No Mobile Data after flashing latest LeeDroid ROM - Desire HD General

I just flashed to the lastest LeeDroid ROM. I love it! However, there is no mobile data. I cannot make or receive calls. The mobile data setting is greyed out, I cannot change anything there.
I've tried searching for similar problems with leeDroid, but I have not found much. Does anyone know how I can fix this??
HTC Inspire 4G on AT&T network.

Full wipe and re-flash, and see if that works.
If not it's possible you have an incompatible radio/ril/rom combination; make sure you use the recommended radio for your rom.
I try to avoid flashing radios as much as possible because if something goes wrong, it will permanently brick - so read all the instructions *very* carefully and only do it if you have to!

I installed that ROM too and lost my data connection. But there is a patch, V5.1.1 that'll correct this problem. Just download and flash it in cwm.
Sent from my HTC Desire HD A9191 using Tapatalk

Open the dialpad,
key in : *#*#4636#*#*, as soon as you key in last *, Setting Menu will pops up.
>> Click "Phone Information'
Scroll down.... until you see "Set preferred network type", probably set to "WCDMA preferred".
If you are on GSM network, change to "GSM auto (PRL).
Out from the menu... then see whether mobile signal on...
to make sure, re-boot.
Some rom, even set "WCDMA preferred" as a default, still can connect to GSM network some doesn't.... So manually set as above will be the best way, I think.
Hope can be solved, buddy.

sounds like the radio needs a re-flash, flash the recommended or latest one.

Install Latest update on your Rom
zunaedsaki is cooking

im having the same problem. For whatever reason clockworkmob wont let me flash any ROMS at all. i dont understand what the deal is.

Guys, i had this problem on my I9001 but the solution is very simple...
1. Get an android phone (your dads, sister's or brothers or whoever's) and insert your sim in it then browse to APN settings.
2. Copy down the information.
3. Insert your sim back into your phone.
4. Go to APN settings and manually type all the information
you will get your mobile data working...

Related

not getting 3g at all after rom update

as above it wont recieve 3g been into settings mobile networks on.
I'm having some issues as well. While I am getting a 3G connection, it often drops to EDGE suddenly. This even happens when I'm at home - and home being down town in a big city with constant 3G pre-update.
Asked HTC support. They told me to contact HTC support. True story.
Thinking I might install a custom rom and/or change radio. Any advice?
woobit said:
Thinking I might install a custom rom and/or change radio. Any advice?
Click to expand...
Click to collapse
Try updating ur radio.
olly_p said:
as above it wont recieve 3g been into settings mobile networks on.
Click to expand...
Click to collapse
yes, if you have updated with the latest modaco, then probably your apn settings have been erased.
You'll have to input the apn manually to enable the 3g network
deeren said:
yes, if you have updated with the latest modaco, then probably your apn settings have been erased.
You'll have to input the apn manually to enable the 3g network
Click to expand...
Click to collapse
thanks all good now! happy bunny!
what radio are you using to get 3g??
thanx
deeren said:
yes, if you have updated with the latest modaco, then probably your apn settings have been erased.
You'll have to input the apn manually to enable the 3g network
Click to expand...
Click to collapse
How should i do that?
Could you please advise me and give me the proper steps to take...
Thank you in advanced.
i had similar problems and nothing helped. so at the end i did the following:
- complete data wipe via fastboot menu
- update.zip with modaco 2.2
- rebbot system, checked if apn settings are correct and working (3G symbol in notification bar)
- update.zip with modaco 2.3 (NO wipe!!)
so now everything works as it should.

