[Q] kindle charging only on stanby Screen? - Kindle Fire General

hi guy, i' just buy a new,amazone kindle, but when using (opening - reading - ...) i found that it not charge any more when pluged usb cable. it just charge only, when screen off ?
at first, i thinking that, that because of new rom (CM7), but when i restore original rom (no root, no TWRP intalled), issue still does. so any one getting same issue. hix 7

Turn screen off, wait for 3 sec til the power led changes to orange, turn screen on again & it'll keep charging

AsakuraVN said:
Turn screen off, wait for 3 sec til the power led changes to orange, turn screen on again & it'll keep charging
Click to expand...
Click to collapse
when turn on .. it discharge again...

Oh, it seem to discharge if you use a charger under 1A (including PC charge). I just tested my 0.6A charger & got the same problem
But my iphone & ipad chargers (which are 1A & 2.1A) still keep charging the Fire whatever I do

AsakuraVN said:
Oh, it seem to discharge if you use a charger under 1A (including PC charge). I just tested my 0.6A charger & got the same problem
But my iphone & ipad chargers (which are 1A & 2.1A) still keep charging the Fire whatever I do
Click to expand...
Click to collapse
nice, i'll check that, and let U know ^^

Yeah, the amps are the problem, the default fire charger is 1.8 amps, I've tested various different chargers, and found some very low amped chargers wont charge it at all. As longs as the amps are high enough thou, you wont have that problem.
Sent from my Kindle Fire using xda premium

Related

touch HD battery questions

the first battery charge on the HD is supposed to be a 8 or 10 or 12 hour charge? or on its not necesary
also the time used to charge it to the pc via usb cable is same as if ud plug it in the electric socket?
how long dose it take for u to charge ur phone.....
mine had 4 lines out of 10 and after 3 hours of it beeing conected to my pc and not in use its still got 4 lines....
opinions seem to vary on how long for 1st charge - personally I left mine on (mains) overnight, but that's just because I've had mobiles since year dot, and you used to have to!
But charging via PC doesn't seem to work as well as from the mains charger - depends a lot on the PC and how much juice it kicks out, some are a lot better than others.
Modern phones/batteries do not need "overnight" charging. My Touch HD even came with a little note saying you don't need to charge for 16hrs/overnight. Just charge until it's full...
Better to charge with wall socket because not all USB ports provide enough current. Some can't charge through the USB port while some can.
I can charge through my notebook but it takes a lot longer than the wall socket.
thanks bouth of u for the fast anwsers....
When I set WiFi settings to max performance, my HTC HD will not charge at all, actually it will loose charge during night, display is off, just WiFi, GSM and GPS is active, connected to provided wall charger. Back side of phone is really hot, I measured over 54°C
Problems charging.
guys(and lady's) Just got my HD. been running it for some time to drain the battery, while on my laptop the battery starts charging. I wanted to drain the battery to give it a good charge afterwords so I turnd off the option of charging while unit is active( in batt. menu) but When I got to 5% batt.cap. an tried to charge the unit (batt. option enabled again) it doesn't charge. now my batt. is empty and can't get in the phone. while on power my battery charging led gives a couple of seconds of charge indication then it turns off.
Any suggestions or is my battery dead. (charging unit is oke, and when on power the HD does give sufficient power to the battery (measured with mulitmeter) thx guys edit - Als when on power green and amber lights blink.
Could that be that your battery is too hot ? There is some safety protection that prevent the batyery to charge when it is over a temperature level.
battery not charging properly
My touch hd not charge the battery more then 50% i change the battery but same as before.
any suggestion
Regards
funstuffalex said:
also the time used to charge it to the pc via usb cable is same as if id plug it in the electric socket?
Click to expand...
Click to collapse
Power socket gives about 1amp - USB 500mA (.5 amp)
Touch HD Battery Charging Problem
The rom i am using is Energy 3 Rom
and try to use both sources wall socket and pc usb both are same.
if i charge the battery on usb cradle and put the phone it shoes 100% but after some use of the phone the charging start again and never show's full even left it over night.
Best regards
Not sure what's going on there,but try draining the battery to almost empty each time and then turn your phone off before charging it. Do this a few times and see if it helps. Mine took about a month beforeit came good.
Dear samlives
Thanks for helping
I will try it
Best Regards
HTC Touch Battery Charging Problem
I got a solution its not 100% but for time being its working for me.
Long press the power button and put the device in sleep mode.
All Done now charging 80 to 90% quite better then before.
Thanks a lot

