Related
Hi Everyone,
I have been running the unrooted leaked 2.2 since it came out, and have had zero problems until today.
My phone ran out of batteries, and after I plugged it in and turned it on, It got stuck in a boot loop.
I have tried the following to get out of the bootloop:
- take out the battery
- take out the battery and the sd card
- boot into recovery mode and restart from there
I know the official 2.3 ota is coming out soon, so I want to fix my phone and also be able to upgrade to that once it is out.
Any ideas?
Thanks,
Eric
UPDATE:::
I finally just booted into recovery mode and wiped data/factory reset and it fixed it.
Then I just easily re-downloaded all the apps from the market on my browser and I'm back to normal.
Thanks!
prob gonna have to sbf or try a factory reset first... hadn't heard or read that one yet
Sent from my DROIDX using XDA App
Go back to recovery and wipe data
SBF, it's not hard, may even have to do it twice - I had some random issues like that too, SBF, now all factory stock, waiting for official update.
GolfnWrx said:
SBF, it's not hard, may even have to do it twice - I had some random issues like that too, SBF, now all factory stock, waiting for official update.
Click to expand...
Click to collapse
IT WILL STILL BOOTLOOP IF YOU JUST SBF. You still need to go into recovery and wipe data
Link to the Motorola help page on how to manual wipe (sorry I can't hyperlink because I'm a forum newbie)
"https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/48517/~/droid-x---factory-data-reset#manual[/url]"
Happy phoning!
Jmoney47 said:
IT WILL STILL BOOTLOOP IF YOU JUST SBF. You still need to go into recovery and wipe data
Click to expand...
Click to collapse
Yeah, you are correct, I always wipe first, didn't think about making it an explicit step.
I've re-installed Atrix 4 times on my phone, each time doing a factory reset, clearing cache, and Dalvik cache. I've had random reboots/shutdowns on every install of Alien Build #4 and Aura 1.1.3.8. One running Atrix stock kernal, 2 using faux's kernal 0.1.6 (one non-oc, one oc), and one using faux's OC 0.1.7. Now I'm running Aura 1.1.3 Build #8 Deblurred. All with random reboots and shutdowns.
I've noticed I never get a random reboot while I'm charging, only while on battery. I've calibrated my battery several times so it's not lack of juice. Sometimes it just reboots, other times it shuts down and doesn't reboot so I have to turn on the phone, though most of the time the screen won't turn on and the phone won't shut off so I have to take out the battery to turn on the phone. I've tried uninstalling SetCPU, disabling profiles, and setting the max clock to 1000mhz. None of this helped.
On the last Alien install (now I'm running Aura) I was having even more problems but they only happened on that install:
1. I got an error when trying to boot in red: "Unrecoverable Bootloader error (0x00000004)" though I was able to turn the phone off and reboot normally.
2. I got an error about 5 times in a row while trying to boot, I forgot the exact text but something along the lines of "Unable to load radio module (0)". I had to take out the battery and try about 5 times till it would boot properly.
3. After this, I was unable to boot into Recovery through the volume buttons, I'd press down till I got the Android Recovery, then press up and it'd hang there. It works now for some reason.
I installed Alien right when I got my phone so I'm unsure if random reboots happen stock. Also my phone gets really warm when I'm using it, I look in SetCPU and the CPU temp is anywhere from 42 to 57 C. Does anyone else's phone get this hot?
I would just take it back to Best Buy and get a new one cause I have a protection plan with them, but my phone is unlocked which voids the warranty.
Does anyone know what could be causing all of these issues and how to fix them?
Thanks for the help, XDA is great!
Im by no means a expert...but I'm currently running AURA 1.1.3#8 debloat and all is well on my phone....I would recommend performing a Ti backup on ur aps and doing a factory reset to see if the problem persists....if it does I would take it back...if not reinstall through CWM wiping devalk cache then a full data wipe then install AURA and reboot all in CWM ....btw I'm running Rom Racers CWM also. Hope you can get it figured out!