[Q] "Emergency calls only" after RUU downgrade, root, Cyanogen 6.1 install

Hello,
I've just rooted my Legend for the first time. To do this, I downgraded to 1.31 via RUU, then rooted using the Modaco guide.
After the RUU downgrade, I noticed that the phone said "Emergency Calls Only". Being a complete noob, I continued along with the rooting process figuring that the root flash and later mod flash might fix the problem.
After the root, I still had emergency service only. Being excited that the root worked, I went ahead and installer Rom Manager, rebooted into Clockworkmod Recovery and installed Cyanogen 6.1.
Still "emergency calls only".
I looked in Network Operators to see if my provider (Bell Canada) was visible. Sure enough, it was there. I tried to join the mobile network but the device just sits there spinning until it times out. I set the correct APN settings, but of course that didn't help - I basic GSM service doesn't work, let alone 3G.
I then found an app called Secret Settings, which gives access to a bunch of nifty hidden configuration options. I worked my way through each of the preferred network types. None of them worked.
I assume that this has something to do with the radio firmware flashed during the downgrade, although it looked like radio was also flashed during root.
So here I sit with a fancy WiFi-only device that used to be a phone. Can this be fixed? What are my options?
Please help a very technical but new-to-android-modding noob out. Thanks in advance!
Well, I seem to have fixed my own problem. Awesome!
Bell Canada HTC Legend users - if you've downgraded, rooted and are finding you have no service, or emergency only service...
Download "Secret Setting" from the market.
Tap Phone Information
Scroll down to "Set preferred network type"
Select "GSM/CDMA auto (PRL)"
Exit to the home screen
In your phone's Settings menu, select Wireless and Networks
Select Mobile Networks -> Network Operators
Make sure you're connected to Bell
Reboot
Dial *#*#4636#*#* on your Phone, it does the same thing as "Secret Settings" and doesn't require you to install anything.
It's been listed a number of times on the forums. You also don't need to reboot to change to GSM/CDMA auto PRL, although you probably want to select WCDMA only.

No data connection after rooting to custom rom (Darky's v5.6)

I'm new to flashing custom roms and what not. I used odin and flashed everything to the point, csc, modem,pda,pit the rom works awesome but i cannot for the life of me connect to the internet. the 3g icon or h icon wont' show up. in the status it says my network type is gprs and i'm roaming and my mobile network state is disconnected.
I'm with fido, the phone is unlocked i have never had trouble with data or anything until i flashed to a custom rom.
Anyone have the same problem or suggest how to fix?
Data Conn. Issue
Hey mate,
Have you gone into 'Settings', 'Wireless and Networks', 'Mobile Networks' and then 'APN settings' and entered your appropriate settings?
That should fix it if you define the correct access point.
Alex
hey man, yeah i did all that stuff, went in there, found my carrier, put in all the apn settings i can find and still nothing. when i put data roaming on then i get data and the edge icon comes up.
Hey dude,
That sounds strange, flashing custom (or even release) roms is never a guarantee especially with weaknesses in the way that ODIN communicates with your phone, What I would do is Re-Flash your stock rom through ODIN then use the "quick" install method from Darkyy.
I am running 5.6 like you, and I had issues doing it through odin (I kept getting random FC's), additionally, the rom; if installed from CWM will keep your apns and apps e.t.c. along with many settings and configs from the base rom you're using before the flash.
That is the best advice I can give you.
Alex
My config is a follows:
I9000 International
16gb SDHC
500HZ Hardcore Kernel
Darkyy 5.6
Whats the process for reverting back to stock 2.1 eclair rom?
Did you keep a record of your firmware version before reflashing?
If not, you may have to ask someone on here what your base firmware was.
Are you familiar with using ODIN? (The software used for reflashing)
Alex
I am having same issue to...I used 5.4 from Darky and it works well...same with DocRom 4.0 works and the next 5.1/6.0 don't work.
Both Darkys and DocRom are based some JPX....which seem to be root cause..
I've have the same problem. Tried eveything but still didn't work. So went to Samsung Service Centre to have my SGS firmware refresh. I notice after the refreshed same issue of data com missing. Told them and they when into the SGS to select the telco operator setting selection. Now data com. working well. Anyone know the SGS handset setting code? I want to reload to Darky's v5.6 again.
hi folks
i have the same problem... my provider is a virtual provider in the network of our biggest provider here in austria. i was using doc's rom based on xwjpa firmeware and everything worked fine without enabled roaming options.
since doc's rom is based on the newer releases (xxjpx, xxjpy) i' only able to use data connection if i turn on roaming. it also shows me that i'm in a roaming network. i guess the cause are the xx firmwares. xw and xx are european firmwares but i do not know the differences between them. maybe someone has more information about the differences? currently i'm using xwjpa firmware because i don't want to use my phone with enabled roaming options.
hey um i'm having the same problem and thought replying here would be better than starting a new thread.
well i installed the rom without having any idea of what i was doing *stupid idea* so i didn't take note of my original firmware.
i didn't use odin to install the rom just clockwork recovery and the rom and everything installed fine except my data network. i can get signal, call, receive the only problem is i get no data transfer. any help much appreciated. if anything can someone help me step by step to reboot my phone to original?
just for future travellers
Sadly this isn't my own gem, but yeah. hold the power button down, wait for the shutdown menu, above the airplane mode there is a data network button, and it'll most likely say "de-activated" if nothing else has worked. Its ok to feel like a chump, I did after rehashing the hell out of this phone for a few days ( the wifes phone, my phone does exactly what its told. )
Anyway, yeah, this will probably be the reason for the lack of the icon "G", "3G" or "H" where it should be.
Dave.

