USB Not recognized - Nexus S General

Hi everyone,
My nexus s (Super Amoled) device can not recognized by computer when I plug into USB port since I upgraded to ICS 4.0.3. (battery does charge but % symbol does not appear)
I tried another port, another cable and another PC but result same. Searched for an answer but no luck
I think that is a software problem and now I just want to downgrade to 2.3.6 GB. How can I do that without using USB port? Can I do unlock bootloader without USB? then rooting and CWM?
Please help me, my phone looks like a huge brick without USB support

You cannot unlock bootloader without USB connection
Sent from my ice cream powered Nexus S

after flashing Milestone 3 of AOKP Rom, i got a similar problem. Although my device is being recognized by fastboot in the bootloader. But no USB mass storage mounting in Recovery either...

Got the exact same problem... Thought it was a faulty usb port, but maybe I should wait for next update to see if that fix something...

Related

[Q] Micro USB port not working

hello,
mi micro USB is not working propperly right now, for some reason it doesn´t charges correctly, it seems a little... "loose"... im currentl running CM 9 2012/05/26
and when it plugg it in the computer and manage it to start charging, it wont allow me to acces it as a mass storage device, in fact the computer wouldn´t recognize it at all!, any help!?
try another cable, or connecting it to other port after rebooting (usb musnt be connected)
Swyped off my Amazing Defy using ICS
happened with me too, got its motherboard replaced
crap... I`m rooted... so no warranty...
maybe in some repair shop of cellphones the will be able to replace it?
but.. did yours charged at all?
bacause mine does charges when appropietly connected... its just that sometimes it wont nad it will not allow me to get to the mass storage...
If your phone just charge but can't access to masive storage, look in the device manager , if you have a MTP device, your micro ubs port is fine, just try to install some stock rom.
it´s just that some times it doesn´t charges and I need to slowly start trying to adjust the micro USB port so it can charge... that´s why I say that it seems to be a little loose...
As well it will only charge when plugged into my XboX 360 or the computer (and some other devices) but not when plugged into the Stock charger... :S
Jkmoran said:
If your phone just charge but can't access to masive storage, look in the device manager , if you have a MTP device, your micro ubs port is fine, just try to install some stock rom.
Click to expand...
Click to collapse
now, exactly who should I look in the device manager if its MTP?
t
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
USB not working for flash
Hi everyone, I came with a similar issue.
The massive storage USB connection is not working for me, plus I can't flash a stock rom,
Currently I'm in MIUI for defy (and it's the only option I am able to install), I tried to wipe data cache to install cyanogenmod 7 from recovery but it's not working, it get stuck in the boot logo. I want to install cyanogenmod because it is fast than MIUI jelly bean.
My idea is to flash the device, but with the usb not working Im stuck,
any ideas to solve this? or should i go to have the usb repaired?
GabrielMercado said:
Hi everyone, I came with a similar issue.
The massive storage USB connection is not working for me, plus I can't flash a stock rom,
Currently I'm in MIUI for defy (and it's the only option I am able to install), I tried to wipe data cache to install cyanogenmod 7 from recovery but it's not working, it get stuck in the boot logo. I want to install cyanogenmod because it is fast than MIUI jelly bean.
My idea is to flash the device, but with the usb not working Im stuck,
any ideas to solve this? or should i go to have the usb repaired?
Click to expand...
Click to collapse
If after a boot in bootloader (power+vol-up) and connecting to PC via usb cable nothing appear onto PC display 3 possibilities exist.
1. Usb cable is broken.
2. Pc have no usb driver foryour device (but even in this case a error message appear)
3. Usb connector or circuitry fron Defy is broken.
Search.
Hi mates !
Please have a look to this fix: http://forum.xda-developers.com/showthread.php?t=2516956
I haven't picture posting permissions right now, but should be fixed soon
CJPJ said:
Hi mates !
Please have a look to this fix: http://forum.xda-developers.com/showthread.php?t=2516956
I haven't picture posting permissions right now, but should be fixed soon
Click to expand...
Click to collapse
Yes, is OK your method but is a little dangerous if you not cover the cleaned pins with some resin. More safe is to use a toothbrush soaked in isopropyl alcohol or 98% ethylalcohol to clean the soldered pins.
del//

