Database Users

allmost dead MAGIC

Hi there - Hope you can help me
2 weeks ago i got an HTC MAGIC with HERO ROM installed
I tryid to get a original MAGIC ROM in it, but it didn´t work.
Found a HTC HERO ROM at this site and tryid to install it, but all my MAGIC is doing now, is turn on - show the picture i have set as background - and after 2 to 5 sek. a little "screen" pops up and it says =
SORRY, The process android.process acore has stopped unexpectedly. Please try again
How can i get my MAGIC to work again ? With MAGIC ROM or HERO ROM (Thats not important)
I can´t get into the menu, so i can´t switch on/off anything.
Hope oyu can help me

your flashing a bad ROM
turn your phone off and reboot into recovery
wipe everything... flash a real man's ROM and reboot

did you remember to wipe before you flashed the new rom?

Hi again
No i didn´t wipe anything, i dont know how to ?
My MAGIC can´t do anything
In fastbootmode (Back + power) there are =
1.(Vol down) Hboot mode
2. (Send) Reset device (Dont know witch botton)
3. (Action) Restart to Hboot (Dont know witch botton)
4. (Menu) Power down
When i just turn the MAGIC on normally, i cant get it to do anything, but show the popup window, saying: SORRY, The process android.process acore has stopped unexpectedly. Please try again
I have tried alot with Windows Mobile, but never with Android - And iam lost

turn your phone off
turn it back on holding home button + power/end button
you should enter recovery mode

even with windows mobile they recomend u wipe after a rom install lol

Do this, it will ebter you into recovery mode, in which you can wipe esrything you need to before reflashing a new rom.
turn your phone off
turn it back on holding home button + power/end button
you should enter recovery mode
Click to expand...
Click to collapse
-------------------------------------
Sent via the XDA Tapatalk App

Moving to General

alan090 said:
even with windows mobile they recomend u wipe after a rom install lol
Click to expand...
Click to collapse
And ?
I have newer had problems with Windows mobile
But can you tell me what to do now =
Pressing HOME + POWER botton; It turns on, but keep standing on af screen with HTC MAGIC, and dos not do anything else

Binary100100 said:
Moving to General
Click to expand...
Click to collapse
Thank you

Any help will be perfect
All it can do now (That i know) is;
Turn on with errors and can´t do anything
Or
Turn on in fastboot mode (Crying smiley)

1. Hold down the HOME button (picture of a house)
2. Press and hold Power/End (red key) until you get some type of boot logo
3. Release Power/End but keep holding HOME
4. Hold HOME until you boot in to Recovery
If you get no Recovery, then you have no custom Recovery installed and you will need to look in to installing one. If you do get in to Recovery, let us know what version it is.

tbrummell said:
1. Hold down the HOME button (picture of a house)
2. Press and hold Power/End (red key) until you get some type of boot logo
3. Release Power/End but keep holding HOME
4. Hold HOME until you boot in to Recovery
If you get no Recovery, then you have no custom Recovery installed and you will need to look in to installing one. If you do get in to Recovery, let us know what version it is.
Click to expand...
Click to collapse
I have tried what you said (1 to 4) but all it does is show HTC MAGIC in screen.
I have tried to hold both bottons down up to 2 min. - Nothing happaens.
But how do i install anything when the MAGIC can´t do anything
I have tried to install RUU_Sapphire_HTC_Europe_305401 but computer and MAGIC won´t se eachother...... Tell me to check USB connection, but drivers are install and i can se the MAGICs SDcart on my computer.
Iam am SO confused

Sounds like you have attempted to install an official ROM on a previously rooted device. That means you would have lost the custom recovery that was on there.
Boot back to FastBoot and tell us what Radio and SPL you have....

tbrummell said:
Sounds like you have attempted to install an official ROM on a previously rooted device. That means you would have lost the custom recovery that was on there.
Boot back to FastBoot and tell us what Radio and SPL you have....
Click to expand...
Click to collapse
In screen it says;
SAPPHIRE PVT 32A ENG S-OFF H
H-BOOT-1.33.2005 (SAPP10000)
CPLD-12
RADIO-3.22.20.17

