Related
hey guys
Today, I mean, yesterday I brick my X10 with setool
EROM "R8A013" AID: 0001
SOFTWARE AID: FFFF
LOADER AID: DEAD
FATAL ERROR " (SIN_header_verification_failed)" IN "SECURITY_CLASS"
error while uploading HDR block
LOADER NOT STARTED
FAILED TO SETUP PHONE
Elapsed: 15 secs.
Click to expand...
Click to collapse
I think I restored a wrong GDFS and my phone is dead
I tried to flash with setool, flashtool and nothing, computer detects the phone but flashing stuck on start.
Today I went with my operator for warranty purposes, and my phone will back to me after 15 days, I think maybe I will change my phone for an Atrix.
Well, I need to wait a few days for that.
Thanks to all, devs, users, and all X10 community for help to make this first Android Xperia one of the sexiest and powerful in past time.
I hope I find my way back to Sony Ericsson, maybe some dual or quad core is what I will be hope.
oooh yeaah and thanks Trip for your awesome gingerbread miui, its the best x10 rom ever.
I hope see you soon pals
That is impossible to brick whit seus and always repairable whit flashtool.
Sent from my X10a using XDA Premium App
shahkam said:
That is impossible to brick whit seus and always repairable whit flashtool.
Sent from my X10a using XDA Premium App
Click to expand...
Click to collapse
He meant not SEUS, but SeTool box software.
shahkam said:
That is impossible to brick whit seus and always repairable whit flashtool.
Sent from my X10a using XDA Premium App
Click to expand...
Click to collapse
Yeep I flashed a different GDFS backup with SETool, and since bootloader is locked here is no chance to fix.
Alejandrissimo said:
Yeep I flashed a different GDFS backup with SETool, and since bootloader is locked here is no chance to fix.
Click to expand...
Click to collapse
Have no idea what is that but maybe try flashing stock kernel it wont help?
Sent from my X10i using XDA Premium App
shahkam said:
Have no idea what is that but maybe try flashing stock kernel it wont help?
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
No able to flash anything with any tool, even setool itself.
Alejandrissimo said:
No able to flash anything with any tool, even setool itself.
Click to expand...
Click to collapse
You can flash with some 1.6 firmware. I had the same problen and did repair with 1.6.
I was planning to unlock my bootloader today. When I tried to open the Sony ericsson page, its showing the page is under maintenance. Are you guys getting the same response from the sever? Or did Sony completely stop the bootloader unlocking?
Sent from my R800i using XDA Premium App
Same question here. I tried it since yesterday and that feature is under maintenance till now. I am planning to unlock R800i. Did Sony Ericsson stop the bootloader unlocking and if so, any alternative to unlock bootloader may I know? Thanks in advance.
Well, we will see. Hopefully its just a real maintenance, but maybe they are fixing the hole which the guys used to unlock cdma phones.
Let's hope it comes back to life soon!
Regards
I guess they're fixing CDMA keys hole. Looks like Verizon isn't happy about it.
But I don't understand why it takes so long to modify some small piece of code to disable MEID calculator.
Maybe you DDOSed them too much ?
Regards
Thanks guys.
Sent from my R800i using XDA Premium App
Bin4ry said:
Maybe you DDOSed them too much ?
Regards
Click to expand...
Click to collapse
Lol..
Sent from my R800i using XDA Premium App
Bin4ry said:
Maybe you DDOSed them too much ?
Regards
Click to expand...
Click to collapse
Heh, technically, I wasn't there when it crash happened, so I gave server the opportunity to recovery from requests and free up resources
Unlock bootloader is back, wish me luck all
jasmine106 said:
Unlock bootloader is back, wish me luck all
Click to expand...
Click to collapse
how did it go?
Very smoothly. Now on stock with doomlord's kernel.
Sent from my R800i using XDA Premium App
3G & WiFi missing
solitarymonkey said:
how did it go?
Click to expand...
Click to collapse
succeeded, but with a little problem. Could any1 pls help me?
i followed Bin4ry's guide [How-to] Root your Play.
