Hi All,
After spending a large amount of time trying to find a solution for the SPL 1.24 to hack. Mainly the Telstra Australia WM6.5 Upgrade. Combining the many efforts of XDA Members I finally got a proper working hack going. I thought I'd post it straight away for the rest of the world to see.
First what you need to do is download the WM6.5 Upgrade from the HTC Website. When you open this you need to go to Start - Run - Type %TEMP% Find the location where the extractor has dumped the files and rename RUU_Signed.nbh to MAPLIMG.nbh. Copy this to the root of the SD Card. Reset your phone into Bootloader and let the flash start. It will fail at 10% than reset itself and install it properly.
From here you need to download a cab clearsecurity.cab which is suppose to be for the Samsung Blackjack 2 but it enables the HTC Snap to be hacked.
From there download the desired Custom Rom and run 1.19 auto.bat and watch the screen go black and the custom rom install.
Any Success???
Hi, can anyone let me know if they have had the same success???
Hi Roger,
Thanks for the post as it worked a treat for me, I was able to flash the HTC Snap after following the above steps. One thing I didn't do is backup the Telstra spl 1.24, Do you know where I can get a copy from?
Once again thanks for the post.
Mr.D
THis looks great. I'd love to try this now, but before I do, I'm hoping you might be able to answer a question of mine, to ease my mind:
If you need to reinstall the original Rom and SPL 1.24, is there any way the the Telecom company can see that the phone's firmware has been previously changed?
Thanks.
Flashing back to Telstra 6.5 Rom
Hey guys, I believe you can just download the latest 6.5 Telstra Rom for the snap from the HTC website. I havern't tried it since I have hacked the phone and the only reason why you would obviously do it is for warranty. Actually I also found out that you can get WM 6.1 rom but you need to contact HTC and you can upload it from there FTP. Sorry I can't provide any more assitance maybe when my phone breaks and I need to flash it back I will post up what I have done.
Hi Roger
Thanks for the reply. This is what's stopping me from trying to flash the ROM. Knowing whether I can restore it back to it's original condition without the telecom company knowing it's been flashed. The phone is only new and if it does develop a hardware problem and I had to send it back, I'm sure they won't fix it under the warranty if they can see that it's been flashed.
If as you suggest, it's just a matter of re-flashing it with the original rom, then that's fantastic. But, I'd really like some firm confirmation before going ahead.
The ROM developed by ookba looks AMAZING and I can't wait to try it.
Thanks.
Flashing Advice
Hi Badcam,
I have owned many HTC phones and I have to say the Snap is probably the most durable out of them all. I find with the Snap and the newer models of the HTC phones from australian carriers they really lock them down and you don't get the full functions as what you pay for. Worst of all they infest the phone with all these carrier features that are not needed.
It is really your choice flashing your phone. Every single phone I have had I have flashed and never had problems only when I drop them lol. For warranty purposes you can always flash back to orginal rom and just tell them thats how you got it. They really can't say much. But I did abit of reading and when you do upgrade the rom from HTC website it does install SPL 1.24 back meaning if you want to flash it back you need to go through the hack again.
Hope this has been helpful.
You said it Roger.
There's so much Telecom rubbish on this phone, it's not funny.
Well, I'll give it a go this weekend. If you're happy it's going to work, I am too. Thanks very much for your advice.
Hey do you guys know how much (in USD) a Telstra SNAP is out there if you buy it outright? Can can anyone ship me one to the States?
What about a TelecomNZ one?
http://store.telecom.co.nz/mobile/pay-monthly/htc-s523
NZ$499.00 is around US$361
http://www.xe.com/ucc/convert.cgi?Amount=499.00&From=NZD&To=USD&x=16&y=17
I'd be happy to sort something out for you. PM me if you'd like.
(Sneaks off to check profile to see if it's switched on...)
Badcam said:
What about a TelecomNZ one?
http://store.telecom.co.nz/mobile/pay-monthly/htc-s523
NZ$499.00 is around US$361
http://www.xe.com/ucc/convert.cgi?Amount=499.00&From=NZD&To=USD&x=16&y=17
I'd be happy to sort something out for you. PM me if you'd like.
(Sneaks off to check profile to see if it's switched on...)
Click to expand...
Click to collapse
Thanks but that's kinda rough. I get the MAPL100 (Dash 3G) here for $100. Looking to get a SNAP S523 for around that, even used. Let me know if you run across one. Thanks!
It's atrocious. Believe it or not, that's a good price. It's just come down NZ$200. Of course, I had to buy my two days before the reduced it.
I'll keep an eye out.
roger.higginbotham said:
Hi, can anyone let me know if they have had the same success???
