Accidentally updated my Hboot now I cant go into recovery and I have tried to download clockworkmod from the market doesn't show up. I have tried to google for the clockworkmod apk said parsing error. If anyone could help me thanks. I keep getting red triangle
Sounds like you lost your recovery. Download PC36IMG of amonRA recovery, put it on root of SD. Turn phone on by holding volume down and hit power button. As long as you flashed a bootloader that is indeed for Evo, it should find and install recovery. Stay away from CWM.
sent from AOKP heaven
What hboot version did you "upgrade" to? The oldest hboot (.076.2000) is best, but I know anthrax kernel requires newer version. Not worth it to me (not to mention, I stay away from from Sense). Good luck.
sent from AOKP heaven
Related
I have a original nytouch 3g rooted, just flashed to the cm6-rc2, it worked fine EXCEPT there's NO market app and gmail app. so i went online to ask and some1 said to install market and gmail i need to have Gapps installed and he showed me to go to Rom manager to get those. I went there and saw google app but to be able to install it, it said i must have the ClockworkMod installed first, so i did then it prompt to reboot the phone...i hit OK to reboot it and the phone just got STUCK on the Booting loop, never got to the home screen, i assumed i bricked the damn phone. basically, iam screwed..please anyone help me to fix it, PLEASE..thanks alot
Can u get into recovery or anything? That shouldn't brick your phone. U need to go to amonra 1.7.0 recovery. Forget that method of gapps. Just download and flash the link. People have been having a lot of problems with your method
Sent from my Chromatic Magic using XDA App
well, i tried to turn on the phone by holding home+power, it went to this screen:
ClockworkMOd Recovery v2.5.0.1
-reboot system now
-apply sdcard:update.zip
-wipe data/factory reset
-wipe cache partition
-install zip from sdcard
-nandroid
-partitions menu
-advance
________________________________
ClockworkMod Recovery v2.5.0.1
if i try to select reboot system now, it wont work, it'll will boot but got stuck on boot screen forever.
i did try to select "wipe data/factory reset" then "wipe cache partition" then select "intall zip form sdcard" then it takes me to my sdcard that shows this:
Choose a zip to apply
-Android/
-clockworkmod/
-dcim/
-lost.dir/
-update-cm-6.0.0-DS-RC2-signed
I select "update-cm-6.0.0-rc2..", wait for it to flash then reboot and the phone still gets stuck on boot screen, seems like nothing fixed..
I assumed the issue is the ClockworkMod messed everything up, but i just don't know how to get rid of it....
sigh....so frustrated...i had an iphone before and it's so simple, if you mess up just restore via itunes and everything goes back to stock.. anyway, please help anyone...please
Did u try downloading amonra 1.7.0 and flashing it?
Sent from my Chromatic Magic using XDA App
Did u do a nandroid backup before u flashed the Rom? If u did just restore. If u can I have RA-sapphirev-1.7.0g as my recovery. Same phone as u. You're not bricked. Just need to undo what u did.
Sent from my Chromatic Magic using XDA App
no, i didn't do any backups...stupid me..is there any other way to fix when i don't hava a backup?
Can you get your sdcard to show up on your computer? If you can. Try wiping everything in recovery. Re-partition your sdcard leaving the values as they are. Then download cyanogen 5.0.8 http://forum.xda-developers.com/showthread.php?t=688262 putting that on your sdcard and flashing it to see if it boots up. Also this is the recovery you should have stayed with. http://forum.xda-developers.com/showthread.php?t=530492 and need to go back to. Page also has instructions on different ways to flash it. Let us know what happens. Use g version at top of downloads btw
Make sure that while in recovery you flash the 5.0.8.zip and then flasht the Google Add-on .zip before rebooting.
Actually I flashed them separate and all was well. Just trying to get you into the os so u can flash the recovery and get rid of Rom manager. If u can't get your sdcard on your comp to load another Rom to boot u might have to change your recovery through fastboot. Then flash new Rom. http://forum.xda-developers.com/showthread.php?t=532719. More info on fastboot flashing ect.
Sent from my Chromatic Magic using XDA App
thanks alot guys for helping, i got it worked again, though. i load cm5.0.8 on another sdcard and flash it, it finally booted to the home screen..however, when i tried to go to recovery screen again by holding home+power to flash gapps app, i still see the white "clockworkmod.." on top and bottom of the recovery screen though...weird..is there anyway to get rid of it??? cause' i think it's installed on my phone but don't know how to go in my phone to delete it. any ideas?? thanks
U still have that recovery flashed to your phone. Download the one I posted put on sdcard and use terminal method on that thread to flash
Sent from my Chromatic Magic using XDA App
clock work is fine.... do u still see the options u have? install from zip? after downloading gapp or roms correctly... go into download folder, locate gapp or roms n flash.