On the first try of flashing system with play_modded, i got some error message like android.process.acore & android.process.media has stopped unexpectedly, so I soft reset it to factory setting and flash system again and succeeded, with no error message.
But the problem is after the root process, my phone can't detect 3G network. The service provider I am using has two options, 2G and 3G, and phone can only detect 2G network.
Another problem is that although I can find WiFi networks and connect, WiFi connection is not working anymore (no data send/receive through WiFi).
If any of you know how to fix that 3G network & WiFi missing issues, kindly let me know. Thanks in advance.
One more, my rooted play is now on 3.0.A.2.184 build and when I connect it to computer, PC Companion said found new software update and ask me whether want to update or not. Rooting process will be overwritten and I will need to root it again if I update software (base 3.1.A....something I think) I would like to know.
Thank you again.
Regards,
edit : sorry if this post should be under Q & A section, please let me know and I'll open a new thread
Im assuming you have a r800i? If so, my simple recommendation would be to flash 4. Firmware. Then enter fastboot and flash dooms kernel which will automatically root it for you. Hope this helps.
Sent from my R800i using XDA App
solitarymonkey said:
Im assuming you have a r800i? If so, my simple recommendation would be to flash 4. Firmware. Then enter fastboot and flash dooms kernel which will automatically root it for you. Hope this helps.
Sent from my R800i using XDA App
Click to expand...
Click to collapse
ႊThank you. Could you please elaborate more as I am new to android, or please let me know the location (in this forum?) where I could get detail instructions, like, where to/how to get flash4.firmware, flash dooms kernel?
Thank you again.
Sorry, I forgot to mention that I've updated to 4.0.A...(i followed the instructions found here, used X10Flash Tool and Xperia_Relock_bootloader.ftf to get bootloader locked, and use PC Companion to update s/w.
jasmine106 said:
ႊThank you. Could you please elaborate more as I am new to android, or please let me know the location (in this forum?) where I could get detail instructions, like, where to/how to get flash4.firmware, flash dooms kernel?
Thank you again.
Sorry, I forgot to mention that I've updated to 4.0.A...(i followed the instructions found here, used X10Flash Tool and Xperia_Relock_bootloader.ftf to get bootloader locked, and use PC Companion to update s/w.
Click to expand...
Click to collapse
For starters unlock ur bootloader again, as you need it to flash the kernel (which in my opinion is worth keeping), then go over to the developers sub forum, download the UK generic 4.0.whatever the rest of the code is firmware, flash it with flashtool, the go to doomlords thread and download his kernel. All instructions you need are in the relevant threads, easy to follow. I would link them, but I'm away from my computer at the moment. And I cant link from my phone. Sorry. Hope all goes well!
Sent from my R800i using XDA App
solitarymonkey said:
For starters unlock ur bootloader again, as you need it to flash the kernel (which in my opinion is worth keeping), then go over to the developers sub forum, download the UK generic 4.0.whatever the rest of the code is firmware, flash it with flashtool, the go to doomlords thread and download his kernel. All instructions you need are in the relevant threads, easy to follow. I would link them, but I'm away from my computer at the moment. And I cant link from my phone. Sorry. Hope all goes well!
Sent from my R800i using XDA App
Click to expand...
Click to collapse
Thank you so much. It took me like 1 hr to figure all that out, but it worth
Now on 2.3.3, 4.0...368 built and 2.6.32.9-perf doomlord's Kernel.
And thanks a lot to the development team and everybody who's enlightened me on how to play with android.
It's time for [*ROOT required] application from droid market.
It's working great, really fast.
Sent from my R800i using XDA App
hi guys I've got a black X8 locked with H3G Italy. i was wondering if there's a metod for unlock it, thanks a lot.
There is pc programs but paid
-=PrimeHD=-8-=Alfs Kernel=-
can you indicate me one of theese sites? you can PM me too.
pochopsp said:
can you indicate me one of theese sites? you can PM me too.
Click to expand...
Click to collapse
google for omnius
I wonder if u will bring your phone to service, they wont do it for you... cause its hacked...
Sent from my E15i using xda premium
SafiXS said:
google for omnius
Click to expand...