JRW 28 said:
Im by no means a expert...but I'm currently running AURA 1.1.3#8 debloat and all is well on my phone....I would recommend performing a Ti backup on ur aps and doing a factory reset to see if the problem persists....if it does I would take it back...if not reinstall through CWM wiping devalk cache then a full data wipe then install AURA and reboot all in CWM ....btw I'm running Rom Racers CWM also. Hope you can get it figured out!
Click to expand...
Click to collapse
I would have just taken it in but my phone is unlocked, rooted, and using Romracers CWM so I doubt Best But will accept it. I've tried all of this. I'm going to try CM7 Beta2, if the problem still persists I don't know what to do cause Best Buy won't accept it when they see the Unlocked at the top of the bootloader. It works fine when it's charging but so far no matter what I've tried I always got reboots. Does your phone get hot? Can you check what temps you get in SetCPU? Thanks for the suggestions btw.
My phone has never gotten over 33*....Try going back to stock gingerbread and see if the problems persist there and if not then u can proceed forward.....that way you can rule out if the problem is the phone or a certain build and a bug you have picked up
Sorry I meant 39* on phone temp
I went into my settings>widow and turned it off then rebooted, seemed to work, I also would get random reboots after a fresh install. Like at least 20x. But try that. Worked for me.
Sent from my MB860 using XDA App
JRW 28 said:
My phone has never gotten over 33*....Try going back to stock gingerbread and see if the problems persist there and if not then u can proceed forward.....that way you can rule out if the problem is the phone or a certain build and a bug you have picked up
Click to expand...
Click to collapse
33? Wow, my phone never goes below 42C, it's usually around 49-50C. How do you return to stock gingerbread like the phone came with? All I've found was flashing the SBF through RDA, is there any way to do it with CWM so it's safer? Sorry for the noobiness, I'm new to the Atrix, is there a way to completely restore the phone to stock (stock gingerbread, locked bootloader, no CWM)?
Edit: I just flashed CM7 pre-beta 2, going to see how this works, hopefully it fixes my problems.
performing a data wipe/factory reset in CWM should put you completely back to stock. It wont matter that you have a UL bootloader or rooted.
Ecstacy42 said:
I've re-installed Atrix 4 times on my phone, each time doing a factory reset, clearing cache, and Dalvik cache. I've had random reboots/shutdowns on every install of Alien Build #4 and Aura 1.1.3.8. One running Atrix stock kernal, 2 using faux's kernal 0.1.6 (one non-oc, one oc), and one using faux's OC 0.1.7. Now I'm running Aura 1.1.3 Build #8 Deblurred. All with random reboots and shutdowns.
I've noticed I never get a random reboot while I'm charging, only while on battery. I've calibrated my battery several times so it's not lack of juice. Sometimes it just reboots, other times it shuts down and doesn't reboot so I have to turn on the phone, though most of the time the screen won't turn on and the phone won't shut off so I have to take out the battery to turn on the phone. I've tried uninstalling SetCPU, disabling profiles, and setting the max clock to 1000mhz. None of this helped.
On the last Alien install (now I'm running Aura) I was having even more problems but they only happened on that install:
1. I got an error when trying to boot in red: "Unrecoverable Bootloader error (0x00000004)" though I was able to turn the phone off and reboot normally.
2. I got an error about 5 times in a row while trying to boot, I forgot the exact text but something along the lines of "Unable to load radio module (0)". I had to take out the battery and try about 5 times till it would boot properly.
3. After this, I was unable to boot into Recovery through the volume buttons, I'd press down till I got the Android Recovery, then press up and it'd hang there. It works now for some reason.
I installed Alien right when I got my phone so I'm unsure if random reboots happen stock. Also my phone gets really warm when I'm using it, I look in SetCPU and the CPU temp is anywhere from 42 to 57 C. Does anyone else's phone get this hot?