OK, you are going to have to use ADB. Do you know how to use it? Do you have it installed? Google "Android SDK" to find it and install it.
Once you have adb installed, conenct your phone and boot in to Fastboot (hold Back and press Power), once in Fastboot plug in your USB cable, your screen should say "FASTBOOT USB". In a command prompt on your pc, from the fast boot directory (typically c:/Android/Tools) type "adb devices", it should return your device id. If it does, you are good to go to follow the instructions at http://forum.xda-developers.com/showthread.php?t=605239
From the "Downgrade (Revert back to) 32A 3.22 Radio and SPL" section.
You are very close to having a brick where you currently are, so tread lightly friend. Verify these directions I have given you, but that is the route I would take if I were in your shoes.

Read this as well...
http://wiki.cyanogenmod.com/index.p...agic32A_Firmware_to_CyanogenMod#3.22.x_Radios

Thank you - i will try.
Now i have another problem to look at
Can´t install Android-SDK - maybe its my Win7 there is the problem
Screenshot =
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I have it installed on Win7. Do what the screenshot says, force https:. Are you behind any type of firewall?

tbrummell said:
I have it installed on Win7. Do what the screenshot says, force https:. Are you behind any type of firewall?
Click to expand...
Click to collapse
Tried to shutdown firewall.
Disconnected my router.
Cant force HTTPS:
Dont now enough to do it.
tbrummell - 1000 Thanks for your help, but it is almost better to buy a new MAGIC when iam so stupid that i cant force the HTTPS

Trouble / Brick? like this how to fix?

Hello, I got trouble like this when I tried to restore to factory setting, I never do something modding like rooting or something at my tatto.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Help me plz .... I'm confused ...

That ain't no brick. You're in the recovery console. You have to hit a buton combination to get out of it.
Press one of the volume keys together with the power on button (red phone). I think it was those. Could be another combo though.

Still not working sir I used vol down + power not happend anything, when vol up + power my tattoo start blank screen and green led indicator only ...

Hy!
I can (very cheap) buy a HTC Tattoo which is broken.
The problem is (seller says) : When he try to turn on HTC Tattoo its just vibrating.
Can anyone say me is it hardware or software problem?
(Sorry for my bad english I am from Croatia.)

Hi, the easiest option is to remove the battery n replace it, then turn the phone on. The other option is to keep pressing the buttons home and call end, together.
Mithun.

mstaglicic said:
Hy!
I can (very cheap) buy a HTC Tattoo which is broken.
The problem is (seller says) : When he try to turn on HTC Tattoo its just vibrating.
Can anyone say me is it hardware or software problem?
(Sorry for my bad english I am from Croatia.)
Click to expand...
Click to collapse
Hi, is the display working? Well, there might be many defects in the phone or might not be... its like a gamble, you can buy the phone and get it repaired, it might cost you a lot. The call is yours.

mewmewmew said:
Still not working sir I used vol down + power not happend anything, when vol up + power my tattoo start blank screen and green led indicator only ...
Click to expand...
Click to collapse
Hi, the easiest option is to remove the battery n replace it, then turn the phone on. The other option is to keep pressing the buttons home and call end, together.
Mithun.

Mithun_srk05 said:
Hi, is the display working? Well, there might be many defects in the phone or might not be... its like a gamble, you can buy the phone and get it repaired, it might cost you a lot. The call is yours.
Click to expand...
Click to collapse
I'dont know is display working.
But it seems to me like a software problem.
Is there a hard reset or turning Tattoo in DFU mode (something like that) for flashing?
Thank you for answering.

help...
help... mine is like that too.. now i can't make goldcard:
F:\tatoo\tools>adb shell cat /sys/class/mmc_host/mmc1/mmc1:*/cid
adb server is out of date. killing...
* daemon started successfully *
error: device not found
when i try to run RUU_Click_HTC_WWE_1.67.405.6_WWE_release_signed_NoDriver.exe
i get ERROR [170]: USB CONNECTION ERROR
I've downloaded (recovery-RA-tattoo-v1.6.2.img) but i don't know how to flash it...