Click to expand...
Click to collapse
Hi, can anyone tell me how to get the device into bootloader mode? i have followed the steps, but getting it into bootloader mode and then letting it hardspl from the sd is not happening :-( THANKS!!!
Can't find clearsecurity.cab. Can anyone tell me where to find it?
Attempt to answer questions lol
Benzin,
Type in google "clearsecurity.cab download" and find the mediafire link
If you have problems please let me know. Maybe XDA-Developers already have it posted.
wcampagne,
So you are getting into bootloader right, its just not picking up the MAPLIMG.nbh file. You have renamed RUU_Signed.nbh to MAPLIMG.nbh. Also a train of through if you have tried applying previous Roms before hand I suggest you go to %TEMP% file and remove anything that is there that has reference to RUU_Signed or the rom at all. You are probably uploading the wrong file as it might be cached. As I said its just a train of thought. If you have any more problems please feel free to post up and I will figure out a fix for you.
Ookba,
Ebay is your best bet. I got my handset for $150 AUD brand new on bid.
Works great for me and I thank you so much!
Hello All,
I'm a German living in China and totally addicted to this android stuff. So yesterday I bought me a Iconia. I just can say i love it after playing around a while. But there is one thing that is completely unacceptable. The Chinese version lacks all the google tools like gmail, maps, latitude and so on. I'm actually not so much interested in all these games and movies, im more the productive guy.
So here comes the question, after reading all the threads about custom boot roms I wonder whether it is possible just to dd the EU/US system.img to my device - according to the informations of this thread http://forum.xda-developers.com/showthread.php?t=1101759
Could it really be so easy or do i have to take care about other things like versions or other stuff?
Every hint will be appreciated!
It won't be easy first
And...you can brick your tab
I think the safest way is to flashfor the next update a European firmware... so if it says "update avaible" search for the same version but the EU version (here on the forum)
Sent from my GT-I9000 using XDA App
Computnik said:
Hello All,
I'm a German living in China and totally addicted to this android stuff. So yesterday I bought me a Iconia. I just can say i love it after playing around a while. But there is one thing that is completely unacceptable. The Chinese version lacks all the google tools like gmail, maps, latitude and so on. I'm actually not so much interested in all these games and movies, im more the productive guy.
So here comes the question, after reading all the threads about custom boot roms I wonder whether it is possible just to dd the EU/US system.img to my device - according to the informations of this thread http://forum.xda-developers.com/showthread.php?t=1101759
Could it really be so easy or do i have to take care about other things like versions or other stuff?
Every hint will be appreciated!
Click to expand...
Click to collapse
Yes it can be done and it really isn't that hard if you follow the instructions in this post:
http://forum.xda-developers.com/showthread.php?t=1101859
I went to a Chinese firmware and then did the US firmware following these instructions. Just one small point, make sure you have a class 4 MicroSD card before you start.
There are no problems with you doing it on your Chinese machine and it will give you the outcome you are after by providing the International apps that are on the American unit (or in my case the Australian).
Try this link.
http://forum.xda-developers.com/showthread.php?t=1097224
Looks like it might be what you need. Applied it over Chinese rom and then upgraded to US stock.
Trinnity66 said:
Yes it can be done and it really isn't that hard if you follow the instructions in this post:
http://forum.xda-developers.com/showthread.php?t=1101859
I went to a Chinese firmware and then did the US firmware following these instructions. Just one small point, make sure you have a class 4 MicroSD card before you start.
There are no problems with you doing it on your Chinese machine and it will give you the outcome you are after by providing the International apps that are on the American unit (or in my case the Australian).
Click to expand...
Click to collapse
Hello Guys,
I bought Iconia in China with
Build Number: Acer_A500_1.135.02_AAP_CUS4
Bad Thing: No Market, no Maps, no Latitude, no Gmail, chinese everywhere even after switching the Pad to English.
I followed the instructions in the link from Trinity - everything went smooth.
Result: Mix of chinese, but I had market and all the goodies
Then i did a factory reset.
Result: A clean fresh american rom. Includes the languages english, german, spanish, italian, french, chinese simpl., chinese traditional.
Thanks to everyone contributed to this solution!
Hi everybody , i am using an Asus P735 device with a German WM6 Rom installed on it. When trying to upgrade it to an English version 6.0 (since i was unable to find 6.1 for this device, which would definitely be preferable), i receive the following message:
"Cross-language upgrade is not Allowed. Please ensure the upgrade tool language is same as the default language of your device."
The thing is i don't want the "default language of my device". How can i get rid of it?
