Related
How to remove unwanted stock/preinstalled apps
This is not a question. This is howto
I DID search through the forum and found nothing but
Q: how to remove/uninstall preinstalled apps ?
A: no way !!!
WHAT ??? WRONG ANSWER !!!
Here is how:
First of all I’ll describe my rooted, of course, phone configuration, so if you are on the same boat you can do same trick 99% if not you’ll know where to go
- CyanogenMod 4.1.2.1 (this is latest experimental as of sept-05-09) –works very stable for me
- 4GB SD card partitioned: FAT32, ext3 (512mb), linux_swap (32mb)
(great guide how to part your sd here: http://androidcommunity.com/forums/f56/compcache-userinit-22465/index4.html#post232988 (page 4)
- CompCache with Backing Swap (here: http://androidcommunity.com/forums/f56/compcache-userinit-22465/index4.html#post232988 (page 1)
Requirements:
1) G1 rooted phone
2) Explorer with ability to explore /system folders – I use Astro (market)
3) PC/MAC
4) SDK installed on it (http://developer.android.com/sdk/download.html?v=android-sdk-windows-1.5_r3.zip)
Steps:
1) first and very important: full backup of your system.
- DO NANDROID (it’s preinstalled in Cyano, search forum for “nandroid” if you don’t have it)
- DO ext3.tar (if you use ext3)
- Make full SD copy to your PC
As described here: (yes, same tread, thanks to bdb4269) http://androidcommunity.com/forums/f56/compcache-userinit-22465/index4.html (page 4)
Now we are safe..well, almost
2) find full name for the application you want to uninstall, say for Amazon MP3 it will be com.amazon.mp3.apk
I did it like this
- open Astro explorer
- go to the very top (/)
- search “amazon”
- when search done, write down full app name
- long press trackball – chose – open containing folder – remember the path (ie /system/app)
3) Assume SDK and USB drivers are installed ( http://developer.android.com/guide/developing/device.html )
And phone is connected to pc/mac
= below guide is from http://oneclickandroid.blogspot.com/ with my comments =
- Start emulator (don’t think it is necessary, but lets follow – emulator located in SDK folder\tools\emulator.exe in my case C:\SDK_15\tools\
CMD window pops up for a second and disappeared
- open CMD prompt (in Windows: Start > run > print: cmd , hit OK/enter)
- execute "adb shell" in on terminal from SDK_ROOT/tool folder
(if you did not register SDK folder in windows variables you need to cd to this folder first:
print: cd c:\sdk_15\tools hit enter
print: adb shell hit enter, you’ll see new prompt appeared: #
- print: mount -o remount,rw /dev/block/mtdblock3 /system
This will mount your system folder with read/write permission
- go to system/apps folder of your phone
(print: cd /system/apps hit enter)
*** guide says “/system/apps” but in my case it is “/system/app” ??? (remember I asked you to write down full path and name from Astro ? check your path first ***
- print: rm yourunwantedapplication.apk
i.e. rm com.amazon.mp3.apk hit enter
now, check installed apps in your phone (no reload req.) – is amazon disappeared ?
I wish to try this with app for that has a replacement from the market, like
Dialer – aTakePhone or Music – Meridian etc
Hope someone brave will do it before I do
Deleting may be unsafe if other preinstalled apps or process have links to uninstalled app
What happens in this case? wish someone knows the answer.
I dont think this trick will speedup your phone if you've moved your apps to ext2/3/4 already I just dont want to see useless apps in my phone/pc
Please reply here if you have experience of deleting preinstalled apps
sorry, english is my second languague
Good luck !
Hahahaha... all that trouble just to install a few unnecessary apps off of a ROOTED phone?! If you had searched, you'd have seen the numerous posts where we've posted instructions on uninstalling apps through Terminal. Literally 4 lines of code at most! Note that you can do this with any app you don't want. I have xROM, and one of the first things I do whenever I clean install to the latest version is replace ringtones and remove apps, including HTC Mail, Email, Amazon mp3, and Android Music. It takes me about 2 minutes to remove these apps.