Impossible to charge sg2 in car

Hi all, just came 3 days ago from an htc hd2, and so far I am more than happy with it.
I have only one complaint and maybe you guys will help me sharing your experience : I can't charge this phone in my car while using gps.
It seems that the power adapter is not powerful enough to charge the phone screen on.
The car charger has a 5v 1000ma output, more than the regular wall charger provided by Samsung and it was working well before with my HD2 so I have no clue about this problem.
Did you experience that issue too, else can you share what car charger do you use?
try to buy new standard car charger with micro plug.. 13 eur and you will be saved..
Sent from my GT-I9100 using XDA App
Charger doesn't matter unless the phone is dropping into USB charging mode - phone limits to around 600-650 mA by default.
Custom kernels can bump this limit up for I9100 users. I777 users are screwed - we've got a crippled charger chip.
I had the same problem, I used the samsung one, useless, so I used my iPad charger, which is 2A, and charges the iPad quick, still useless. We drove from Bathurst NSW, down to Melbourne, about 10 hour drive, plugged in all the way using GPS, and about an hour from home, the connect to charger warning came on!! So once I stopped GPS, it started taking charge. Looks like when the phone is in use, it draws more then it takes charge, plus I read somewhere on here the phone is limited on the charge it takes, so using the 2A does nothing different then the stock 500mA charger.
I always had this problem with my Nexus One, although they are different phones, the problem is the same, uses more power then it can recharge in USB mode.
After trying 3 or 4 different charges I remember that I found one ultra-cheap 'made in taiwan' from a street seller that worked very well.... so it's kind of a lucky shot!
good luck!
Im using a genuine Samsung SGS2 charger and I can charge and run Sygic just fine. I started my journey with 80% and 40mins later I was up to 91% when I stopped and got out. (not in aeroplane mode..)
Very interesting feedbacks... So that confirm that is clearly not a matter of output amperage power.
It is now the same problem on the galaxy tab 10.1, for quickly charge this tab you need the Samsung compatible usb adapter.
It can be likely with a tab bringing a proprietary plug, but I didn't thought it will be the same with a Samsung phone bringing a regular micro usb plug. Quite frustrating and disappointing!
I will search around a micro plug car charger as suggested by redzion, but actually I don't clearly see the difference with my usb charger + a micro usb cable.
Double post, sorry.
If I use the usb cable from my cd player I have the same problem but if I use the official Samsung car charger Ithe only problem I have is the phone getting stupid hot
Sent from my GT-I9100 using xda premium
Oh Samsung, when you will understand?!
Samsung DOES follow the USB charging standard - it goes to its highest current setting when a charger that follows the standard is connected.
Note that iPad/iPhone chargers do NOT follow the standard - Samsungs will treat these as USB hosts and limit to 450 mA instead of 600-650.
Modified kernels can increase both of these values on I9100s.
The only thing Samsung really did **** up is counting screen/CPU current usage against the charge current limits - that's just stupid.
So the charger has smarts. On the i9000 factory chargers, the data pins were bridged. Bridging these pins manually on a USB cable when connecting to a USB source (such as a PC) enabled full current charging. You can see this in Settings -> About; it will say either USB or AC charging.
Do you think this is the case with the i9100?
I don't condone testing this theory on your i9100. Increasing the max current via custom ROM may be a safer solution.
I had the same problem. Two things fixed it for me:
1) I bought this charger: Sony Ericsson AN300 Micro USB 10€
2) I am using a custom kernel now
Any charger that is rated at 1000mA or more (per port) will do just fine. The problem is the cable - you need a quality microUSB cable, or it won't provide all the juice you need. I had the same issue, and I swapped three chargers until I found the real culprit.
Try with the charger you have now and the mUSB cable that was in the phone box - it should work well with that one.
I just press the power button to turn the screen off. when i need the sat nav i press the power and it still tracks you so there is no delay. With the screen off it does charge.
same problem
Duffman19 said:
I just press the power button to turn the screen off. when i need the sat nav i press the power and it still tracks you so there is no delay. With the screen off it does charge.
Click to expand...
Click to collapse
You are right, but even if it is better than nothing the charging time is still a big problem.
Yesterday I drove for at least 40mn phone off. Arrived to destination, I turn the device on: it charged only from 0 to 5%
I would like to test the mariusi theory concerning the Samsung micro usb cable, unfortunately on my SgsII box I just have a wall charger, no a microusb-usb cable.
Entropy512 said:
Samsung DOES follow the USB charging standard - it goes to its highest current setting when a charger that follows the standard is connected.
Click to expand...
Click to collapse
Is there a way to know before buying if the charger respect this charging standard?
I have some cheap usb chargers here and no one is a fast as the one provided by Samsung.
Entropy512 said:
The only thing Samsung really did **** up is counting screen/CPU current usage against the charge current limits - that's just stupid.
Click to expand...
Click to collapse
Maybe for safety purpose? Gps phones can become very hot behind the car glass.
Samsung are trying to "encourage" you to buy only their official accessories. To do this they've wired something differently in their chargers and cables. This "problem" exists on the Galaxy Tab too and can be solved with this adapter...
http://www.ebay.co.uk/itm/USB-car-w...ccessories&hash=item2c5c07736b#ht_3084wt_1163
It's cheap and turns a trickle charge into a full charge. I don't know the specifics of what they've done, but their USB charging just isn't the same as most others manufacturers.
Archer said:
It's cheap and turns a trickle charge into a full charge. I don't know the specifics of what they've done, but their USB charging just isn't the same as most others manufacturers.
Click to expand...
Click to collapse
Great find.
Pretty sure it just bridges the data pins.

