I have instaled on my defy green lens, a 2.3.6 full rom, and i have been searching and i cannot find any one with this problem, a few seconds after restart the phone the screen brigth dims to a point, it is only possible to see in a dark place. The brigth settings doesn´t react, only the buttons change there brigth levels. The problem isn't the screen because when the phone start the motorola symbol appear brigth.
Thanks
If you can go to market install root dim app put all setting to 255 (full) then save then reboot.
Sent from my MB525 using xda premium
tpmmg said:
I have instaled on my defy green lens, a 2.3.6 full rom, and i have been searching and i cannot find any one with this problem, a few seconds after restart the phone the screen brigth dims to a point, it is only possible to see in a dark place. The brigth settings doesn´t react, only the buttons change there brigth levels. The problem isn't the screen because when the phone start the motorola symbol appear brigth.
Thanks
Click to expand...
Click to collapse
sorry, but do you have the automatic brightness on?
i just moved to the GGL-ROM 2.3.6 also, and my first impression was exactly the same ... the screen brightness was very low.
i just turned off the automatic brightness setting and set it manually.
Related
have android desire build on my hd2 and it works great...if i put my phone in standby for a few seconds it comes back on just fine but if its in standby for a few minutes only the keys light up and i have to pull the battery..i was reading some posts and thought i saw something about deleting the data.img....was wondering if this was the solution to the problem or something else..
If you have a black screen and the button lights are on, you can stick it under a bright light and turn it on. It should come on after that. If that's the case then turn off automatic brightness and see if that corrects the issue.
auto brightness wasnt on when i went to go change it...i flipped to it just to see if it would do it but it does the same thing..if in standby for too long,the buttons light up and the screen lights up black but thats it.
dbrodrive912 said:
auto brightness wasnt on when i went to go change it...i flipped to it just to see if it would do it but it does the same thing..if in standby for too long,the buttons light up and the screen lights up black but thats it.
Click to expand...
Click to collapse
hmmm..... have you tried deleting your Android folder and installing another build?
Iam having the exact same problem.
Screen stays Black. Lightens up but nothing comes on...sometimes its fine.
but sometimes it just stays black untill i pull out the battery
Hey Guys,
I have figured out how to get rid of the ugly green screen issues with 3rd party kernels for MIUI.
Goto Settings
Display Settings
Turn automatic brightness on
Adjust the slider until the screen is at the lowest (before it turns green)
Go into advanced mode
Turn on Use Custom under Light levels
Light level to dim - set to 10
This should fix all the issues with green screens!
I never had any green screen on miui, with official or neo/vorbeth/glitch kernels.
I was curious and tried what you posted above, and I can't do step 4
3. Turn automatic brightness on
4. Adjust the slider until the screen is at the lowest (before it turns green)
If auto brightness is set to "on", I can't slide..
filou75 said:
I never had any green screen on miui, with official or neo/vorbeth/glitch kernels.
I was curious and tried what you posted above, and I can't do step 4
3. Turn automatic brightness on
4. Adjust the slider until the screen is at the lowest (before it turns green)
If auto brightness is set to "on", I can't slide..
Click to expand...
Click to collapse
That's odd, maybe the new versions fixed this problem. I guess coming over from cm7 if you have custom brightness it will turn to green with miui
Sent from my Xoom using Tapatalk
it worked, thanks! my dim level was set to 5, changing it to 10 worked perfectly.
strange... never had this issue when i was on miui and that was yesterday.
i have the same problem, i went at a local repair store, and the guys overthere told me that the colour module is broken !!! anyone knows something about this???
they say that in my case i need to replace the screen in order to fix this issue... if anybody have other idea...
thanks in advance !
phone samsung galaxy s1 gt-i9000 stock rom not rooted
I have recently flashed 2.3.6 retail sbf on a DEFY with green lens the main problem is that the screen brightness. On the start the phone as good bright atfer a seconds it dim to a point, that is not possible to see in dayligth, even with pacth, ledefy, diferent Rom nothing change.
If i change the brigth level on the setting it never do nothing, always the same brigth.
I have the same issue on updating to 2.3.6. Screen starts up OK but during book after the Motorola logo starts to animate I almost completely lose brightness. The brightness could be adjusted but seems to go no higher than 50%. I'v tried numerous apps but nothing gets the brightness higher.
I've now managed to root and install Quarx 10th July nightly ICS and it works great, however here is where it gets really weird - if i load the power widget and change the screen brightness with it it actually changes the brightness of the soft buttons and nothing happens on the display.
Anyone have ANY ideas?
Hi,
So my missus dropped her tablet (again) and this time she managed to smash the digitzer. So I went to replace it along with a new screen...
6 months later I get around to changing the parts. I reassemble and try to fire it up.
The Google logo flashes up and stay for about 2-3 sec and the disappears. Then nothing happens.
I tried plugging it in for 10 hrs and retried. No luck.
I can boot into the boot loader and the buttons work.
When I "power off" the device, suprise, it shuts down, on power up the logo flashes again and nothing.
Next I try "start" logo flash and nothing
When I tried Recovery the same again, then after about 60 sec it flashed the funny colored Nexus logo (very quick flash) then nothing again
When I select "Reboot Bootloader" it restarts the boot loader.
I'v been crawling the internet for hours now and have only found repeated attempts of loading the bootloader and trying recovery mode.