Example for removing Amazon MP3:
su
mount -o rw,remount /system
rm -r /system/app/com.amazon-mp3.apk
mount -o rw,remount /data
rm -r /data/data/com.amazon.mp3
exit
exit
uansari1 said:
mount -o rw,remount /data
Click to expand...
Click to collapse
/data is never mounted read-only.
zelipukin said:
...
- Start emulator (don’t think it is necessary, but lets follow – emulator located in SDK folder\tools\emulator.exe in my case C:\SDK_15\tools\
CMD window pops up for a second and disappeared
...
Click to expand...
Click to collapse
That's not how you start the emulator, in the window that disappears is a message telling you to start with the proper parameters, which you'd see if starting from a command line. If the emulator actually was running, then all your adb commands would then fail because it wouldn't know what device you wanted to address, you'd have to use "adb -d" to tell it to use the real device rather than the emulator.
jashsu said:
/data is never mounted read-only.
Click to expand...
Click to collapse
Thanks for the info.. guess I've been doing an extra step, but this means I can do I through terminal even faster.
Easy way to remove unwanted preinstalled apps
Use Root Explorer to browse to /data/app_s and find the applications you don't want. Delete the APK and ODEX files and you are done.
Always remember to make a backup of your phone, before you start deleting.
ewaldtx said:
Use Root Explorer to browse to /data/app_s and find the applications you don't want. Delete the APK and ODEX files and you are done.
Always remember to make a backup of your phone, before you start deleting.
Click to expand...
Click to collapse
The app_s folder is only used for Hero ROMs because there isn't enough space in /system, so it's placed in /system/sd (the mount point of the ext partition) if you have an ext partition for A2SD.
For regular google source builds just go to /system/app.
there is an app called rootexplorer it has a button to remove syatem apps. real easy to use. http://www.cyrket.com/package/com.sp...e.rootexplorer
saprano614 said:
there is an app called rootexplorer it has a button to remove syatem apps. real easy to use. http://www.cyrket.com/package/com.sp...e.rootexplorer
Click to expand...
Click to collapse
and it works great
Sorry to kind of hijack this but cyrket.com always shows as a blank page.
anyone know why or how to fix that?
i think simply deleting the apk files and data folder will keep an entry in some kind of registry in android. if i just delete the apk files and data folder and run fix_permissions, it shows the same number of processes.
SUFBS
is a rooted file browser and it is, by far, the easiest way of uninstalling any stock apps.
Click one button to make the system folder re-writable (same thing with data folder, just a button), navigate to the apps directory and just delete. or you can search for the app and just delete it from the search window. Voila!
Ssantos6981 said:
is a rooted file browser and it is, by far, the easiest way of uninstalling any stock apps.
Click one button to make the system folder re-writable (same thing with data folder, just a button), navigate to the apps directory and just delete. or you can search for the app and just delete it from the search window. Voila!
Click to expand...
Click to collapse
are you talking about rootexplorer or what? elaborate a little..
i just bought and downloaded/installed rootexplorer simply to delete stock apps. upon opening it ask me to allow it. i say yes and it says my phone isn't rooted.
weird.. i just upgraded from cyanogen v4.1.999( or something around that) to the newest 4.2whatever. so how if my phone not rooted?!
blackinches said:
are you talking about rootexplorer or what? elaborate a little..
i just bought and downloaded/installed rootexplorer simply to delete stock apps. upon opening it ask me to allow it. i say yes and it says my phone isn't rooted.
weird.. i just upgraded from cyanogen v4.1.999( or something around that) to the newest 4.2whatever. so how if my phone not rooted?!
Click to expand...
Click to collapse
try it again lol. it should work
make sure your not on the stock adp recovery
Root explorer!!!
Hi,
i'm trying ro remove stock apps for quite a few days, and i'm getting desperate!
I have everything... titatium, terminal, root explorer, etc etc
with terminal I also receive "directory not empty", but with root explorer I can delete the apk's from /system/app ... I confirm after that they are not there, bus as soon as I reboot the phone they come back.
what can I do ?