problems charging

I'm trying to charge the fire with my htc charger but it never moves from 29% I was able to use the same htc lead to connect to my pc with no problem at all has anyone else had problems ?
shug176 said:
I'm trying to charge the fire with my htc charger but it never moves from 29% I was able to use the same htc lead to connect to my pc with no problem at all has anyone else had problems ?
Click to expand...
Click to collapse
The charger and the lead are different. The lead may work but that does not mean that the charger is compatible. Try a different charger and check the voltage on the charger because the Kindle Fire only accepts a certain voltage.
Sent from my Kindle Fire using xda premium
The stock Kindle Fire power supply is 1.8A, which will charge the Fire whilst you are using it.
If you use a USB cable, or a USB cable that connects into a power adapter, you are likely to get a lot less power (probably between 500mA and 1A) which probably won't charge the Fire whilst you are using it. When it's in standby it should charge it OK, but will probably take twice as long because of less output power via USB.
The power supply that comes with the KF is not the same as most cell phone chargers. It outputs (DC): 5V, 1.8A. This is higher than most regular cell chargers.
One I tried was 3-6V, 1.2A and it didn't charge the unit continually. The light would go out and if you watched the Device screen, you would see the Charging message go on and off with the light. So it was charging.. but barely enough.
krelvinaz said:
The power supply that comes with the KF is not the same as most cell phone chargers. It outputs (DC): 5V, 1.8A. This is higher than most regular cell chargers.
One I tried was 3-6V, 1.2A and it didn't charge the unit continually. The light would go out and if you watched the Device screen, you would see the Charging message go on and off with the light. So it was charging.. but barely enough.
Click to expand...
Click to collapse
I would agree, you're going to need 1.8A to use it AND charge it at the same time. However, on standby it does charge OK with less Amps. That might not be the case if you've hacked the Wifi to "Always On". I might play around with it to see I can confirm either way.