I would just take it back to Best Buy and get a new one cause I have a protection plan with them, but my phone is unlocked which voids the warranty.
Does anyone know what could be causing all of these issues and how to fix them?
Thanks for the help, XDA is great!
Click to expand...
Click to collapse
Are you doing a factory data/reset wipe cache and wipe dalvik step after you install a new rom? Do the same wipe steps before and after rom flash. If you are doing this then it sounds like a hardware problem or your bl got thrashed unlocking it.
Sent from my MB860 using xda premium
Ecstacy42 said:
33? Wow, my phone never goes below 42C, it's usually around 49-50C. How do you return to stock gingerbread like the phone came with? All I've found was flashing the SBF through RDA, is there any way to do it with CWM so it's safer? Sorry for the noobiness, I'm new to the Atrix, is there a way to completely restore the phone to stock (stock gingerbread, locked bootloader, no CWM)?
Edit: I just flashed CM7 pre-beta 2, going to see how this works, hopefully it fixes my problems.
Click to expand...
Click to collapse
Go the fruitcakes thread in the developement section. Stock cwm flashable builds.
Sent from my MB860 using xda premium
JRW 28 said:
performing a data wipe/factory reset in CWM should put you completely back to stock. It wont matter that you have a UL bootloader or rooted.
Click to expand...
Click to collapse
It will only reset to the current rom defaults. If you have cm7 or alien flashed, It will revert back cm7 or alien. Doesn't effect root or bootloader. If the rom is pre rooted it stays rooted even after a full wipe.
Sent from my MB860 using xda premium
Dirtburgler said:
Are you doing a factory data/reset wipe cache and wipe dalvik step after you install a new rom? Do the same wipe steps before and after rom flash. If you are doing this then it sounds like a hardware problem or your bl got thrashed unlocking it.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
That sounds highly possible as it happens with each install and I am doing a factory reset, cache wipe, and dalvik cache wipe with each install. If ran the unlocking script again would it erase the bootloader and re-install it to fix that?
Edit: I just got another "Unrecoverable Bootloader error (0x00000004)" error, I'm going to re-run the script.
Ecstacy42 said:
That sounds highly possible as it happens with each install and I am doing a factory reset, cache wipe, and dalvik cache wipe with each install. If ran the unlocking script again would it erase the bootloader and re-install it to fix that?
Edit: I just got another "Unrecoverable Bootloader error (0x00000004)" error, I'm going to re-run the script.
Click to expand...
Click to collapse
No don't. The script doesn't update the boitloader I don't think. Did you use the ota to get gingerbread?
If the bl is fubared and your not on the legit ota you can rsd to 1.83 and start over. If you are on the ota update then all you can use is cwm(safely)
Sent from my MB860 using xda premium
when I was on Ninja SF I performed a factory reset and forgot to perform a backup and it took me back to completly stock gingerbread....sorry if I was misleading him
Dirtburgler said:
No don't. The script doesn't update the boitloader I don't think. Did you use the ota to get gingerbread?
If the bl is fubared and your not on the legit ota you can rsd to 1.83 and start over. If you are on the ota update then all you can use is cwm(safely)
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
My phone came shipped with 2.3.4 Gingerbread, I never used the OTA update. I re-ran the script and got another random reboot.
Edit: I'm flashing the official 2.3.4 SBF from here: http://forum.xda-developers.com/showthread.php?t=1125944
I'll let you all know how things went.
From what I understand ...once u are on 2.3.4 if u try to flashback to. 83 it will hard brick you...definitely flash back to stock gingerbread 2.3.4 and hopefully that will solve your problems ....good luck
I installed Aura 1.1.3 Debloat #7 two days ago and my phone rebooted by itself today. I had it in my pocket, then I took it out and it was loading. I thought I might have pushed something when moving, but maybe it is related to the rom.