I have HTC desire with stock android, rooted .. and also a couple of programs I instaled I don't really knwo what they do.. like rom manager, clockword recovery, etc
plz help!
Sleeepy2 said:
Sorry to kind of hijack this but cyrket.com always shows as a blank page.
anyone know why or how to fix that?
Click to expand...
Click to collapse
It is because the full url path is not correct. Hover cursor over link and look at lower left corner to view the url path...it has those .... in it and will not work. We need the full exact url path.
just use titanum backup,rt click on application it will show (remove),be sure u didn't updated any stock app e.g gmail update
Regarding using Root Explorer on stock G Tab updated to 1.2-4349...
Trying to remove some of the apps preloaded and using Root Explorer get a statement - my phone not rooted.
I want to get the apps off. What to do now? Thanks http://media.xda-developers.com/images/smilies/smile.gif
Thanks for this clear procedure !
Hey, I'm trying to push some stuff onto my mytouch using the included bridge tool, adb, and can't quite get it to work. AKA, I have no effing clue what I'm doing. I'm good with everything else, but when you sit me in front of Terminal I'm useless. Anyway, running Mac OS X, 10.5, I've got the SDK installed, exported, all that, but the internet has been no help with telling me what to do next. Please, someone help? D:
not sure on mac
but on pc i mostly put the files i want to push in to the sdk tools folder which gives you less to type
if you want to push stuff you need to know where to push on phone like
adb remount (makes drive read/write)
adb push xxxx.ogg /system/media/audio/ringtones/
if you want to install something
adb install twitter.apk
so my terminal looks like this (ignore errors phone not in usb)
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\SI>cd s\tools
C:\Users\SI\s\tools>adb remount
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
C:\Users\SI\s\tools>adb push xxxx.ogg /system/media/audio/ringtones/
error: device not found
C:\Users\SI\s\tools>
sitimber has given some good tips. On a Mac, you have to put "./" in front of adb to get it to execute.
For example, I have the Android SDK installed in /Developer/Android. In order for me to use adb, I open terminal and do the following:
cd /
cd /Developer/Android/Tools
./adb (insert whatever adb command here)
jsnyng said:
cd /
cd /Developer/Android/Tools
./adb (insert whatever adb command here)
Click to expand...
Click to collapse
worked perfectly! all the info i was getting was either for windows or linux and i was getting wicked confused. i have like nooo training with terminal so i was lost. that worked perfectly, thank you :]
do i still have to type "adb (command)" when i'm in the shell? i know that far, that im in the adb shell when there's a # next to my open commandline.
This will make it a step easier. If you want to be able to "adb command" every time you open the shell without changing directories,
Open terminal.
Run:
defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder
Click to expand...
Click to collapse
How you will be able to see hidden files.
Download the OSX SDK http://developer.android.com/sdk/download.html?v=android-sdk_r3-mac.zip
Unzip it. Move the entire folder into your root directory "/"
rename it to "android".
Launch TextEdit.app
Hit "Format>Make Plain Text"
Now type (in the document)
export PATH=${PATH}:/android/tools
Click to expand...
Click to collapse
Save is as
.bash_profile
in YOUR HOME DIRECTORY.
Make sure you uncheck "If no extension, use .txt"
Say yes when it asks if you want to make this a system file.
now close terminal (all the way) and relaunch. Type "adb" and whatever you'd like and you're set!
jewishjawsh said:
do i still have to type "adb (command)" when i'm in the shell? i know that far, that im in the adb shell when there's a # next to my open commandline.
Click to expand...
Click to collapse
No, you don't.
chordmasta's directions for creating a .bash_profile are correct, but I'll point out that you don't need to move it to root. I personally prefer not to clutter up root with my personal stuff. You also don't need to rename it if you don't want to.
For example, if you have it in "Documents", you would use this path (replacing my username "softbanksucks" with the name of your home directory.)