If you cant get your adbd on the phone working, you could try to go over jtag to get a shell. But first download the android sdk from google and try the adb in there.

little development....
I managed to get these options(see attachment) pressing HOME+END after boot, but i can't select any options...
I tried to press every button and i can't enable the selection or move up/down the selection...
Some help here please...

mstaglicic said:
I'dont know is display working.
But it seems to me like a software problem.
Is there a hard reset or turning Tattoo in DFU mode (something like that) for flashing?
Thank you for answering.
Click to expand...
Click to collapse
Sorry for the late response, you can go to the boot screen by pressing the home button and end button together... This method will only work if the phone is rooted. Else, create a Gold card and get into the fast boot mode by pressing vol down and end button simultaneously lemme know if it worked.

madaleno said:
I managed to get these options(see attachment) pressing HOME+END after boot, but i can't select any options...
I tried to press every button and i can't enable the selection or move up/down the selection...
Some help here please...
Click to expand...
Click to collapse
Madaleno, looking at the attachment it shows that your phone is not rooted, which means that you cant apply update via SD card.. it will give u an error message. Create a gold card by grabbing a smart phone from someone, it can be windows mobile or android based.... Once a gold card is created, you can flash a stock ROM. To navigate on the menu, based on ur attachment, use volume up and down keys and call button to select.

If it is not rooted maybe you still have warranty for the phone so you can send it to free service.

Well... no warranty...
And volume up/down does nothing...

madaleno said:
Well... no warranty...
And volume up/down does nothing...
Click to expand...
Click to collapse
You don't need your tattoo to make a gold card.
Ask someone with a Android device, and put you sd card and do it.
Cheers

Got GOLD!
I've used a symbian to read CID and created a goldcard
Can someone give me some guidelines what to do next?

With your phone turned off, press power + volume down buttons at the same time.
Then wait a litle and press back until appears "FASTBOOT" in the screen.
Then connect the usb cable and flash the stock ROM.
Cheers

Zecanilis said:
With your phone turned off, press power + volume down buttons at the same time.
Then wait a litle and press back until appears "FASTBOOT" in the screen.
Then connect the usb cable and flash the stock ROM.
Cheers
Click to expand...
Click to collapse
I pressed "Volume down"+"End" for 1 second and then keep "back" pressed and i get the same screen as post #1 :

You don't keep back pressed.
only press it a few times.

htc dz just reboot,cant in the recovery mode

please help me
i don't know what is hapend, my htc dz just reboot int htc start wait light and reboot, i have tried in the recovery mode , but i cant get it, so i have with android flasher to flash clock word no chance, i became so a problem that something fail, what i can is just in the fast boot and hboot mode and the info but recovery and fabrikreset no chance, , thanx alot for your help
the device is rooted and s-off
tried flashing another ROM 04/08/11]LeeDrOiD_HD PORT 1.0 w
please help me
i need to know if the device is broken is there a hopfule

Remove wrong section and dub post

kitila said:
Remove wrong section and dub post
Click to expand...
Click to collapse
but please help me az first bevor you remove it,thanx

goliano said:
but please help me az first bevor you remove it,thanx
Click to expand...
Click to collapse
To help to to apply clockwork throught update.zip in recovery that might work

kitila said:
To help to to apply clockwork throught update.zip in recovery that might work
Click to expand...
Click to collapse
thank you for your replay, but where i found something like what you say to clean this problem exactly, please do not forget that i can not in the recovery mode, so you main from the HBOOT mode or somthing else.

have you tried using fastboot commands in the computers command prompt to install and reboot to recovery?

jaydog69 said:
have you tried using fastboot commands in the computers command prompt to install and reboot to recovery?
Click to expand...
Click to collapse
honstly no how i can do it pleas tell me. thanx

goliano said:
thank you for your replay, but where i found something like what you say to clean this problem exactly, please do not forget that i can not in the recovery mode, so you main from the HBOOT mode or somthing else.
Click to expand...
Click to collapse
First try turnoff phone hold volume down and power.then slect recovery once at red triangle press vol up and power try to get to recovery that way

kitila said:
First try turnoff phone hold volume down and power.then slect recovery once at red triangle press vol up and power try to get to recovery that way
Click to expand...
Click to collapse
when i put it on recovery and press tvol up and power he going ti reboot into htc start display and replay reboot
now battrie is to end and i cannot charge it i try another trich to charg it, and still read what you write