After lots of searches on the net, including on this forum, i've found no answers and in the few similar cases posted the users were left with no answer.
The Asus language unlock tools is of no help whatsoever on this phone.
Can anybody help me with this device?
The most similar thread on the forum i've discovered is this one:
http://forum.xda-developers.com/showthread.php?t=368107
Thank you very much.
AsusP said:
Hi everybody , i am using an Asus P735 device with a German WM6 Rom installed on it. When trying to upgrade it to an English version 6.0 (since i was unable to find 6.1 for this device, which would definitely be preferable), i receive the following message:
"Cross-language upgrade is not Allowed. Please ensure the upgrade tool language is same as the default language of your device."
The thing is i don't want the "default language of my device". How can i get rid of it?
After lots of searches on the net, including on this forum, i've found no answers and in the few similar cases posted the users were left with no answer.
The Asus language unlock tools is of no help whatsoever on this phone.
Can anybody help me with this device?
The most similar thread on the forum i've discovered is this one:
http://forum.xda-developers.com/showthread.php?t=368107
Thank you very much.
Click to expand...
Click to collapse
for desktop PCs ! if you have by example W7 in French and want to put it in English - I mean to get English package by update- this will not work if you have an OEM license -this is not allowed!
so is that with OEMs if you want to keep license !
for your PDA you must find an unofficial English ROM only! also a way to write it to the phone BUT for this to work DO NOT use Active Sync!
I can't give you more details because don't have a PDA like yours but this problem is interesting
also subscribed to this topic
AsusP said:
Hi everybody , i am using an Asus P735 device with a German WM6 Rom installed on it. When trying to upgrade it to an English version 6.0 (since i was unable to find 6.1 for this device, which would definitely be preferable), i receive the following message:
"Cross-language upgrade is not Allowed. Please ensure the upgrade tool language is same as the default language of your device."
The thing is i don't want the "default language of my device". How can i get rid of it?
After lots of searches on the net, including on this forum, i've found no answers and in the few similar cases posted the users were left with no answer.
The Asus language unlock tools is of no help whatsoever on this phone.
Can anybody help me with this device?
The most similar thread on the forum i've discovered is this one:
http://forum.xda-developers.com/showthread.php?t=368107
Thank you very much.
Click to expand...
Click to collapse
try a way to write firmware without Active Sync read this post to see you need some way like that
http://forum.xda-developers.com/archive/index.php/t-378907.html
ftp.asus.com/pub/ASUS/IA/P735 doesn't works more you have to find somewere a firmware in English as I see no longer Asus support they say this is deprecated sorry to hear that
Hi Ruscan and thank you for your interest in this topic, being the first person to react at all to this problem that has been left unsolved for many years, despite many other people posting about it earlier and who were left with neither solution nor answer/evidence of interest from the side of the developers. I do also think this is an interesting issue that could become even more actual in the future.
So far i was unable to find ANY unoffocial ROM for the P735. I do have the official one (Malaysia) in English though, from Asus's website, yet i do not know how to hack it and eventually install it. Furthermore, i was wondering whether an P750 or P535 ROM could work on a P735 with few modifications, cause the 735 is hardware-wise somewhere between the two.
I am ready to take the time to write the firmware myself yet i have no experience at all in that neither i know from where to start. If to write a new firware then it would be good to finally produce a WM6.1 version for this PDA, instead of the existing 6.0. How to do that, any idea?
Thank you for your explanation and for making this non-sense situation a little bit more clear.
PS: Also, i've read somewhere that the device won't turn-on anymore if upgraded to a different language, does that apply to an update via SD-card as well?
PS2: Installing the Android system on this device would be an option?
..i wonder what would ASUS.UnlockLangID.exe do with your problem..
what's this all about:
p525 had similar problem, that could result in NOT real bricking of device after flash(wrong languague version after reset - device seem to be locked on bootloader then). when tool is used before flash, custom lang roms are working properly(interesting then, what this tool does, btw, as it is launched from WM - so, it may be microflasher, or sth like that).
now...i have strong feeling, that warnings you read about flashing different lang rom, may be related to this ridiculous, small, problem.
issue is, that i do not know, if ASUS.UnlockLangID.exe may help with p735, OR if there's version made for p735.
update: i read this again, slowly:
"Cross-language upgrade is not allowed. Please ensure the upgrade tool language is same as the default language of your device."
...they tell you about upgrade TOOL, not rom.
hmmm, so.. what, if you use tool in languague of...ROM?
maybe unlocklangid code is inside flasher, so using proper updater with proper rom is simple solution?
on the other hand - i am making roms for asuses for years, and i never used default flash method - vide usbloader method(and force mode from BL).
i am not going to encourage you to go this way of thinking, but...
