Hello,
I rooted my kindle fire last week using KFU 0.9.5. Everything was going fine until yesterday, when it decides to restart itself and try to install an update, I think it's the 6.3.1 update. It get's about 1/4 of the way through and stops, shows a white triangle with a yellow exclamation point in the middle and andy on the side, and just sits there. I've restarted it about 10 times now, and every time it gets to the home screen, it restarts and goes in the cycle again.
FYI I used the CWM recovery in the KFU, I don't know if it makes a difference.
The 6.3.1 update is causing a lot of problems with rooted devices. It may take a few days to pinpoint the problem. See if you can get into recovery, you may need to flash a different rom.
MoDaCo is a very good "stock" analog if that's what you're into.
Thanks
Thanks, I think I'll just wait a few days to see if the problem gets fixed.
At least in my experience twrp will actually unpack and install the update for you.Also if the fact that your rooted is causing the installation failure and you really want the update install ota root keeper from the market click protect root and temporarily unroot the device. If the update succeeds you will then need to go through the process of rerooting your device.f your simply just tired of what its doing download the latest stock image place it at the root of your SD card and flash it via cwm recovery under install update zip. Then reroot flash fff and the recovery of your choice then your good to go. I prefer twrp recovery plus if you want to flash ics with the new kernel you will need twrp to do this cwm doesn't work.
Thepooch said:
At least in my experience twrp will actually unpack and install the update for you also if the fact that your rooted is causing the installation failure if you really want the update install ota root keeper from the market click protect root and temporarily unroot the device and the update succeeds you will then need to go through the process of rerooting your device if your simply just tired of what its doing download the latest stock image place it at the root of your SD card and flash it via cwm recovery under install update zip then reroot flash fff and the recovery of your choice then your good to go I prefer twrp recovery plus if you want to flash ics with the new kernel you will need twrp to do this cwm doesn't work.
Click to expand...
Click to collapse
punctuation? lol!
Awhh who cares lol I sure dont THERE I PUNCTUATED PURE SYMANTICS! Lol punctuation should cost more I will add a donate button later.
I'm trying to install jelly bean on my kindle fire but using KFU I've only managed firefirefire and clockworkrecovery.
I tried rooting using KFU to root but that doesn't work. Always gets stuck with the twrp.img error saying it's the wrong image (seems to be a common problem)
I've tried getting twrp installed using adb shell but when I get to the command to load the recovery image I get error; couldn't load recovery image. I thought maybe there was a problem so I tried loading the fff bootloader even though I already had it on my kf but it also returned with error: couldn't load image.
Theoretically, if you have clockwork recovery, there is no need for TWRP. But if you must have TWRP instead, use clockwork to flash a rom (and FFF1.4 while you're at it). Boot into the rom and use the Smirkit to install TWRP. It will save you a lot of hassle.
soupmagnet said:
Theoretically, if you have clockwork recovery, there is no need for TWRP. But if you must have TWRP instead, use clockwork to flash a rom (and FFF1.4 while you're at it). Boot into the rom and use the Smirkit to install TWRP. It will save you a lot of hassle.
Click to expand...
Click to collapse
The problem is getting root access. Most of the guides I've tried to follow require twrp installed to get into recovery. Without root I can't flash another rom.
I also already have FFF 1.4.
So I reverted back to stock and went through the manual process again and I was able to get it to work. When I was initially trying to flash twrp with the command line I copied pasted the name of the file without adding the file extension. Fixed that by adding .img and everything went through. Got Jellybean on here now and it's running great.
If you are installing a custom rom (including MoDaCo), there is no need to go through the "rooting" process, hence saving you "a lot of hassle". Recoveries, like CWM and TWRP provide temporary root access.
soupmagnet said:
If you are installing a custom rom (including MoDaCo), there is no need to go through the "rooting" process, hence saving you "a lot of hassle". Recoveries, like CWM and TWRP provide temporary root access.
Click to expand...