GT-i9505 No mobile network/data after flashing custom ROM

Hi guys been searching all day when I can grab some free WiFi, basically I rooted my s4 gti9505 with auto root and then installed custom recovery, and flashed PAC rom. I'm unable to make calls or receive mobile data but can use WiFi. My settings say baseband unknown .. I'll attach a picture of my settings here in this thread. I have attempted to flash a modem/radio in Odin but this didn't seem to make any difference, the problem is I'm not sure if it was the right thing to do (didn't make a back up of my phone foolishly before flashing PAC rom)
I'd appreciate any help with this guys! My network is vodaphone UK if that makes any difference to any advice given...
Thanks in advance!
Sent from my GT-I9505 using xda app-developers app
somepepe**** said:
Hi guys been searching all day when I can grab some free WiFi, basically I rooted my s4 gti9505 with auto root and then installed custom recovery, and flashed PAC rom. I'm unable to make calls or receive mobile data but can use WiFi. My settings say baseband unknown .. I'll attach a picture of my settings here in this thread. I have attempted to flash a modem/radio in Odin but this didn't seem to make any difference, the problem is I'm not sure if it was the right thing to do (didn't make a back up of my phone foolishly before flashing PAC rom)
I'd appreciate any help with this guys! My network is vodaphone UK if that makes any difference to any advice given...
Thanks in advance!
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
flash MGA modem twice with odin (first time do not tick "auto-reboot", when it "pass" remove battery, insert it flash second time)
This things happend when people move from old baseband to new baseband
samersh72 said:
flash MGA modem twice with odin (first time do not tick "auto-reboot", when it "pass" remove battery, insert it flash second time)
This things happend when people move from old baseband to new baseband
Click to expand...
Click to collapse
hi thanks for your reply, i have just flashed the MGG modem trying to fix it myself but when i reboot myself manually it just hangs on the samsung boot logo for ten minutes..i will try your method with the MGA modem and hope it works
thanks
somepepe**** said:
hi thanks for your reply, i have just flashed the MGG modem trying to fix it myself but when i reboot myself manually it just hangs on the samsung boot logo for ten minutes..i will try your method with the MGA modem and hope it works
thanks
Click to expand...
Click to collapse
and reflash the custom rom after flashing the modem
samersh72 said:
and reflash the custom rom after flashing the modem
Click to expand...
Click to collapse
will do this too, have just finished flashing MGA modem twice using your steps, will flash rom again..i wonder if i should wipe/factory wipe as i would when installing new rom...ill try it!
no luck -still no network. im running out of ideas
network - unknown
mobile network type - unknown
imei unknown
imei sv - unknown
going out now for a while but thought id ask - do you think that installing official stock rom (perhaps from your s4 unrooting guide) would help flashed via odin? from searching i can see that some folk suggest that stock will reinstall everything i need...im hoping so, i really wouldnt mind going back to stock, anythings better than this
somepepe**** said:
will do this too, have just finished flashing MGA modem twice using your steps, will flash rom again..i wonder if i should wipe/factory wipe as i would when installing new rom...ill try it!
no luck -still no network. im running out of ideas
network - unknown
mobile network type - unknown
imei unknown
imei sv - unknown
Click to expand...
Click to collapse
did you put modem in "phone" in odin?
hmmm weird! i guess your imei is not corrupted, sometimes while flashing rom in cwm, efs partition is not detected, so flashing modem twice should work
you can try with an other modem, use new one (but im sure to flash it twice)
another option is trying to flash your stock firmware
samersh72 said:
did you put modem in "phone" in odin?
hmmm weird! i guess your imei is not corrupted, sometimes while flashing rom in cwm, efs partition is not detected, so flashing modem twice should work
