[Q] Baseband broken? [half fixed] - Defy Q&A, Help & Troubleshooting

HI, everyone
i got a problem with my defy recently.
i was running CM7 by Epsylon3.
As we all know, this rom comes with defy basebandswitcher v4.0, and it works well.
Yestoday, i want to update this "BBS" to v4.1. but when i uninstall v4.0 and install v4.1(http://forum.xda-developers.com/show....php?t=1203297), open it , it shows "unable to detect your baseband configuration, it's possibly damaged."
then i reinstall v4.0, but i cant find it in app drawer. i'm sure it's installed and i can see it in "setting-->applications-->manage applications" also in "dev tools-->package browser".
i tried the method in this thread: http://forum.xda-developers.com/showthread.php?p=21844497 . I renamed "system/etc/motorola/bp_nvm_default" and reset it to default use v4.1. but no new filefolder "bp_nvm_default" generated. and the problem still exist.
i also flashed offical SBF file 3.4.2_179-4.4(VFSBLUR) , 3.4.2_177-005(NORDIC) and reflashed CM7. still cant find app with v4.0 and the same message with v4.1.
Edit:half fixed... I reflashed stock sbf (different versions) several times , then flash CM7-11 again, after a bootloop, pull out the battery, power up, the "BBS" v4.0 bundled worked normally. but v4.1 still doesn't work.
Another question, i got a FOTA (com.motorola.process.system) FC. Maybe i should repost another thread. There is no responding here. Sorry for my poor english....

Related

No service or signal after flashing any rom

Ok so I've searched up and down and can find nothing so far. Here's amy Phone specs
Phone: Rooted G1
SPL: Danger SPL
Radio: 6250S.20.17U_2.22.19.26I
ROM: CyanomenMod 4.2.14.1
Ok now whenever i flash any rom on my phone whether it is super D, htcclay or cyanogen I get no service and just an x next to where my signal bars are. When I go into settings it under the baseband version it just shows unknown. The only way I can get things back is if I restore from nandroid backup of version 4.2.14.1 i had. Even if I try flashing version 4.2.14.1 fresh it does the same thing, no signal/service. Whenever flashing roms I always wipe multiple times before and that does not work. I try flashing the radio beforehand then flashing the rom that also does not work. I've followed numerous instructions to the letter in the development section for flashing roms but none seem to work. The roms ALL install perfectly but I just get NO SIGNAL after the install. Can anyone assist and tell me why this is please.
Also if I try to flash the new G1 radio 2_22_23_02 it doesn't flash at all. It will install when in the recovery mode and when I hit home+back to reboot it shows the htc logo for a quick second then disappears. When it restarts in recovery mode and I boot the phone up again it still has my original radio. Any assistance is appreciated. I've searched and can find nothing on my particular issue.
I'm having the same problem, except I got there a different way. I was rooted on JF 1.51 and decided to unroot. I flashed the original G1 bootloader and then loaded DREAIMG.img. I waited for the OTA update, and when it did, that's when I had the problem. I've tried manually updating to RC30, RC33, which work just fine, but as soon as I install anything higher than that, the problem starts. I do not know if the unknown baseband version symptom existed with any of these other attempts. Also, a force-close message for com.android.phone repeats endlessly. I tried to check the APN, but when I try to click on Settings -> Wireless -> Mobile networks, it won't open.
Phone: G1
Firmware: 1.6
Baseband version: UNKNOWN
Kernel version: 2.6.29-00479-g3c7df37; [email protected]#19
Build number: DMD64
One last thing: As I was trying things earlier, I started getting a "No SIM card" error so I went to T-Mobile today and got a new one. I don't know if these two things are related or not, but thought I would mention it.
have you try do update Radio??
Do you mean in addition to the OTA update? No. I loaded the DREAIMG file, and then updated with
1. signed-RC30-from-RC29-fat.1582cace.zip
2. signed-PLAT-RC33-from-RC30.zip
When the OTA comes, that's when the problem happens, but I have not tried to update anything after the OTA installs.
I thought that the issue might result from updating too much at one time (e.g., RC29 or RC33 all the way to Donut), but when I then try to update to Cupcake with signed-kila-ota-148830.de6a94ca.zip, then the phone gets stuck in an endless loop on the Android screen. No matter what I do, I can't upgrade above RC33.
I just had the same thing happen although my methods were different.
Basically there is no baseband which means (I think) there isn't
going to be any network activity.
My problem is much worse I'm afraid.
I swapped the Phone.apk from my system/app location,
grabbed another Phone.apk (assuming it was the dialer) because
I liked the theme...so I swapped, rebooted and bam, FC's every second
and then zero network activity.
So I had to use wifi, downloaded rom manager again, and root explorer
and had to reflash the base band...It is flashing right now, and I'm just waiting.
Clockword recovery was borked so I used Sprecovery.
SigmunDroid said:
I swapped the Phone.apk from my system/app location,
grabbed another Phone.apk (assuming it was the dialer) because
I liked the theme...so I swapped, rebooted and bam, FC's every second
and then zero network activity.
Click to expand...
Click to collapse
Phone.apk is the dialer, I swap mine out all the time. However, you have to make sure that it's compatible with your rom (i.e. similar framework, same build as yours, so if you have donut, only donut phone.apk will work)
Are you sure that you grabbed it from an actual rom and not from MM theme which has only drawables?
borodin1 said:
Phone.apk is the dialer, I swap mine out all the time. However, you have to make sure that it's compatible with your rom (i.e. similar framework, same build as yours, so if you have donut, only donut phone.apk will work)
Are you sure that you grabbed it from an actual rom and not from MM theme which has only drawables?
Click to expand...
Click to collapse
Hey man.
Yup, I'm sure, however when I did the search I didn't think it would
link me to a different forum since I'm running a Moto Droid 1
with BB v0.4 The dialer for that ROM is in contacts.
Anyway my phone technically died.
Was resurrected and now I'm running Liquid's Tangerine Frozen Yogurt 1.4
(which is the fastest/snappiest and most responsive ROM I've ever tried!)
It's also the 2nd ROM I've tried but still.