Click to collapse
This is odd because I tried installing the JB rom after I got CWM on there. It booted up to a black screen and left it there for 5 minutes and still black screen. I reverted back with the update bin from amazon website after that.
hxu976 said:
This is odd because I tried installing the JB rom after I got CWM on there. It booted up to a black screen and left it there for 5 minutes and still black screen. I reverted back with the update bin from amazon website after that.
Click to expand...
Click to collapse
That has nothing to do with "rooting". Most of the time it's caused by a bad download (always check MD5s) or not "wiping" correctly before installation.
(OK, the board ate my first post; maybe this one will do better...)
I am trying to root my Nexus 4 in order to install Titanium Backup. (I have some user data to transfer over from my old Samsung Vibrant before I retire it.) I'm using the Nexus Toolkit for Linux, here:
http://forum.xda-developers.com/showthread.php?t=1999065
The first two steps work fine. I can unlock the bootloader and install clockwork mod. When I try to actually root the device and install su, though, I run into a problem. Specifically, going into recovery mode (either automatic through the toolkit or manually myself) I get the Andy the Android "error" icon (Android flat on his back, chest open, with a red warning triangle over it). That remains until I reboot the device.
Any suggestions? I'm not an experienced rooter (Ti Backup is the ony reason I'm even bothering), so keep it basic please.
Crell42 said:
(OK, the board ate my first post; maybe this one will do better...)
I am trying to root my Nexus 4 in order to install Titanium Backup. (I have some user data to transfer over from my old Samsung Vibrant before I retire it.) I'm using the Nexus Toolkit for Linux, here:
http://forum.xda-developers.com/showthread.php?t=1999065
The first two steps work fine. I can unlock the bootloader and install clockwork mod. When I try to actually root the device and install su, though, I run into a problem. Specifically, going into recovery mode (either automatic through the toolkit or manually myself) I get the Andy the Android "error" icon (Android flat on his back, chest open, with a red warning triangle over it). That remains until I reboot the device.
Any suggestions? I'm not an experienced rooter (Ti Backup is the ony reason I'm even bothering), so keep it basic please.
Click to expand...
Click to collapse
It sounds like you're losing recovery. Do you restart your device after you flash CWM?
Try flashing CWM manually through fastboot, don't restart the device (will overwrite custom recovery) and just go directly into recovery then flash SU.
Alternatively, make sure you're using the right version of CWM and/or double check that the writing process for CWM is going to completion. I don't know if you can disable the stock recovery overwrite without first having root, but you can also look into that
hoponpop said:
It sounds like you're losing recovery. Do you restart your device after you flash CWM?
Try flashing CWM manually through fastboot, don't restart the device (will overwrite custom recovery) and just go directly into recovery then flash SU.
Alternatively, make sure you're using the right version of CWM and/or double check that the writing process for CWM is going to completion. I don't know if you can disable the stock recovery overwrite without first having root, but you can also look into that
Click to expand...
Click to collapse
I'm using whatever version is included in the Universal Tooklkit download. It has two versions included, Standard and Touch. I've tried both, same effect.
Any pointers on "manual" installation of CWM? (As I said, rooting newbie.)
Can i install CWM on locked bootloader?
Ben Ling said:
Can i install CWM on locked bootloader?
Click to expand...
Click to collapse
Yes.
An 'exploit' has recently become available for ROOTING the Nexus 7 without unlocking the BOOTLOADER.
This 'exploit' works... I have tested it myself.
Until recently, I believed that because FASTBOOT wasn't an option (as a result of a LOCKED BOOTLOADER), there was no way of FLASHING anything.
Happily, I was disabused of this notion by bftb0... and I can confirm, you can indeed install CWM (or TWRP) with a locked BOOTLOADER.
-----------------------------
Here's how...
First, you need to run this 'exploit' to acquire ROOT.
Upon reboot, you should now be rooted, with Chainfires SuperSU package and associated SU binary installed.
It's important that you are ROOTED before you proceed.
Next, get Android Terminal Emulator from PlayStore.
Download a CUSTOM RECOVERY .img of your choice... either CWM (Both 'Grouper' and 'Tilapia' variants are available)...
...or TWRP for 'Grouper' (N7 WiFi) or TWRP for 'Tilapia' (N7 3G).