Okay, I flashed 2.3.4 with pudding boot loader unlocked and Romracer CWM Recovery. I'm going to install Alien and faux's kernal, hope flashing 2.3.4 fixed this and it's not a hardware issue.
Did you experience any problems while you were on 2.3.4 or did you flash straight to alien afterwards ...hope you get your problems figured out! Make a backup of the 2.3.4 flash also so if you do experience any problems you can always flash back
JRW 28 said:
Did you experience any problems while you were on 2.3.4 or did you flash straight to alien afterwards ...hope you get your problems figured out! Make a backup of the 2.3.4 flash also so if you do experience any problems you can always flash back
Click to expand...
Click to collapse
I flashed straight to Alien when I got the phone so I'm not sure it stock Gingerbread had problems. I just flashed 2.3.4 with pudding unlocked bootloader, Romracer's CWM, and finished installing Atrix Build 4 and faux's kernal 0.1.7. I'm going to take the phone off the charger (I only get reboots and shutdowns while on battery), and start installing my apps, restoring contacts, messages, and see if I have any problems. I'm not going to install SetCPU and mess with profiles and undervolting till I know I'm good.
I'll report how it's going tomorrow morning (usually by that time I get at least 5 to 10 random reboots/shutdowns). If this doesn't fix it then I'm going to flash the stock 2.3.4 SBF so they don't know I messed around with the device and take it back to Best Buy to get a replacement.
Now, I dont usually open threads, but I have an issue here. I've searched and read a lot on how to recover the U8800 in case its soft-bricked, but I've tried the reflashing 2.2 method (Fails in about 5 seconds), Linux method (blefish's method, buzzcomp's method could not yield any results. I connected the phone in the bootloader mode (pink screen) to a Linux PC, but it doesnt appear as a new device there.
Then I tried to upgrade to 2.3, it installs fine, automatically enters recovery (formats data, cache etc), reboots a lot of times (bootloop?). So now whenever I on my phone, the Huawei logo just keeps flashing.
I've also tried to replace the files when connected in the pink screen by replacing the boot.img , recovery.img, amss.bin , EMMCBOOT.mbn file, yet it bootloops.
Prior to this, I had downgraded from Aurora to the stock 2.2, which worked fine. Then I replaced the stock recovery with CWM (the correct one, not the U8800 Pro's). I did the usual clearing of cache, data, formatted system, wiped dalvik cache in order for me to upgrade to a new ROM. Everything went downhill from there
UPDATE : I managed to get 2.3 to be installed. But everytime I enable "USB Debugging", upon the next reboot, there will be a lot of apps which closes unexpectedly, like the Huawei Launcher, Google Framework etc etc. I've tried B526 and B528, but everytime I have "USB Debugging" enabled, this happens. It works fine on 2.2 though
UPDATE 2 : After my fresh installation of the official 2.3, I'd changed the launcher to Holo Launcher, but it fails at starting up. If it does, it keep saying that Holo launcher has closed unexpectedly. The only way to fix it is to boot into recovery and wipe data.
Any help?
bump
U make mistake when you using more method to repair that device. Do you repartition before this. U must back to official partitiob fisrt. Flash that official partition once only not like the tutorial. I face that problem before but everything good now
Sent from my u8800 using xda premium
yusopa said:
U make mistake when you using more method to repair that device. Do you repartition before this. U must back to official partitiob fisrt. Flash that official partition once only not like the tutorial. I face that problem before but everything good now
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
Where can i find the stock partition flash file?
I've found the original partition file from geno, flashed it then installed the official 2.3
everything seems fine, but if i change any settings like turning off fast boot, USB debugging, etc, the phone will bootloop.
UPDATE : I had fast boot disabled, booted in, and now I'm flooded by FC notifications....
I've found the original partition file from geno, flashed it then installed the official 2.3
everything seems fine, but if i change any settings like turning off fast boot, USB debugging, etc, the phone will bootloop.
UPDATE : I had fast boot disabled, booted in, and now I'm flooded by FC notifications....