The computer doesn't recognise nexus 10 on usb 3.0 port

My nexus 10 is only being charged when I connect it to my computer on usb 3.0 port, the computer doesn't recognise it as a storage so I cannot transfer files. My galaxy s3 is working fine with usb 3.0
They are both working fine on usb 2. Is that normal?
not normal, my Sony laptop with USB 3 port see Nexus just fine. Running all stock on Nexus. Weird.
I'm also on Stock rom, but the bootloader is unlocked and rooted.
Did you ever find a fix for this? I'm having the exact same issue after rooting...Tabelt and recovery work great only my computer is not picking it up as storage...
Not "normal", but quite common. It's not the Nexus 10s fault, USB 3.0 is very buggy depending on the chipset.

[Q] Windows will not recognize Note 3 anymore, help please!

Hey guys,
Just recently, my PC and any other PC Ive tried for that matter will not recognize my Note 3. I had Windows 7 and it worked fine for months, then just the other day it came up on the bottom as USB Device Not Recognized, and no matter what I do it will not do so. Yesterday, I upgraded to Windows 8.1 and still the same result. I have installed Kies 3, uninstalled and resintalled Samsung drivers and still nothing. I am running a custom rom in the stock slot using Safestrap...is it possible that that might have messed up something? Even when the cord is plugged into the PC, the phone doesnt come up with anything notification that it's plugged in, but it does say it is charging. If any of you have any tips or something please help because I am at my wits end.
Thanks
Have you tried with another cord?
Computer doesn't see device... Device doesn't detect plug in... Sounds like a bad USB cord
b00mb00mchuck said:
Have you tried with another cord?
Computer doesn't see device... Device doesn't detect plug in... Sounds like a bad USB cord
Click to expand...
Click to collapse
Yes, actually I have and still nothing...forgot to mention that in the original post.
It's a strange problem which leads me to believe that something has gone wrong in the phone, or that I caused something to go wrong by flashing a rom or three, since it did work previously. Unfortunately, I'm at status: Custom, although my Knox is 0x0.
When you dial ##366633# is it disabled?
Sent from my Galaxy Note 3
mexiking713 said:
When you dial ##366633# is it disabled?
Sent from my Galaxy Note 3
Click to expand...
Click to collapse
Yes, this shows as disabled. What should this be?
Can't help you solve your problem, but last night I had a hiccup where I plugged my (17 day old) N3 into my computer in a USB2 port and ... nothing at all. (As if it were electrically disconnected - no "unknown devices" showing)
Tried it in a different USB2 port, and ... nothing.
Tried in in a USB 3.0 port - same computer, same OEM cord - and everything was fine. As far as I knew, nothing had changed on either end of things, although the previous evening I had used a different OTG cable for a USB key with the phone, and I had also had a automatic update of the Samsung Push Service on the phone. Nothing had been plugged into the PC's usb ports since it's prior cold boot. (Win 7 x64 Pro).
This morning (both PC and phone have been rebooted), everything is back to normal - both on the phone and the PC. Both the USB2 and USB3 ports all seem fine.
Ugh. Makes me nervous - brand new hardware.
Boot into Odin mode THEN plug the device in, let windows find the drivers for it then once that's done, reboot the phone regularly and see if it works then. It appears to be an issue with most to ALL Samsung devices, but this worked for my wife's galaxy S3 when the computer wouldn't recognize it and the phone didn't detect a PC connection.
Sent from my SM-N900V using xda app-developers app
pmt223 said:
Hey guys,
Just recently, my PC and any other PC Ive tried for that matter will not recognize my Note 3. I had Windows 7 and it worked fine for months, then just the other day it came up on the bottom as USB Device Not Recognized, and no matter what I do it will not do so. Yesterday, I upgraded to Windows 8.1 and still the same result. I have installed Kies 3, uninstalled and resintalled Samsung drivers and still nothing. I am running a custom rom in the stock slot using Safestrap...is it possible that that might have messed up something? Even when the cord is plugged into the PC, the phone doesnt come up with anything notification that it's plugged in, but it does say it is charging. If any of you have any tips or something please help because I am at my wits end.
Thanks
Click to expand...
Click to collapse
Did you fix this problem?
Thank you! Worked perfectly!
I have the same problem, do you have any solutions ? Thanks.
I too have been struggling with this problem. The is no USB symbol in the notifications area on my phone whether I plug into to my computer at work (Win7) or at home (Win7), using a usb3 cable or a usb2 cable. Its as if there was a setting on my phone that allows recognition when plugged into a computer that has been turned off.Is there such a setting? I would love some help on this as well. Thanks in advance! I am rooted with towel root and have had no problems until last week. When I look in the device manager on my computer it shows :
SAMSUNG Android Phone
SAMSUNG Android ADB interface
I tried uninstalling the above and then plugging my phone back in and it re-installs the same driver shown above.
For what it is worth here are the drivers for SAMSUNG Android ADB Interface:
c:\windows\system32\DRIVERS\winusbsys
c:\windows\system32\WdfCoinstaller01007.dll
c:\windows\system32\WinUSBCoinstaller.dll
Should I be using different drivers ? Thanks|!
please help!
any solution yet? i have same problem, no usb detection and camera wont work i want to flash stock rom whit odin but i cant get the computer to recognize my phone...
I was able to fix the usb recognition problem. i had to do a factory restore. I lost root but gained usb recognition AND the Over the Air update to 4.4.4 and patiently awaiting the update to 5.0 hopefully this month!