AsusP said:
Hi Ruscan and thank you for your interest in this topic, being the first person to react at all to this problem that has been left unsolved for many years, despite many other people posting about it earlier and who were left with neither solution nor answer/evidence of interest from the side of the developers. I do also think this is an interesting issue that could become even more actual in the future.
So far i was unable to find ANY unoffocial ROM for the P735. I do have the official one (Malaysia) in English though, from Asus's website, yet i do not know how to hack it and eventually install it. Furthermore, i was wondering whether an P750 or P535 ROM could work on a P735 with few modifications, cause the 735 is hardware-wise somewhere between the two.
I am ready to take the time to write the firmware myself yet i have no experience at all in that neither i know from where to start. If to write a new firware then it would be good to finally produce a WM6.1 version for this PDA, instead of the existing 6.0. How to do that, any idea?
Thank you for your explanation and for making this non-sense situation a little bit more clear.
PS: Also, i've read somewhere that the device won't turn-on anymore if upgraded to a different language, does that apply to an update via SD-card as well?
PS2: Installing the Android system on this device would be an option?
Click to expand...
Click to collapse
sorry this is just to test my signature will be back but I do not think Android is an option for your phone it is all about technical specs to port Android on that phone and only Asus will have that
by example I know about a project named Andromnia this is how to use Android on Omnia-WM phone
nice try!! but believe me this is about reverse engineering and does not works for now- no gps/gprs/wifi signal and Android crashes
funny, that andromnia showed me, asus user, that android could be real for REAL PDA's.
andromnia works on p750 when proper kernel is used,
EOT/
---
btw, is author of topic here?
pupakota said:
funny, that andromnia showed me, asus user, that android could be real for REAL PDA's.
andromnia works on p750 when proper kernel is used, so i found ridiculous whining of ..omnia user here. where were users of omnia, when andoid on that device WAS real?
Now, go and focking buy android bs, you ignored andromnia maker for months, do not whine now.
well, HTC killed everything.
btw, is author of topic here?
Click to expand...
Click to collapse
better focus on topic
To be deleted
tell me, what exactly are you trying to use to flash, abi file, exe file, what is it?
cit:
You can extract ABI file and flash you device through SD card
Click to expand...
Click to collapse
sooo..it seems, that updater BUG is reason, not roms itself here.
funny is, that rom cooking for this machine is quite real, if tools i can see are working.
--------------
upd: ok, so, if i see it right, all you need is to:
fully charge battery,
extact exe, get abi,
copy abi to empty sd card(NOT SHDC!),
go to bootloader(hard to say how - try dpad right + soft reset) and
wait.
when update's done, do hard reset.
--------------
of course, i cannot say at this moment, if whole process is safe, it works fine with zinc device(that seem to have identical flash procedures and SAME cross-lang error when manufacturer way of flashing is used(exe)).
i will try to get more info from my mate asap. cross your fingers, and wait a bit.
here's tool you may try to get abi file from original asus updater EXE file:
http://forum.xda-developers.com/showthread.php?t=368401
if it's not working, there's another one, maybe more universal,
http://forum.xda-developers.com/showthread.php?t=511158
btw, are you from Pakistan?
Thanks all of you for your input.
1 - There is NO AsusUnlockLangID.exe for Asus P735 - do not know why.
The one from P535 or P525 is useless on this phone.
2 - Great point about "same-upgrade-tool-language-possibility" yet the official ROM comes in an .exe file that i do not know how to unpack/hack in order to insert the correct ROM or vice-versa.
Could you provide me with some insight for that?
3 - Besides that, do you think a tweaked P750 ROM could work on this phone, or a hybrid P535/735? Wouldn't that be the best/easiest solution, which would in the same way finally create a more advanced ROM for this quite neglected device? The older P535 has even 6.5 ROMs whereas P735 is limited to the basic 6.0. (Does that have any advantage by the way?)
4 - I am open to any way of flashing, given it provides the right result so all your advices are welcome.
Yes, the author is very present
@Pupakota
Ok, thank you, i've just read your last answer. I'm gonna try the tool you're talking about and inform you of the result.
PS: No, i'm not from Pakistan though i love the country, are you from there?
PS2: Any way to port the 6.1 version to P735, to kill two flies in one shot ?
3 - Besides that, do you think a tweaked P750 ROM could work on this phone, or a hybrid P535/735? Wouldn't that be the best/easiest solution, which would in the same way finally create a more advanced ROM for this quite neglected device? The older P535 has even 6.5 ROMs whereas P735 is limited to the basic 6.0. (Does that have any advantage by the way?)