Code:
export PATH=${PATH}:/Users/softbanksucks/Documents/android-sdk-mac_x86-1.6_r1/tools
softbanksucks said:
No, you don't.
chordmasta's directions for creating a .bash_profile are correct, but I'll point out that you don't need to move it to root. I personally prefer not to clutter up root with my personal stuff. You also don't need to rename it if you don't want to.
For example, if you have it in "Documents", you would use this path (replacing my username "softbanksucks" with the name of your home directory.)
Code:
export PATH=${PATH}:/Users/softbanksucks/Documents/android-sdk-mac_x86-1.6_r1/tools
Click to expand...
Click to collapse
Thanks for pointing that out. I should have mentioned it. I knew this walkthrough would work without having to change values.
chordmasta said:
Thanks for pointing that out. I should have mentioned it. I knew this walkthrough would work without having to change values.
Click to expand...
Click to collapse
No prob - knew that you knew, just figured I'd point it out for those who don't
To start off I want to say, I am NOT claiming to have created this exploit, I am merely letting people know that it works on the arc.
All credit for this goes to Chainfire and The Android Exploid Crew
The origional thread is here: http://forum.xda-developers.com/showthread.php?t=1044765
Download here
Install the APK and run it.
For people getting "could not extract assets" error execute
adb shell rmdir /data/local/tmp
and then
adb shell mkdir /data/local/tmp
Click to expand...
Click to collapse
Quote posted by jassired
works for me
So just push the apk to the phone, install and you're done?
no need to "push", just stick it on your sd card and install
diggedy said:
no need to "push", just stick it on your sd card and install
Click to expand...
Click to collapse
I get the error thing...and I can't find the effing map where I need to remove stuff....
where do I find the god damned map to remove the files I need to remove when it only fails to install?????
I've checked every single map on the memory card, going nuts here...
Cim_XII said:
where do I find the god damned map to remove the files I need to remove when it only fails to install?????
I've checked every single map on the memory card, going nuts here...
Click to expand...
Click to collapse
What do you mean?
double post :s will use this later
I have put the .apk in my download map on the sd card of the phone, installed the apk and run it and I get the: "could not extract assets" error execute
and then when I get that I am supposed to remove some files from a map on the sd card, and I cannot find said map....I hava rebooted the phone, and I still cannot find data/local/tmp or what ever map I need to find.....
Cim_XII said:
I have put the .apk in my download map on the sd card of the phone, installed the apk and run it and I get the: "could not extract assets" error execute
and then when I get that I am supposed to remove some files from a map on the sd card, and I cannot find said map....I hava rebooted the phone, and I still cannot find data/local/tmp or what ever map I need to find.....
Click to expand...
Click to collapse
you need to execute the commands in the origional post via ADB with USB debugging enabled, because the location is in the system and ironicly you dont have the root privelages to delete them
I don't even know what ADB is....that's how much I know...
Cim_XII said:
I don't even know what ADB is....that's how much I know...
Click to expand...
Click to collapse
I have attached it to this post. ADB is the Android Debug Bridge. It is used to excecute commands on android devices. Just extract the zip, then open a command prompt and change to the directory of ADB, then excecute the commands.
if you get the error for esset you need to remove all the files inside to /data/local/tmp/
press: adb shell
press ls /data/local/tmp
and remove one by one the files as my example:
$ ls /data/local/tmp/
ls /data/local/tmp/
Superuser.apk
Gingerbreak
runscript
sysrun
$ rm /data/local/tmp/Superuser.apk
rm /data/local/tmp/Superuser.apk
$ rm /data/local/tmp/Gingerbreak
rm /data/local/tmp/Gingerbreak
$ rm /data/local/tmp/runscript
rm /data/local/tmp/runscript
$ rm /data/local/tmp/sysrun
rm /data/local/tmp/sysrun
and now try again with app and may it works (in my case, works)
dh2311 said:
I have attached it to this post. ADB is the Android Debug Bridge. It is used to excecute commands on android devices. Just extract the zip, then open a command prompt and change to the directory of ADB, then excecute the commands.