Rename it to recovery.img... and copy it to the root of the Nexus 7's internal storage (emulated SD card).
In Terminal Emulator, run the following command...
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/platform/sdhci-tegra.3/by-name/SOS
Upon completion of this command, shutdown and reboot your device into the BOOTLOADER, and from there, boot into your CUSTOM RECOVERY... in pretty much the same way had you FASTBOOT FLASHED it.
-----------------------------
You are now free to flash whatever ROMs or kernels you like.
However, a word of caution... because the BOOTLOADER remains locked, FASTBOOT is strictly off limits; it simply won't work.
So the first thing you should do after flashing TWRP or CWM is...
*** MAKE A NANDROID BACKUP ***
If the device becomes 'wedged/bootlooped' as a result of some ROM flash gone wrong, then you will have no choice but to unlock the BOOTLOADER (with full wipe) in order to fix it.
But if you have a NANDROID backup... piece of cake... just restore.
-----------------------------
Credits and kudos must go to XDA members, nhshah7, who made this 'exploit' available and bftb0, whose post pointed me in the right direction, with regard to the 'dd' command.
-----------------------------
I can confirm all of this works... my Nexus 7 is currently rooted, running a custom recovery (TWRP), with a custom ROM and Kernel (see sig) installed - all sitting behind a LOCKED BOOTLOADER.
...no Factory Reset (wipe) required...
...and no Unlocked Padlock Symbol upon boot.
Rgrds,
Ged.
Previously I installed cwm and can boot,just 1 time.
I tried to boot into but nothing.
What to do?
Sent from my Sony Xperia™ sola using XDA Premium App
@GedBlake well it works for the first time for me as well,.,., used the TWRP latest..,.,.
afterwards it says "no command"
SSyar said:
@GedBlake well it works for the first time for me as well,.,., used the TWRP latest..,.,.
afterwards it says "no command"
Click to expand...
Click to collapse
This is really peculiar... I had a few problems myself, initially... but I just assumed I made a typo mistake in TE - but I never had a "no command" message. It took me two or three goes before I got it to work.
And it works fine now, without problems.
I recall reading, a while ago, you had to delete a file from /system called recovery-from-boot.p after flashing a custom recovery in order to get the custom recovery to stick. I never had to do this myself, maybe 'cos I'm running a custom ROM.
Are you on stock, or running a custom ROM?
Rgrds,
Ged.
GedBlake said:
This is really peculiar... I had a few problems myself, initially... but I just assumed I made a typo mistake in TE - but I never had a "no command" message. It took me two or three goes before I got it to work.
And it works fine now, without problems.
I recall reading, a while ago, you had to delete a file from /system called recovery-from-boot.p after flashing a custom recovery in order to get the custom recovery to stick. I never had to do this myself, maybe 'cos I'm running a custom ROM.
Are you on stock, or running a custom ROM?
Rgrds,
Ged.
Click to expand...
Click to collapse
I'm on stock JB 4.2.2 JDQ39 Wi-Fi & 3G version,so what to do now?
Sent from my Asus Google Nexus 7 using XDA Premium
Ben Ling said:
I'm on stock JB 4.2.2 JDQ39 Wi-Fi & 3G version,so what to do now?
Sent from my Asus Google Nexus 7 using XDA Premium
Click to expand...
Click to collapse
Have you tried running the dd command again?... As I previously mentioned, it took two or three attempts, before it 'stuck' on my N7.
Now I have no problem booting into TWRP... similarly, I have tested this procedure with CWM - and again no problems.
With a root capable file manager, you could try deleting (or renaming) the file recovery-from-boot.p which can be found in /system, and then try again.
Rgrds,
Ged.
GedBlake said:
Have you tried running the dd command again?... As I previously mentioned, it took two or three attempts, before it 'stuck' on my N7.
Now I have no problem booting into TWRP... similarly, I have tested this procedure with CWM - and again no problems.
With a root capable file manager, you could try deleting (or renaming) the file recovery-from-boot.p which can be found in /system, and then try again.
