Okay here is my situation. I have a Bell Canda S8500M phone that I flashed with S8500XXKF2_Full_SHP_sYCO firmware but now lost my UMTS 850/1900 bands so no more 3g signal =( I only get edge. I looked all over the web and can not find the S8500M bell canada firmware anywhere!! I found the Latin America firmware S8500L S8500LUHJL1 that i flashed and got my 3G back but Kies wont let me log on to Canada Samsung appstore anymore.
1)Is there a way to flash my phone with a European firmware while maintaining my UMTS 850/1900 bands from my now S8500L?
2) Does anyone have the original Canada s8500M firmwares??
3) Can I flash part of another Euro S8500XX firmware but keep my 3G bands?
4) devs can you implement a North South America 3G friendly hybrid firmware?
Any help or suggestions will be highly appreciated.
1)you can use the European firmware and get 3G signal too by flashing the whole European firmware except amss.bin (contains modem config) use the one from S8500LUHJL1
2) Don't know where to find those
3) if you mean by the bands 3G then it is same question as 1 with same answer
4) i am not a developer so i don't know if they can
Best Regards
Thanks for your response I will give it a shot and see if it works to flash the Euro firmware without the amss.bin.
mylove90 said:
1)you can use the European firmware and get 3G signal too by flashing the whole European firmware except amss.bin (contains modem config) use the one from S8500LUHJL1
2) Don't know where to find those
3) if you mean by the bands 3G then it is same question as 1 with same answer
4) i am not a developer so i don't know if they can
Best Regards
Click to expand...
Click to collapse
I flashed the modified S8500DDJI2 on my phone without the amss.bin file and it worked! I still have my 3G connection and hacked firmware!! =) thanks a million!
Has anyone had success doing the above (keeping the amss.bin file to retain phone's frequency band) while flashing with a Bada 1.2 firmware?
I too want to keep my phone (8500T) 850/900/1900/2100 compatibility.
I have tried flashing S8500XXJID (Euro 1.2) while maintaining my S8500L amss.bin on my Canada Bell S8500M and no luck. No go on the 3G on 1.2 BADA for 8500mhz/1900mhz devices. Maybe a DEV can help implement this in a Hybrid 1.2 firmware with those bands supported.
is there any custom 4.2.2 ROM which have LTE working?
saw few posts about stock and LTE working on some radio versions, but nothing about custom roms;
10x
no one knows?
no ROM with LTE support? :crying:
850RPM said:
no one knows?
no ROM with LTE support? :crying:
Click to expand...
Click to collapse
So very few people can actually get it that its not worth devoting a whole ROM to it. The Nexus 4 can only get LTE on band 4 AWS and this exploit was fixed in radio version .48 by Google. If you live in an area covered by AWS LTE, which are few and far between right now, then there are a number of threads on how to activate it.
It's not the ROM that needs changing, just make sure you're on an older bootloader/radio and you'll get LTE if your network supports it - stock or custom
unfortunately I updated the OTA, and the LTE support is broken now
for that I was thinking maybe some smart guys figured out something
850RPM said:
unfortunately I updated the OTA, and the LTE support is broken now
for that I was thinking maybe some smart guys figured out something
Click to expand...
Click to collapse
Manually flash the older bootloader/radio from the 4.2.1 system image
here is the thread on fixing LTE after the 4.2.2 update
http://forum.xda-developers.com/showthread.php?t=2147299
Recently with the delay on 5.0 for the US LTE variant, because of AT&T, I have lost my patience with them. I am looking for a way to rid myself of this BS while maintaining full stock software. I have heard that the variants of the tablet are actually not different, and the firmwares may work on either model. Has anyone tried this? I'm well aware the cell bands supported may change (but my carrier only requires one band, and the WW variant supports one of my carrier's bands). I would love to know if it works, and if I can dirty flash the package to keep my data, since the rom is basically identical.
I flashed OTA posted in general forum for LTE and using it in ATT. Unlocked bootloader, CWM, and root afterwards. I'm not quite sure what you're looking for?