Click to expand...
Click to collapse
maybe I should've mentioned I'm on a Mac computer with no access to windows....damn, this is so frustrating....
Ah... Its still possible you just have to get the android sdk for mac.
Get the SDK from here
Then in the tools folder ADB should be there
Then its commands as normal I think... not sure tho, don't have a mac.
Search around on here for tutorials, I'm sure someone has put up a tutorial on setting up adb on mac
dh2311 said:
Ah... Its still possible you just have to get the android sdk for mac.
Get the SDK from here
Then in the tools folder ADB should be there
Then its commands as normal I think... not sure tho, don't have a mac.
Search around on here for tutorials, I'm sure someone has put up a tutorial on setting up adb on mac
Click to expand...
Click to collapse
kewl, and the exact commands is in post #1 right?
so this root's the OS, title is confusing, does it enable fastboot? allow you to flash custom roms?
should be....
dh2311 said:
you need to execute the commands in the origional post via ADB with USB debugging enabled, because the location is in the system and ironicly you dont have the root privelages to delete them
Click to expand...
Click to collapse
did exactly what you said, but get the message
adb: permission denied
No does not enable fastboot
Hello Everyone,
I recently Rooted my Nexus 7, but did not Unlock it because as I understand it......Unlocking will wipe my data.
I have tried many backup solutions and I find TWRP to be by far the best, but there is one catch and it's bugging me.
TWRP doesn't backup everything. For example "Internal Storage" aka "SDCARD" aka what ever else android calls the directory to be more confusing lol
I have been trying different things to backup what TWRP doesn't cover and it has just been a long frustrating failure.
MTP is terrible. It can't really be trusted and Windows Explorer becomes unresponsive. It worked better when I selected a few folders at a time but still horrible to trust. However I am open to any suggestions.....maybe there is an MTP Client that is better at handling this than Windows Explorer? I don't know.
ADB Kinda sorta doesn't seem to work with a locked device. Although Holo backup which uses ADB seemed to save a lot to a backup file, it didn't work to restore from it. Even tried unzipping it to see what was in that file but no luck. So I don't know if this means ADB is also hopeless or not.
Airdroid / Wifi File Transfer app also don't work very well with certain directories or major transfer sizes.
Any suggestions would be greatly appreciated. I would really like to be able to do the unthinkable which is recover from a Hard Factory Reset, but I am fine with just being able to save a backup of everything that TWRP won't.
Thanks so much in advance.
External USB and Titanium Backup. You can order a cable to use an external usb on amazon for about a dollar.
What about uploading to cloud storage? Dropbox, drive, etc. Might not work so good for large files though.
Sent from XDA app
Not sure why you created another thread on this issue, but what doesn't work with adb? Adb pull /sdcard will pull everything from your sdcard including your twrp backup.
Adb doesn't care if you have a locked boot loader.
Sent from my Galaxy Nexus
KingVeto said:
External USB and Titanium Backup. You can order a cable to use an external usb on amazon for about a dollar.
Click to expand...
Click to collapse
Thanks I already have one and I been using it for the things I tried above. Mine is just a small adapter no cord.
gc84245 said:
What about uploading to cloud storage? Dropbox, drive, etc. Might not work so good for large files though.
Click to expand...
Click to collapse
That would be ok but as you said not so good for large files. plus i would prefer an offline backup solution to toss on my NAS as well.
Pirateghost said:
Not sure why you created another thread on this issue, but what doesn't work with adb? Adb pull /sdcard will pull everything from your sdcard including your twrp backup.
Adb doesn't care if you have a locked boot loader.
Click to expand...
Click to collapse
Honestly it beats me why I can't get ADB to work. Only reason why I though it was related to my bootloader being locked was because some programs / toolkits I used brought up an error saying that it couldnt connect adb due to locked bootloader.
I can't get ADB working and it has been driving me mad lol. I feel like maybe I am doing something stupid wrong when trying to use an adb command.