Rgrds,
Ged.
Click to expand...
Click to collapse
How to boot into cwm?press volume button?
Sent from my Google Nexus 7 using XDA Premium App
Ben Ling said:
How to boot into cwm?press volume button?
Sent from my Google Nexus 7 using XDA Premium App
Click to expand...
Click to collapse
Shut down the tablet completely.
Press and hold the VOL DOWN button... whilst holding, press the POWER button.
This will boot you into the BOOTLOADER.
Using the VOL buttons, navigate to RECOVERY.
Press the POWER button to select.
Rgrds,
Ged.
Just tested this method... again... (using dd to install a Custom Recovery)... with both CWM and TWRP... and in both instances, the installations survived a reboot. So I'm puzzled why there seems to be a problem here.
---------------------------------
I have semi-automated the process in order to avoid typing long complicated commands into Android Terminal Emulator. A process, which, by it's nature, is subject to typographical error.
Here's how...
Download the Custom Recovery of your choice to your Nexus 7.
Rename it to recovery.img
Copy it to the root of the emulated SD card (internal storage).
---------------------------------
Download this script file...
writerecovery.zip
Unzip and copy it to the root of the emulated SD card (internal storage).
(Alongside the recovery.img).
---------------------------------
Install Script Manager from Google Playstore.
Open Script Manager and locate the script file writerecovery.sh on the root of the emulated SD card.
Press ENTER on it...
Select OPEN AS... Script/Executable...
Select SU (root) from the toolbar...
Select Run...
The script will now execute the following command...
Code:
dd if=/sdcard/recovery.img of=/dev/block/platform/sdhci-tegra.3/by-name/SOS
...writing the recovery.img to the recovery partition.
See attached thumbnails for the sort of thing you should expect to see.
---------------------------------
I have tested this method several times... switching between CWM and TWRP. And performing multiple reboots, to ensure that the Custom Recovery 'stuck' in each instance.
---------------------------------
Hope this works... if it doesn't... then I'm at a loss to explain why.
Maybe somebody with more technical knowledge can assist.
All I know, is it works for me... on my Nexus 7.
Rgrds,
Ged.
well i installed recovery using goo manager ,.,. got this response from other thread and is working for me ,.,., goo manager also has the option to restart in recovery so really good for me
Help with my Condition
OK, I need help with the following Scenario with Nexus 7 2012 Wifi
My USB Port is damaged. Managed to charge batter with external wires. After that I was able to:
> Root my Nexus7 with KingRoot app (several tries does the trick)
> Install CWM (non-touch) with ROM Manager
> Boot into CWM and do a dummy Flash of Update-SuperSU.zip file just to see if it works on Locked Bootloader. It was successful.
Now I came across your thread, What I need help with is:
WILL I BE ABLE TO FLASH A CUSTOM ROM + GAPPS on a Locked Bootloader via CWM ?
This is going to be a one way ride for me, if I brick I have a paperweight.
(I have however a Backup from CWM, which I can restore if the tablet manages to boot into CWM after bricking)
Need assistance, opinions, strategy with this. Response Awaited.
junisheikh said:
OK, I need help with the following Scenario with Nexus 7 2012 Wifi
My USB Port is damaged. Managed to charge batter with external wires. After that I was able to:
> Root my Nexus7 with KingRoot app (several tries does the trick)
> Install CWM (non-touch) with ROM Manager
> Boot into CWM and do a dummy Flash of Update-SuperSU.zip file just to see if it works on Locked Bootloader. It was successful.
Now I came across your thread, What I need help with is:
WILL I BE ABLE TO FLASH A CUSTOM ROM + GAPPS on a Locked Bootloader via CWM ?
This is going to be a one way ride for me, if I brick I have a paperweight.
(I have however a Backup from CWM, which I can restore if the tablet manages to boot into CWM after bricking)
Need assistance, opinions, strategy with this. Response Awaited.
Click to expand...
Click to collapse
Hi, junisheikh...
To answer your question...
junisheikh said:
"WILL I BE ABLE TO FLASH A CUSTOM ROM + GAPPS on a Locked Bootloader via CWM ?"