Click to collapse
how much it takes? i can do it with 15 euros?
pochopsp said:
how much it takes? i can do it with 15 euros?
Click to expand...
Click to collapse
i think 12 euros...
i also have unlocked it with omnius.
when u will do this, also unlock bootloader with it.
after that you alway need the omnius client to flash custom kernel, flashtool will never work again.
You only need to buy a "single android unlock licence"
Or phone your network provider and ask them to unlock it, and you can still use flashtool to do stuff
Sent from my E15i using XDA
If you can unlock your bootloader just do it and then flash one of the roms we have available in our community.
If by any chance a message about "insert sim lock code" appears on boot just ignore it and then disable it on the network settings of your X8.
Voilá, "unlocked" at no cost.
Well today i was trying to install a custom rom to my friend's phone, i rooted the phone, installed CWM, and i tried to install CM7, but it gave me error, so i rebooted the phone, and it turned on normally, so i researched a little more and i saw that i had to unlock bootloader and update other things, i didnt know this because i have a galaxy 5 and you just have to root, install CWM and you are ready, so i tried to unlock boorloader to the x8, i executed msm7227 and there were some errors but at the end it said that everything was done, so i pressed a button from the phone, but nothing happened, so i tried to turn it on, but nothing happened, i pull off the battery and pull it on again but nothing, i tried everything so i realized it was hardbricked, now my friend is going to claim his warranty.
I told him that i never was going to touch his phone again xd, but maybe someday he will want me to install a custom rom on his phone, so my question is if there is someway to unlock bootloader, to a new phone, he may recieve a new one, so obviously is going to have a newer date, is there someway?
you have to install roms for STOCK kernel, no need to unlock bootloader, but i think its too late now lol.
maxee23 said:
you have to install roms for STOCK kernel, no need to unlock bootloader, but i think its too late now lol.
Click to expand...
Click to collapse
Yes xd, i just hope i dont have to pay him his phone xd
btw,there are good chance they will replace it with below 11w29 m/board.cause they will finished older s/part first.as i can remember,we have few member here just get lucky after put their phone on "death mode".
zmuhammx said:
btw,there are good chance they will replace it with below 11w29 m/board.cause they will finished older s/part first.as i can remember,we have few member here just get lucky after put their phone on "death mode".
Click to expand...
Click to collapse
Is that? xD may be i shud ask d ones bearing later versions to hardbrick their phones as soon as possible..
Sent from my XPERIA X8 using xda premium
dUnstein said:
Is that? xD may be i shud ask d ones bearing later versions to hardbrick their phones as soon as possible..
Sent from my XPERIA X8 using xda premium
Click to expand...
Click to collapse
no,whats done is done.all this guy can do is claim their warranty.as i says somebody just get lucky...
Yeah that's the best your friend can do...get the guys to give you a motherboard earlier than 11w29
A friend of my get a hard brick too...and he brick it agian and agian by unlocking it but the point is he change the board for free every time and now after changing the board 5 times he finally unlock it hehe
White Sony Xperia X8
Cypress Screen with 3M protector
11w34 unlocked bootloader
Now with Cm9 nAa kernel
Uhh.. That's weird. They let him change the board five times? :O
Sent from my XPERIA X8 using xda premium
dUnstein said:
Uhh.. That's weird. They let him change the board five times? :O
Sent from my XPERIA X8 using xda premium
Click to expand...
Click to collapse
Yep its covered under warranty.
Sent from my E15i using xda premium
NIMBAH said:
Yep its covered under warranty.
Sent from my E15i using xda premium
Click to expand...
Click to collapse
yea~he just destory four boards XD
White Sony Xperia X8
Cypress Screen with 3M protector
11w34 unlocked bootloader
Now with Cm9 nAa kernel
NIMBAH said:
Yep its covered under warranty.
Sent from my E15i using xda premium
Click to expand...
Click to collapse
But whould they, when they know that it happened cz of gatebreaking the phone?