by downloading correctly means... having good internet connection and not having data shifting from 3g to e to wateva. plus dont do anything else beside the download. if u lose connection or shifting in connection speed... cancel download n redownload...this will keep download file from getting corrupted during download process... for future referrence - u should do this to everydownload
we r here to help hopefully this will fix ur problem
rooted mt3g 32b
cm6-rc3 htcClay 1.3
clockwork 2.5.0.1
radio 2.22.19.261
haha to make it simpler... flash cm6 rc3... gapp is preinstalled
rooted mt3g 32b
cm6-rc3 htcClay 1.3
clockwork 2.5.0.1
radio 2.22.19.261
I checked through 100s of post tonight and could not find the answer to this and am in need of some help. I attempted to install a Cyanogen Nightly tonight through Rom Manager with no prior knowlege of the issues with CW 2.5 vs. CW 3.0. Stupid I know.
So natuaraly, when the download finished and Rom Manager tried to install, my MT4G just hung at the white boot screen. Through previous posts, the directions were simple to reflash the previous CW Recovery through Fastboot and reflash the Rom.
Well thats where the problem is.... When I attempt to flash ANY Rom earlier than 3.0.0.5, it will say OKAY in CMD, however the phone will never boot into the Recovery. I even tried fastboot erase recovery then reinstalled and still nothing.
So i decided to go a different root and reinstalled 3.0.0.5 to see if there was any work around through there. After i install 3.0 through Fastboot, I am able to go into Recovery, however when I select ANY option no matter what, the hat and the gear icon stay in the background and nothing happens.
I am very confused and lost and am hoping someone here will have had the same issue and can help me get my phone back in order.
Thanks in advance guys!
highrolla1866 said:
I checked through 100s of post tonight and could not find the answer to this and am in need of some help. I attempted to install a Cyanogen Nightly tonight through Rom Manager with no prior knowlege of the issues with CW 2.5 vs. CW 3.0. Stupid I know.
So natuaraly, when the download finished and Rom Manager tried to install, my MT4G just hung at the white boot screen. Through previous posts, the directions were simple to reflash the previous CW Recovery through Fastboot and reflash the Rom.
Well thats where the problem is.... When I attempt to flash ANY Rom earlier than 3.0.0.5, it will say OKAY in CMD, however the phone will never boot into the Recovery. I even tried fastboot erase recovery then reinstalled and still nothing.
So i decided to go a different root and reinstalled 3.0.0.5 to see if there was any work around through there. After i install 3.0 through Fastboot, I am able to go into Recovery, however when I select ANY option no matter what, the hat and the gear icon stay in the background and nothing happens.
I am very confused and lost and am hoping someone here will have had the same issue and can help me get my phone back in order.
Thanks in advance guys!
Click to expand...
Click to collapse
I havent had that issue exactly, but I might be able to help wlk you through getting this fixed. Ive had problems more than once myself on recovery, and helped a couple others solve other issues on here. If you want, add me on google talk (same username as on xda), and Ill walk you through it. Might have to wait till the morning, though, as Im probably gonna head to bed soon.
Fastboot 2.5 recovery and reflash froyo rom. If you decide to install CM7 again - read,search and make sure that you understand what you're doing. It has been stated at least few dozen times that Rom Manager is useless with gingerbread until Koush updates it.
Same Issue??
I believe my issue sounds similar.
I tried to go from Iced Glacier up to CM7. When I did I attempted to use the Clockwork Recovery 2.5 and of course it didn't work. Then I tried to upgrade it to 3.0.0.5. Now when I try to reboot into Clockwork recovery the phone just stays on the MyTouch 4G splash screen. The only way to get around it is use the Power/Volume down button and click on FASTBOOT and then select REBOOT.
The phone then boots in Iced Glacier. I have redownloaded ROM Manager and attempted to FLASH CLOCKWORKMOD RECOVERY. But it still won't load into recovery.
Essentially I need some step by step help to get back to clockworkmod recovery. I'm not too worried if I need to wipe everything. Just looking for the ability to restore again.
Alternatively I'm interested in upgrading to CM7 but not sure how I could do that without recovery working. I would also ask if you can give step by step instructions it would be much appreciated as I'm still pretty new to this.
Thanks!
I also have the similar problem. I have installed the Clockworkmod 3.0.0.5 and have rooted my phone before i was trying to install the gingerbread version. I made a recovery backup. i tried to restore the phone with that backup image but it still hung up with that "t-mobile mytouch " white splash screen.
What should i do now ? i have no idea how to bring my phone back to life :/
fosunite said:
I also have the similar problem. I have installed the Clockworkmod 3.0.0.5 and have rooted my phone before i was trying to install the gingerbread version. I made a recovery backup. i tried to restore the phone with that backup image but it still hung up with that "t-mobile mytouch " white splash screen.