At this point I would love a noob guide with screen shots on how to use adb command, the adb command line tool....the works on adb lol.
Screenshots would be a huge help to prove that I am not doing something dumb and that I actually have some issue with adb.
Thanks Everyone.
Code:
C:\Users\pirateghost>adb
Android Debug Bridge version 1.0.31
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <specific device> - directs command to the device or emulator with the given
serial number or qualifier. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> --iv <hex-encoded iv>] <file>
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
('--algo', '--key', and '--iv' mean the file is encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
Code:
c:\temp\gnex>adb pull /sdcard
Using your example except for the directory names being different this is what I would get:
(I am using the names of your directories for simplicity....I know enough that mine would vary lol)
After running adb and entering the command as you did. This is the outcome:
'adb' is not recognized as an internal or external command, operable program, or batch file.
HandyAndyXDA said:
Using your example except for the directory names being different this is what I would get:
(I am using the names of your directories for simplicity....I know enough that mine would vary lol)
After running adb and entering the command as you did. This is the outcome:
'adb' is not recognized as an internal or external command, operable program, or batch file.
Click to expand...
Click to collapse
because you have not set adb to be an environment variable.
browse to where your adb.exe is located
make a new directory called n7
hold down shift and right click in the box somewhere in windows explorer
click on open command window here
then type this:
Code:
adb pull /data/media n7/
/data/media and /sdcard are the same location
Pirateghost said:
because you have not set adb to be an environment variable.
browse to where your adb.exe is located
make a new directory called n7
hold down shift and right click in the box somewhere in windows explorer
click on open command window here
then type this:
Code:
adb pull /data/media n7/
/data/media and /sdcard are the same location
Click to expand...
Click to collapse
OK, did that which made perfect sense.
This is what it outputs:
pull: building file list...
0 files pulled. 0 files skipped.
(That was trying it with /media n7/)
The following is when i tried it with /sdcard:
remote object '/sdcard' not a file or directory
HandyAndyXDA said:
OK, did that which made perfect sense.
This is what it outputs:
pull: building file list...
0 files pulled. 0 files skipped.
(That was trying it with /media n7/)
The following is when i tried it with /sdcard:
remote object '/sdcard' not a file or directory
Click to expand...
Click to collapse
/data/media
/data is the partition, media is the directory
/media is looking for a media directory on the root or /
I usually just run...
Code:
adb pull /mnt /N7backup
Which copies everything to a folder called 'N7backup' onto the root of my C:/ drive in Windows...
But, boy... does it take a while! Seriously, I could be half way through 'War & Peace' by the time it's done! (OK, bit of an exaggeration, but you get my point).
For this reason, I rarely use ADB much... I tend to use MTP to copy select folders over - drag'n'dropping folders... Titanium, TWRP, MyStuff, etc., et.al. But even that takes it own sweet time.
---------------------
The N7 is a great device... but it's crippled by the lack of removable storage (microSD), that I can slip into my laptop, and can copy everything within 5 minutes.
Rgrds,
Ged.
Pirateghost said:
/data/media
/data is the partition, media is the directory
/media is looking for a media directory on the root or /
Click to expand...
Click to collapse
I appreciate you're patience with me and the help.
Do I need to do some connect command before doing any of that?
HandyAndyXDA said:
I appreciate you're patience with me and the help.
Do I need to do some connect command before doing any of that?
Click to expand...
Click to collapse
no. the command is simply
adb pull /data/media /nameoffolderyouwanttosenditto
GedBlake said:
I usually just run...
Code:
adb pull /mnt /N7backup
Which copies everything to a folder called 'N7backup' onto the root of my C:/ drive in Windows...
But, boy... does it take a while! Seriously, I could be half way through 'War & Peace' by the time it's done! (OK, bit of an exaggeration, but you get my point).
For this reason, I rarely use ADB much... I tend to use MTP to copy select folders over - drag'n'dropping folders... Titanium, TWRP, MyStuff, etc., et.al. But even that takes it own sweet time.