Sent from my XPERIA X8 using xda premium
Trenico said:
Well today i was trying to install a custom rom to my friend's phone, i rooted the phone, installed CWM, and i tried to install CM7, but it gave me error, so i rebooted the phone, and it turned on normally, so i researched a little more and i saw that i had to unlock bootloader and update other things, i didnt know this because i have a galaxy 5 and you just have to root, install CWM and you are ready, so i tried to unlock boorloader to the x8, i executed msm7227 and there were some errors but at the end it said that everything was done, so i pressed a button from the phone, but nothing happened, so i tried to turn it on, but nothing happened, i pull off the battery and pull it on again but nothing, i tried everything so i realized it was hardbricked, now my friend is going to claim his warranty.
I told him that i never was going to touch his phone again xd, but maybe someday he will want me to install a custom rom on his phone, so my question is if there is someway to unlock bootloader, to a new phone, he may recieve a new one, so obviously is going to have a newer date, is there someway?
Click to expand...
Click to collapse
Keep trying with PC Companion!! And why you people unlock bootloader with msm7227??? When I unlocked with it, I have a lot of problems with signal,SIM card and s*it like that, so I try with flashtool and yes,everythings is good!
2010matej said:
Keep trying with PC Companion!! And why you people unlock bootloader with msm7227??? When I unlocked with it, I have a lot of problems with signal,SIM card and s*it like that, so I try with flashtool and yes,everythings is good!
Click to expand...
Click to collapse
Simple.
Flashtool = Safe but inflexible (in the name of safety they prevent you from unlocking BL with certain settings that sometimes really don't matter)
MSM7227_tool.exe is much more flexible, no restrictions, and IS AS SAFE as flashtool provided you read the guides properly and executed their instructions properly.
I might want to point out that Flashtool's BL unlock came directly from the MSM7227 BL unlock tools.
SpyderX said:
Simple.
Flashtool = Safe but inflexible (in the name of safety they prevent you from unlocking BL with certain settings that sometimes really don't matter)
MSM7227_tool.exe is much more flexible, no restrictions, and IS AS SAFE as flashtool provided you read the guides properly and executed their instructions properly.
I might want to point out that Flashtool's BL unlock came directly from the MSM7227 BL unlock tools.
Click to expand...
Click to collapse
i didn't know that. hm.. so when i decide to try to unlock my bootloader, would you recommend using MSM7227_tool.exe over flashtool? i've only used flashtool for getting out of softbricks. is it more complicated than unlocking with flashtool?
btw i have 11w48 so im prbably getting 99% hardbrick. lol. i'm just saving for a new phone before i take that plunge into the abyss.
dUnstein said:
But whould they, when they know that it happened cz of gatebreaking the phone?
Sent from my XPERIA X8 using xda premium
Click to expand...
Click to collapse
Lol how would they know if it's harbricked
Sent from my E15i using xda premium
cascabel said:
i didn't know that. hm.. so when i decide to try to unlock my bootloader, would you recommend using MSM7227_tool.exe over flashtool? i've only used flashtool for getting out of softbricks. is it more complicated than unlocking with flashtool?
btw i have 11w48 so im prbably getting 99% hardbrick. lol. i'm just saving for a new phone before i take that plunge into the abyss.
Click to expand...
Click to collapse
Er... I recommend you don't unlock BL, but if you must, Flashtool is less complicated to understand how to use, MSM tool is more flexible (doesn't force you to stock 2.1 before it unlocks BL ).
Both are basically one-click anyway.
SpyderX said:
Er... I recommend you don't unlock BL, but if you must, Flashtool is less complicated to understand how to use, MSM tool is more flexible (doesn't force you to stock 2.1 before it unlocks BL ).
Both are basically one-click anyway.
Click to expand...
Click to collapse
Hmm I used MSM to unlock my phone while I was on GingerXperia rom.
Sent from my E15i using xda premium
NIMBAH said:
Hmm I used MSM to unlock my phone while I was on GingerXperia rom.
Sent from my E15i using xda premium
Click to expand...
Click to collapse
Yeah, MSM will allow you to unlock regardless of os version, but Flashtool has some restrictions for safety's sake (though most are not needed).
SpyderX said:
Yeah, MSM will allow you to unlock regardless of os version, but Flashtool has some restrictions for safety's sake (though most are not needed).