Hd2 not getting charged!!!! Pls help me

Hi Folks,
My HTC HD2 Android not getting charged either by a wall charger or usb via my pc... i dont what happened suddenly it got turned off due to low battery and when i pluged it for chrging its not showing orange LED notification of charging. when its off and plugged in Orange LED blinked once and Phone got switched on. And when its connected to PC for abt 3 mins it will show charging and after that it shows discharging and battery drains when it shows it discharging . pls help me out coz i dont want to loose my Leo .
Thanx in advance,,,,
Check the pins at the phone which connects to the battery. Sometimes they are deformed and this cause the charging/not charging problem.
But... in this case I don't think this is the problem, because this problem should not affect direct charging from usb cable.
Anyway check them just for sure!
Thanks VDodi
VDodi said:
Check the pins at the phone which connects to the battery. Sometimes they are deformed and this cause the charging/not charging problem.
But... in this case I don't think this is the problem, because this problem should not affect direct charging from usb cable.
Anyway check them just for sure!
Click to expand...
Click to collapse
I tried diff cables but its the same...
Magldr doesn't support charging when phone is off.
Nigeldg said:
Magldr doesn't support charging when phone is off.
Click to expand...
Click to collapse
so if your phone dies how do you get it to charge?
Wdustin1 said:
so if your phone dies how do you get it to charge?
Click to expand...
Click to collapse
Best way is not to let it run out
However, normally it will have enough charge left once it dies to boot up far enough to start charging. If this is not the case, then you have to cut open a USB cable and use the red and black wires to charge the battery. I have not had to do this and am unsure as to how to do it but there are tutorials. It seems simple enough.
Sarathdna said:
Hi My HTC HD2 Android not getting charged either by a wall charger or usb via my pc... i dont what happened suddenly it got turned off due to low battery and when i pluged it for chrging its not showing orange LED notification of charging.
Click to expand...
Click to collapse
Consider, as was previously suggested, a cable connection issue.
While you do not currently have the luxury of looking at your status icons, I have found that, on occasion, when I plugged in the phone to charge, the status icon indicated a USB connection, rather than a charging icon. Unplugging the cable and re-inserting the cable fixed it.
Note that new high quality cables can exhibit the same issue.
You have nothing to lose... Give it a shot.
Good luck.
----
Sent from my ICS HD2 with XDA Premium
Nigeldg said:
I have not had to do this and am unsure as to how to do it but there are tutorials. It seems simple enough.
Click to expand...
Click to collapse
Take out battery, plug chopped up USB cable into wall charger, use fingers to hold red to + black to -, count to twenty, battery in phone, phone into bootloader, real charger cable into phone and wall charger, leave 10 mins, reboot into android. (Can charge all the way in bootloader, but it seems slower than when android is running.)
samsamuel said:
Take out battery, plug chopped up USB cable into wall charger, use fingers to hold red to + black to -, count to twenty, battery in phone, phone into bootloader, real charger cable into phone and wall charger, leave 10 mins, reboot into android. (Can charge all the way in bootloader, but it seems slower than when android is running.)
Click to expand...
Click to collapse
By 'tutorials on how to do this' I basically meant your posts
As previously said if you're using magldr you need to be booted into Android before the phone will charge. You can try to warm the battery up in your hands to squeeze the last bit of power out of it to boot up. Or there are standalone hd2 battery charges you can buy from eBay that charge your battery outside of the phone, they're pretty cheap.
Sent from my HTC HD2 using XDA App
As Samuel said you can charge phone in bootloader. Just try!
Had to buy external charger
item # M00366 this charger was cheap has led's that change from red to blue as the battery charges and has a usb port so you can charge a battery in phone at the same time.
I'd been alternating tween an extended battery and the original when my HD2 started discharging while plugged in. same batteries and nearly a year of typhoon's excellent ROM progression then wham dead batteries....