---------------------
The N7 is a great device... but it's crippled by the lack of removable storage (microSD), that I can slip into my laptop, and can copy everything within 5 minutes.
Rgrds,
Ged.
Click to expand...
Click to collapse
I agree with the first part but I would like to understand and get ADB going and give it a try myself.
As for the "crippled by lack of removable storage" ..........if you are rooted you can use an adapter to go from the usb port on the nexus to a regular USB port then you can use usb flash drives or any kind of usb storage / card reader whatever. You will need to be rooted / have that adapter / and install an app like StickMount so the device can see the drive and mount it as a directory. This works great.
Thanks
Pirateghost said:
no. the command is simply
adb pull /data/media /nameoffolderyouwanttosenditto
Click to expand...
Click to collapse
This should work but instead right away it outputs this:
pull: building file list...
0 files pulled. 0 files skipped.
GedBlake said:
I usually just run...
Code:
adb pull /mnt /N7backup
Which copies everything to a folder called 'N7backup' onto the root of my C:/ drive in Windows...
But, boy... does it take a while! Seriously, I could be half way through 'War & Peace' by the time it's done! (OK, bit of an exaggeration, but you get my point).
For this reason, I rarely use ADB much... I tend to use MTP to copy select folders over - drag'n'dropping folders... Titanium, TWRP, MyStuff, etc., et.al. But even that takes it own sweet time.
---------------------
The N7 is a great device... but it's crippled by the lack of removable storage (microSD), that I can slip into my laptop, and can copy everything within 5 minutes.
Rgrds,
Ged.
Click to expand...
Click to collapse
Sorry I was replying quick and misunderstood.......yes an actual sdcard would not be something I'd say no to. What would be good too is if you didnt have to use either MTP or PTP.....if it just showed up as a drive
HandyAndyXDA said:
I agree with the first part but I would like to understand and get ADB going and give it a try myself.
As for the "crippled by lack of removable storage" ..........if you are rooted you can use an adapter to go from the usb port on the nexus to a regular USB port then you can use usb flash drives or any kind of usb storage / card reader whatever. You will need to be rooted / have that adapter / and install an app like StickMount so the device can see the drive and mount it as a directory. This works great.
Thanks
Click to expand...
Click to collapse
Oh, don't get me wrong - I wasn't trying to dissuade you from using and understanding ADB... and you should give it a try. Definitely. Both Fastboot and ADB are powerful and useful tools, and IMHO you should learn everything you can about them.
I was just grumbling about the data transfer speeds from N7 to laptop...
HandyAndyXDA said:
...if it just showed up as a drive
Click to expand...
Click to collapse
Yes,Yes,Yes... and thrice times YES!.
Rgrds,
Ged.
GedBlake said:
Oh, don't get me wrong - I wasn't trying to dissuade you from using and understanding ADB... and you should give it a try. Definitely. Both Fastboot and ADB are powerful and useful tools, and IMHO you should learn everything you can about them.
I was just grumbling about the data transfer speeds from N7 to laptop...
Yes,Yes,Yes... and thrice times YES!.
Rgrds,
Ged.
Click to expand...
Click to collapse
I understand and agree completely. And, yes i would love to learn as much as i can. This android stuff is awesome and fun.
Thanks again and I like your attitude
BUMP:
So any last ideas on what could be wrong with ADB not working?
I don't blame you if you are stumped at this point.
PS:
At this point I am desperate, so feel free to even ask me noob questions such as .....Did I connect the device to the computer. I won't be offended you guys are a real help.
HandyAndyXDA said:
BUMP:
So any last ideas on what could be wrong with ADB not working?
I don't blame you if you are stumped at this point.
PS:
At this point I am desperate, so feel free to even ask me noob questions such as .....Did I connect the device to the computer. I won't be offended you guys are a real help.
Click to expand...
Click to collapse
UPDATE:
I tried
adb reboot-bootloader
and that worked so why dont
pull
work?
How do you change the Boot/Power Off screen for a NSTG (Nook Simple Touch Glowlight) with firmware 1.2.1 ?