Sent from my SHIELD Tablet using XDA Premium HD app
http://forum.xda-developers.com/showthread.php?t=2945023
shannoncole05 said:
I flashed OTA posted in general forum for LTE and using it in ATT. Unlocked bootloader, CWM, and root afterwards. I'm not quite sure what you're looking for?
Sent from my SHIELD Tablet using XDA Premium HD app
Click to expand...
Click to collapse
Bricks.
No what i'm asking is if i could convert my device to the WW variant with a firmware flash, and thus avoid needing to manually flash OTA files becauze of delays. I know this isn't going to be the last update delayed on the US variant so i'm wondering if i can just switch the installed software from the US LTE version to the WW LTE version, without bricking.
Yeah.. I am thinking the same thing as well.
If it was possible without bricking the device, I would love to flash the "Rest of the World" firmware on the AT&T set too.
xonix240719mu said:
Yeah.. I am thinking the same thing as well.
If it was possible without bricking the device, I would love to flash the "Rest of the World" firmware on the AT&T set too.
Click to expand...
Click to collapse
You're welcome to try it with the factory images. If it does brick, you can always restore through the same process. I plan on attempting it soon, but i am waiting on a microsd card.
Nintonito said:
Recently with the delay on 5.0 for the US LTE variant, because of AT&T, I have lost my patience with them. I am looking for a way to rid myself of this BS while maintaining full stock software. I have heard that the variants of the tablet are actually not different, and the firmwares may work on either model. Has anyone tried this? I'm well aware the cell bands supported may change (but my carrier only requires one band, and the WW variant supports one of my carrier's bands). I would love to know if it works, and if I can dirty flash the package to keep my data, since the rom is basically identical.
Click to expand...
Click to collapse
Theoretically, the only thing that would be changed between builds is the GSM stack. However the OTA between the WW and the US version would not work by default. You'd need to go into the OTA zip and mess around with some of the build.prop info. Which then may cause MD5 mismatches when it is parsed, and would definitely affect subsequent OTA updates because of MD5 mismatches.
If there are Android 5.0 factory images available for the WW ROM you feel would be suitable for your geography, then this would be the safer way to proceed.
I remember when I owned a Samsung Galaxy S2, there was an XDA thread with flashable modems you could push to your device to get better reception in your area. Essentially the differences between the WW and US/CAN versions should only be the GSM stack, and perhaps some carrier-specific bundled app (like the AT&T app for example).
Just a quick update for those who are interested:
Well ... I just did it. Successfully flashed the RoW recovery image on the Shield Tablet LTE set which I purchased from US via Ebay. I'm still in the process of restoring but so far everything seems to be working fine.
Confirmed 2 things during the flashing of recovery image,
Quote:
1) Issues of Cellular/Sim Card on the US LTE set is almost certainly Lollipop firmware related. No problems on FW 4.4.2
2) Problem of Wi-Fi authentication error after sharing files via Super Beam ( Wi-Fi direct ) is also resolved after revert to 4.4.2
I think I will be sticking with 4.4.2 for now with the added bonus of file managers working on Kit Kat.
xonix240719mu said:
Just a quick update for those who are interested:
Well ... I just did it. Successfully flashed the RoW recovery image on the Shield Tablet LTE set which I purchased from US via Ebay. I'm still in the process of restoring but so far everything seems to be working fine.
Confirmed 2 things during the flashing of recovery image,
Quote:
1) Issues of Cellular/Sim Card on the US LTE set is almost certainly Lollipop firmware related. No problems on FW 4.4.2
2) Problem of Wi-Fi authentication error after sharing files via Super Beam ( Wi-Fi direct ) is also resolved after revert to 4.4.2
I think I will be sticking with 4.4.2 for now with the added bonus of file managers working on Kit Kat.
Click to expand...
Click to collapse
Thanks for the update. I am interested in this also.
So i'm assuming from your post you got LTE working? Which country are you in? Where do you get the factory images from?
I live in Australia and have the US LTE version. HSPA+ is good but it would be nice to have LTE working on my network (Telstra).
perky nerky said:
Thanks for the update. I am interested in this also.
