Looking to buy a broken G2 - G2 and Desire Z General

Well I was trying to tighten the hinges on my G2, and because of a stupid mistake a tore the ribbon cable connecting the keyboard to the motherboard... I'm looking to buy a broke G2 so I could install that keyboard on my phone. Or even if someone knows where to buy the keyboard itself? Thank you.

Check ebay, I get all sorts of parts from there. Hong Kong ftw

I have a broken Desire Z... I'm not sure if the parts are swappable?. The phone wont boot, pretty sure the emmc chip was fried. But other then that everything is basically like new, barely got to use the thing. PM me if you're interested.

check your inbox

Related

want to buy jamin motherboard

I am looking for a used jamin motherboard (a working board) if anyone has one for sell. Mine is completely dead. Maybe some one here has a jamin with a broke screen and wants to sell the motherboard. or a board with something minor wrong but that still works.
Have a look in e-bay... there's lot's of spare parts for our prophet's there... Be careful with what you buy...
Yes. I have been looking on ebay with no luck yet.

For Sale - TyTN Parts

TyTn Parts for sale----
They just happen to be assembled..
Sent my functioning HTC branded TyTn to CellularDR in Glendale, CA to have it's "D" pad repaired. Phone worked fine, just not with the "D" pad.
They have returned it, saying the parts to repair are not available. In the meantime I have replaced it with a Tilt.
I cannot speak as to whether it is still functional as a phone. Make me a reasonable offer and it's yours. Good Battery, screen, etc.
hey...are you selling seperate parts or the entire phone? if so, how much do you want for the motherboard?
he's selling the whole phone.......i asked, cause i want the front camera, and maybe the housing. if someone wants the digitizer/lcd, we could probably buy it and then break it down on our own
how much cost the hermes does it only sell the motherboard ??
bought the phone.

Replacement full casing/housing

I purchased one of these as the housing i had was getting very messy
http://cgi.ebay.ie/FULL-HOUSING-KEYBOARD-HTC-TyTN-II-2-P4550-P-KAISER-/180496072719?cmd=ViewItem&pt=PDA_Accessories&hash=item2a0667800f
DONT BUY THIS KIT !!!
The item was listed as new but clearly most of the parts were used.
The biggest problem I had was with the front face plate.
There is a few gold "connectors" that have to be melted in the plastic.
I had to break these out of my old case and used a soldering iron to put them into the new faceplate.
There was also the gold screw holes! these were a real pain.
Again they needed to be broken from the old case and then gently heated with the iron until they melted into their respective hole.
Maybe this is what I should have expected but it would have been nice if they said a little fiddling was required for fitting.
The keyboard was also not as the picture is. It was a chinese keyboard so I just used my own.
All in all it worked out well and my phone looks spanking new but its not really a worthwhile mod given the cost and hastle.
I was also planning to buy that housing but had a second thought about the keyboard. my original keyboard is all black and doesnt have the white numpad.
thanx for the advice ! ill try to inquire from other seller.
how about this one?
http://cgi.ebay.ph/FULL-HOUSING-KEY...ewItem&pt=PDA_Accessories&hash=item20b0bf01ef
A few days ago I received the same housing from the same vendor and is all ok. Mounting screw is settled and the exterior is not damaged.
Before ordering I contacted him and sent a picture of my phone. When he confirmed that everything (including keyboard) is identical, I ordered. I got the body and I get happy.
I think you had bad luck
Maybe its bad luck but eBay rules are pretty straight forward.
I was not sold what was listed in the pictured and it was not new (item had marks from use where case slides apart and also scratching.)
The keyboard was not the one in the picutes. I actually have a full black KB but wanted to go with the white panelled one in the pic.
What I got was a chinese all black KB. Useless to me.
Anyway, i got my phone rebuilt and its looks new and works great. It took a little more fiddling than I would have expected and the KB was wrong.
I left Neutral feedback for the vendor because I felt I got what I needed.
codejack:
sorry to say but it is really a bad luck. lets try to be careful with items like that and inquire every detail of the item we will buy. thanks for sharing pal
pozabi:
thanks for the tip. ill try to send a picture of my unit when i buy a full housing so that everything will be clear to the seller
Manual to disassemble housing
Dear colleagues,
Can you send to me a link or a manual about it?
I need change the housing and touch screen of my TYTN II and I don´t know how I can do that.
Please, if you can, help me!
Thanks!
New housing for my hardworking MDA T - Mobile
i buy from ebay seller xellmore_au, nice and comes with tools for the works.
Just follow a video at youtube search " HTC Kaiser (TyTN II) szétszedése "
And my MDA T-Mobile now HTC TyTN II
Cool huh
leonardvr said:
Dear colleagues,
Can you send to me a link or a manual about it?
I need change the housing and touch screen of my TYTN II and I don´t know how I can do that.
Please, if you can, help me!
Thanks!
Click to expand...
Click to collapse
http://www.htcdriver.com/uploads/service/tytniikaiser.pdf
i bough the full housing with keyboard from ebay and the keyboard isn't working. not sure why