[Q] [SOLVED] No service or battery status after installing latest Cyanogenmod 7

Tried searching the forum but couldn't find anything similar.
I rooted my ideos x5 with super one click, installed clockwork mod (perfect recovery by genekolar) and then installed genekolar's newest cyanogenmod [unofficial]. Tried installing 2 times with different downloads, wiping everything both times but I get no service or battery status. I checked my sim card, battery, booted the phone multiple times and checked my APN settings, the phone just doesn't find anything.
I would like to have gingerbread on my phone without installing the official one.
I also tried the MIUI rom but it stuck to the booting screen blasting that welcome jingle full volume every 3 seconds.
Any solutions?
Thanks!
This has been written for 1000000 times. You must update to official 2.3.5 if you want to use .35 kernel ROMs. If locked bootloader is what scares you then you dont need to worry because blefish already found a way to unlock it (http://forum.xda-developers.com/showthread.php?t=1457490). If you still dont want to update to offcial 2.3.5 then you can use .32 kernel ROMs
Oh, my search-fu wasn't good enough this time. Being noob 'n all. Thank you for informing me! I'll change this to solved and leave it here if anyone else is having the same problem
Thank you!!

wifi ''error'' and restart

like the title says everytime that i install last oxigen and last cm7 .32, i try to turn on the wifi and the phone restarts and after i try to turn in on again and it gives to me the error.
is there a way to fix this, because if i use miui and the stock rom i can use wifi without any problems but with this two is impossible.
i have already install first a stock rom the b138 and after the cm7 or the oxigen but the final resoult is aleways the same,
help people since i can use the new rom, the .35 version, because of my touch atmel.
thank you
Check if you have imei=0...
Your only solution for that will be to use stock rom or FLB
yes, my imei is 0, but i have done the backup and i put it on the place and restat the phone and the problem continues

[Q] Everything gone wrong.