you can try with an other modem, use new one (but im sure to flash it twice)
another option is trying to flash your stock firmware
Click to expand...
Click to collapse
yes put it in "phone" mode, thats the second or third one i have flashed now so im not sure it wont help but for sure ill try again!
are you able to determine that its not corrupted? would it state as such if it were? im going to flash a stock firmware as a last resort. lost after that haha
edit - installed cwm using sgs4 flasher and re-installed my custom rom and gapps, booted no probs and network now working - sorted!! thanks for your help i dont think i would have reflashed the rom without your advice to do so
So I'm practically in the same boat. I'm currently on P.A.C. man nightly 09/18 (Vodafone Germany branded device). I never had similar problems, but now I can't call (or be called) and I'm not able to use mobile data.
I nearly tried everything:
1) I checked the IMEI (saved it before switching over to custom roms), but an IMEI number is still there.
2) Went back to stock to see if it's a problem of P.A.C. man ROMS or not. On stock it didn't work either.
3) Went back to P.A.C. man ROM and flashed modem XXUBMF8 via Odin 3.04 (from this thread: http://forum.xda-developers.com/showthread.php?t=2192025)
4) Flashed the modem again after I flashed the ROM because it didn't work either.
So I'm completely lost now, I really don't know what to do next. I had mobile data for a couple of seconds every now and then, but nothing stable. And since the problem came up (yesterday evening) I can not make any calls at all.
Can someone help me?
Edit: The very strange thing is that I have full reception balks in the notification area (only in grey). But still, I guess this means that the device is somehow able to detect a signal but can not connect to it?
Edit2: I apparently have no Device-ID. May that be a problem?
So I took some screenshots to show you guys my problem a bit better. For some reason my mobile data now works (currently HSPA, but it's extremely slow). But I still can't make any calls (or get called too). =/
Edit: So to sum this up: the strangest thing about this problem is, that even when I go back to full stock I can't make calls. =/ What could be the problem? An IMEI number is present in the settings (althouh the 'IMEI SV' under 'About phone' --> 'Status' was one digit below the current one that I can see under those stats). The whole problem makes me believe that my provider can't sort my phone number to my device (I'm on Vodafone; but if that's really the case: why the hell does mobile data works sometimes?!). The other possibility: something with the modem/radio is broken. Could this be the problem? The thing is that I also tried to flash a custom modem, but the problem is still there...
I'm really concerned that my phone just became an expensive paperweight
Slightly different than my problem in that I didn't even have any bars for reception..my problem was fixed by changing the custom recovery software (originally I used philz to flash PAC), But I flashed cwm and then used this to again flash PAC, and all was good..don't ask my why but it helped me so you might want to try this...
Sent from my GT-I9505 using xda app-developers app
somepepe**** said:
Slightly different than my problem in that I didn't even have any bars for reception..my problem was fixed by changing the custom recovery software (originally I used philz to flash PAC), But I flashed cwm and then used this to again flash PAC, and all was good..don't ask my why but it helped me so you might want to try this...
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thank you for your answer!
You also flashed a different modem didn't you? Did this help or was it only the custom recovery? I'm confused because I used CWM before and never had problems. But then this mess all came up...
Yes I flashed several modems, that didn't help..only using a different custom recovery to flash my custom Rom again helped..hope you get sorted!
Sent from my GT-I9505 using xda app-developers app
So I tried to flash PAC with TWRP 2.6.0 (it worked before), but the problem is still there.