Click to expand...
Click to collapse
Ohh I see
Sent from my E15i using xda premium
A lot of people know this ,but theres a lot questions that asking: How to root new fw. ?
Here is answer, offcorse you can flash DoomKernel on new fw
Heres video
NOOB GUIDE
which kernel did u use in video,was it 266 or 201 stock?
desmond462 said:
which kernel did u use in video,was it 266 or 201 stock?
Click to expand...
Click to collapse
I used DoomKernel but many users reported that WiFi won't work on new update.For me its working normally on 201
Sent from my C5303 using xda app-developers app
Can't open your video
Sent from my C5303 using xda app-developers app
and what about root on locked bootloaders ?
NikeSHX said:
and what about root on locked bootloaders ?
Click to expand...
Click to collapse
If you want to root your phone locked bootloader and you want it to use your original firmware, i suggest you to follow the other way of rooting.
Sent from my C5303 using xda premium
Version .266 rooted and no success on updating to .201
Hi there,
I have a Xperia SP build number 12.1.A.0.266, with CWM installed and rooted with Doomlord kernel.
Last week I received the notification to upgrade to version 1.201.
Via Sony Companion, no deal: there comes an error message (Error 2003) after the phone reboots.
Donwloading the new version directly by the phone and installing: Phone reboots, starts CWM with and error message (unknow package / unknow signature) and even trying to run that, I receive an error message and right then a warning, that root has to be rebuild.
I rebuild it, device reboots and nothing changes.
Any help on that?
Go to my youtube channel and find video called: how to fix stuck on sony logo, use that guide and youill fix the phone.....Link of channel is on my signature
Sent from my C5303 using xda app-developers app
KiaTheKing said:
Go to my youtube channel and find video called: how to fix stuck on sony logo, use that guide and youill fix the phone.....Link of channel is on my signature
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
Ehehehe, not really :laugh:
I guess I couldn't make myself clear, but the phone didn't locked or got stucked on Sony Logo.
Right after I fix Root, it reboots normally and continues working.
But still then, It wont upgrade to v .201 - wheter by Sony Companion or downloading via Update Center and flashing it on Recovery mode.
Both ways lead to Errors and I'm still working on version 0.266.
I'd appreciate any further videos with instructions or a solution on that =)
Btw, I've browsed some further and found on other xda forum a Greek .ftf file with v.201 to flash.
Should that be safe in order to upgrade?
hfcamilo said:
Ehehehe, not really :laugh:
I guess I couldn't make myself clear, but the phone didn't locked or got stucked on Sony Logo.
Right after I fix Root, it reboots normally and continues working.
But still then, It wont upgrade to v .201 - wheter by Sony Companion or downloading via Update Center and flashing it on Recovery mode.
Both ways lead to Errors and I'm still working on version 0.266.
I'd appreciate any further videos with instructions or a solution on that =)
Btw, I've browsed some further and found on other xda forum a Greek .ftf file with v.201 to flash.
Should that be safe in order to upgrade?
Click to expand...
Click to collapse
Yeah it will be Just flash like i showed in this video: https://www.youtube.com/watch?v=Sz3LVw_MfzQ
EDIT: For anyone who has problems with wifi after flashing DoomLord kernel, go and flash some of the roms for example: existenz!
Is this method for unlocked BL only?
le grande magnetto said:
Is this method for unlocked BL only?
Click to expand...
Click to collapse
Yup...
Sent from my brain using xda app-developers app
My mode is 5302.
Wifi not work.
So I down grad to .266 by using this kernel and flash stock rom .266.
Now my 5302 alive with CWM ^^.
ohmygel said:
If you want to root your phone locked bootloader and you want it to use your original firmware, i suggest you to follow the other way of rooting.
Sent from my C5303 using xda premium
Click to expand...
Click to collapse
Can you tell me the "other way of rooting" my phone with locked bootloader?
Can you add for Unlocked Bootloaders only? Otherwise it will be a bit confusing for the others
wifi
sir wifi not working please help
Wifi not working
Yeah, wifi connection won't work.
I'm using this version, without root and cwm...
Any Kernel for .201 version?