It's currently 7am on monday morning, and I have college. I haven't slept at all because my [red lens] defy has been giving me problems.
I've been trying to re-flash CM7 to get a clean install of it, with no frills/apps that I've installed over time.
I've done a factory reset through CWM, and re-flashed CM7.1 from here:
http://download.cyanogenmod.com/?type=stable&device=umts_jordan
I've tried finding GApps for this, but to no avail. None of them install properly (CWM says they have, but actually hasn't - It's nowhere on my app drawer/home/manage apps).
I've tried adding an account to sync but when it asks what google products I want to install (such as YouTube, Maps, StreetView), it crashes mentioning "process com.teamdouche.pacman"
That's problem 1
Problem 2 is my Home and Search button no longer work! I've tried everything I could google for, but nothing has helped.
[Edit: they do vibrate, but nothing happens]
Any help on these matters would be much appreciated, as this is really annoying :/ Thanks.
Also I've just realised the apps in Manage Applications are all my old apps, even though I've actually formatted my SD card in CWM since, each has a SD card icon, and is taking up 0.00B space,but I'm just wondering how they even show there..
Did you try flashing the CM7 kernel ?
Or did you mount /system ?
Herpderp Defy.
Here's my About Phone info:
Android Version - 2.3.7
Baseband Version - EPU93_U_00.59.01
Kernel Version - 2.6.32.9-gb08c3c8 [email protected] #1
Mod version - CyanogenMod-7.2.0-RC1-Defy-KANG (CM7 White Rabbit)
http://forum.xda-developers.com/showthread.php?t=1510063 <- WhiteRabbit
Do you have a link to the CM7 Kernel? :S
System is mounted
I've managed to get Market installed, but it only opens once, and when I try to download something it Force Closes, and then after that it force closes when I open it.
Flash stock rom for noow ....
Sent from my MB525 using XDA App
dude, restore stock room, and try flashing an official cm7, what i think is that the room that you flashed is corrupted or something like that
1º: Reflash a stock room
2º: Get a official stable CM7 room ( http://download.cyanogenmod.com/?type=stable&device=umts_jordan )
3º: Don't forget to wipe all data, cache and dalvik cache.
4º: See if that works and thank me for this
EDIT:
Here is a link to Gapps, just in case (http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip )
good luck with your defy

[Q] Problems Multiboot

Hi,
I'm trying to use Multiboot on my defy (Red lenses and GB kernel). My original rom is the latest CM9 by Quarx.
Every ROM I installed (I tried MIUI V4, XIUI and CM10, all for Defy+) I get com.android.phone FC and, I think its because of this error, i cannot find network (yes, I tried to switch my baseband to the correct one).
I tried Multiboot v0.6.1 and v0.5.1 and get the same error. I tried v0.7 with TWRP, but with this I stuck at Motorola logo.
Its the firist time i'm trying to use multiboot, I did all the steps of more than 1 tutorial and give me the same error. Anyone know something I may have missed? I'll keep trying and if I got something i'll post here.
Thanks.
did you get multiboot working?
if not, what error does it gave??
and what steps did you followed???
Basically I instaled multiboot V0.6.1, then installed Multiboot Manager Free and created an image with cache: 150Mb, data 250Mb, and system: 350Mb. Then I flashed one of the ROMs tha I mentioned.
I get it working, I can load the system, conect via wifi, navigate and etc, but after startup I get com.android.phone FC and get no signal. This happened with all the ROMs tha I've installed.
EDIT:
It seems that I could solve it, I uninstalled Multi Boot Manager and installed Vibhinna, deleted the old system image and did everything again. Now I get no errors.
Thanks.
You should also be aware that if you have a GB base ROM you should download the Defy+ versions of the ROMs you want to use in multiboot.

Categories

Resources