It's rooted etc, and I've read existing threads about doing this, but they relate to earlier firmware versions.
e.g.
This one is for firmware up to 1.0.1, so I'm reluctant to try the old replacement .jar file .
and this one, although simpler, does not seem to work as I could not find the appropriate image in the framework-res.apk file
TIA!
antboy9 said:
How do you change the Boot/Power Off screen for a NSTG (Nook Simple Touch Glowlight) with firmware 1.2.1 ?
It's rooted etc, and I've read existing threads about doing this, but they relate to earlier firmware versions.
e.g.
This one is for firmware up to 1.0.1, so I'm reluctant to try the old replacement .jar file .
and this one, although simpler, does not seem to work as I could not find the appropriate image in the framework-res.apk file
TIA!
Click to expand...
Click to collapse
It's actually very easy - no modified .jars or anything are necessary. Here's a quick key:
• The "Your Nook is completely off" images are located in /system/assets/shutdown_images. They are all easily edited .png files which can be copied and replaced at will. :good:
• The "black/white dots" animation images are located in /system/assets/boot_images, and they are also easily edited .png files which can be copied and replaced at will.
• The "Read Forever" screen is a bit harder - it is located in /boot (accessible via mounting or via booting Noogie) and is named booting.pgm. It is a .pgm file, which is only editable by converting it to .png and then converting it back when the editing is complete.
Hope this helps you out, and be sure to post again if you have any more questions!
ИΘΘK¡€ said:
• The "Your Nook is completely off" images are located in /system/assets/shutdown_images. They are all easily edited .png files which can be copied and replaced at will.
Click to expand...
Click to collapse
Thanks a lot, yes it was easy, at least it was easy using adb.
In case others find it useful:
adb connect <ip address>:5555
adb pull /system/assets/shutdown_images/cold_boot_screen.png
___
backup that file from the directory and put the new one in its place, locally
___
adb shell
mount -o remount,rw -t ext2 /dev/block/mmcblk0p5 /system
exit
adb push cold_boot_screen.png /system/assets/shutdown_images
adb reboot
antboy9 said:
Thanks a lot, yes it was easy, at least it was easy using adb.
In case others find it useful:
adb connect <ip address>:5555
adb pull /system/assets/shutdown_images/cold_boot_screen.png
___
backup that file from the directory and put the new one in its place, locally
___
adb shell
mount -o remount,rw -t ext2 /dev/block/mmcblk0p5 /system
exit
adb push cold_boot_screen.png /system/assets/shutdown_images
adb reboot
Click to expand...
Click to collapse
Another way to do it (the way I normally do it) is to use SwiFTP, which is an FTP server which is hosted on your Nook that is accessible from the PC. You don't even have to push/pull anything; you can just copy the image file you want to edit to your hard drive from the server, edit it, and then just paste it right back into the server. It works perfectly.
Post again to let me know if you'd like the .apk for the FTP server app!
ИΘΘK¡€ said:
Another way to do it (the way I normally do it) is to use SwiFTP, which is an FTP server which is hosted on your Nook that is accessible from the PC. You don't even have to push/pull anything; you can just copy the image file you want to edit to your hard drive from the server, edit it, and then just paste it right back into the server. It works perfectly.
Post again to let me know if you'd like the .apk for the FTP server app!
Click to expand...
Click to collapse
Hi, thanks. Yes I would like the .apk for the FTP server app.
Does it get around the read-only issue?
antboy9 said:
Hi, thanks. Yes I would like the .apk for the FTP server app.
Does it get around the read-only issue?
Click to expand...
Click to collapse
Here it is.
And yes, it does get around the read-only issue. However, you do have to change the directory in [FTP server app]/Advanced Settings.../Stay in folder (which is originally /sdcard) to /, or else you will get a "Permission denied" on the PC.
Enjoy! :good:
There are any number of graphic programs that can convert to/from the PGM graphic file format used in the boot partition.
There is also my Windows command line utility nookbits.exe available in the signature.