I did connect the tablet to the pc for a minute and could see a file structure but haven't been able to do that again.
Can someone please help.
Thanks
Matt
I'm beginning to think that the memory with the os has been lost, I might try unlocking the boatloader and refreshing the oem Rom. Any thoughts?
Sent from my LT22i using Tapatalk
So I unlocked the bootloader and flashed the newest stock rom to the tablet and still wont boot.
Same as before, Google flashes up and then black screen.
So, I figured it out. It was working the whole time, only the backlight went off after the Google logo disappeared. Its not the brightness sensor as its reading correctly in GPS status. It seams to be a software issue.
I've set the brightness to a fixed level and it is working OK, when I set it back to auto adjust it turns the backlight off again, when I shine a torch on the sensor I goes bright again.
Sent from my Nexus 7 using Tapatalk
matthewobrn said:
So, I figured it out. It was working the whole time, only the backlight went off after the Google logo disappeared. Its not the brightness sensor as its reading correctly in GPS status. It seams to be a software issue.
I've set the brightness to a fixed level and it is working OK, when I set it back to auto adjust it turns the backlight off again, when I shine a torch on the sensor I goes bright again.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
I am having the same problem as you have described above. After changing the digitizer/ lcd, the tablet boots up and google logo shows up for few seconds and the screen goes blank. It goes into recovery fine. How did you fix it?
Turns out it's the lux sensor. Turn it on wait for the Google logo to disappear and grab a bright torch and hold it over the lux sensor it's right beside the camera the screen should go bright once it gets to the lock screen. If not use the torch to see what's on the display and once you've unlocked the tablet set the brightness to constantly on full instead of automatic brightness and this will override the lux sensor.
Sent from my Nexus 7 using Tapatalk
matthewobrn said:
Turns out it's the lux sensor. Turn it on wait for the Google logo to disappear and grab a bright torch and hold it over the lux sensor it's right beside the camera the screen should go bright once it gets to the lock screen. If not use the torch to see what's on the display and once you've unlocked the tablet set the brightness to constantly on full instead of automatic brightness and this will override the lux sensor.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Thank you so much. I followed your suggestions and now Nexus 7 is back up and running.
But I am afraid of rebooting it because I wasn't able to replicate your instructions once I had to reboot for system update. I had to flash factory image through fastboot and had to redo the initial setup and then the screen turned on welcome screen. So, it is hit and miss. Sometimes screen does turn on after few minutes of booting and sometimes it takes several hours for the screen to turn on.
I have my screen brightness setup to full. Will this override the lux sensor permanently or only until the next reboot? What is your experience with the tablet since you discovered this solution? Again, thank you so much for your help. I almost gave up on it and was ready to trash it.
Setting it to full with auto off should kick in after boot. When mine boots up it doesn't show the swirling dots but once it's done loading it pops up with the lock screen. I read somewhere that YouTube overrides the brightness setting and defaults back to using the lux sensor. I downloaded and paid for lux auto brightness that can override all app brightness settings permanently and it worked a charm for me. Maybe give to lite version a go and see how you get on.
Sent from my Nexus 7 using Tapatalk
matthewobrn said:
Setting it to full with auto off should kick in after boot. When mine boots up it doesn't show the swirling dots but once it's done loading it pops up with the lock screen. I read somewhere that YouTube overrides the brightness setting and defaults back to using the lux sensor. I downloaded and paid for lux auto brightness that can override all app brightness settings permanently and it worked a charm for me. Maybe give to lite version a go and see how you get on.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Thanks, just downloaded Lux Auto Brightness. Will see how it goes.
What's up guys! I've been having a problem with my phone that turns all red colors a little brighter, to a pinkish color. It's REALLY weird because I know it's not the hardware. When I restart, the colors all go normal and red for about 15 seconds after boot. After about 15 seconds, the color resets back to pink. This change from red to pink happens everywhere. On the home screen, inside apps, and in videos.
I have check all the settings like brightness and adapt display and nothing is out of place.
I will probably factory reset my phone if I can't find a solution but then I'll root to use titanium back up.
Anyone have any ideas?
Spike96 said:
What's up guys! I've been having a problem with my phone that turns all red colors a little brighter, to a pinkish color. It's REALLY weird because I know it's not the hardware. When I restart, the colors all go normal and red for about 15 seconds after boot. After about 15 seconds, the color resets back to pink. This change from red to pink happens everywhere. On the home screen, inside apps, and in videos.
I have check all the settings like brightness and adapt display and nothing is out of place.
I will probably factory reset my phone if I can't find a solution but then I'll root to use titanium back up.
Anyone have any ideas?
Click to expand...
Click to collapse
Are you saying your screen mode is set to adapt display? I have my device set to movie and I can see the change in colors when my S4 switches from the normal screen profile to the movie profile shortly after boot. Although, if you have screen mode set to adapt display you shouldn't notice any change in the colors.
dark5577 said:
Are you saying your screen mode is set to adapt display? I have my device set to movie and I can see the change in colors when my S4 switches from the normal screen profile to the movie profile shortly after boot. Although, if you have screen mode set to adapt display you shouldn't notice any change in the colors.
Click to expand...
Click to collapse
Adapt display was checked. But I found the problem, it was actually the Color Adjustment setting in the "Accessibility" section.
Thanks for the reply!
Sent from my SCH-I545 using XDA Free mobile app