Nono let me explain I can see u speak little english
Step 1 turn off phone
2 hold vol down and power to bring to screen it will say fastboot recovery and two other things use vol down to get on recovery and hit power...that. brings u to screen with red trinangle with ! In middle
3 press vol up and power at same time"might take few trys" but will bring up blue words.
4 pick secd choice down and try and see if that takes you to clockwork

kitila said:
Nono let me explain I can see u speak little english
Step 1 turn off phone
2 hold vol down and power to bring to screen it will say fastboot recovery and two other things use vol down to get on recovery and hit power...that. brings u to screen with red trinangle with ! In middle
3 press vol up and power at same time"might take few trys" but will bring up blue words.
4 pick secd choice down and try and see if that takes you to clockwork
Click to expand...
Click to collapse
no chance when i go to fastboot recovery... and when i go on recovery and then power thehe go reboot and replay reboot without stoping i have tried the
Launch Command Prompt and type the following command:
fastboot flash recovery c:\recovery.img i have put it on c: i became this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I think I see a problem.
Hi.
Saw your post and couldn't help but notice that it is indeed in the wrong section.
My question to you is 1. What were you doing before previously encountering this problem?
and 2. What version of Clockworks Recovery were you trying to place on the phone?

mystikal87 said:
Hi.
Saw your post and couldn't help but notice that it is indeed in the wrong section.
My question to you is 1. What were you doing before previously encountering this problem?
and 2. What version of Clockworks Recovery were you trying to place on the phone?
Click to expand...
Click to collapse
i have install the last ROM that name i am write in the first seid after that i have kernel UNITY_V4_2.6.35.13_OC1708_UV900_SLQB_CIFS_TUN_VR_EXT4_2WCR
from recovery mode as zip installed, than i have problem after this problem i have make a restore to nanonid old backup und another time the new ROM and than i have this big problem that is alle story, witch clockword i tried install now is this one recovery_CWM_2.5.0.7, thank you

goliano said:
i have install the last ROM that name i am write in the first seid after that i have kernel UNITY_V4_2.6.35.13_OC1708_UV900_SLQB_CIFS_TUN_VR_EXT4_2WCR
from recovery mode as zip installed, than i have problem after this problem i have make a restore to nanonid old backup und another time the new ROM and than i have this big problem that is alle story, witch clockword i tried install now is this one recovery_CWM_2.5.0.7, thank you
Click to expand...
Click to collapse
Where are you getting the recovery from? The one you should be flashing is recovery-clockwork-3.0.2.4-vision.img

cjward23 said:
Where are you getting the recovery from? The one you should be flashing is recovery-clockwork-3.0.2.4-vision.img
Click to expand...
Click to collapse
i have looked bei google about how i can install recovery img from pc command and he say that is the best recovery, thank you for helping me

goliano said:
i have looked bei google about how i can install recovery img from pc command and he say that is the best recovery, thank you for helping me
Click to expand...
Click to collapse
Its an old recovery which will not work with gingerbread roms. Download the correct one from here.
Rename to recovery.img and place in your platform-tools folder.
Put you phone in to bootloader and select fastboot.
Connect phone to PC, open a cmd prompt and navigate to your platform tools folder.
In cmd line type
Code:
fastboot flash recovery recovery.img
Once recovery.img has finished flashing select recovery using the volume down and power button on the phone

cjward23 said:
Its an old recovery which will not work with gingerbread roms. Download the correct one from here.
Rename to recovery.img and place in your platform-tools folder.
Put you phone in to bootloader and select fastboot.
Connect phone to PC, open a cmd prompt and navigate to your platform tools folder.
In cmd line type
Code:
fastboot flash recovery recovery.img
Once recovery.img has finished flashing select recovery using the volume down and power button on the phone
Click to expand...
Click to collapse
my battery is to end i try to charge it, so i will make waht you have writing and will give you replay, i love your Roms very match and why i am going to lee-droid is the support to another language like Asia language, thanx alot man

goliano said:
my battery is to end i try to charge it, so i will make waht you have writing and will give you replay, i love your Roms very match and why i am going to lee-droid is the support to another language like Asia language, thanx alot man
Click to expand...
Click to collapse
i became the same like foto 1 so i dont now what i can do more i have tried two way first yours and than with adb but no chance, please help

When you are in the bootloader what do the top 2 lines of text say?