So i'm assuming from your post you got LTE working? Which country are you in? Where do you get the factory images from?
I live in Australia and have the US LTE version. HSPA+ is good but it would be nice to have LTE working on my network (Telstra).
Click to expand...
Click to collapse
Actually, I don't have a 4G LTE micro sim card with me so I can't verify that at the moment. I am trying to test it out using my friend's sim card and will report back with the results. In my opinion, it's not a good idea to be trying my nano sim on this.
I'm from Singapore and the network I'm on supports LTE Band 3 & 7 and my AT&T Moto X which supports Band 7 works out of the box.
Got them from Nvidia developers website but you have to register for a free account first.
xonix240719mu said:
Actually, I don't have a 4G LTE micro sim card with me so I can't verify that at the moment. I am trying to test it out using my friend's sim card and will report back with the results. In my opinion, it's not a good idea to be trying my nano sim on this.
I'm from Singapore and the network I'm on supports LTE Band 3 & 7 and my AT&T Moto X which supports Band 7 works out of the box.
Got them from Nvidia developers website but you have to register for a free account first.
Click to expand...
Click to collapse
Yep I need LTE band 3 for my network which is not supported out of the box by my US LTE shield. If your network supports LTE Band 7 then your shield should also be able to access your LTE network as BOTH the US and RoW LTE shields support LTE Band 7.
So I don't think your experiment will help me. Is there any way finding out which LTE Bands your shield supports now that you have flashed the RoW recovery image?
perky nerky said:
Yep I need LTE band 3 for my network which is not supported out of the box by my US LTE shield. If your network supports LTE Band 7 then your shield should also be able to access your LTE network as BOTH the US and RoW LTE shields support LTE Band 7.
So I don't think your experiment will help me. Is there any way finding out which LTE Bands your shield supports now that you have flashed the RoW recovery image?
Click to expand...
Click to collapse
I am not really an expert on such matters but let me try and if it's possible to find out the information you are looking for.
Why not try flashing it and give it a go ? There's the bonus perk of removing the AT&T app from the device.
xonix240719mu said:
I am not really an expert on such matters but let me try and if it's possible to find out the information you are looking for.
Why not try flashing it and give it a go ? There's the bonus perk of removing the AT&T app from the device.
Click to expand...
Click to collapse
Hi, I am currently using US LTE NVIDIA Shield Tablet in Singapore as well. I have successfully flashed the RoW recovery image to my tablet (since I'm downgrading from Lollipop as well, so I thought I might as well try), but I noticed that there is no baseband file in the recovery image package. I proceeded to flash anyway.
One thing I noticed after flashing is that I still am not getting LTE (half of Singapore is band 3, and my home is under its coverage). So, it's pretty safe to say that the baseband is not affected by the factory image.
However, it might also be that the latest recovery image doesn't cover the baseband, and it might be included in the previous updates. So, I'm trying to download the previous recovery images and see whether there are baseband images are there.
EDIT: baseband image is not in there. The baseband version is definitely still for North America (e1729-nala.4.05_0.6.3 @786934, notice the 'na' part?).
inscythe said:
Hi, I am currently using US LTE NVIDIA Shield Tablet in Singapore as well. I have successfully flashed the RoW recovery image to my tablet (since I'm downgrading from Lollipop as well, so I thought I might as well try), but I noticed that there is no baseband file in the recovery image package. I proceeded to flash anyway.
One thing I noticed after flashing is that I still am not getting LTE (half of Singapore is band 3, and my home is under its coverage). So, it's pretty safe to say that the baseband is not affected by the factory image.
However, it might also be that the latest recovery image doesn't cover the baseband, and it might be included in the previous updates. So, I'm trying to download the previous recovery images and see whether there are baseband images are there.
EDIT: baseband image is not in there. The baseband version is definitely still for North America (e1729-nala.4.05_0.6.3 @786934, notice the 'na' part?).
Click to expand...
Click to collapse
Sorry I don't really understand ... the RoW software cover for both Band 3 and 7 since the UK edition supports these LTE bands as specified in Nvidia FAQ.
