Related
so with my minimal knowledge of phone stuffs ive kinda learned that when i run the wireless tether for root app on my phone it uses ad hoc to supply other computers with internet... basically im asking, will my evo be able to supply my xoom with internet?
Not at the moment, no support for Ad-Hoc networks in HC, not sure if there ever will be - very annoying.
I'm not sure but I believe there is a new version of Wireless Tether that will allow such a connection. When I first tried the Kindle connecting to my DX, it wouldn't connect. With the new version, it does.
Sent from my DROIDX using XDA App
My Xoom connects to my DX with no problems.
Go download Wireless Tether from the website. The experimental one is called Wifi Tether now. Works like a charm for infrastructure mode so that the Xoom can tether with your phone. Also Bluetooth seems to work fine as well.
Sent from my DROIDX using Tapatalk
Is the Wireless tether for the phone or the Xoom (or both)? I need an option for the iPhone in case the steps posted here won't work!
is this an app that enables ad-hoc detection on the Xoom,
or
does it just provide a full wifi hotspot tethering feature for Android devices?
I also use an iPhone which supplies an ad-hoc hotspot connection that I need my Xoom to recognize and connect to.
So does that mean you got it to work that way? Is the app available through the Market?
No its not available in the market. Google wireless tether and look for wifi tether. The new app sends the signal via infrastructure mode. I think it applies to certain phone like Droid X and EVO.
Sent from my DROIDX using Tapatalk
The Wireless Tether app is ran on the host phone wanting to be turned into a wifi hotspot. There are certain phones that run in Ad-Hoc mode in default (aka Droid 1) and the only option to tether the Xoom to them is via bluetooth. As others have said, the new version "WiFi Tether" is apparently enabling infrastructure mode rather than Ad-hoc mode, something that the Xoom can actually connect to.
There is no app that you install on the Xoom. When the WiFi Tether is ran on the host device, the Xoom just connects to it as a WiFi router and works just fine (or bluetooth if thats what you're doing).
So OP, if you can't get the new version of WiFi tether to work for you and your Xoom, try the Bluetooth tethering option, it's been shown in detail in a thread here how to do it, and it should work just fine.
funnycreature said:
Is the Wireless tether for the phone or the Xoom (or both)? I need an option for the iPhone in case the steps posted here won't work!
Click to expand...
Click to collapse
The app is for android, and for the host device not the Xoom, so you'll need to Bluetooth tether your iPhone.
wpa_supplicant
I understand exactly what the OP is talking about, as i'm trying to do the same thing. What makes matters worse, is that ad-hoc connections ARE possible in android. Meaning android can connect to ad-hoc networks, but it requires swapping out the wpa_suppplicant file in system/bin with a modified one that doesn't filter out ad-hoc networks.
i've even tested this on my EVO, and it connects to other android phones incapable of broadcasting in infrastructure mode, it even connects to my ubuntu netbook broadcasting in ad-hoc...
(if you want to see what i'm talking, just search the forums for wpa_supplicant, something will turn up )
I've tried doing the same "fix" with my xoom, but it doesn't take. Using ADB or root explorer, i've replaced the orignal (making sure to save a copy just in case) and fixed permissions to 775, but it doesn't take. The wifi antenna will turn on, but it doesn't find anything once being replaced, not even saved networks or access points. I can get wifi back by restoring my backup, but i'm at a loss as to why it doesn't work on the xoom (3.0) but does with my evo (2.3).
as a side note, i'm using the right replacement for the wpa version returned by entering
"wpa_supplicant -v" in a terminal emulator or adb. It returns version v0.6.10 and there is a working, modified, v0.6.10 that should make things work, but doesn't....
anyway, if anyone has any input, i would love to hear it!
I am in the same boat. Regardless of whatever permission settings I have tried (mentioned in the dev forums that I can't yet post in), I still get a dead wifi with the new supplicant file.
Ah, I feel better now. It must have been the supplicant file, as I found this other one and it worked without permission modifications first time out.