Click to expand...
Click to collapse
hey i have this same mistake, i have the first boot fine after installing the official rom, but when i reboot the phone in normal boot (diisable fastboot) the phone gets bootloop, so i can't root it in order to put a new rom. i've downgrade to 2.2 froyo and get sum errors after installation but seems to work fine with 2.2 (can even root and install cwm).
after this i try again to upgrade to 2.3 official gingerbread, fist boot is fine, but when i reboot i get again stuck in bootloop... pls help
I am having the exact same issue, does anyone know how to fix this?
The problem is solved？
zgulia22 said:
The problem is solved？
Click to expand...
Click to collapse
I dont know for sure. I flashed another B528, same issues. Tons of FC messages.
I flashed an older B517, installed CWM, flashed DZO's excellent Aurora 5.0, and everything seems fine, for now.
I am having troubles for weeks and still cant do anything
. I can only go into android recovery, can wipe data and then after 2-3 restart, huawei x5 boots. Then if i restart, there are a lot of windows appear showing stop activities. Even i cant click restart button.
So, i put first 2.3.5 then ginger bread custom app to dload in ext and int sd. Then after wiping in android recovery , i made power off and with + - and power, i made update. This time updates were successfull. Before it wa s failing.
It could make updates. But after updates, again could not start. After loading huawei logo, it restarts and cant go to desktop.
I cant change recovery because i cant install superuser because it should be restarted but if it is restarted, cant start.
I can only use sd card, after wiping data, until one restart . How can i change without rooting recovery? And i change recovery, does this help ? I dont know what the problem is.
Please help.
Cursed Chico said:
I am having troubles for weeks and still cant do anything
. I can only go into android recovery, can wipe data and then after 2-3 restart, huawei x5 boots. Then if i restart, there are a lot of windows appear showing stop activities. Even i cant click restart button.
So, i put first 2.3.5 then ginger bread custom app to dload in ext and int sd. Then after wiping in android recovery , i made power off and with + - and power, i made update. This time updates were successfull. Before it wa s failing.
It could make updates. But after updates, again could not start. After loading huawei logo, it restarts and cant go to desktop.
I cant change recovery because i cant install superuser because it should be restarted but if it is restarted, cant start.
I can only use sd card, after wiping data, until one restart . How can i change without rooting recovery? And i change recovery, does this help ? I dont know what the problem is.
Please help.
Click to expand...
Click to collapse
I also don't know what your problem is. Can you upload your logcat to pastebin.com and send the link for the log?
rqmok said:
I also don't know what your problem is. Can you upload your logcat to pastebin.com and send the link for the log?
Click to expand...
Click to collapse
Log of android recovery?
Now i wiped and i am in 2.3.5. 2.6.35.7 kernel and battery seems nice discharging. But i am afraid to restart. IF i restart, it will gain go into desktop but al ot of activites start to show ballons, stop activity.
Cursed Chico said:
Log of android recovery?
Click to expand...
Click to collapse
log of android
rqmok said:
log of android
Click to expand...
Click to collapse
Sorry i seached but i could not find how to see logcat, except dialing *#*#.. to siwtch on.
Should i use a linux computer?
In sd card in dload file, there is a log. Written:
notesdld_file_ptr != -1) !
SD download finished!
Hey. By chance, i dont know how exactly. In android recovery, i made a lot of time wipe data, then took of battery and volume -+ and battery to install step 2 dload. It installed but when i opened, it could not opened. SO i did 2-3 times and i tried to go into pink screen but it tried to install update, so i took battery and i opened after that. Now , the original stock rom is installed. froyo 2.2.1. I dont know how this were installed. But i restarted 3 times and no problem.
So, what i will do is those?
1- Install super user
2- Do root.
3- INstall cwm
That?
(And flash is not working and in file manager, i can only see ext and int sd, not phone memory? BUt in es exploerer, i could see /device.)