You should still be able to get Band 7 coverage which the NA edition supports as well, right ?
Am I missing something ?
inscythe said:
Hi, I am currently using US LTE NVIDIA Shield Tablet in Singapore as well. I have successfully flashed the RoW recovery image to my tablet (since I'm downgrading from Lollipop as well, so I thought I might as well try), but I noticed that there is no baseband file in the recovery image package. I proceeded to flash anyway.
One thing I noticed after flashing is that I still am not getting LTE (half of Singapore is band 3, and my home is under its coverage). So, it's pretty safe to say that the baseband is not affected by the factory image.
However, it might also be that the latest recovery image doesn't cover the baseband, and it might be included in the previous updates. So, I'm trying to download the previous recovery images and see whether there are baseband images are there.
EDIT: baseband image is not in there. The baseband version is definitely still for North America (e1729-nala.4.05_0.6.3 @786934, notice the 'na' part?).
Click to expand...
Click to collapse
Thank you. That is exactly the information I was looking for. Unfortunately there is no point flashing the RoW recovery image if you wish to change your baseband (and then use different LTE bands like I want to).
Is there anywhere I can download the RoW baseband images? I remember they were readily available for my nexus 4.
xonix240719mu said:
Sorry I don't really understand ... the RoW software cover for both Band 3 and 7 since the UK edition supports these LTE bands as specified in Nvidia FAQ.
You should still be able to get Band 7 coverage which the NA edition supports as well, right ?
Am I missing something ?
Click to expand...
Click to collapse
As I said, the image doesn't include the baseband image. So, no matter what you flash on the rom side, it won't matter.
Also, about band coverage in Singapore, it's not a full overlap. Some areas are band 3 (south and west), while some band 7 (North and East). I know this from an M1 engineer friend. So, yeah, no LTE band 3 in this factory image here.
But not all hope is lost. If one day Nvidia decides to update baseband, it will then definitely include the baseband in the OTA or factory image. So, possibility of switching is still there.
Was there a baseband update with the latest software update (2.0)?
The factory images for 2.0 have still not been released.
In another strange twist when i turned on my tablet this morning I was surprised to see my US shield had LTE here in Australia. Which means only one thing - Telstra are expanding their LTE spectrum in my area!
perky nerky said:
Was there a baseband update with the latest software update (2.0)?
The factory images for 2.0 have still not been released.
In another strange twist when i turned on my tablet this morning I was surprised to see my US shield had LTE here in Australia. Which means only one thing - Telstra are expanding their LTE spectrum in my area!
Click to expand...
Click to collapse
I downloaded the OTA manually and checked the content. It doesn't have any baseband update. Also, just to confirm again, I actually re-installed Lollipop. The baseband is still unchanged (only the suffix @ part changed, but I think it's just some marker).
I checked wikipedia, and it seems that Telstra has band 3 and 28. There's a good chance that they switched your area's band to 3, or they simply add band 7 (the latter is, of course, ideal).
I read that Nvidia is preparing an update to the existing Lollipop system. Hopefully they will include a baseband update, then we can probably make the jump to the RoW ROM. For now, I'm sticking with the US ROM first.
inscythe said:
As I said, the image doesn't include the baseband image. So, no matter what you flash on the rom side, it won't matter.
Also, about band coverage in Singapore, it's not a full overlap. Some areas are band 3 (south and west), while some band 7 (North and East). I know this from an M1 engineer friend. So, yeah, no LTE band 3 in this factory image here.
But not all hope is lost. If one day Nvidia decides to update baseband, it will then definitely include the baseband in the OTA or factory image. So, possibility of switching is still there.
Click to expand...
Click to collapse
Okay ... I see that you are not able to get Band 3 coverage. But just to confirm, you are still able to get band 7 4G LTE coverage on the ROW Rom right ?
My phone 4G LTE is on Singtel, getting pretty good coverage island wide on Band 7. Unfortunately, it's a nano sim and I'm hesitant to test it on the tablet in case in gets jammed inside the slot.
So long everything works fine, I'm sticking with ROW Rom as it will probably not have none of the nonsense whereby it require AT&T approval before release.