Thanks CJWard
Thanx for assisting. Seems like you beat me to it. I figured that the recovery img mist have been some old version cuz I had similar problems and then realized some fine lines in reading the roms post.
EDIT: Sounds like he may still have S-ON or the SD Card may have one of the PCENG10.zip or so files (cant remember the proper filename but I hope you get what i mean >,< )

i9000 Can't get into HBOOT

So my friend rooted and flashed CWM on his Galaxy S i9000, then he wasnt happy so he tried to restore the old backup. It gave him an error, now the phone is stuck in bootloop. The problem is that he cant get back into HBOOT either because Power+Vol UP+Home doesnt work. Any ideas guys?
Thanks for helping

chargerbandit said:
So my friend rooted and flashed CWM on his Galaxy S i9000, then he wasnt happy so he tried to restore the old backup. It gave him an error, now the phone is stuck in bootloop. The problem is that he cant get back into HBOOT either because Power+Vol UP+Home doesnt work. Any ideas guys?
Thanks for helping
Click to expand...
Click to collapse
Do a battery pull first
try a different combination of keys ( Vol down+home+power or home+power )
Failing which use easy reboot recovery http://forum.xda-developers.com/showthread.php?t=1796807

xsenman said:
Do a battery pull first
try a different combination of keys ( Vol down+home+power or home+power )
Failing which use easy reboot recovery http://forum.xda-developers.com/showthread.php?t=1796807
Click to expand...
Click to collapse
Thanks for your help. All those combos don't work for some reason. I am not sure how Easy Reboot Recovery would work since I believe the phone doesn't get recognized by the USB.

chargerbandit said:
Thanks for your help. All those combos don't work for some reason. I am not sure how Easy Reboot Recovery would work since I believe the phone doesn't get recognized by the USB.
Click to expand...
Click to collapse
ok, try battery pull and reinsert method for download mode
1) Press and hold (volume down+home key+power button)
2) insert the battery

by ruaylau
Did you ever get into to Download Mode or Recovery Mode before you stuck?

Yeah, I accessed the recovery with Vol Up + Power + Home, but only when the phone was booted up fully. He was trying to restore the old ROM in CWM but it gave him error flashing boot image, then he restarted the phone and got the bootloop problem, so theres no way to restart it into HBOOT. I will try your method xsenman, have to wait till sunday so the phone gets here. If anyone has some other tips, I would appreciate it.

chargerbandit said:
Yeah, I accessed the recovery with Vol Up + Power + Home, but only when the phone was booted up fully. He was trying to restore the old ROM in CWM but it gave him error flashing boot image, then he restarted the phone and got the bootloop problem, so theres no way to restart it into HBOOT. I will try your method xsenman, have to wait till sunday so the phone gets here. If anyone has some other tips, I would appreciate it.
Click to expand...
Click to collapse
May be you bricked your phone. You can try solutions mentioned below:
http://forum.xda-developers.com/showthread.php?t=1134975

USB-jig FTW
It's not bricked..if you're seeing anything on the screen, it should be recoverable. And even hard bricked phone can be saved with the UnBrickablemod.
Sent from my GT-I9000 using Tapatalk 2

Okay heres the thing. Easy Reboot Recovery does nothing, just opens and closes, I guess since it kinda doesn't recognize the USB from the phone. Then I used SGS Rescue Kit, launched OneClick.jar, connected the phone, clicked unsoft brick and it said Sucessful, the phone started showing the Samsung logo, but then nothing happens. Tried Easy Reboot Recovery again, but nothing. Any ideas?