What should i do now ? i have no idea how to bring my phone back to life :/
Click to expand...
Click to collapse
Jmg90300zx said:
I believe my issue sounds similar.
I tried to go from Iced Glacier up to CM7. When I did I attempted to use the Clockwork Recovery 2.5 and of course it didn't work. Then I tried to upgrade it to 3.0.0.5. Now when I try to reboot into Clockwork recovery the phone just stays on the MyTouch 4G splash screen. The only way to get around it is use the Power/Volume down button and click on FASTBOOT and then select REBOOT.
The phone then boots in Iced Glacier. I have redownloaded ROM Manager and attempted to FLASH CLOCKWORKMOD RECOVERY. But it still won't load into recovery.
Essentially I need some step by step help to get back to clockworkmod recovery. I'm not too worried if I need to wipe everything. Just looking for the ability to restore again.
Alternatively I'm interested in upgrading to CM7 but not sure how I could do that without recovery working. I would also ask if you can give step by step instructions it would be much appreciated as I'm still pretty new to this.
Thanks!
Click to expand...
Click to collapse
Sounds like both of you should of never of done this. This has been discussed a few times, and the end result is always the same.....
Download the correct Recovery image (which can be found in the Development section) and install it to your phone by using the ADB commands, in the fastboot mode. you can find a quick and painless way to set those up in my signature. Once you have installed the recovery image you can boot into hBoot and select recovery. from there you can flash CM7 and the gapps. Once you have done all that download the official clockwork ROM manager from the market and flash his current recovery image.
flash my mt4g with ice glacier it keep rebooting phone now wont to put back factory rom please help
NUKEDBONE said:
flash my mt4g with ice glacier it keep rebooting phone now wont to put back factory rom please help
Click to expand...
Click to collapse
Slow down and think about what you are wanting to say.
You rooted the phone?
you turned s=off?
you downloaded Rom Manager?
You flashed the Recovery image?
What version did you flash?
I'm assuming you flashed 3.0.0.5 since that is the newest CWRI on the application.
3.0.0.5 is only for 2.3 (Gingerbread ROMS)
Download and flash Cyanogen(mod) CM7, either of the nightlies or the RC1 will work. Make sure to also flash the G/apps. Then go to the market re-download the CWRM then scroll to the bottom and flash a older version of CW's Recovery image. OR follow True_Blues method for installing 3.0.0.6.
http://forum.xda-developers.com/showthread.php?t=944681
your phone isn't bricked, but it in "limp mode" sorta speak. To get to the recovery image pull the battery out of the phone, put it back in and put the battery cover back on, Then press the Volume down button (on the rocker) and hold it. Then pres and hold the power button. It'll boot into HBoot and you can use the volume rocker to select recovery and get back into the recovery mode. Then select "mount" the "USB' to move Cyanogen to the SD card, along with the GAPPS.
Then do a factory reset (wipe the hand held) then flash Cyanogen, then flash the GAPPS, then reboot.
=========================================================================================
not trying to sound like a a hole but a search might help to this was the top
http://forum.xda-developers.com/showthread.php?t=979362
SAME EXACT PROBLEM... and it was already answered.
Ok it has been awhile since I have messed with my wife's Streak or since I had one (I went with the Captivate). She just got a replacement Streak from Dell and it came with the AT&T locked 1.6 on it. I have tried flashing clockwork and streakmod to it and it does not stick. What am I doing wrong? What am I missing? Please help her gripping is about to kill me.
Sent from a phone using an app running Cog4.2.1 with gingercog theme.
Take a look here http://forum.xda-developers.com/showthread.php?t=805112 Don't forget that you need to root before you attempt to flash.
You don't need root before flashing a custom rom. Flash streakmod recovery then use the fastboot command to reboot the phone. Make sure you hold both volume buttons as the phone reboots. If you let the phone boot normally streakmod recovery is overwritten by the stock recovery, but if you don't let it boot you can boot into streakmod and then flash your custom ROM. All of DJ Steve's ROM's are already rooted.
If you want a custom rom this is what I would do:
Since you can get 2.2 OTA, I would go ahead and upgarde to the OTA version of 2.2
Copy the ROM you want and your install.txt (if needed) to your sd card
Flash streakmod recovery
Boot into the streakmod recovery and install the ROM
You will now be rooted and have the ROM you want installed.
If you don't want a custom ROM I suggest:
you upgrade to the 2.2 OTA version (and then apply a different stock version if you want)
then root (SuperOneClick will probably work)
rename the file install-recovery.sh that is in /etc to something else to prevent the recovery from being overwritten
Flash streakmod recovery
make whatever other mods you want
If you want a version of Android beyond or different than the OTA update leave the stock recovery on the phone until you get the stock version of Android you want installed.