Phone stops charging

My S4 has developed a problem where it seems to stop charging overnight, leaving me with a low battery in the morning. When I plug it into the charger the red light comes on, but when I return in the morning it has stopped charging and the battery has lost 20% of its charge.
A different USB cable, plugged into the same charger, seems to be charging it for now. Does this mean that the original cable is faulty, or do I need to get the USB connector on the phone checked out?
itm said:
My S4 has developed a problem where it seems to stop charging overnight, leaving me with a low battery in the morning. When I plug it into the charger the red light comes on, but when I return in the morning it has stopped charging and the battery has lost 20% of its charge.
A different USB cable, plugged into the same charger, seems to be charging it for now. Does this mean that the original cable is faulty, or do I need to get the USB connector on the phone checked out?
Click to expand...
Click to collapse
Maybe there is overheating problem so phone stops charging process. Try to start charging and observe it. When it stops charging again, check if it is hot.
Diamond 2 owner said:
Maybe there is overheating problem so phone stops charging process. Try to start charging and observe it. When it stops charging again, check if it is hot.
Click to expand...
Click to collapse
Seems to be, i've noticed this myself too on days my room is very hot. Ever since i've undervolted a little it hasn't happened again.
Sent from my GT-I9505 using xda app-developers app
Kenablo said:
Seems to be, i've noticed this myself too on days my room is very hot. Ever since i've undervolted a little it hasn't happened again.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
First make sure that phone is placed on clean, flat surface with good air flow. Worst case is placing it on bed, blanket or pillow - it will overheat for sure.
Undervolting will not help a lot, as it only affect CPU/GPU heating, while they are usually idling during charging. Main source of heat in that situation is not a CPU/GPU but charging itself.
If you have really high room temperature, and you can do nothing about it, than you can slow down charging process, so it will decrease charging heating. Just use regular USB port (computer or generic USB charger) instead dedicated Samsung S4 charger. Charging current will be decreased from 1.9A to 500mA.
If you want to have more control over charging and temperatures you could install Battery Monitor Widget Pro (https://play.google.com/store/apps/details?id=ccc71.bmw.pro). See example of data which you can got with on wireless charging thread: http://forum.xda-developers.com/showpost.php?p=43224425&postcount=1018
My battery temperature goes up to 35C during charging (wireless charging).
The theory re. heat is interesting, but doesn't seem to explain why switching USB cables fixed the problem immediately in this case. Is the S4 particularly sensitive to the fit of the USB cable in the socket??
itm said:
The theory re. heat is interesting, but doesn't seem to explain why switching USB cables fixed the problem immediately in this case. Is the S4 particularly sensitive to the fit of the USB cable in the socket??
Click to expand...
Click to collapse
No, S4 is not particularly sensitive to the fit of the USB cable in the socket.
Keep in mind, that max charging current on S4 is based on detection routine which tries to figure it out what is phone connected to (is it regular USB port specified for up to 500mA or dedicated 2 amps charger). It is necessary to accomplish down compatibility with generic USB hosts (you can connect S4 to every USB device) and fast charging feature (less then 2h charging time).
So, you can say, that S4 is sensitive to USB cable/device type. Switching from dedicated cable/charger to 3rd party, could decrease charging current and generated heat.
I hope, this theory explains all your doubts
Diamond 2 owner said:
No, S4 is not particularly sensitive to the fit of the USB cable in the socket.
Keep in mind, that max charging current on S4 is based on detection routine which tries to figure it out what is phone connected to (is it regular USB port specified for up to 500mA or dedicated 2 amps charger). It is necessary to accomplish down compatibility with generic USB hosts (you can connect S4 to every USB device) and fast charging feature (less then 2h charging time).
So, you can say, that S4 is sensitive to USB cable/device type. Switching from dedicated cable/charger to 3rd party, could decrease charging current and generated heat.
I hope, this theory explains all your doubts
Click to expand...
Click to collapse
Thanks for the explanation - it certainly does help. It looks as if the flaw may be with the detection routine, which was preventing it from charging when connected to the stock charger/stock cable, but was happy to allow it when using a different cable with the stock charger.