I'm really confused. I really don't know what I can do or try to fix this mess... Is there some USSD code or something to find out if my device is missing some ID codes or if the modem is messed up or something?
Edit:
Update: For some reason I now can receive calls/SMS but only when I'm on GPRS speed. Outgoing and ingoing calls are no problem then. When my device is on HSPA or HSPA+ speed however, the old problem of not being able to call or be called is back. On one hand it's good that I'm somehow able to make calls again on the other hand it gets stranger and stranger. I know that it's a bug on PAC man ROMs that you can't change the mobile data speed options (LTE/HSPA/GPRS etc.), but I think that this could be the problem (or at least a part of it)...
Gotcher said:
So I tried to flash PAC with TWRP 2.6.0 (it worked before), but the problem is still there.
I'm really confused. I really don't know what I can do or try to fix this mess... Is there some USSD code or something to find out if my device is missing some ID codes or if the modem is messed up or something?
Edit:
Update: For some reason I now can receive calls/SMS but only when I'm on GPRS speed. Outgoing and ingoing calls are no problem then. When my device is on HSPA or HSPA+ speed however, the old problem of not being able to call or be called is back. On one hand it's good that I'm somehow able to make calls again on the other hand it gets stranger and stranger. I know that it's a bug on PAC man ROMs that you can't change the mobile data speed options (LTE/HSPA/GPRS etc.), but I think that this could be the problem (or at least a part of it)...
Click to expand...
Click to collapse
Actually I can change the data in my phone between 3G and 2G (don't have LTE support here in my country)
Have you checked your APN? Think that might be a problem.
Also please post the steps you take before flashing PAC (ROM, kernel, recovery, etc)
soyusado said:
Actually I can change the data in my phone between 3G and 2G (don't have LTE support here in my country)
Have you checked your APN? Think that might be a problem.
Also please post the steps you take before flashing PAC (ROM, kernel, recovery, etc)
Click to expand...
Click to collapse
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Install stock ROM
Gotcher said:
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Click to expand...
Click to collapse
Mate you should try installing Stock ROM that might help I think !
.::Alien::. said:
Mate you should try installing Stock ROM that might help I think !
Click to expand...
Click to collapse
I tried that already, but it didn't help. Same problem...
I factory resetted the phone, wiped cache and dalvik cache and then flashed my Vodafone branded stock ROM via Odin that I had on my device when I got it. Didn't help for some reason... But: should I also try to go back to stock ROM via KIES? I haven't tried this method until now...
Edit: About my flashing method: I went from the stock ROM to rooted (via CF Auto root with Odin). For PAC I then flashed TWRP 2.6.0 and then in recovery factory resetted the phone, wiped cache and dalvik and then installed PAC. After that I installed GApps. I used this method before and it worked without any problems...
Edit2: I found this thread, it appears to be the same/a similar problem with the S3: http://forum.xda-developers.com/showthread.php?t=1805709&page=6
Now is there something similar for the S4? I think I tried calling ##72786# on stock ROM and it didn't work...
Gotcher said:
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Click to expand...
Click to collapse
Delete the unused APNs.
Do you have mobile data?
Also I asume that you're running the latest vertigo's build, because with me GSM/WCDMA/LTE is always selected.
Sent from my GT-I9505 using Tapatalk 4
Sometimes I have mobile data, but only for very limited time; for the majority of time, I don't have mobile data and can not make calls.
I also tried to delete the unused APNs, but still no change =/
I tried to use a different Micro SIM in this device, but the same problem appears. No data, no phone although I have grey reception balks.
any update on this one?!