And please tell me a good rom to install. MAybe aurora 20 again but how to install, first to 2.3.5 then to aurora then v20?
Aurora ICS
Im having quite frequently restarts when turning on wifi.
Lukish
Cursed Chico said:
Hey. By chance, i dont know how exactly. In android recovery, i made a lot of time wipe data, then took of battery and volume -+ and battery to install step 2 dload. It installed but when i opened, it could not opened. SO i did 2-3 times and i tried to go into pink screen but it tried to install update, so i took battery and i opened after that. Now , the original stock rom is installed. froyo 2.2.1. I dont know how this were installed. But i restarted 3 times and no problem.
So, what i will do is those?
1- Install super user
2- Do root.
3- INstall cwm
That?
(And flash is not working and in file manager, i can only see ext and int sd, not phone memory? BUt in es exploerer, i could see /device.)
And please tell me a good rom to install. MAybe aurora 20 again but how to install, first to 2.3.5 then to aurora then v20?
Click to expand...
Click to collapse
OK. First, you need to upgrade to official 2.3.5. Then, use this guide: http://forum.xda-developers.com/showthread.php?t=1420728
Please follow the guide properly. It is very useful.
lukish_bochi said:
Im having quite frequently restarts when turning on wifi.
Lukish
Click to expand...
Click to collapse
Yeah. That's one of the problems with Aurora.
I installed 5.0.2.8 cwm, is it latest?
And first i did superuser and root. BEcause i am afraid of again having restart prbolems if i go to 2.3.5.
I have this file
U8800_Android 2.3 V100R001C00B526G001(Normal)
It has step 1 dload.
and that
U8800 V100R001C00B136SP05CUSTC75D001(Portugal TMN)
this has step 2 dload.
In your guide i couldnot see.ARe those true for me?
****. I installed step 1 update, it tried to restart but again it went into loop . And it aumatically went into android recovery. Where cwm is, i dont know.
Now i will go back to 2.2.1, i will try. I am very boreed of this.
Hi!
Did you try B517 from this thread: http://forum.xda-developers.com/showthread.php?t=2166353
Look under official gingerbread and you can try B517 or B518.
I tried all 2.3.5 gingerbreads but after updating, it keeps restarting and automatically go into recovery and wipe data and then opens 2.2.1 . I dont know what to do.
i tried to install those you sent. All gingerbreads after updating, started to restart and went into recovery. I dont know what to do. Froyo is ok, no restart. Maybe imei or something was damageD?
No. It could be that your phone is u8800-51, but I am not sure. I don't know how to check this; it might be under the battery, or you might know how to find out on the internet.
now after wpiping data, it installs 2.3.5 . No more 2.2.1. I dont understand sometimes it resets to 2.2.1, sometimes to 2.3.5
I looked under batter, u8800.
And also i was using 2.3.5before. After i came back from aurora, this s h it started. I install cwm but still deletes it.
Cursed Chico said:
now after wpiping data, it installs 2.3.5 . No more 2.2.1. I dont understand sometimes it resets to 2.2.1, sometimes to 2.3.5
I looked under batter, u8800.
And also i was using 2.3.5before. After i came back from aurora, this s h it started. I install cwm but still deletes it.
Click to expand...
Click to collapse
So, are you on 2.3.5 right now? Do you have cwm?
rqmok said:
So, are you on 2.3.5 right now? Do you have cwm?
Click to expand...
Click to collapse
I am on it but after 1 restart, same thing happens, all activities ends. Nothing in it. I cant install cwm because it needs restarts.
When i try to apply update from sd card in android recovery
logs are that
finding update package
opening pdate package
veryifng update package
e:failed to veryfy whole file signature
e:signature verificaton failed
installation aborted
Hi, I tested a lot of ROMs when I noticed, that when I connect my device to charger while it's turned off it doesn't stay turned off and auto turns on. I changed ROM, flashed new stock via RSD, nothing helps. What can I do to completly reset the device and solve it?