[Q] No usb after 5.0.2

Hi i have a nexus 7 (2012) everything was working fine until android 5. The device was slow and almost unusable. Then the 5.0.2 update came out and guess what? I updated it and now my laptop wont recognize the device so i tried a different cable and nothing. I plugged the nexus 7 in my second computer and nothing not even the sound that means you plugged something in the usb port. So i went to my brothers house and tried his computer.... the same... nothing. We plugged his nexus 7 (2012) 5.0.2 wich is the exact same device as mine and it works so we thought that it was the usb connector on the device and we switched my connector with his....NOTHING happens. computer wont recognize the device, no sound, no pop-up, no ADB detection. Does anyone have the same problem or a solution on how to downgrade 5.0.2 back to 4.4 without usb cable?
Thank you
Did you tried out to start n7 into fastboot mode and recovery mode?
Is usb not available also there?
fastboot and recovery mode also has no USB. absolutely nothing happens. when i connect the device it charges but the lightning icon does not appear on the battery in the status bar. and its not the usb port on the N7 i changed it.
?????????????????
Same here
I have the same Problem - a N7 GSM with 5.0.2 and no communication via USB.
I have tried different computers with Win7 and Ubuntu14.10. As well as differnt cables. (And all combinations of that work with my HTC M7, by the way)
Under Linux, not even lsusb shows the device, or dmesg shows any connection to a usb device.
To be completly honest, I did not give much love to my N7, I have been using it hardly. But when I did, I have been flashing some differnt Roms and testing different bootloaders so this might be some kind of my fault.
i updated to 5,1 and still the same problem so i assume its hardware related. but i know it is not the USB connector because i tried it on my brothers N7. and it works
Mine is quirky, comp recognizes it and can order boot but sideload and push to device don't work. Its odd.

Nexus 4 5.1.1 LMY48T not recognized by PC at all!

Hello everyone I've got an issue with my Nexus 4 which is why I registered, as I simply don't know what to do anymore.
My Nexus 4 is not recognized via USB at all, there is no connection sound and ist does not appear in the device manager.
It is charging and does show USB charging if I tap the battery icon.
Things I tried:
Uninstall/Install Driver with and without WugFresh Toolkit (USBDeview)
different Pcs (different USB Ports)
different USB cables which all worked with other mobile devices such as Samsung S3/4/5 mini
checking and unchecking MTP,PTP and Usb debugging
fastbootmode
factory reset
replaced the USB flex cable as i figured it would be defect
I tried to root it with some of the apps available bur none of them work with LMY48T.
I think it might be firmware related but because I didn't flash a Custom Recovery the last time I rooted it I have no possibility to flash another rom.
The root access was lost when the last OTA Update arrived which is why I can't install a custom recovery via the clockworkmod Rom Manager.
The Pc I'm working with is running on Win 10 I'm running out of ideas.
Please help me, thank you

Categories

Resources