AnyMal said:
Take a look here http://forum.xda-developers.com/showthread.php?t=805112 Don't forget that you need to root before you attempt to flash.
Click to expand...
Click to collapse
Thank you I just found that a little while ago, the stickies don't show up on the tapatalk app unless you select it.
Sent from a phone using an app.
Marvin I tried that but it was not working, hence the reason for questioning.
Thank you for your help from both of you.
Sent from a phone using an app.
ok i have gone through every step to the letter and i still cant get O2 1.6 to update.
also i cant get the 2.2 ota update to go through either
what recovery do you have. You cant do a stock update with a custom recovery.
metal1f3 said:
what recovery do you have. You cant do a stock update with a custom recovery.
Click to expand...
Click to collapse
the stock recovery, that is referance in the link above.
i did "attempt" to go straight to steves's build by flashing clockwork, but it did not take (at least it did not appear to) so i started following that guide and it is NOT working.
How can I determine which recovery i am using? it "looks" like the stock one to me but maybe i am wrong
You need clockwork or streakmod recovery to flash one of dj steves roms. When you boot into recovery if you select update with the camera button and you get the dell logo with the exclamation mark in a triangle, press the power button and if a blue menu comes up then you have streakmod. I havent used clockwork as i've heard it doesnt play well with the streak, so im not sure if the steps are the same. You can search the forums for streakmod recovery and flash it if you dont have it.
ive tried using both streakmod and clockwork, but they just give me a blank screen.
does anyone know how to get to the official dell update when the update screen says none available?
are you pressing the power button after selecting option 2?? With streakmod you'll get a blank screen until you press the power button. To manually do a stock update you'll need to flash a stock recovery, then copy update.pkg to your sd card and update by selecting option 2 in recovery.
Picture gallery that shows what to expect from streakmod recovery. As usual click on the thumbs for larger images.
After selecting the #2 option at the first screen you should see a Dell logo and an exclamation point. Press the power button to get the streakmod options. If you get a blank screen wait a few seconds and try the power button
ill give that shot tonight thank you
Just got a new Vibrant, and I'm having difficulty getting to clockwork recovery. This is my 3rd Vibrant, my previous 2 were rooted also. I've never had any trouble getting to clockwork recovery, but this phone has been a real pita.
In the past I would just hold the power button and select recovery from the options. Or I would go to ROm Manager and select it there. Now with this new phone, neither of those options work. Any other way to get to clockwork recovery?
I think you have to hold both volume buttons and power until the Vibrant logo dissapears, then it should enter to recovery mode...
That's how it works for me.
If you get Rom Manager, it has an option to boot into recovery mode.
onasri15 said:
If you get Rom Manager, it has an option to boot into recovery mode.
Click to expand...
Click to collapse
I know, but it doesn't take me to clockwork recovery, just regular recovery.
^ are you trying to flash a rom?
check the noob guide, I put a second update.zip in there that is CWR... you will need to have a rom on your sd to flash if you want to root/flash though. It does not root your phone like the other update.zip (JFD).
onasri15 said:
If you get Rom Manager, it has an option to boot into recovery mode.
Click to expand...
Click to collapse
s15274n said:
^ are you trying to flash a rom?
check the noob guide, I put a second update.zip in there that is CWR... you will need to have a rom on your sd to flash if you want to root/flash though. It does not root your phone like the other update.zip (JFD).
Click to expand...
Click to collapse
Yeah I am trying to flash a ROM. Thanks, I'll check it out.
s15274n said:
^ are you trying to flash a rom?
check the noob guide, I put a second update.zip in there that is CWR... you will need to have a rom on your sd to flash if you want to root/flash though. It does not root your phone like the other update.zip (JFD).
Click to expand...
Click to collapse
Wow, that actually worked, lol.
What changed that I couldn't do it thru the power button or ROM Manager like I have been doing for the past year?
I can't say with certainty. I have tried several times to tell Koush there is a problem, but he seems to think its me.
No Clockwork recovery after ODIN back to stock
Samsung Vibrant (Galaxy s t-mobile)
rooted, ran a version of Trigger for awhile. Tried a MIUI rom yesterday. it barely worked for me. Had to ODIN back to stock. (Thanks XDA gang for helping me figure that one out). Anyway, back to stock. Re-rooted but cannot get clockwork recovery to flash. I try using ROM manager but when I go into recovery it is stock samsung recovery.
FYI, I also tried the second update.zip that is suppose to flash CWR option from NOOB GUIDE.. No luck
Help appreciated, I am a noob but I did make it this far w/o asking for help.
thanks in advance.
To do it from stock you have to reinstall packages 2 times in a row then it will go cwr and you can flash from there.
Seems like. everyone's forgetting this step