Klen2 said:
Now charging works
The bad thing is, that while flashing, propably in RSD, (not this firmware, I made some flashes of 98.16.1 and ICS) I lost my MAC address. Don't know how. Is there any option how to write it on RAZR M? On some phones is (msm 7225A).
Click to expand...
Click to collapse
Klen2 said:
I think it was so:
1) I flashed 98.16.1 via RSD from Vanir KK ROM
2) I forgot to wipe data before flashing, phone did not boot for long time after flashing
3) I forced reboot and booted to recovery (stock) and wiped data
4) When I rebooted, the phone booted to bootloader saying flash failure. The new flashing of new ROM failed (don't know why, maybe because low battery or the 'getprop' line on the beginning of XML in ROM zip).
5) I installed cwm from fastboot and flashed KK AOSP (The only ROM I had)
6) Rebooted, booted to recovery, wiped data and flashed 98.16.1 in RSD, then flashed cwm, booted to cwm, rooted and flashed las test arrrhggg kernel for stock JB, rebooted and then I noticed I have no WiFi
X) I think the problem was in points 1-4
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Klen2 said:
Hi, I tested a lot of ROMs when I noticed, that when I connect my device to charger while it's turned off it doesn't stay turned off and auto turns on. I changed ROM, flashed new stock via RSD, nothing helps. What can I do to completly reset the device and solve it?
Click to expand...
Click to collapse
Normal moto charge mode behaviour. I hate it. A real nuisance at times.
But it wasn't so in past. The phone remained turned off, just a animation of charging battery showed for few seconds.
Klen2 said:
But it wasn't so in past. The phone remained turned off, just a animation of charging battery showed for few seconds.
Click to expand...
Click to collapse
Dev did not maintain stock files.
I was a bit puzzled by this for a while. I have an old 1 amp moto charger that will charge it while powered off. My ex's s4 charger also worked, which is 2 amps.
Sent from my XT907 using xda app-developers app
Klen2 said:
Hi, I tested a lot of ROMs when I noticed, that when I connect my device to charger while it's turned off it doesn't stay turned off and auto turns on. I changed ROM, flashed new stock via RSD, nothing helps. What can I do to completly reset the device and solve it?
Click to expand...
Click to collapse
It could be a bad data app. Do a safe boot. Hold the down vol when you see the first splash screen/ big m hold all the way home.
Restore to the safestrap or custom backup you should have made when you first started messing around.
Rsd is your friend if the above does not work. See my button below.
I tried RSD, wiping data too. Nothing helped.
But now I flashed to 98.30.1 and it works!
The bad thing is, that while flashing, propably in RSD, (not this firmware, I made some flashes of 98.16.1 and ICS) I lost my MAC address. Don't know how. Is there any option how to write it on RAZR M? On some phones is (msm 7225A).
Sent from my XT907 using Tapatalk
I think it was so:
1) I flashed 98.16.1 via RSD from Vanir KK ROM
2) I forgot to wipe data before flashing, phone did not boot for long time after flashing
3) I forced reboot and booted to recovery (stock) and wiped data
4) When I rebooted, the phone booted to bootloader saying flash failure. The new flashing of new ROM failed (don't know why, maybe because low battery or the 'getprop' line on the beginning of XML in ROM zip).
5) I installed cwm from fastboot and flashed KK AOSP (The only ROM I had)
6) Rebooted, booted to recovery, wiped data and flashed 98.16.1 in RSD, then flashed cwm, booted to cwm, rooted and flashed las test arrrhggg kernel for stock JB, rebooted and then I noticed I have no WiFi
X) I think the problem was in points 1-4
Sent from my XT907 using Tapatalk
So I know where was the problem. I wiped /persist by mistake (unfortunetly, it is possible to do it by cwm I used. Here I found a solution (this post) Everything works now.
Anyway I flashed again with RSD and my phone doesn't stay turned off again, crazy.