
Android market spontaneously started working, but I would still like the ability to sideload apps. I can't post links-I am new here-It appears to be called TouchNooter.
Hello i should have read the forum before apllying the root process but i pick in one site and only find the forum when the problems began.
I use the Touchnooter2-1-31 thanks for doing it but i use my 32G card so after 30 min no restart i took the sd out and try to power off and the screen became freeze in the same point even after pressing the N button and power 30 seg. power off then on without the card.
By the way i don't have a backup of my default only take out the content of SD card and nook, site not tell me to do it so no return to factory default.
Then i use other card 8G, N2T recovery 0.2 and gain control of NST again and apply with this card the Touchnooter2-1-31 again, since not all programs were in and i could install it .
After 12h i have Gmail and opera mobile but i can't use android market or access to stores of app so i am putting some apps that i can install by email or with .apk
And i copy again the content of .docThumbs and Digital Editions on Nook and on SD and also use the ADE to put the books again in to read but no chance on reeding thems with old BARNES & NOBLE menu
Now for read i have the ezPDF reader.but i don't like it.Aldiko give me error not even install so
I would like to now if i can use the old BARNES & NOBLE menu since i hit N key and home flicks the old BARNES & NOBLE menu and dissapear library put my sreen flashing with the image frozen and his negative image and only with power and N key 30seg i can turn it again but in this process the screen freeze on shop don't open and in nook settings- Social i can change notting flicks but nothing happens?
Is possible to get BARNES & NOBLE menu working again?
Thanks
My question on reading your post is - which version of the NST OS are you starting from?
Something is unhappy, but hard to say what. I would probably reset to stock again, take note of which Nook OS version you are running, and see if one of the other manual nooters works with it.
You make a disk much like the touchnoter disk, but instead of the process running completely automatically, you boot into clockwork recovery mode and choose which zip files to flash.
I threw one together called Tinynoot that gives you root + amazon but no google apps.
There looks like a better implementation called NookManager. Like mine tinynoot it is intended to support a wide range of devices, but it also doesn't install the Google market.
Google apps is a moving target, so you have to be sure the version of the rooting tool you use works with the specific OS installed on your Nook. In order to make Google apps work, core files called framework files are patched. Touchnooter, salsichanooter and I'm blanking on Eded's tool's name are all targeted to getting google stuff working, as well as the basics of getting you root access.
I am guessing that the problem you describe relates to a mismatch between the framework in the touchnooter and the rest of your OS.
Hello my NTS software version was 1.2.* i don't remember this last number but i try when i buy it 2 days ago to install from BN and nothing happens so was in last version, now nook OS how can i see it? Now the software version is undentified by the way yesterday i follow this movie but in the begining the page don't tell me Rooted forever tell me the instructions instead in both times, only in second attempt i get the screen like in movie at min 1:45 Nook Touch Rooting Tutorial - Super Easy Method user TheeBookReader on youtube i can add links
Google play today is working yesterday i install a cracked version but when i pick the apps tell me that the installation will be transfered sooner to my equipment but they don't happear
android market no search so i add searchmarket
When you tell me to reset to stock again is using N2T?
Thanks
Edited to add: i finally do a factory reset and now updating to latest version i will kept my nook as is since here we don't have so many hotspots free to surf on internet, thanks for all the help and info that i receive in this forum