It also explains another anomaly - when using the S4 as a Sat Nav in the car with a TomTom High-Speed multi charger the phone will only charge if the screen is turned off. With the screen on it actually loses charge.
Is there any way to "hack" this logic to eradicate these anomalies and ensure that the phone charges when you want it to? Or could it be that there is actually a fault with my phone that needs to be checked out?
I suspect this may not be normal...I've just plugged the phone into the stock charger/cable. The phone/battery are not remotely warm, but the phone isn't charging, even though the battery icon in the notification bar says that it is (there's a lightning bolt in the battery icon but it just lost 1% charge in 2 mins with the screen turned off).
The LED went red when I first plugged it in, but the red light went out after a minute, although the lightning bolt remained in the battery icon in the notification bar.
???
itm said:
I suspect this may not be normal...I've just plugged the phone into the stock charger/cable. The phone/battery are not remotely warm, but the phone isn't charging, even though the battery icon in the notification bar says that it is (there's a lightning bolt in the battery icon but it just lost 1% charge in 2 mins with the screen turned off).
The LED went red when I first plugged it in, but the red light went out after a minute, although the lightning bolt remained in the battery icon in the notification bar.
???
Click to expand...
Click to collapse
At this point it sounds like you have a defective battery/phone Anyway, here's a sample test you can try:
Get this app: Galaxy Charging Current Lite
With the stock charger/cable you should be seeing (remember to keep refreshing):
- Not charging - -
- Screen on - 1200 mA
- Screen off - 1900 mA
(yes, there's a difference in the charging current depending on whether the screen is off or on)
Plugged to a standard USB port: 460 mA
Plugged to a car charger - depends on the output of the charger - most car chargers are 1A these days
Try with different cables plugged into a PC USB port - you should be getting a constant 460 mA charge. If it stops as described and you tried a few cable it's likely the battery/phone. HTH
Breach1337 said:
At this point it sounds like you have a defective battery/phone Anyway, here's a sample test you can try:
Get this app: Galaxy Charging Current Lite
With the stock charger/cable you should be seeing (remember to keep refreshing):
- Not charging - -
- Screen on - 1200 mA
- Screen off - 1900 mA
(yes, there's a difference in the charging current depending on whether the screen is off or on)
Plugged to a standard USB port: 460 mA
Plugged to a car charger - depends on the output of the charger - most car chargers are 1A these days
Try with different cables plugged into a PC USB port - you should be getting a constant 460 mA charge. If it stops as described and you tried a few cable it's likely the battery/phone. HTH
Click to expand...
Click to collapse
Thanks. The Galaxy Charging Current Lite app shows:
- Connected to stock charger, screen on, with stock battery: a steady 340
- Connected to stock charger, screen off, with stock battery: 380
- Connected to PC USB port, with stock battery: 460
- Connected to car charger, with stock battery: 500
- Connected to stock charger, screen on, with 3rd party battery: a steady 300
Can I assume from the above that the phone is faulty?
itm said:
Thanks. The Galaxy Charging Current Lite app shows:
- Connected to stock charger, screen on, with stock battery: a steady 340
- Connected to stock charger, screen off, with stock battery: 380
- Connected to PC USB port, with stock battery: 460
- Connected to car charger, with stock battery: 500
- Connected to stock charger, screen on, with 3rd party battery: a steady 300
Can I assume from the above that the phone is faulty?
Click to expand...
Click to collapse
I just tried a few different USB cables with the stock charger - these gave me interesting results:
- Cable 1 : 1200
- Cable 2: 1200
- Cable 3: 420
So maybe it's the stock cable that's the problem?
itm said:
Thanks. The Galaxy Charging Current Lite app shows:
- Connected to stock charger, screen on, with stock battery: a steady 340
- Connected to stock charger, screen off, with stock battery: 380
- Connected to PC USB port, with stock battery: 460
- Connected to car charger, with stock battery: 500
- Connected to stock charger, screen on, with 3rd party battery: a steady 300
Can I assume from the above that the phone is faulty?
Click to expand...
Click to collapse
Actually it looks like more of a problem with your stock charger (as you're getting normal charge from a USB port)!