Any HD2 spares sellers out there?

Hi all,
I have to admit I have a sneaky feeling this should not be here but I'm not sure where to put it... It's not strictly a accessory but anyway, if it is wrong, please do advise.
I'm after anyone here who has or knows of a someone that sells HD2 spares?
I obtained two screen repair HD2s - both have been tampered with previously and while the units both work fine, the front keypad ribbon is broken in two so the keys are not responding.
I have managed to source 2 LCD's but without these buttons, I'm lumbered with two units and two brand new LCD units.
Appreciate any help on this!
Thanks,
Akash
akash_84 said:
Hi all,
I have to admit I have a sneaky feeling this should not be here but I'm not sure where to put it... It's not strictly a accessory but anyway, if it is wrong, please do advise.
I'm after anyone here who has or knows of a someone that sells HD2 spares?
I obtained two screen repair HD2s - both have been tampered with previously and while the units both work fine, the front keypad ribbon is broken in two so the keys are not responding.
I have managed to source 2 LCD's but without these buttons, I'm lumbered with two units and two brand new LCD units.
Appreciate any help on this!
Thanks,
Akash
Click to expand...
Click to collapse
Not sure if this is much help but I did recall seeing a guy on Craigslist in Toronto selling an HD2 in mint condition except for the fact that the glass screen looked like it took a bullet. The LCD was perfect underneath and no scratches anywhere. Not quite sure how someone can do that to it and keep in mint at the same time but anyway it was posted in April and they were asking for around $300 CAN.
Thanks for that suggestion
I have actually been looking around Ebay UK (Where I am) for faulty HD2s but no one will sell them cheaply so...
Bit the bullet and requested a return on the LCD - the seller will refund me the full value back. Just wish I could get these parts as the rest of the unit is mint and given that I've already stripped the screen off (not the easiest task!), it would have been great just to put it back together in a working state.
Thanks again and if anyone does have any other suggestions in getting hold of the keypad, I would appreciate a quick note on it

[Q] Anyone have a broken HD2?

I bought a broken HD2 on ebay about a week ago,it had a cracked digitizer,I thought it would be an easy fix,and it is,but in the process of taking it apart,I tore the cable going to the buttons. Does anyone have a broken hd2 they would be willing to sell the buttons from? I looked on ebay and there are only 4 of them all in china with expected delivery of about 32 days. I was hoping to have my phone working again in a few days,not a month. any help would be appreciated.
yeah
ill sell you my broken hd2 phone for 300
not really helpful,I only paid $187 for the one I have and all I need is the buttons,the rest of my phone is fine now.(just to make it clear,I need the board/cable for the buttons below the screen,not the plastic piece,the actual button board)

Categories

Resources