Click to expand...
Click to collapse
Yes, you should be able to.
---
The bootloader lock state is irrelevant when it comes to flashing stuff via a Custom Recovery (such as CWM or TWRP).
All an unlocked bootloader does, is it allows the device to accept fastboot flash commands from a connected PC or Mac, and which is the usual way of flashing a Custom Recovery, and then subsequently rooting it.
I would, however, advise against using CWM. ClockWorkMod Recovery is old and hasn't been updated for quite some time, and may cause problems.
Instead, you should take a look at TWRP (TeamWin Recovery Project). This Custom Recovery has a better user interface, and is less likely to cause you problems.
---
Although your bootloader is locked, you have managed to acquire root via KingRoot... which means you can flash a Custom Recovery with the Flashify app...
https://play.google.com/store/apps/details?id=com.cgollner.flashify
This app allows you to flash Recoveries and Boot images (stock and custom) directly from the device itself, providing the device is rooted. The free version of Flashify has a limit of 3 flashes per day. This shouldn't be a problem though... Custom Recoveries aren't something you generally flash on a regular basis.
(See my attached screenshots for a flavour of how Flashify works.)
---
You can find the latest version of TWRP for the Nexus 7 WiFi model here...
http://techerrata.com/browse/twrp2/grouper
Download to your Nexus 7, and use the Flashify app to flash.
And then download whatever Custom ROM+GAPPS you like, and flash via TWRP.
Incidentally, the NANDROID backup you've already created with CWM is NOT compatible with TWRP. So you'll need to create a new NANDROID backup, should you choose to flash TWRP.
---
junisheikh said:
This is going to be a one way ride for me, if I brick I have a paperweight.
Click to expand...
Click to collapse
This is possible, because you don't have access to fastboot (due to your broken USB port) you won't be able to fastboot flash back to Google Factory stock should you not be able to boot Android (for whatever reason) after flashing some Custom ROM. But providing you have a NANDROID backup and a Custom Recovery (CWM or TWRP) installed, you **should** be able to recover from softbricks such as bootloops. But having said that, I would tread carefully.
Hope this helps, and good luck.
Rgrds,
Ged.
currently I'm on 2.6.0.0 and I was thinking of the benefits to upgrading to the latest version, plus also the risks involved. Whats the best way to upgrade TWRP ?
Use goomanager. It's by far the easiest since it's mostly automated.
mjb152 said:
currently I'm on 2.6.0.0 and I was thinking of the benefits to upgrading to the latest version, plus also the risks involved. Whats the best way to upgrade TWRP ?
Click to expand...
Click to collapse
I just downloaded the latest version of TWRP, booted into the bootloader and loaded the image by
Code:
fastboot flash recovery {insert name of image file here}
. Easy peasy,,,
oops, it's a bit late. I found the goomanager and installed it, trouble is I installed the OTA update which has set my device unrooted. There is no TWRP any more, not sure how to get into recovery mode as a dead android with a red triangle appears. I'm unlocked, but just cant get into recovery.
I took a full TWRP backup before I started, any tips ?
mjb152 said:
oops, it's a bit late. I found the goomanager and installed it, trouble is I installed the OTA update which has set my device unrooted. There is no TWRP any more, not sure how to get into recovery mode as a dead android with a red triangle appears. I'm unlocked, but just cant get into recovery.
I took a full TWRP backup before I started, any tips ?
Click to expand...
Click to collapse
Just use ADB to Fastboot flash recovery. Either Fastboot flash your root file or copy it to your device. If you copy it to your device, then boot to recovery and flash your Superuser or SuperSU .zip. You don't want to restore your backup though if your on the latest OTA now and your backup is the previous OTA.
SwiftKey'ed from my White Note 2 via XDA Premium HD
Wug works well.. Simple too.
Sent from my Nexus 7 using xda app-developers app
theres TWRP flashable zips in the TWRP thread, this is the easiest if you alrady got TWRP
you can use wug to install it for the first time then use goomanager to update it later or TWRP manager to dl manually.