You will have to google "xoom supplicant" and use the file found on the first response (android.net)-I can't post the link- the downside to attitude having, overlord type forums is inability for new users to provide any help, or at least with any convenience.
i try connecting my xoom to my computer, and it wouldn't work. i have the "Intel My Wifi Technology" but each time i set up a connection, the xoom finds it, but will take like a minute trying to connect and all i see on the xoom is "Obtaining IP address". it shows on my computer that a new device is connected. maybe this only works computer to computer. cuz i have had success with another laptop connecting to my computer with no problem.
I am using the Launchpad kernel and the WPASupplicant file and am connected to my phone's ad-Hoc network now. I used the beta Wi-Fi Tether and it worked great, but crashed my Samsung Galaxy S at least twice a day. So I installed the WPA file without setting any special permissions, just used Root Explorer to copy it an it worked fine.
Is there a way to connect on a ad-hoc hostet by a laptop (win7) yet?
That would be interesting, cause if it work this way, it will work for every phone or something else!
Hey Guys,
i am having a little problem. i am using the Intel My Wifi Technology. and i don't know if i am doiing something wrong or this is just not possible. but i try connecting my xoom to my laptop, and it is not working or connecting. i get a message on the xoom that say's Obtaining IP address", but nothing happen on the xoom. is this not yet possible on the xoom. i don't know if this is consider ad-hoc network or not, cuz i am new to all this.
but here is the link to intel website for the program i am using as a wifi hotspot.
http://www.intel.com/products/wireless/mywifi.htm
and here is a video of what the program does.
http://www.youtube.com/watch?v=AuAQjR76A68
anyone with knowlwdge on this please help me understand what i am doing wrong or not doing. or even if this is a possibility.
If you're not opposed to rooting your Xoom, here's another option. I just unlocked and rooted my WiFi-only Xoom yesterday, and inserted the supplicant file in this thread: http://forum.xda-developers.com/showthread.php?t=1033314
It works like a charm! I'm running a WinMo Touch Pro 2 with WMWiFiRouter, and the Xoom now sees and properly connects to Ad Hoc networks. And, it still works with all other networks.
I don't know which way you prefer to attack the problem (from the Xoom or the phone), but I've been thrilled ever since I got all this done yesterday. Everything else on the Xoom is great, and now I've got the working SD card as well.
supremecream06 said:
Hey Guys,
i am having a little problem. i am using the Intel My Wifi Technology. and i don't know if i am doiing something wrong or this is just not possible. but i try connecting my xoom to my laptop, and it is not working or connecting. i get a message on the xoom that say's Obtaining IP address", but nothing happen on the xoom. is this not yet possible on the xoom. i don't know if this is consider ad-hoc network or not, cuz i am new to all this.
but here is the link to intel website for the program i am using as a wifi hotspot.
http://www.intel.com/products/wireless/mywifi.htm
and here is a video of what the program does.
http://www.youtube.com/watch?v=AuAQjR76A68
anyone with knowlwdge on this please help me understand what i am doing wrong or not doing. or even if this is a possibility.
Click to expand...
Click to collapse
Is it right that you host a Wifi on your computer and tether internet to you tablet? I think its the usual problem android and ad-hoch, witch not work!
Just picked up my TF today, updated to 3.1
I have a main router at my house and two bridged repeaters (dd-wrt) sending the signal everywhere so I have coverage. Here is the strange issue:
I can connect via wifi just fine to my main router, but I can't to either repeater. The TF says I am connected, but the wifi symbols stays gray, and doesn't connect to the internet. Other devices connect fine to the routers, even my droid 2 global has no issues.
Anyone else experiencing anything like this? Strangest wifi bug I've ever experienced, i'm stumped.
I've tried the following:
Channel Changes
Open security
Router Reboots
Any advice would be appreciated!!!
just tried connecting to my dd-wrt for the first time reading your post, and it worked fine... I am running prime 1.4 if that happens to have anything to do with it.
Have you tried static IP on your TF?
dan-htc-touch said:
just tried connecting to my dd-wrt for the first time reading your post, and it worked fine... I am running prime 1.4 if that happens to have anything to do with it.