- Are you using the same cable with your stock charger, when connected to the PC USB port and your car charger? Try a different cable in all this scenarios to rule out the cable as a factor.
- What I'd recommend is to find another stock charger - go to a Samsung shop / service center - ask to test on site and see what input your phone is getting. You may test with any other mains charger but as you need to be sure of the power it delivers I'd test with an official Samsung 2A charger. If you don't get 1200/1900 with another official charger (and a working cable) then it's an issue with the phone/battery.
Re your car charger. It's possible that your car charger is 500 ma only (check the writing) if it's 0.5 A you need a new one (get a 2A one). Is it a real 12V cigarette charger or are you plugging the cable in a USB port on your car?
---------- Post added at 12:15 PM ---------- Previous post was at 12:11 PM ----------
itm said:
I just tried a few different USB cables with the stock charger - these gave me interesting results:
- Cable 1 : 1200
- Cable 2: 1200
- Cable 3: 420
So maybe it's the stock cable that's the problem?
Click to expand...
Click to collapse
There you go I fried two old cables already so not all of them can sustain the 2A charge. Use Cable 1 or 2. Make sure it also charges at 1900 ma - plug it in, open the app, refresh so that it shows 1200 ma. Turn the screen off. Give it 5 seconds (red led should turn on). Turn the screen back on. immediately refresh - you should see 1900.
I'm getting 1200/1900 from the stock charger if I use "Cable 1" or "Cable 2" as referred to above, so I guess that indicates that the charger is OK? (the stock cable only gives 300 from the same charger)
I'm surprised that I can only get 500 from the car charger using Cable 1/2, as it is advertised as having a 2amp port. In fact I get a higher charge rate (740) using the "slower" port on the TomTom charger - i.e. the port labelled "high-speed" actually delivers less current.
???
Yes cable 3 has gone bad. You should be good with the others.
Re the car charger - is 500 all you get with cable 1 or 2? Is the charger rated 2A for Android phones? Note that some high current chargers are high current only for Apple products and default to much lower output with non Apple products. It can also be a bad charger.- I had a defective 2A Anker car charger which wouldn't charge above 760. I RMAed it and the replacement works as intended.
Sent from my GT-I9505 using xda app-developers app
Breach1337 said:
Yes cable 3 has gone bad. You should be good with the others.
Re the car charger - is 500 all you get with cable 1 or 2? Is the charger rated 2A for Android phones? Note that some high current chargers are high current only for Apple products and default to much lower output with non Apple products. It can also be a bad charger.- I had a defective 2A Anker car charger which wouldn't charge above 760. I RMAed it and the replacement works as intended.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
I can get 1200 from the car charger with Cable 1. It's rated at 2A for TomTom devices.
Now this is bizzarre...I just took delivery of a brand new Nexus 10 and immediately tried the charger and cable from that with the Galaxy S4 - I only got 300ma. Can this really be coincidence??
Yes, weird. What about the the other way around - not sure whether the app will work on the Nexus but you can try. Try the S4 charger and cable with the Nexus.
Sent from my GT-I9505 using xda app-developers app
Breach1337 said:
Yes, weird. What about the the other way around - not sure whether the app will work on the Nexus but you can try. Try the S4 charger and cable with the Nexus.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
The Galaxy Charging Current App doesn't work on the Nexus 10 for some reason - it doesn't respond to a charger being connected to it
Can Samsung really be shipping dodgy cables on a mass scale?
itm said:
The Galaxy Charging Current App doesn't work on the Nexus 10 for some reason - it doesn't respond to a charger being connected to it
Can Samsung really be shipping dodgy cables on a mass scale?
Click to expand...
Click to collapse
I doubt it. No surprises that the app doesn't work on non-Galaxy devices.
By the way how did you try the cable from the Nexus? Isn't is a pogo cable (the wider one)?
Breach1337 said:
By the way how did you try the cable from the Nexus? Isn't is a pogo cable (the wider one)?
Click to expand...
Click to collapse
No it's a standard Micro USB.
itm said:
No it's a standard Micro USB.
Click to expand...
Click to collapse
If you get the same low charge rate with the Nexus charger/cable I'd take it to Samsung and show them the charge rate you're getting. Even if it works with another cable something is definitely not right - let them figure it out.

Categories

Resources