software unlock

I did the software unlock via the dial code & UMTS menu, I can make phone calls with a different carrier sim, but I cannot get the data to connect. I have been searching xda and google for months trying to get this to work. I have a Canadian Bell mobilty i337m. Stock rom (mdj) and its rooted. I have tried factory reset several times but it doesnt fix it. I also tried flashing back to stock with odin. Does anyone have any other ideas?
When I try a telus (or other provider) sim, it give me voice service only and in the about > status menu the mobile network state either says disconnected or connecting. I have the data toggle on also.
Those unlocks don't work that well with the Canadian variants. They're designed for the i337 not the i337m.
Have you made sure the apn is set up right for the carrier?
Maybe this will help
Code:
http://apn-settings.com/canada/apn-settings-bell-mobility/
I will say the reason that cause the problem is that this is an ATT phone with At stock ROM. So it doesn't have the APN setting for other carries. You should set that by yourself.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ve6ay said:
Those unlocks don't work that well with the Canadian variants. They're designed for the i337 not the i337m.
Click to expand...
Click to collapse
ksj0823 said:
I will say the reason that cause the problem is that this is an ATT phone with At stock ROM. So it doesn't have the APN setting for other carries. You should set that by yourself.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Not true. I successfully unlocked my first S4 I337M on Bell following this tutorial. I sold that one because I was able to make a profit once I unlocked and flashed the AWS mod to make it compatible with WIND and Mobilicity.
simplywinter said:
I did the software unlock via the dial code & UMTS menu, I can make phone calls with a different carrier sim, but I cannot get the data to connect. I have been searching xda and google for months trying to get this to work. I have a Canadian Bell mobilty i337m. Stock rom (mdj) and its rooted. I have tried factory reset several times but it doesnt fix it. I also tried flashing back to stock with odin. Does anyone have any other ideas?
When I try a telus (or other provider) sim, it give me voice service only and in the about > status menu the mobile network state either says disconnected or connecting. I have the data toggle on also.
Click to expand...
Click to collapse
Try reflashing the original 4.2.2 firmware from here and then immediately follow this tutorial before rooting (do not install any system updates!). Then you can root, install custom recovery, reset the flash count, etc.
All questions and help issues go in Q&A and Help section
Thread moved
Thanks
FNM
MrKhozam said:
Not true. I successfully unlocked my first S4 I337M on Bell following this tutorial. I sold that one because I was able to make a profit once I unlocked and flashed the AWS mod to make it compatible with WIND and Mobilicity.
Try reflashing the original 4.2.2 firmware from here and then immediately follow this tutorial before rooting (do not install any system updates!). Then you can root, install custom recovery, reset the flash count, etc.
Click to expand...
Click to collapse
You did exactly what I am in the process of doing. I will try what you suggested now. Thanks!
Also, ive manually inputed apns for telus and eastlink and neither seem to work. I can always make voice calls, but the data will not connect.
ksj0823 said:
I will say the reason that cause the problem is that this is an ATT phone with At stock ROM. So it doesn't have the APN setting for other carries. You should set that by yourself.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
oddly enough, when I put a telus sim in it and waited for a while (in hopes it would eventually connect to data) and the apn settings for telus were in the phone. I know I didnt put them there because the apn settings for koodo were also present along with a third apn that I cant remember.
For future reference, try not to double post. Just edit your current post.
simplywinter said:
oddly enough, when I put a telus sim in it and waited for a while (in hopes it would eventually connect to data) and the apn settings for telus were in the phone. I know I didnt put them there because the apn settings for koodo were also present along with a third apn that I cant remember.
Click to expand...
Click to collapse
It's actually not an odd thing to happen. Once an activated SIM is inserted and the phone is unlocked, the phone searches for the best APN settings from all compatible carrier bundles. Some phones do this more accurately than others. However, it may not do this well enough if a custom ROM is installed. I know this to be true because this happened with my older Galaxy S3 when I tried selling it to someone (it was a T-Mobile unlocked running CM 10.0 at the time). However, setting the APN manually (assuming all settings are correct and that nothing else is wrong with the phone) should resolve your issues.
If you're still having problems, I suggest doing these things:
1. Try going into your network operators and let the phone search for carriers nearby. Once the list shows up, tap on Telus and wait until that screen closes on its own.
2. If you can't get data going yet, try disabling it, re-enabling, and reboot.
3. If this still doesn't work, try going into the network mode screen and select GSM/LTE and reboot.
4. If it's still derping on you, then it must either be your SIM not connecting to Telus's data network, or your account has a data block. That's all I can really think of.
Good luck.
MrKhozam said:
For future reference, try not to double post. Just edit your current post.
It's actually not an odd thing to happen. Once an activated SIM is inserted and the phone is unlocked, the phone searches for the best APN settings from all compatible carrier bundles. Some phones do this more accurately than others. However, it may not do this well enough if a custom ROM is installed. I know this to be true because this happened with my older Galaxy S3 when I tried selling it to someone (it was a T-Mobile unlocked running CM 10.0 at the time). However, setting the APN manually (assuming all settings are correct and that nothing else is wrong with the phone) should resolve your issues.
If you're still having problems, I suggest doing these things:
1. Try going into your network operators and let the phone search for carriers nearby. Once the list shows up, tap on Telus and wait until that screen closes on its own.
2. If you can't get data going yet, try disabling it, re-enabling, and reboot.
3. If this still doesn't work, try going into the network mode screen and select GSM/LTE and reboot.
4. If it's still derping on you, then it must either be your SIM not connecting to Telus's data network, or your account has a data block. That's all I can really think of.
Good luck.
Click to expand...
Click to collapse
Ok, reflashed stock 4.2.2 (the first one) and manually entered TELUS apn settings from the telus website, got data to connect finally. As a note, there was a typo in the apn settings that it auto aquired for telus. Going to try a eastlink sim tomorrow and hopefully AWS is working.
Edit: all seems to work. thanks everyone!!

Categories

Resources