Sorry to trouble you on another matter, I have reported this 2 issues to Nvidia customer support but just want to check if it's just my set or an common problem.
1) Cellular data connectivity will not return after enable aeroplane mode. SIM card is subsequently not detected.
2) After sharing files using Wi-Fi direct ( SuperBeam app ), Wi-Fi connection doesn't auto reconnect due to failed authentication. Require manual intervention.
What I can say is this 2 issues no longer occur once I downgraded the software from Android 5.0 back to Kit Kat 4.4.2
---------- Post added at 01:54 PM ---------- Previous post was at 01:46 PM ----------
perky nerky said:
Was there a baseband update with the latest software update (2.0)?
The factory images for 2.0 have still not been released.
In another strange twist when i turned on my tablet this morning I was surprised to see my US shield had LTE here in Australia. Which means only one thing - Telstra are expanding their LTE spectrum in my area!
Click to expand...
Click to collapse
According to Nvidia faq, the North American version that works on AT&T, T-Mobile and Rogers on LTE bands 2, 4, 5, 7, and 17 and HSPA bands 1, 2, 4, 5.
I see that this article ( http://www.cnet.com/au/news/telstra-expands-its-4g-services-including-the-700mhz-band-trials/ ) states that Telstra is conducting trials for 700mhz (Band 17) in your area. Maybe this is why you have begun receiving 4G LTE reception in your area ?
xonix240719mu said:
According to Nvidia faq, the North American version that works on AT&T, T-Mobile and Rogers on LTE bands 2, 4, 5, 7, and 17 and HSPA bands 1, 2, 4, 5.
I see that this article states that Telstra is conducting trials for 700mhz (Band 17) in your area. This is probably why you have begun receiving 4G LTE reception.
http://www.cnet.com/au/news/telstra-expands-its-4g-services-including-the-700mhz-band-trials/
Click to expand...
Click to collapse
I initially thought it may have been the planned 700mHz expansion by Telstra in my area HOWEVER Telstra's 700mHz expansion is actually Band 28 (not Band 17) and my US shield does not work on Band 28 out of the box. Although LTE Band 17 and 28 both use the 700mHz spectrum they both use different parts of that spectrum so are not compatible.
What I think has happened is there is some LTE Band 7 coverage in the middle of town here which is where I was when I got LTE coverage today. As I understand it Telstra has some limited LTE Band 7 coverage with most of the LTE network being Band 3........ so I'll still have to wait until I can flash a RoW baseband which will hopefully give me Band 3.....
Hi all,
I own a SM-A500M phone. The phone has unlocked stock rom (original rom is not modified by carrier) and updated trough OTA to android 5.0.2. I know 4g does work in my phone because I could use it with my prior carrier, but I recently changed to CLARO and with this new provider I don't have 4g acces, only H+ and it is really slow and laggy connection.
I know the following:
1) Sim card is a compatible 4g nano sim
2) The carrier CLARO has 4g coverage where I live
3) The phone is not the problem
4) I have tried all the usual FAQS (APN's, select LTE in config, reboot) with no success.
5) The phone's variant is right (latinoamerican brand), so It can't be due to frequencies or bands problems.
I asked for help in CLARO and told me that this has happened amongst users with unlocked phones (that is, rom not modified with CLARO's bloatware), and the solution is to flash CLARO's rom. But the problem with this solution is that CLARO hasn't released android 5.0.2 update (and I think it will never update) and I really like android 5 and wouldn't want to return to 4.4.
So, is it true? Is there a chance to fix this problem with minor tweaks? What is the problem here?
Since I recently acquired this phone, I would prefer not lossing warranty, so rooting and custom roms might not be an option.
Thanks in advance. Kind regards!
You could try to flash their rom and check if it works. Then you can be 100% sure that hardware/chip/network provider are fine. I have the same phone on since last week, but still did not go to get the chip at a movistar office. Maybe you need to activate the chip and they refuse to do it unless you get their rom. Maybe just getting their rom, and then flashing back the updated stock one or a CM or whatev would be enough.