Click to expand...
Click to collapse
A repeater? Or direct router?
I have tried static ip, no avail.
I also have an annoying wifi issue as well. When my transformer comes out of sleep it seems to be connected to the wifi but I can't surf the net. I need to turn-off wifi and turn it back on to make it properly work.
Using Prime ROM v1.4 and the wifi uses WPA.
I should have also mentioned, that despite being "connected" I still cannot visit the router gui via the TF's browser...
alansgabriel said:
I also have an annoying wifi issue as well. When my transformer comes out of sleep it seems to be connected to the wifi but I can't surf the net. I need to turn-off wifi and turn it back on to make it properly work.
Using Prime ROM v1.4 and the wifi uses WPA.
Click to expand...
Click to collapse
+1... I am annoyed with this as well...
mine is a bridge, with it's own ssid
still can't figure it out
I'm considering flashing to prime 1.4 to see if that will help. does anyone know if there are different wifi drivers on prime 1.4 vs stock 3.1?
thx
Have you tried flashing the latest firmware to you repeaters?
alansgabriel said:
I also have an annoying wifi issue as well. When my transformer comes out of sleep it seems to be connected to the wifi but I can't surf the net. I need to turn-off wifi and turn it back on to make it properly work.
Using Prime ROM v1.4 and the wifi uses WPA.
Click to expand...
Click to collapse
Same issue was happening to me on stock rom. I changed WiFi disconnect policy from "Never when plugged in" to "Never". The issue is now gone but battery goes a little quicker now...
Do you know if you have an access list setup on your router? Your access list maybe bllocking your tf from connecting
The first thing I would do in your case, OP, is to disable all security, mac filtering, passwords, etc and see if the Asus will connect or not.
I'm using Prime 1.4 and have no problems connecting to my wifi network using WPA2.
I have...
(1) - Verizon Fios - Main router - no wireless broadcast - DHCP on
(2) - Linksys E2000 - DD-WRT - wired ethernet to main router - broadcasting SSID - DHCP off
(3) - Linksys E2000 - DD-WRT - wired ethernet to main router - broadcasting SSID - DHCP off
Unfortunately, I'm not doing the wireless bridge repeater mode but I haven't noticed anything particularly different about the Asus's wifi.
My wifi is always on, I don't use any of the battery saving modes.
figured it out
After trying a bunch of various resets and google searches, it turns out that the only way for me to connect to a bridged router is by using static ip's and making sure the dns was set to find my main AP.
Its strange that i would have to go through so much manual setup, when all other devices work just fine.
I just took the plunge in to sd android on my TMOUSA HTC HD2.
I am using AmeriCanAndroid all stock HD2.
Previously I was able to tether to a vista laptop with wm6.5 fine. I am trying to use the wifi tether on the the android side now.
My goal is to tether to a unrooted Acer A500 Iconia. I am not sure if it is possible. I have read a ton and can't seem to find a clear answer to this problem. Several people talk about rooting the A500 so it can see a ad-hoc wifi tether. Unless I misunderstood I also read that a rooted android phone could be a real wifi hotspot not just an ad-hoc connection. I am not sure if I am mistaken or not. If someone could clear this up it would be great.
I am not sure if I am doing the tethering correctly on android. I setup the tethering with a SSID, encryption and the like. the A500 sees the wifi SSID but can't seem to obtain a IP address.
The odd thing is that when I start the wifi tether the yellow wifi icon starts in the top right corner of the phone. Then another wifi looking icon starts next to it. it says tethering and wifi hot spot. I have tried using it also but the system locks and reboots. if I don't mess with the second tethering and wife hotspot it doesn't reboot, but i still can't connect.
The strange thing is that the main tethering lets me setup SSID and the like but the tethering and wife hotspot will let me setup a different SSID. I am not sure why they aren't connected.
I thought this all had to do with the unrooted A500 but I tried the same windows laptop that I had tethered to with wm6.5 and it can see the wifi on the phone but can't connect.