Can you still access download mod ( Volume Key down + Menu + Power ) ?
If yes you can download a stock ROM that includes PIT PDA PHONE CSC and BOOTLOADER files, this page contains links to all theses files :
http://www.androidgen.fr/tutoriel-s...id-gingerbread-2-3-6-odin-article-2110-2.html
Now once you download these files just start Odin and put:
s1_odin_20100512.pit in PIT
CODE_I9000XWJVZ_CL762604_REV03_user_low_ship.tar.md5 in PDA
MODEM_I9000XXJVT_REV_00_CL1064602.tar.md5 in MODEM
GT-I9000-CSC-HOME-MULTI-OXAJVT.tar.md5 in CSC
APBOOT_I9000XWJVZ_CL762604_REV03_user_low_ship.tar.md5 in BOOTLOADER
Make sure that "Re-Partition" is checked as shown in this Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now hit start and wait for the magic to happen
Good luck

Did that, and it worked. Thank you very much!

great forum with lot of fantastic help.:good:

chargerbandit said:
Did that, and it worked. Thank you very much!
Click to expand...
Click to collapse
You can always hit thanx

[Samsung S5 klte] Problem, button.

Hello everyone.
I have a small problem, before long I had a new ROM, so I decided to change it to the original through odin.
But I was without the power button, it was broken. After the installation got stuck in the Samsung loop, is it possible to solve without the button? I need to get into recovery mode.
:good::good:

well, you can try to pull the battery and hold the vol and home button while putting the battery back in. the power button isnt really needed to get it into recovery or download other than making it start the sequence

youdoofus said:
well, you can try to pull the battery and hold the vol and home button while putting the battery back in. the power button isnt really needed to get it into recovery or download other than making it start the sequence
Click to expand...
Click to collapse
Oh yes! Thanks, but i can't because the ''power'' button is the ''OK'' to reset... afff.
The perfect is home button send the ''ok''. lol
Can you change the sequence of buttons?

dannymachado said:
Oh yes! Thanks, but i can't because the ''power'' button is the ''OK'' to reset... afff.
The perfect is home button send the ''ok''. lol
Can you change the sequence of buttons?
Click to expand...
Click to collapse
no. but you should be able to ADB into it in download mode or recovery and tell it what to do from there with a computer

youdoofus said:
no. but you should be able to ADB into it in download mode or recovery and tell it what to do from there with a computer
Click to expand...
Click to collapse
I apologize
I did not realize what I meant.
Adb is not enabled. I changed the ROM to the original.
I can get into recovery mode, I just can not continue because the power button is broken. And I can not clear the cache.

dannymachado said:
I apologize
I did not realize what I meant.
Adb is not enabled. I changed the ROM to the original.
I can get into recovery mode, I just can not continue because the power button is broken. And I can not clear the cache.
Click to expand...
Click to collapse
no need to apologize man!! can you try a touch recovery like philz or twrp?

youdoofus said:
no need to apologize man!! can you try a touch recovery like philz or twrp?
Click to expand...
Click to collapse
Yes, I can move normal in the recovery menu.
I just can not apply because I do not have a power button.
'' User volume up / down and power '' And i miss my power button.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
image from google

dannymachado said:
Yes, I can move normal in the recovery menu.
I just can not apply because I do not have a power button.
'' User volume up / down and power '' And i miss my power button.
image from google
Click to expand...
Click to collapse
Sorry for double post.
I have the twrp now, everthing ok. But when i clear the data, cache, dalvik and restart still on loop samsung.

dannymachado said:
Yes, I can move normal in the recovery menu.
I just can not apply because I do not have a power button.
'' User volume up / down and power '' And i miss my power button.
image from google
Click to expand...
Click to collapse
but if you installed a touch recovery, youd be fine

dannymachado said:
Sorry for double post.
I have the twrp now, everthing ok. But when i clear the data, cache, dalvik and restart still on loop samsung.
Click to expand...
Click to collapse
wipe system also, then within twrp reboot into recovery to make sure nothing remains in memory then within twrp reboot into dl mode and reflash fw via odin

vincom said:
wipe system also, then within twrp reboot into recovery to make sure nothing remains in memory then within twrp reboot into dl mode and reflash fw via odin
Click to expand...
Click to collapse
Hello. Its solved now. Thanks.

youdoofus said:
but if you installed a touch recovery, youd be fine
Click to expand...
Click to collapse
Thanks, youdoofus. Its solved now.