Click to expand...
Click to collapse
PS2: Any way to port the 6.1 version to P735, to kill two flies in one shot ?
Click to expand...
Click to collapse
p750 is different pair of shoes, nothing would be useful in this case. do not try any roms made for different devices(trivia, i know).
-----
i dare to say, that any rom is possible for 735... while searching info, people made every possible build, including 6.5's...ALL chinese :E
rom from exe is exctractable, then fully dumpable, packages are clean and good...
btw, that ABI file is just a renamed rom.bin...
while Activesync method of EXE flashing is wrong, only way of avoiding problem is using SD card flash method then by using that pseudo "abi" file.
dpad to right + softreset should start flash procedure. if not, it may be some key on the right side of the device + soft reset(hard to understand translated chinese...).
but before you decide to try...
could you, AsusP, make photo of bootloader mode?
and please, post link of exe file you were trying to flash, i need it(i mean this english one). for some reason dumped rom from "WWE" version seem to be...hebrew... i really would extract real english rom.
now, only problem is, that besides of one case i did not see any clear information, if sd flash with languague change is safe.
one person wrote it is.
Hi, i'll get back to you ASAP regarding other questions, in the meanwhile here is the link of the firmware in question (that i'm trying to use) :
http://support.asus.com/Download.as...e=P735_FUU_Malaysia.zip#P735_FUU_Malaysia.zip
yup, this one seems to be exactly like one i tried to extract, indeed, it's wwe.
damn, it's OLD
it seems, that cooking custom roms is possible for this device without special problems. new 6.1 or 6.5 should work MUCH faster, than your actual one, or that wwe from asus...
try to make photo of bootloader, and tell me, which version of 735 do you have, 64 mb or 128 mb of ram?
ahh and one last question: do you have original updater with german version of rom, that you CAN flash(i mean, that you have now, in your device)? it may be neccesary, if you ever dare to make further experiments.
"try to make photo of bootloader, and tell me, which version of 735 do you have, 64 mb or 128 mb of ram?"
It is 64MB RAM, same as all Asus P7XX devices i guess, if not upgraded (mine is not).
Sorry, but how do you make photos of the bootloader? Do you mean the update tool?
"ahh and one last question: do you have original updater with german version of rom, that you CAN flash(i mean, that you have now, in your device)? it may be neccesary, if you ever dare to make further experiments."
I have it in the device yes but i don't have the program/CD if that's what you mean. It could be downloaded though from Asus i think...
PS: WWE stands for...?
Sorry, but how do you make photos of the bootloader?
Click to expand...
Click to collapse
Bootloader mode flash(with unpacked from exe rom image on sd card) seem to be Only way to update your device.
I am trying to determine risk linked to this method, so i need photo of LOOK of bootloader mode.
You may enter BL mode by pressing dpad RIGHT and making soft reset, if i am right.
then something should appear, and this is what i want you to photograph it for me(with..camera).
of COURSE, do not put abi image on sd card YET, otherwise you start to update, and we do NOT know yet, if you brick your machine or not.
so, at this moment i just ant to see hot it look like, without flashing, if its typical 525/750 bootloader, not some weird thing, i'd assume, that abi file flashing should not brick machine.
sorry or enigmatic words, cannot explain this easier way.
It is 64MB RAM, same as all Asus P7XX devices i guess, if not upgraded (mine is not).
Click to expand...
Click to collapse
..so not all 735's have 64 mb ram, i'd say, ok?
look, i do not know nothing about your knowledge level, many users of 750's with 128 mb ram are using 64 mb version of roms(typical noob would have no idea to try any different), this is why i mentioned it...
btw, besides using GanFan-ZincROMXtractor's easier way of obtaining rom file from exe is just using restorator, reshack, or similar tool to extract rom at res 152.
result is identical as using zincromextractor, though name of file must be set manually - it is Mars_G4.abi (though, it is not..real abi file, but it doesn't matter).
WWE stands for...?
Click to expand...
Click to collapse
english rom...
what exactly are you trying to use to flash, abi file, exe file, what is it?
xuanmei said:
what exactly are you trying to use to flash, abi file, exe file, what is it?
Click to expand...
Click to collapse
hey, do you have account on one of chinese pda sites?
could you download and post here any 735 kitchen for me, sir?
i'd like to have a look onto it, but for some reason i am not able to register.
WWE World Wide English - got it.
Pupakota thanks a lot for your efforts, i've had a busy schedule these days, i'll paste you all the info soon.
My knowledge level is basic yet i have some experience of programing from before and i'm very keen to learn about this, more than just using the system.