Thanks for any ideas.
Hey all,
So I've been tethering wifi from my Evo 4G to my A500 for some time now, and only in the past few days has it decided to stop working. I've encountered the bug where it loops trying to obtain an IP address until it gives up (connection disabled). I've tried deleting the dhcpd-wlan0.lease under /data/misc/dhcp, paperclip resets, deleting all remembered connections, creating open and secured connections, and nothing seems to work.
I'm running Taboonay 2.2 on the A500 and Fresh Rom on the Evo. Strange thing is that when I'm home, it connects to my router with no problem, so it's just the tethering that's screwy. Anyone have any idea how to fix this?
In the past this is what I have seen people do (as well as me) with some success.
Attempt to connect to the network, when it fails, forget the network and reboot the tablet. When it reboots, try to add again. If it doesn't work again click to forget the network again and reboot. Sometimes this takes 3 or 4 times to start working again. Maybe this will help maybe not?
Try turning wifi off in settings (uncheck box), wait a sec and then turn it on again.
You have to root your Iconia tablet. Then replace ad-hoc file. This tablet will not tether to ad -hockey networks stock.look for instructions on this forum its all over on how to do this.
This has been answered many times since the day this tablet hit the market.
Back in April.
Google (XDA ad-hoc tether for acericonia a500)
erica_renee said:
You have to root your Iconia tablet. Then replace ad-hoc file. This tablet will not tether to ad -hockey networks stock.look for instructions on this forum its all over on how to do this.
This has been answered many times since the day this tablet hit the market.
Back in April.
Google (XDA ad-hoc tether for acericonia a500)
Click to expand...
Click to collapse
He has been using it fine, with no issues until now. I use my stock A500 and my G2 to tether all the time.
I had the same problem with my A500 when I first got it, and a Toshiba Thrive when I got that as well. This was my home network though. Resetting the router solved the problem for me. I have had no issues since then.
I figured out what the problem was: the Wifi Tether app is just buggy as hell. For some reason, whenever I switched the tethering on, it also triggered the phone's wifi toggle on, which blocked the tether (I think). Flipz actually unlocked the official hotspot on the Evo 4G because of this, so I've been using that and it works just fine. Thanks for the help, though!
erica_renee said:
You have to root your Iconia tablet. Then replace ad-hoc file. This tablet will not tether to ad -hockey networks stock.look for instructions on this forum its all over on how to do this.
This has been answered many times since the day this tablet hit the market.
Back in April.
Google (XDA ad-hoc tether for acericonia a500)
Click to expand...
Click to collapse
He mentioned using Taboonay, so must be rooted...
There is an issue I'm having with the Kindle fire & 3rd party roms which also happens to be a LONGstanding issue with wifi connectivity I've had in the past.
Specifically, devices I've owned, like the kindle here will not connect to a wifi router in our house. It has wpa2 which I am not about to remove. The kindle in stock form will connect to it, running energy rom & Miui will not. Now I know their are caveats with these roms and I accept that but I would like to know what specifically is causing the issue. The device will see the router and get stuck at the "obtaining IP address" part. Each time, without fail, gets stuck in the same place. Ive used 3rd party utilities in the past to try and connect but no luck.
FWIW: I have a router in the basement, also with wpa2 security and devices NEVER have a problem connecting to that, I repeat NEVER! I have a phone, LG Thrill which has never been able to connect to the problematic wifi spot, even with stock firmware.
The problematic router is a Airport Time Capsule, latest gen. The one in the basement is an older gen airport extreme.
Have you tried connecting with static IP, netmask, etc settings? Have you tried turning off encryption for troubleshooting purposes? Do you know what channels the two access points are using?
Sent from my Kindle Fire (CM7) using xda premium
No guarantees, but something you could try is:
Make sure IPv6 is disabled on the AirPort Time Capsule. IPv6 uses multicast instead of broadcast for DHCP addresses and as seen in the UPnP thread, multicast breaks all the cm9 based KF roms at the moment.
jd